Step by Step - How to Install a Soundstream V2 in a 2014-2023 Harley Davidson® Road Glide

Рет қаралды 3,306

Ай бұрын

In today's video, we walk you through the step by step process of how to install a Soundstream V2 radio in your 2014-2023 Harley Davidson® Road Glide.
Order Your Soundstream V2 Radio here:
volunteeraudio.com/product/so...
🔥8.3″ Screen - First in the industry made for Harley Davidson®
🔥1000 NIT Screen - Brighter & more vibrant screen in direct sunlight
🔥QLCD (with Quantum Film) - Very Colorful Display
🔥Certified Wireless Apple CarPlay & Android Auto
🔥On Board iGo Primo GPS Navigation with use of factory GPS antenna or the one included
🔥Built-In Wireless Headset Interface - No Factory WHIM Required (Any OEM or Aftermarket Bluetooth Headset can Connect)
🔥Headset experience for both the Rider and Passenger - Rider can have Nav, Music, Phone calls, or all three. Passenger can be Nav, Music, or both. (No Phone call for Passenger)
🔥Factory Cursor! Navigate all the menus just like the factory radio through the thumb control
🔥Rally Mode™ - Stream Music with 300 of your best friends up to 330 feet away! You read that right…. 300 at 330 feet! (capability of naming your bike for this service)
🔥15 band EQ with 3D Sound Mode
🔥8 layer PCB - Cleaner sound and more room for other electronics
🔥Compatible w/ iDataLink® Maestro® RR CANBUS Integration Module, Displays Up To 10 Digital Gauges, Choose From 50+ Available, Pop-Up Warnings For Oil Pressure, Fuel Level, Engine Temp, & More
🔥Customizable Programming Of Handlebar Thumb Controls, Activates Boom 1, Boom 2, & HD Audio OEM Amplifiers, Wire Harness Ready For iDataLink® Maestro® RR® & RR2®
🔥 Upgrade Head Unit For Touring Motorcycles, Exact Fit In OEM Location Uses OEM Mounting Hardware, No Brackets Or Trim Rings Required
🔥Uses OEM USB® & Integrated Radio Antenna, No Adapters Required, IPx5 Water-Resistant Faceplate, Safe for All Weather & Washing
🔥SiriusXM Ready® (SXV300 vehicle connect tuner required)
🔥Handlebar Cursor To Scroll & Select Playback Controls, Settings, etc.
🔥Bluetooth® Wireless Connectivity for Audio Playback & Control
Video Camera RCA Input w/ 12v Trigger & On-Screen Shortcut
🔥15-band Digital Equalizer w/ Preset & Custom Settings Built-in
🔥400 watt peak 4-Channel Amplifier Built-in, Class D & 2-Ohm Stable
🔥5-Volt RCA Audio Outputs for Front, Rear, & Subwoofer Amplifiers
🔥High Pass Crossover Separate for Front & Rear Speaker/RCA Outputs
🔥Low Pass & Subsonic Crossover for Subwoofer RCA Output
🔥2 USB inputs, 1 USB C and 1 USB A
If you're wanting a larger upgrade, we build the best fully plug n play Amp / Speaker Upgrade packages using the best brands for your Harley Davidson! You may be surprised how affordable it is to get Volunteer Audio to do an amazing Speaker / Amp upgrade to your Harley Davidson. All plug n play so no wiring is cut and all factory warranties are maintained! Give our sales team a call at 1-844-30AUDIO to go over pricing, options, and to book your installation appointment! Want to save money and install yourself? Call us to get a diy plug n play package, then watch our simple step by step install videos at www.VolunteerAudio.com! We offer no interest financing for up to 24 months through affirm or PayPal credit! Get your system now and pay later!
More on Affirm here:
www.affirm.com/how-it-works
#VolunteerAudio #HarleyDavidson #roadglide #streetglide #soundstream #motorcycleaudio #cvoroadglide #cvostreetglide #soundstreamreserve

Пікірлер: 67

@williamwhitlow5704 13 күн бұрын

Thanks, love your videos...

