@kil5672 glad it helped and thank you!

Couldn't agree more. I watched a Video the other day on finding Panels, and I did their method, worked first time.... tried countless times after with no success. Good to see someone ACTUALLY explain how to use the equipment correctly rather than rolling a dice and getting lucky.

Thanks @EmissionGaming appreciate that!

Hey @digitalben420 that’s awesome to hear! Glad it worked for you. You’re welcome and thank you for the awesome comment!

Your welcome! Glad it helped you. Have fun!

That great!! Definitely glad that it helped you.

Hey @jamespahl3832 you’re welcome and good luck!

Hey brother thanks!!

Thanks @Aluzard

Would you mind elaborating a tad more :) 😅 do you mean like distance wise?

Those numbers are the RS signatures. When your pinging out you should be seeing markers and when your in scan mode you should see a readout on the right side of your screen that says rs signature. The numbers you’re looking for are 2000, 4000, 6000, 8000, 10000, etc.

@@TheMacedon Ye as Macedon said.

Thanks V!!

Hey there @Fydril thank you!

That’s great glad it helped and you’re welcome.

@michaelstevena230 glad it helped and your very welcome!!

@dumamilk no problem! Good luck!

Thank you @plusran

Thanks dude!!

Thanks Dracs! Yela ring does have the most followed by Arc L3 I believe. Good luck friend.

Hello and you’re welcome!

Thanks.

For me personally it still seems to be equivalent to the ping angle of the old UI. I used it as i did in 3.22 and it still gives me the same results. 0%=360° scan/ping radius; 50%=180° radius = only scans forward and so on. At least this is how i understand it and using it with that in mind i most of the time get the radar to do/see what i want (A high pirce/low ping angle also increses the range you can see and identify things. You just need to point it right at the target) I hope this is some usefull info o7

@@derdoofedoofmann i confirm this.

Absolutely!

thank you!

Hey there @0nurbis you’re welcome! I definitely think servers are an issue sometimes but I also think the panels sometime are spawned fully. Just my experience.

@@TheMacedon I try'd today, work like a charm, everytime ! Thanks again.

Hey that’s awesome!!! Absolutely no problem at all

Absolutely @gatorpika and your welcome!

That’d be nice

Hey @idrgian thanks!! It definitely happens a lot. I think it’s happening because the cargo gets duped so it thinks that you still have RMC or boxes on the grid even tho u sold it. Next patch should be fixing that.

Thanks! Yea u need to be in scan mode. Either nav scan or scm scan. You engage scan by pushing V. Hopefully that answers your question. @complacencymustendnow2635

Hey thanks for that.

Sure thing!

Glad it helped and thank you.

Absolutely @TemplarGuardian. Spent a little time messing with it but they are definitely not there but as u get close they pop up. Which make me think it’s probably server side. This way though it’s been very consistent.

@@TheMacedon I definitely can't always get all of the signals or contacts to show up, so hopefully they can fix that and give us a better signal when we get closer. Fix that and the RMC bug and it will probably be even more fun

Totally agree.

Thanks! I have them in a past video. I forgot to insert them in this one.

@aneh182 I meant to put in a picture of all the RMC signatures that your looking for but I do have another video where you can screenshot it . But normally what you’re looking for is rs signatures that are 2000, 4000, 6000, 8000, 10000, etc.. So your probably finding rocks because your probably seeing the wrong rs signatures.

Oh wow. Haha that’s crazy. Atleast it worked. 😁

Hey @wesleymcfarlane9612 absolutely!

There’s a bunch of different ones you can get into. The one I use is cru l1 to arc l5 and disengage your quantum between 12.5km - 13.5km away from arc l5. Since invictus tho I haven’t had much success out there.

I would just stay away from the arrow contracts unless you’re trying to level up your rep. The fracture mode breaks the ships apart and into smaller pieces then you can switch to the other mode [can’t remember the name] to suck them up into your hopper. Produces construction material “not worth money really tho” I might do a day in the life. Thanks glad you liked the video and thank you for explaining the PIERC that’s pretty much how I’m thinking of.

@@TheMacedon Thanks sir, so that's how to get construction materials (I want to fab a bunch of mini tool stuff!) Now I'm trying to figure out how people get 25 scu of rcm in the hold at one time, I can stack 22 boxes ok but no more than that!

