Stereo UPGRADE, Toyota Corolla - Radio Removal & Installation 2014, 2015, 2016, 2017

Рет қаралды 22,108

Күн бұрын

Upgrading to an aftermarket Pioneer Stereo (DMH1770NEX) stereo on a 2014 Toyota Corolla. Step by step, setting up the harness with a Crux SWRTY-61N, stock stereo removal, and installing the new stereo. The CRUX harness is compatible with most stereo, so other aftermarket stereos like JVC, Kenwood, Alpine, etc. can also be used.
Amazon Affiliate Links
➡️ Pioneer DMH1770NEX: amzn.to/3OIKUxp
➡️ CRUX SWRTY-61N: amzn.to/47C8YdR
➡️ Metra Bracket (ONLY 2014-2016 Corolla): amzn.to/3KOPsAS
➡️ Soldering Iron: amzn.to/3OHhi3o
➡️ Tesa Tape: amzn.to/3OKXFHw
➡️ 1/4" Washers: amzn.to/3qEYaLj
➡️ Zip Ties: amzn.to/44iHsiw
➡️ Wirefy Heatshrink Tubing: amzn.to/45hUQoo
➡️ Wire Strippers: amzn.to/45lH7wX
➡️ Self-Soldering Butt Connectors: amzn.to/3UQJe9s
As an Amazon Associate I earn from qualifying purchases. If you place an order, thank you for supporting my channel!
Timestamps 🕓
0:00 Introduction, Features, Parts & Tools
1:50 Pioneer Stereo Wiring
4:05 CRUX Harness Wiring
8:15 Connecting the Wires Step-by-Step
10:53 Getting the Pioneer Ready for Install
12:43 Removing the Old Stereo System
14:55 Installing the New Pioneer Stereo
18:51 Comparing Sound: Stock Stereo vs. New
⚠️ DISCLAIMER:
Use of the information in this video is solely at your own risk. The creator of this video assumes no liability for any property damage, injury or expenses incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
The creator of this video makes no claims, promises or guarantees about the accuracy, completeness, or applicability of the procedures and instructions contained in this video.
Any injury, damage, or loss that might occur as a result of improper application, improper use of tools or equipment, or from the information contained in this video, is solely the responsibility of the user.
#toyota #corolla #pioneer #stereo #stereoupgrade #radio #carradio

Пікірлер: 70

@CleverFix 9 ай бұрын

Also check out my *TWEETER Upgrade* : kzfaq.info/get/bejne/e61ooduFqOC6kWQ.html *REAR SPEAKER Upgrade* : kzfaq.info/get/bejne/pbJlrb15lZ-6pXU.html and *FRONT SPEAKER Upgrade* : kzfaq.info/get/bejne/j6yUhciGz6nJpWQ.html If you enjoyed the video, please give it a *thumbs up* 👍. Your support helps me create more content and is *greatly appreciated* . If you have any *questions* , *comments* , or *suggestions* for future videos, feel free to leave them below. I love hearing from you and look forward to your *feedback* !

@876r876rf 9 ай бұрын

This is a hail Mary but, could you possibly do an amp install in the 2014? I just got a kicker 4 channel amp and am a bit lost. Thank you for the videos!

@CleverFix 9 ай бұрын

@@876r876rf If this video gets enough views I would.. it will take some time though, so by then I'm sure you'll be done. It's not very difficult.. probably hardest part is getting the power wire from the battery to the back, and you can see my Compustar Alarm video for getting a wire from the engine side to inside the car. After that the wire can run on the driver side all the way to the back, just have to pull the trim at the bottom (next to the fuel door/trunk release).. along with the RCA outs and front speaker wires from the head unit. You can use new speaker wire and wire up the back speakers directly from the amp, and the front can hook into existing wiring from stereo... you'll need a color diagram for the factory stereo wiring to find the front speaker wires, probably available from the12volt.com . I also have a video for taking off the rear seats, you may have to do that, not sure. One thing I'm really not sure is where to get a good ground in the trunk... and I'm guessing you're installing in the trunk?? Cause some people put it under the driver's seat.. and in that case, there should be easily found ground points in the dash, and I show one in the Compustar Install Video.

@CleverFix 9 ай бұрын

@@876r876rf Here's my Compustar Video: kzfaq.info/get/bejne/qbhdoMervNTTkX0.html that shows routing a wire from under hood to inside, and ground point. Once you get the amp powered, it just needs the RCA outs from the stereo plugged into it, and the the speaker outs have to be connected to the speakers instead of the outs from the stereo.

