Check out this customer install video of our product on a 2019 F150: kzfaq.info/get/bejne/r5-kbMKTnsDcaGw.html
@tonytevis10293 жыл бұрын
2018 STX install. This is probably one of the easiest and most satisfying mods I’ve done. Excellent quality product, engineering, and install. Thanks for a great experience.
@StarkeyProducts3 жыл бұрын
Thanks for the feedback Tony! We too are thrilled at just how easy this goes in compared to other electrical mods!
@btl42203 жыл бұрын
did you need the extra wire harness to tap into the passenger footwell or did juts the basic kit work ?? Thx
@malcolmwilliams34692 жыл бұрын
Fast shipping. Just installed on a 19' STX. Not pre-wired...but easy enough installation. They look great. Thanks
@StarkeyProducts2 жыл бұрын
Thanks for your feedback Malcolm!
@ericinlaverne4527 Жыл бұрын
Just installed a set on Wednesday. Super simple install (followed this video) and they came out great. Really happy with this light kit.
@StarkeyProducts Жыл бұрын
Thank you for the feedback Eric! We appreciate your business!
@jimfigler7416 Жыл бұрын
Nice product but you can buy the factory parts for less and get the button feature and the wiring is just as easy as it uses capped off connectors designed for the bed lights. Programming the changes yourself with Forscan is pretty simple. But your kit is very good for anyone intimidated by Forscan.
@matt13533 жыл бұрын
Very Bright LEDS that match the other LED swap outs on my 2021 Ford F150 XLT Sport. Looks identical to the stock unit sold under the 302A package. Installation took under 5 minutes, plug N play. Pleasantly surprised to find out that when pressing the cargo light button in the cab, these stay on as well, a BIG plus.
@StarkeyProducts3 жыл бұрын
Thank you very much for the feedback Matt! As it turns out the 2021 appears to be programmed in such a way that the lights can be activated with the cargo light. Previous years needed this programmed by the dealer.
@aarongriffin16453 жыл бұрын
This is exactly the answer I was looking for. Cargo light button in the cab turns the lights on, I am sold!!!
@aarongriffin16452 жыл бұрын
I just put these on my 2020 F-150 Lariat and I can confirm that the cargo button in the cab controls the lights in the bed and they stay on, HUGE benefit. Such an amazing add on. I am 100% happy with these lights. Thank you!!!!!
@StarkeyProducts2 жыл бұрын
Thanks for the feedback Aaron! Glad to hear you are enjoying them!
@musicovermyhammond99942 жыл бұрын
@@aarongriffin1645 did you not like your factory bed lights? With having a lariat that’s a standard feature.
@SillyPutty37004 ай бұрын
pushing wire through those pressure relief vents is a sure way to cause them to leak. they are just about the #1 place for cab leaks already.
@StarkeyProducts3 ай бұрын
I can't speak to the overall seal of the factory components, but we did test this extensively to make sure it wouldnt become a leak point with our cable running through. The vents open every time the cab doors are closed, so the risk of leak doesnt end up being any higher if a small cable runs through one of the flaps. That being said, there is a small grommet in the back of the cab below the vent that can be used if customers want to use another path. Its a bit tougher to get to and a little lower down than the vent.
@williamt93352 жыл бұрын
Just installed mine on my 2018 F150 STX. Installation was simple and the video really helped out.
@StarkeyProducts2 жыл бұрын
Thanks for the feedback and your business William! Take care!
@patrickcurran7221 Жыл бұрын
Did you need the extra adapter?
@ryanrinehart16863 жыл бұрын
Awesome product, I did it in under 15 minutes, so easy and just a perfect fit and function!
@StarkeyProducts3 жыл бұрын
Thanks for your feedback Ryan!
@dwightkeen5160 Жыл бұрын
I have a 2016 F150 with a bed cover er and this kit would help a lot!
@StarkeyProducts Жыл бұрын
This is probably the single most common reason our customers purchase this product - The bed covers are great but at night its impossible to see anything under them!
@txphoenix692 жыл бұрын
love to see you install tailgate light bar for 2021 f-150, even the step tailgate with the special bracket thats in the way please
@musicovermyhammond99942 жыл бұрын
Yeah, those look really good if they are hard wired. I’ve seen some on Amazon where they want you to plug into your trailer hook ups to me that’s not very appealing. I wouldn’t want to see wires hanging off my truck like that all the time.