@volunteeraudio 13 күн бұрын

Thank you for watching!

@stewartsmall5695 Ай бұрын

Great job Jay

@volunteeraudio Ай бұрын

Thank you!

@user-ob4nd6or1p Ай бұрын

Thank you!!

@martymorgan3085 Ай бұрын

I would definitely use some velcro tape and tape the module to the steel bracket. Two 3" strips on each side should do. Otherwise you will hear it vibrating against that steel at idle on the big V-twin.

@volunteeraudio Ай бұрын

You can do that or use some zip ties

@gasmann6746 Ай бұрын

Hey Jay, can you install the wired microphone and still use the wireless microphone through your Cardo unit asking as it would be handy to use Siri capabilities when you don’t have your helmet on another great install video thank you. 👍🏻🇦🇺

@volunteeraudio Ай бұрын

Yes you can

@volunteeraudio Ай бұрын

Thank you

@cyberdojo798 Ай бұрын

Does anyone happen to know the sound to noise ratio measure in dB?

@cag13x Ай бұрын

Can you cover the kenwood camera system install with the v2?

@volunteeraudio Ай бұрын

The Kenwood camera system does not connect to any radio

@user-ob4nd6or1p Ай бұрын

Outstanding video! Thanks so much. Can’t wait for my V2 to arrive! Hopefully very soon!

@volunteeraudio Ай бұрын

Thank you!

@AxemenTreasurer Ай бұрын

Can you show how to change the wallpaper? Also is it possible to change the start up screen?

@volunteeraudio Ай бұрын

I’ll Make a video

@trtrask Ай бұрын

Just got my head unit, huge difference in sound quality compared to the stock Harley junk. When it comes to the remote wire for the amp that was wired in initially with the stock radio, do I leave it where it is plugged in, or do I need to move it over to the plug that is on the MRR2 harness? Everything is working but just wanna make sure

@volunteeraudio Ай бұрын

Move it to the radio harness connector

@daleabcdefg12345 27 күн бұрын

If I already had an amp installed and I am adding the radio with the MRR2, what would be the connection sequence for the large connector on the back? Would the MRR2 plug into the radio or would it plug into the harness from the amp? thanks!

@volunteeraudio 26 күн бұрын

The radio / mrr2 harness plugs directly into the radio, amp goes between stock radio harness and new radio harness

@sageraven6246 Ай бұрын

I have a 2021 CVO Road Glide with the factory amp in the saddle bag. Question: Is the amp wired up through RCA or the main wire harness? Im looking at buying this V2 from you.

@volunteeraudio Ай бұрын

Factory amp is wired through the stock speaker wiring and is plug n play to this radio

@00powerstrokin Ай бұрын

Is there a trick to getting the speed to register on the home page? Mine reads 0 but on the gauge page it shows my speed. My rally mode only works if I’m the dj. I can broadcast but not receive.

@volunteeraudio Ай бұрын

Update coming to fix Home Screen speed, call tech support about the rally mode issue

@zulu3235 7 күн бұрын

Do all thumb controlls work with this radio? On the new Diamond Audio mshd14 the right don't work

@volunteeraudio 7 күн бұрын

Yes they all work in the Soundstream v2

@spfx99 Ай бұрын

What did you say about the guages not working with Thundermax tuners? Is it only if you have autotune or is it with all Thundermax tuners?

@volunteeraudio Ай бұрын

Thundermax ecm’s do not send gauge data out for the radio to read, all other radio functions work, including the advanced thumb controls and the motorcycle info screen

@ChuckMoore-ld5zu Ай бұрын

Can an aftermarket Bluetooth TMPS be paired to the V2? Thanks

@volunteeraudio Ай бұрын

No but I’m told there are some that pair to a phone app that can be viewed in apple carplay

@lescarr4463 Ай бұрын

Is this unit louder than the OE radio? can I get by without installing the amp and speakers? 2023 road glide limited

@volunteeraudio Ай бұрын

About a 3rd more power than the stock radio, still not as powerful as the aftermarket amps we normally use

@Remy1100 Ай бұрын

Have you guys started on the March orders?

