☑️Buy this product - www.amazon.com...
☑️Features
- Protects original paintwork against dings and light scratches.
- Self-healing technology built into the film guarantees scratch resistance.
- The film’s multiple layers work together to heal any surface-level damage and scratches.
- Great for trunks, doorsteps, and/or similar high-traffic areas
- This film can also be used on various surfaces on bikes, boats, helicopters, etc.
- Easy to install and remove without any residue.
☑️Preparation
Prepare the surface by cleaning the application area thoroughly with isopropyl alcohol to ensure the cleanest surface possible. Be sure to remove all contaminants. Round the corners to avoid peeling when cleaning in the future.
☑️Installation
1. Cut the film to your desired length.
2. Peel the release liner (bottom side) from the film.
3. Spray the film underside and the application area to be able to adjust the film.
4. Align the film in place, making sure that the film is as tight as possible against the application area.
5. Apply the film by pressing it firmly down onto the surface and squeezing out the bubbles and water with the squeegee or card.
6. Working from the center outwards, squeeze out any remaining bubbles and water with a microfiber towel.
7. Allow it to cure for a recommended time of 24 hours.