Step by Step Tutorial DIY | Replace Range Hood Switch Assembly

Step by Step Tutorial DIY | Replace Range Hood Switch Assembly | Rem's Channel

Рет қаралды 16,608

3 жыл бұрын

Replace a range hood switch assembly also known as a controller. In this video, you will learn how to replace the switch assembly on a kitchen range hood. This video demonstrates the procedure to replace a switch assembly on a Zephyr range hood. Not all range hoods are identical, but the procedure is similar on most range hoods.
Please like, share and subscribe and hit the notification bell for more videos.
Thank you.

Пікірлер: 10

@AncientAviator 2 жыл бұрын

Thank you SO MUCH for posting this sir!

@ladymjaneculverjhonaticste9264 2 жыл бұрын

Thank you for sharing this. LYN O.

@chachacha06 Жыл бұрын

Mine is Viking, but it's very similar system. Thank you for uploading this!

@madhavigullapalli7416 2 жыл бұрын

Thanks you! This was so helpful in replace my zephyr hood switches

@RemsChannel12345 2 жыл бұрын

Glad it helped!

@gelezernadimaano5544 3 жыл бұрын

Great job po regards Godbless us always❤️❤️❤️❤️👏👏👏

@rosalinareano8580 3 жыл бұрын

Wow good job

@bgable7707 Жыл бұрын

AWG wire size question: are the wires from the controller switch to the motor 18 or 16 awg? The ones that you disconnected from the tangs. I have the need to mount the fan higher than normal. I was looking at this model because it appeared the controller can be dismounted from the unit as you have shown. I'm looking to fabricate a mount of the wall or counter top to hold the controller and run wires up to the fan housing.

@ricklee7265 2 жыл бұрын

I have a AK7600 zephyr tempest from 2007. The fan does not work.. no screws to unscrew. I was told by zephyr part no longer available to repair! Do you agree?

@RemsChannel12345 2 жыл бұрын

I can't find any information on a model AK7600. Are you sure that is the right model number? If it is the right model number, then the information given to you, i.e., the part is no longer available, may be correct. Therefore, they might not support that model anymore and do not stock repair parts for it. You might be able to find a fan motor that could replace the old one at an electrical supply store.