@jorgelukkas2 жыл бұрын
Just put this on a 2017 F150 xl stx, looks great!! the only problem is on the instructions, says connect to the black and yellow and purple, that doesn't work for this truck, look for the gray with purple stripe, everything else is the same, great video thanks!!!
@StarkeyProducts2 жыл бұрын
Hi Jorge! Thanks for the feedback, glad you got the system working! So the Gray with Purple wire does work and will function the same way as the solid Purple, but we do not recommend using that with the bed lighting kit. Again it will work and is safe to use, but we prefer customers with a 2015-2017 use the Purple wire for power. I also want to clarify, this information is only applicable for trucks that did not come pre-wired and are using our 4572 power extension. Thanks again!
@stevenn43932 жыл бұрын
2019 F-150 XLT. No tailgate light with basic factory tow package; receiver & 4/7-pin outlets. Bummer, Lights didn’t work. I guess I’ll have to get the power cord as well.
@StarkeyProducts2 жыл бұрын
Sorry to hear Steven - while some trucks with a factory tow package are pre-wired, it is not a guarantee and we recommend everyone check before ordering. You can buy a power extension from us (SKU# 4572), but all it is is a 20ft power/ ground wire to supply power from the passenger side kick panel.
@flying_free3 жыл бұрын
Just installed them. I did have the light in the tailgate already so it was 10 mins and we were good to go. Looks nice in the dark too, very clean white light. How do you buy a replacement light assembly (no cabling)? Asking for a friend who hit the light a bit hard and snapped a tab off (still has a tight fit but...).
@StarkeyProducts3 жыл бұрын
Great to hear it was a simple install! If you email us, we will help you out. Thanks!
@mauromartinez92362 ай бұрын
Question for StarKey: Are 2019 F250's with Tow Package and Tailgate Camera's prewired the same as F150's? I want to avoid 3rd tail light wiring.
@StarkeyProducts2 ай бұрын
Hi Mauro - it depends on the truck/ configuration. The other issue is that Ford has had some issues with the that particular junction on the 2017-2019 Super Duty and for that reason, we didnt recommend connecting. That said if you wanted to give it a try, we do have a plug-n-play option and it would technically work on your 2019 if you are pre-wired and don't have the aformentioned issues. Please reach out to tech support if you need more information. Thank you! starkey-products.com/products/ford-super-duty-oem-style-bed-lighting-kit-2020-2022?_pos=1&_sid=7a7364973&_ss=r&variant=43127029530724
@ryanperry9838 Жыл бұрын
Do u have to disconnect battery for the extra power wiring extension
@WBDSNR3 жыл бұрын
Have you guys considered adding a switch to one of the lights that can be switched on and off from the bed? 25 seconds is OK, and cracking a door, eh, not a fan of that.
@StarkeyProducts3 жыл бұрын
Carlos - that's a great question. The issue is two-fold. First, the connector we are plugging into does not have a constant 12v power feed that we can safely utilize. If it did, the switch idea would work. However with that setup, you wouldn't be able to control with your key fob and they wouldn't come on automatically when you opened a door, without some additional wiring/ hardware (IE higher expense). We felt like the current configuration would give the most people the best function possible at a really reasonable price. That said, we completely understand some people would rather control it with a switch like it comes from the factory. Thanks for your insight!
@jrossnjax7 Жыл бұрын
Great review 👍 How would you know if I don't need extra wire install? I have xlt 4x4 with tow package already so does that mean I don't need extra wiring?
@StarkeyProducts Жыл бұрын
Thank you! Its hard to say - there is a 50/50 chance you are pre-wired. The only sure-fire way to know you are pre-wired is if you have the Pro Trailer Backup Assist feature which includes a small LED light next to your tailgate handle. If you have that, you are definitely pre-wired. If not, you'll need to follow the steps below to determine if you are pre-wired: To determine if your truck is pre-wired, check the C431 inline connector shown at time stamp 2:39. On at least one the plugs, the following wires should be present: 2015-2017 = Pin #6 (Black with Yellow Stripe) and Pin #7 (Purple) - Please note, there is a Brown wire with Purple stripe that looks similar. 2018-2020 = Pin #6 (Black with Yellow Stripe) and Pin #7 (White with Green Stripe) - Please note, there are TWO White with Green wires. You must have BOTH.