@jam471975 Ай бұрын

I ordered in March and still haven't received a shipping confirmation. Have you?

@volunteeraudio Ай бұрын

All pretty orders will be shipped by end of next week, we are working on march now

@johnrolfe6995 15 күн бұрын

Jay, I just installed my radio with the help of your video, thank you! But, is there a way to get rid of the gap at the bottom between the radio and faring face? Did I do something wrong when installing it?

@volunteeraudio 14 күн бұрын

That is there with the factory radio, the fairing gets out of adjustment overtime and never fit perfect even when new. This is why Harley put a foam strip there

@johnrolfe6995 14 күн бұрын

Ok, factory radio fits perfect, no gap and no foam.

@volunteeraudio 14 күн бұрын

@@johnrolfe6995 reinstall it, I assure you the chassis and radio face are the same dimensions

@volunteeraudio 14 күн бұрын

@@johnrolfe6995 the foam is on the backside of the inner fairing top and bottom because it does not fit tight from factory

@johnrolfe6995 14 күн бұрын

Definitely no foam. Checked several times. It’s flush on top but that little gap on the bottom. When I put the stick radio in, it’s a perfect fit. Should I worry about this gap? It’s really not that noticeable.

@nickeminoski2205 Ай бұрын

Did they fix all the glitches the si has?

@volunteeraudio Ай бұрын

No idea what glitches you speak of, I have no issues with the si

@harlenmineiro 23 күн бұрын

Is it possible to ship to Brazil?

@volunteeraudio 13 күн бұрын

Yes we do

@stuartberke5845 Ай бұрын

Hi Jay. What is the cost for this one?

@volunteeraudio Ай бұрын

volunteeraudio.com/product/soundstream-v2-plug-play-headunit-for-2014-2023-harley-davidson-touring-motorcycles

@pokerfacemonks Ай бұрын

Is the V2 worth it? I was thinking of getting it. I have the boom in my ‘23 RGS..

@volunteeraudio Ай бұрын

It has an amazing sound, well worth the cost in sound alone but then it adds so many awesome features too

@pokerfacemonks Ай бұрын

@@volunteeraudio Great! That will be my next purchase. :) Thanks.

@petejones961 Ай бұрын

Nice head unit, but at $3000 aud its a bit out of my reach

@volunteeraudio Ай бұрын

Where did you get $3000, not even close

@petejones961 Ай бұрын

@@volunteeraudio That's Australian dollar

@lorinlewis23 Ай бұрын

Why can’t you use the factory GPS antenna?

@volunteeraudio Ай бұрын

Sometimes you can but the included antenna has worked better in my testing

@bosybert2999 Ай бұрын

Ordered mine last week! Because the V2 has a selectable crossover should I select "FLAT" on my Diamond V2 or leave the hi-pass crossover on? Tired of having to adjust my amp on my Roadglide..Sick of the GTS.

@volunteeraudio Ай бұрын

I set crossovers at amp level when available

@gasmann6746 Ай бұрын

@volunteeraudio Ай бұрын

Yes you can

@bradiacm7828 Ай бұрын

I like the idea that you can walk up to the bike, turn it on, and use the wired microphone without putting your helmet on. It looks really slick when showing off your new system to your buddies.

@ChuckMoore-ld5zu Ай бұрын

Can an aftermarket Bluetooth TMPS be paired to the V2? Thanks

@volunteeraudio Ай бұрын

No, it only sees factory style tpms sensors once registered to the bikes ecm

@munciebill8674 Ай бұрын

There is an aftermarket TPMS that has an apple carplay capable app. Can monitor tire pressure thru careplay.