I’m with ya. Definitely would like to see them come back.

Hey @mlegarth, have you tried selling at orison? Also it normally refreshes every 15mins.

Could be. It’s a little faster now I noticed.

@@cplsanders69 so CM isn’t really worth anything unless you have a reclaimer because it can hold so much more. But personally if your in it for auec you want to focus on RMC, it’s worth way more per scu. Panels I found to be best because there’s no buy in cost to salvage whereas ships you need to buy the contracts.

Yup that’ll work because you have some distance. They should disappear was my understanding if you got close like 4km and ping out.

Thank you and you’re welcome! I just go to Orison and sell. It’s definitely the fastest route. The yela ring has the most RMC and orison is right there.

Hey no worries and yes V is for scan mode.

Yes can you explain what pierce does and how to change it. Thanks

To increase or decrease the pierc % you scroll the mouse wheel up or down.

@joeblow9641 im not 100% sure but from the testing I’ve done I believe that the higher the pierc the more detail scan that it gives. To change your pierc % you scroll up or down on the mouse wheel.

Hey there and thanks! Pamela is a good way to make money with the reclaimer. I haven’t found a derelict yet and I’ve tried. Just been sticking to panels and doing salvage mission to change it up. The salvage missions aren’t as profitable but you still make something. Panels are still the way to go. Yela asteroid belt has the most just make sure you’re away from Grim and you’ll be fine.

@@TheMacedon awesome, thanks man. Have subscribed. :D

That’s odd. No idea actually.

Hi there and yes it does work with the reclaimer. It will disappear. Try increasing your pierc % at the marker and ping scan. Try like 50-75%. Then just follow your signal. Sometimes they take a min or 2 to pop in. It not really a knowing thing to go into third person cam it was more of a feeling. Yes panels are still multiples of 2000. Beat of luck out there.

@@TheMacedon Thanks, following your guide, i had good luck last night and got my 1st panels. I tried to use the claw over and over but it just didn't work. (It work fine for salvage contracts) so after struggling for 2 hours with claw i decided the claw may not work with striped panels. Also in my game the RECLAIMER text for signal strength was missing but i just estimated where 80% to 90% signal strength was and it worked. I run 3 1080p screens for a 5760 wide star citizen so sometimes my UI is screwed up so I am not sure if the missing text was a reclaimer bug.

Could just be bugged. Glad it helped and you were able to find them. The claw doesn’t work on panels.

Hey there @11ash1 look for rs signatures that are 2000, 4000, 6000, 8000, 10000 etc

Scroll wheel on your mouse with increase and decrease the %.

Hey there. You’re probably looking at the wrong rs signatures. By pushing V to go into scan mode when you look at an unknown marker you’ll get a reading at the right of your HUD must stay in scan mode. Panel signatures are 2000, 4000, 6000, 8000, 10000, 12000 etc. anything else is going to be rocks. Usually you’ll see 1800 1900 5400 those are all rocks and rock clusters. Hope this helps.

Hey so I’m not sure what pierc stands for. I’m 3.22 weeks had scan angles. 360 180 90 etc. 360 would be 360 degrees around your ship. 90 or more would center the scan. Now it’s in % and 100%=360 is what it seems like. You need a signal to be able to scan. So for example when you see an unknown marker it’ll say 100%. When you increase the % from 100 to say 50 you’ll get a little more info on location of the signal. For panels when you increase from 100 to 50 that original unknown marker will move slightly and then when you move it to 75 you might move it more or it’ll show multiple other markers inside that original unknown marker. While doing that and u get the multiple markers the signal should drop from 100 to 22-25% if you aim your ship at them and move the signal should increase leading you to the panel. Hopefully that makes sense.

Thanks. Sucks you were only finding rocks. Make sure you’re looking for the correct signatures. I have a video vulture guide that show the sigs your looking for.

My understanding is that the higher the percentage the more detailed the scan is supposed to be. For me when I scan from 10km away at 100% the markers appear. If I keep it at 100% and I’m closer like 4km they won’t it’ll almost go past them. So you would lower the % to get them to pop up again.