@richardyoung44002 жыл бұрын
Great stuff...have a 2021 xlt base model, could this be spliced together with a puddle light system also...
@StarkeyProducts2 жыл бұрын
Yes it can - we recommend ordering them together and we can include a special Splitter that replaces one of the Y-Adapters (since you only need one) and keeps it plug-n-play while reducing the amount of wiring below the tailgate.
@jakabmirgai33882 жыл бұрын
If i already have bed lights can i install these in addition to the factory bed lights? More toward the cab side of the bed?
@mikeleatherwood23267 ай бұрын
What about the on and off switch
@StarkeyProducts7 ай бұрын
We opted to design this kit without the factory on/off button. This was due to significantly higher costs and a requirement for the customer to visit the dealership for re-programming. These lights can be operated with the cargo light button located on the headlight switch. They also come on anytime the truck is unlocked or a door is opened. Thank you!
@gregimusprime74788 ай бұрын
are these plug and play on a 2020 if I already have factory bed lights installed?
@StarkeyProducts8 ай бұрын
Hi - the short answer is yes. The long answer is, modification may be required - most trucks that have factory bed lights have a black connector in place of the normal Khaki-colored connector. Please take a look at page 1 of the instruction manual - it includes information on how to modify the adapter to work properly. I am linking to it below in case you don't have it. Thank you! www.starkey-products.com/media/fseries/4580%20-%202015-2020%20Ford%20F150%20Bed%20Lighting%20Kit/4580-4780%20-%20Instructions.pdf
@user-ce5vr4cg3w7 ай бұрын
Do you have something like this for a 23 f150 stx that is pre wire?
@StarkeyProducts7 ай бұрын
Hi - currently our best option for the 2021+ is kit SKU# 4781 which you can watch an installation video for here: kzfaq.info/get/bejne/o7mZm8V5xrXOk3k.html
@manuelolivarez9697 Жыл бұрын
Where’s the final install link
@StarkeyProducts Жыл бұрын
Hello - it is found here: kzfaq.info/get/bejne/qLd_qKd-x7HPnmw.html
@user-ve2up9pw2y11 ай бұрын
How do you know if your truck is pre wired and you don’t have to buy extra wire to run up front?
@StarkeyProducts11 ай бұрын
Hi - You will need to check the C431 connector below your tailgate. This is shown in the video and also there is a picture and instructions found in our installation manual (link below). www.starkey-products.com/media/fseries/4580%20-%202015-2020%20Ford%20F150%20Bed%20Lighting%20Kit/4580-4780%20-%20Instructions.pdf On at least one the plugs, the following wires should be present: 2015-2017 = Pin #6 (Black with Yellow Stripe) and Pin #7 (Purple) - Please note, there is a Brown wire with Purple stripe that looks similar. 2018-2020 = Pin #6 (Black with Yellow Stripe) and Pin #7 (White with Green Stripe) - Please note, there are TWO White with Green wires. You must have BOTH. If they are not, you will also need Starkey 4572 Power Extension Wiring.
@Carriesaglock2 жыл бұрын
Ok so I got the external power harness wired up and the lights work (yay) but that green and white wire is really thin and fragile. Thought I was gonna sever it. How come since we’re in the fuse box we don’t tap a fuse with a fuse tap? This is how gear heads usually rig up things like line locs and stuff.
@StarkeyProducts2 жыл бұрын
That's an understandable concern. The wire-tap we supply is made for that specific gauge of wire (22ga), so if installed properly you will not have any problems. Although plug-n-play is always preferred, sometimes we have to tap a wire and these 3M taps are extremely reliable in dry areas, particularly for low amperage applications like this. As far as the fuse-tap question goes - they are great when you can use them, but are not usable in this case. Nowadays, the Smart Junction box manages multiple loads on the same fuse. The problem with using the fuse tap, in this case, is you bypass some of the built-in load management technology and if you blow the fuse you can end up rendering multiple functions inoperable until the fuse is replaced. At the same time, the fuses increasingly have power at all times which can be problematic if you are connecting a device that you only wanted to be powered when the truck is on.
@Carriesaglock2 жыл бұрын
@@StarkeyProducts ok was just a thought. Love the lights.
@tonypritchett1759 Жыл бұрын
So how can you tell if your truck is pre wired?
@StarkeyProducts Жыл бұрын
Hi Tony - All trucks have the connector, but some are not prewired. You'll need to check the connector and see what wire colors you have. Check the video description above for the wire colors (it varies by model year).
@twoguysandacamera49853 жыл бұрын
How do you verify if the truck is pre wired. I have a 2021 f150 stx
@StarkeyProducts3 жыл бұрын
If your truck has the Trailer Assist Lamp, it is pre-wired. If it has a factory-installed Tow Package (like the 2021 STX in this video), it is likely pre-wired. Check the C431 inline connector shown at time stamp 2:39. On at least one the plugs, the following wires should be present: 2015-2017 = Pin #6 (Black with Yellow Stripe) and Pin #7 (Purple) 2018-2020 = Pin #6 (Black with Yellow Stripe) and Pin #7 (White with Green Stripe) 2021+ = Pin #6 (Black with Yellow Stripe) and Pin #10 (White with Green Stripe) If they are not, you will also need Starkey 4572 Power Extension Wiring
@twoguysandacamera49853 жыл бұрын
Thank you I have the factory tow! I just ordered!
@StarkeyProducts3 жыл бұрын
@@twoguysandacamera4985 Thank you! Let us know how it works out!
@twoguysandacamera49853 жыл бұрын
Just installed!! Took 7-10min They look great!!
@StarkeyProducts3 жыл бұрын
@@twoguysandacamera4985 Awesome, thanks for the feedback! We joked during this video shoot that the video demonstration was going to be longer than the time it took to install, glad to hear that proved true! Enjoy!
@Schnicholas Жыл бұрын
Are there concerns for water / moisture getting into the cab routing the wires this way?
@StarkeyProducts Жыл бұрын
The vent is up high and is opening and closing to equalize pressure when doors close. No concerns or issues are expected or have been reported. This is a very common routing pathway for the F-Series truck line.
@nvabill2 жыл бұрын
I know you guys don't have anything for the later 21's as well as the 22's yet so I have a question. Why is the wiring so complicated on this project? Why can't 2 lights be installed in the bed and then powered directly by the light circuit for the light on the back of the cab? Wouldn't that be the simplest way? What am I missing?
@StarkeyProducts2 жыл бұрын
That's a great question - the revised version is not overly complicated, but there were some hold-ups in production due to how busy our shop is. We produce all the harnesses in-house. The new product should be available in the next week or so. Our apologies for the delay!
@nvabill2 жыл бұрын
@@StarkeyProducts thanks
@nvabill2 жыл бұрын
@@StarkeyProducts ok, follow up to my previous question with spoiler alert, your 4780 made for early 21's works perfectly on my '22 XLT. I went ahead and bought that one thinking I could modify your y adaptor because I knew power was going through the plug for the trailer hitch assist light in the tailgate. Well much to my surprise your y connector was wired perfectly for my truck. The bed lights now come on with the bed cab light switch next to the headlight switch as well as with the door open and with the key fob unlock button. This without your F series power connection extension wire. Thought you should know. Oh, and my truck was built in 12/21 and is XLT with 302 High package.
@Johnny1ders2 жыл бұрын
I have a 15 f150 and have to wire in the extension. I have 2 purple wires and do not want to splice into the wrong one. Not happy about this. I've already had tailight issues due to these crappy "splice" clips. So whish purple wire is it? How do I tell?
@StarkeyProducts2 жыл бұрын
Johnny - I apologize for the trouble you are having. 3M T-taps are definitely not suitable in outdoor locations like taillight wiring (prone to failure in the elements), but they do serve a purpose inside the vehicle and are extremely reliable in dry locations when installed properly. You can always make a permanent connection if that is something you prefer though. Be sure you are looking at wires running into the proper connector first - the video and instruction manual illustrate this visually. There is only one circuit with a solid purple wire on the C2280C connector we are working with - there is also a purple wire with a red tracer on it, but that is NOT the one we want. Please reach out if you are still having an issue. Thank you.
@Johnny1ders2 жыл бұрын
I will look again in the morning. But my fear is not weather proofing its snapping the wire in half. Hopefully I will have good news.