Hi there @SpecialJess2 You can take salvage missions, find panels. You can salvage any ship as long as the shields are off. If you take a bounty it should work just make sure it’s soft death.

@@TheMacedon thank you for responding so quick

Yes. The reclaimers that show up in bounties are worth a ton in salvage

@hczocker6367 yeah the servers are struggling the last couple days. You might just need to wait for them, could be delayed.

@@TheMacedon yep, worked perfectly today, made a mill in 2 runs, thx for the video!

That’s amazing!! Nicely done!!

@CitizenGVN the panels are RMC.

@@TheMacedon oh now that's interesting, may have to have a hunt then

Yeah they are definitely worth salvaging.

I can definitely try it out. I think the vulture would still be best because it’s more maneuverable. You do have a great point about being able to be out longer without needing to offload.

@@TheMacedon I don't have Reclaimer, I know it's big and slow, but vulture is starting to get annoying when you have to come back every 20 minutes to sell. I have 1 run for about an hour, and 40 minutes of them are landing, running to the point of sale, then returning to the ship, crafting more boxes, running to sell again, back to the ship, taking off, and only then returning to the salvage...

@@markkent729 Yeah it absolutely can be annoying. I also think that with .2 coming out we should be able to store the rmc in our personal hangars and collect as much as we want and then sell it. Im not 100% sure of this but that is my understanding.

@@TheMacedon I would be great if you could do tests between Reclaimer and vulture.

Sheesh that’s pretty impressive. Thanks for the tips. o7

It can be. I've had the best success selling at Orison. Hopefully soon they will get rid of the dupe.

It’s still the same. Multiples of 2000.

thanks

Try scanning them from 4km away then increase pierc to 50 or more and ping scan again multiple markers should show now. Then reduce your % to 50 and start moving closer your signal strength should not be 100% and should be increase the closer u get. For example the signal should drop somewhere to 25% and increase as you fly closer if your heading toward where the multiple markers are/were.

@@TheMacedon ok thanks I’ll give that a go. The markers just keep disappearing when I get close 😂 Heading to Yela now.

Good luck and you’re welcome! They do disappear after 3.5km - 4km (somewhere in there. Just follow the signal strength increase to about 85-95% they be there if not give it a minute. Try 3rd person cam to and look around your ship.

@darkspirit1747 basically think of it as 0% is 360 degree scan around your ship. The higher the % the smaller the cone is and the more detail it’ll pick up.

Yeah I understand. We were able to find derelict c2 and 890 in the halo before but I think they are removed or just super rare now. I would love for them to come back tho I really loved just hanging out there scraping. For now the panels work best for me anyways.

Oh no. Have you tried waiting for a couple minutes seeing if they pop up?

@@TheMacedon yeah idk why it happens hopefully next patch might fix it

@Danku777 oh no. It’s probably a server thing one thing I would try is give it a minute or two for them to pop up. They could just be delayed especially if you’re getting collision warnings.

Try another area of the ring if that’s where you are salvaging. I’ve come across some to that were already salvaged.

Oh no. Sometimes they do disappear just follow your signal %.

@montyzuma3621 try looking in the yela asteroid belt and rs signatures of 2000, 4000, 6000, 8000, 10000, etc. just yesterday I did 118scu from there.

Sorry to hear that. Look for signatures that are 2000, 4000, 6000, 8000, 10000, etc.

Really? That’s odd. You’re looking for rs signatures of 2k, 4k, 6k, etc. Also may want to swap servers too.

@@TheMacedonya all good i found one. ship blew up with 350k worth of salvage after the smoothest landing i could do. uninstalled the game and never touching it again. LMFAO gg

@@ZelForShort oh no!! thats sounds terrible sorry.

Yeah I’m sure it’s tough. Thank you!

Oh no. Salvage panels are 2000,4000,6000, 8000, 10000. Look for those and you’ll find them. Try the yela ring. Better chances.

Hahahaha. Thanks @Aluzard

That’s not good. I definitely think it’s server dependent. I haven’t had that issue yet though where they despawn. I have had them pop up later than usual tho.

No issues here either. Might want to try out in the halo

This method works 100% of the time for me. Keep trying.

Welcome @roadrunnerbp