@tjkmj3 жыл бұрын
On my 2018 f150 STX I have a black/yellow wire, green/white wire on my C413 but my light wont turn on. I don't have a full tow package but I have a trailer package with a bargmsn 7 plug
@StarkeyProducts3 жыл бұрын
You’ll need to have TWO White/Green wires on the 2018+ trucks in order for the product to work. If you only have one, your truck is not pre-wired and you’ll need the 4572 power extension wiring.
@DavidCConnorАй бұрын
@tjkmj, I believe I have the exact same truck and mine doesn't work either. I'm checking the wires now. Were you able to get it working with the 2 extra red wires???
@davidyounger8872 жыл бұрын
In your comments regarding trucks built after July 2021, will this system work at all?
@StarkeyProducts2 жыл бұрын
No, it will not function properly. Please stay tuned as we are working on a revised version for the new late-model 2021's and beyond!
@VuNguyen-fl5rk2 жыл бұрын
I have a 2021 f-150. Will the led kit light fit the drop in bed liner?
@StarkeyProducts2 жыл бұрын
Hi Vu - Please send us an email at sales@starkey-products.com and we will send a list of what is needed.
@smithplumbing23663 жыл бұрын
Do you have a video that shows how to install the OEM drop-in bed liner? I have the F-150 XLT 2021 with the tow package.
@StarkeyProducts3 жыл бұрын
Hi - I am afraid we do not have a video for that.
@kenrosa92532 жыл бұрын
You can find that video on KZfaq
@randalfarnsworth1781 Жыл бұрын
Anyone make a similar kit for the 12 volt plug?
@davidperez43582 жыл бұрын
Will these lights come on when you open the tailgate?
@StarkeyProducts2 жыл бұрын
David - Great question, no they will not. Only when a cab door is opened (or when doors are unlocked with the key fob).
@Cotton6032 жыл бұрын
How do we know if trucks pre wired
@StarkeyProducts2 жыл бұрын
Hi Bill - If you have the Pro-Trailer backup assist feature on your truck, you are guaranteed to be prewired. Otherwise, you'll need to check for a couple wires under your tailgate and confirm you have them. These are listed in the description above. There is also the same information along with a picture to illustrate where to look in our instruction manual. www.starkey-products.com/Ford-F150-OEM-Style-Bed-Lighting-Kit-2015-2016-2017-2018-2019-2020
@mikebeverly882 жыл бұрын
how difficult would it be to tie this into the truck's prewired bed light above the back glass? that way you could use the switch in the truck to toggle the lights.
@hevymetal302 жыл бұрын
There was a video from starkey somewhere that showed how to tap into third brake light…and i cant find it
@mikebeverly882 жыл бұрын
@@hevymetal30 thanks I'm still doing more research
@hevymetal302 жыл бұрын
@@mikebeverly88 found it, its called 2021 and 2022 video
@bradfilla96662 жыл бұрын
Where can I purchase the lights and plug adapter?
@StarkeyProducts2 жыл бұрын
The Y-Adapter can be found here: www.starkey-products.com/Ford-F150-C431-Inline-Y-Adapter-For-Exterior-Illumination-2015-2016-2017-2018-2019-2020/ The bed light extensions can be found here: www.starkey-products.com/Ford-F-Series-Power-Extension-for-Bed-Lights-JL3Z-13A756-A/ The LED Lamps can be found here: www.starkey-products.com/Ford-F-Series-Bed-Lights-JL3Z-13A756-A/
@waynegeorge57122 жыл бұрын
Do you offer a bed switch for the led lighting
@StarkeyProducts2 жыл бұрын
Hi Wayne - No we do not. Our system is controllable with the factory KeyFob, and in some cases the cargo light button on the headlight switch. Ford offers a system with a button like the factory for 2015-2020 models - the only downside is that it is more difficult to install, more expensive (about $250) and requires a trip to the dealer for BCM reprogramming.
@cassandrahansell11352 жыл бұрын
Hi guys i have a 2019 stx and which wire do i tap into for the extenion i tried a white and green but no luck
@StarkeyProducts2 жыл бұрын
Hi Cassandra - The White wire with Green stripe is the correct wire for the 2018-2020 trucks that need the extension wiring. I would check all the kit connections and then check to make sure you are connecting to the proper White/ Green Stripe wire. Be sure you are on the correct connector. Here is a copy of the instruction manual incase you need it. www.starkey-products.com/media/fseries/4580%20-%202015-2020%20Ford%20F150%20Bed%20Lighting%20Kit/4580-4780%20-%20Instructions.pdf
@joshuabollinger65532 жыл бұрын
How do I know if it's pre wired? If i have that 12 point then it's pre wired and I don't need to run the extra wires?
@StarkeyProducts2 жыл бұрын
All trucks have the connector, but some are not prewired. You'll need to check the connector and see what wire colors you have. Check the video description above for the wire colors (it varies by model year).
@joshuabollinger65532 жыл бұрын
Ahhh! Thanks! I didn't see the description with the wire colors
@barsafan21252 жыл бұрын
Will this product work for a f350 2015?
@StarkeyProducts2 жыл бұрын
Hi Adrian - Unfortunately it will not.
@JulioGonzalez-662 жыл бұрын
I just purchased a 2022 F-150 XL regular cab. Do you have the the light install kit for this truck?
@StarkeyProducts2 жыл бұрын
Hi Julio -- we are working on it but nothing yet, please check back soon!
@SPerrault292 жыл бұрын
How far out for you from making a 2022 kit? I’m sure you’ll sell a lot as Ford made them an itemized option for 2022 rather than part of the package like the 2021’s.
@StarkeyProducts2 жыл бұрын
@@SPerrault29 No ETA but we are working on it! Yes we have heard from many Lariat owners that are upset they can't get the bed lights - particularly the ones that had a 21' on order and got bumped to a 22.
@SPerrault292 жыл бұрын
@@StarkeyProducts exactly what happened to me and I was told sorry nothing we can do! I’ll definitely be interested in your kit when it’s ready!
@chrisnitehawk98522 жыл бұрын
What's the wiring harness kit only part# no led lights please?
@StarkeyProducts2 жыл бұрын
For the 2015-2020: The Y- Adapter is SKU# 4571 The 20ft Power Extension is SKU# 4572 The Bed Light Power Extensions (1 per side, 2 needed) is SKU# 4581
@chrisnitehawk98522 жыл бұрын
@@StarkeyProducts HEY BROTHER HOPEFULLY EVERYTHING IS WELL AND YOU AND UR FAMILY IS SAFE! THANK YOU . HAVE A GREAT YEAR
@chrisnitehawk98522 жыл бұрын
@@StarkeyProducts what site can I find the part on?
@joshotto66073 жыл бұрын
Will the lights turn on when tail gate is opened.
@StarkeyProducts3 жыл бұрын
Josh - the lights will not be triggered ON by opening the tailgate itself. However anytime you press the unlock button on the FOB OR open a door, they will come on. If you have a truck with power locks (and the power locking tailgate), I’ve found it’s pretty natural to unlock and approach the tailgate and the lights are ON and ready.
@joshotto66073 жыл бұрын
Thanks
@josemolfino36372 жыл бұрын
@@StarkeyProducts I did the install, the lights go on when the door opens but they won't work with the keyfob. I have power locks (2021 STX)
@StarkeyProducts2 жыл бұрын
@@josemolfino3637 Send us an email at tech@starkey-products.com with your trucks' VIN# and any other details you can think of and we will help troubleshoot the issue!
@kwb4022 жыл бұрын
@@StarkeyProducts Same. Also, when driving with headlights they never turn off.
@slixk502 жыл бұрын
What does the wire we tap into operate ?
@StarkeyProducts2 жыл бұрын
It powers an exterior illumination circuit - Ford refers to it as 'Kerb Illumination'.
@19BADGER-F2502 жыл бұрын
Will this work for a 2019 f250?
@StarkeyProducts2 жыл бұрын
Hello - Unfortunately it will not. Please stay tuned as we will have a 2017-2019 Superduty version available soon.
@JoseRodriguez-tp2qs2 жыл бұрын
If the lights don't turn on, do I need an obd scanner to enable?
@StarkeyProducts2 жыл бұрын
Hi Jose - No, if they do not turn on and you have a 2015-2020 model year, chances are you need the Power extension wiring. I will link it below and the video does show that part of the installation as well. kzfaq.info?event=video_description&redir_token=QUFFLUhqa1daS0ZaTUtDenJyaG5IbF9JUHF5RkJIZ3ZUQXxBQ3Jtc0tsYXpucFdOeU02NUY4MnNXakdZS3FuOE9JdVdueVEwSWF3OHl3WXhRNjFKUnZWeU5ZdGdZS3Z5VWdYYThwWVljdEJPcm03WUMydHVSZzViREVNZ3hGQXRaeHhFQjlKYU5OeHp0U3pYakJ2a1JfYi1ucw&q=https%3A%2F%2Fwww.starkey-products.com%2FFord-F-Series-Power-Extension-Wiring-Exterior-Puddle-Lamps
@JoseRodriguez-tp2qs2 жыл бұрын
@@StarkeyProducts thank you. For the extension, do I have to turn off the battery?
@StarkeyProducts2 жыл бұрын
@@JoseRodriguez-tp2qs Although not required, it is never a bad idea to disconnect the negative battery cable. Thank you!
@JoseRodriguez-tp2qs2 жыл бұрын
@@StarkeyProducts I got the extension and almost done installing. Ran into an issue though. I don't see a white wire with greens tripe and I have a 2020. If ita not there, what other wire could be used?
@StarkeyProducts2 жыл бұрын
@@JoseRodriguez-tp2qs That is the only wire you want to use for this particular application. It is definitely there, assuming you are looking at the wiring from the correct connector. Every truck has them regardless of options. That said you may need to gently unwind some of the tape around the wire bundle to expose more of the wires - another thing that can happen is wire colors can bleed onto each other a bit making a white wire with green stripe look more like a gray wire with a green stripe, etc.
@marcusthieling54252 жыл бұрын
will this work with ford F-350 2019?
@StarkeyProducts2 жыл бұрын
Unfortunately, it will not Marcus, sorry! We are working on it, please check back soon.
@garyjohnson43563 жыл бұрын
Will this light kit work on a 2017 Ford F250 Super duty?
@StarkeyProducts3 жыл бұрын
Hi Gary - Unfortunately it will not. We are hoping to have a solution in the near future for Superduty owners.
@eddiecovarrubias37432 жыл бұрын
How's it going. Any update on this kit for Super duty ? Thx
@StarkeyProducts2 жыл бұрын
@@eddiecovarrubias3743 Nothing yet. Please check back anytime!
@jpjr67572 жыл бұрын
Standing by as well for ‘17 f250
@G19amc2 жыл бұрын
Would this work for a super duty? I have a F350 ? I am pretty sure I am pre wired.
@StarkeyProducts2 жыл бұрын
I'm afraid not, the configuration is different unfortunately. Stay tuned, we are working on it!
@G19amc2 жыл бұрын
@@StarkeyProducts standing by
@2008SUPERDUTYF3502 жыл бұрын
The lights should fit the superduty though correct? It's just the wiring thats different?
@StarkeyProducts2 жыл бұрын
@@2008SUPERDUTYF350 Yes that is correct, the lights will fit the openings in the bed since those are universal across all F-Series. The difference would be the wiring itself. Thanks!
@2008SUPERDUTYF3502 жыл бұрын
@@StarkeyProducts id be interested in installing them up to my upfitter switch
@btl42202 жыл бұрын
anyone installed these on a 2020 Lariat ??? For some reason the Y adapter plugs aren’t fitting my OEM wiring OR I’m doing something wrong (which is definitely possible) ANY help appreciated !!
@StarkeyProducts2 жыл бұрын
You are not crazy - Some 2020 Lariats have a black connector in place of the normal Khaki-colored connector. Please take a look at page 1 of the instruction manual - it includes information on how to modify the system to work properly. I am linking to it below in case you don't have it. www.starkey-products.com/media/fseries/4580%20-%202015-2020%20Ford%20F150%20Bed%20Lighting%20Kit/4580-4780%20-%20Instructions.pdf
@btl42202 жыл бұрын
@@StarkeyProducts Ok I’ll check it out Is there an email I can send a question to ?
@btl42202 жыл бұрын
@@StarkeyProducts I just read that and that’s exactly what I’ve got , the black connectors with the tabs aligned differently, I was debating trimming those now this confirms that THX
@StarkeyProducts2 жыл бұрын
@@btl4220 Absolutely! Tech support is at tech@starkey-products.com
@btl42202 жыл бұрын
@@StarkeyProducts Ok 👍
@bluemonty3638 ай бұрын
sell this kit with the switch add on option for those owners with FORScan and i will be the first to buy for my 2023.