@876r876rf 9 ай бұрын

Thank you, that helps a lot. I'm just confused how I'm going to get wires from the amp all the way back to the front speakers. I have an idea of what to do in general but there are some clear gaps in info so i cant really move forward. I have a 2014 corolla, and i noticed on the drivers side north west of the gas pedal is an ovular cut by toyota in the insulation and you can just pull it right out. I believe that's where it's going to go through.@@CleverFix

@brendanyoung 4 ай бұрын

I’m amazed at how easy the stock removal is. When I upgraded the stereo in my 2006 Corolla, years ago, you had to take out the center console and disassemble a good portion of the dash.

@CleverFix 4 ай бұрын

Yes it's a lot better now! I'm happy with the way it's designed, easy to replace.

@emacrz2561 3 ай бұрын

They make it easy because they know how crappy those oem radios are 😂

@SweetHaley 9 ай бұрын

Great video! Very well explained and show how to install. The sound comparison is noticeable different from the original to the upgrade one, the new one sounds a lot better. Keep it up with these great videos!

@armandoramos1949 5 ай бұрын

Thank you for sharing this video. More power to you and your channel. I drive a 2015 Corolla S with tech package.

@CleverFix 4 ай бұрын

Nice, that's very similar to my 2014! Thanks for watching, it's appreciated.

@DavidRodriguez-fz4eu Ай бұрын

Thank you for your videos. Help me so much.🎉

@CleverFix 8 күн бұрын

Happy to help! Thanks for watching and for the feedback.

@sergionieves997 9 ай бұрын

Excelent video

@thetruth5672 6 ай бұрын

Wowwww amazing

@philipcheung8910 9 ай бұрын

Can you also comment on the Android auto functionality? Is it wireless and stable connection?

@CleverFix 9 ай бұрын

I haven't tested it thoroughly, I'm gonna try it more and get back to you. It connects VIA Bluetooth and USB Cable at the same time. According to the manual it seems to require both. I'm not sure why though, but I'll give it a try without the Bluetooth and see what happens.

@adamthewoodworker2571 7 ай бұрын

Hey. In your opinion, is this a "more necessary"/higher priority upgrade than adding an amp for new speakers?

@CleverFix 7 ай бұрын

Amps usually take a Line In, which means an unamplified sound source. The stock stereo doesn't have Line Out,.. so adding an amp doesn't really work. Some amps can work off of already amplified output but they won't have good quality and the quality of the stock stereo is not so great, so even if you manage to put in amp, it will be amplifying a low quality sound source. The stereo upgrade is quite costly, but it would be the first thing to do after upgrading the speakers, if better quality is needed, line outs, and of course the mobile connectivity upgrade.

@dannylee2266 9 ай бұрын

does CRUX SWRTY-61N compatible with JOYING carplay stereo 11:6 with 20pin connect on back of stereo.

@CleverFix 8 ай бұрын

No it's not. See the manual: cruxinterfacing.com/wp-content/uploads/2017/08/SWRTY-61N_MANUAL-3-8-21.pdf On page 2 is a list of the brand supported.

@sordid-humor-podcast 9 ай бұрын

Hows the back up cam look? better screen?

@CleverFix 9 ай бұрын

Yes, much better image, especially at night!

@rustyboltz2820 2 ай бұрын

How do you find the sound compared to the old Toyota entune unit? ? Also I heard the usb adapter in the CRUX-SWRTY kit was faulty for a few people did it work well for you?

@CleverFix 2 ай бұрын

The USB is working perfectly on mine still, so I think it's a rare thing, but yes I've seen some reviews about that. The sound is WAY better.. More rich and more frequencies. It makes driving more fun for sure. I played around with the equalizer for a while until I got it to the perfect settings for my ears, and I've had it there since. It took a few days of getting adjusted to it.. I was so used to the more "muted" stock stereo.. a lot more highs from this unit. The stock "high" "bass" and "treble" settings are a joke. It was definitely worth the money. I just checked and there's a "used acceptable" and "used - very good" right now on the Amazon link in the description, that are a fairly good price. I've had pretty good luck on the warehouse deals.

@rustyboltz2820 2 ай бұрын

@@CleverFix Ok thanks I appreciate the response, that's definitely what I was hoping since I'm about to install a Sony XAV-AX5500 (on sale locally where I am in Canada) + Kicker speakers all around, I can't stand the stock stereo. Last question, I am planning to do a subwoofer amp install in the future so unfortunately that remote turn on wire (blue/white) can only be used for the antenna in the 2014 Corolla since it can only be ran on one circuit? I want good reception but I also want to be able to install an amp in the future thus I was originally planning to maybe leave it unwrapped so I don't need to take off the tape when I install my amp wiring kit later on.

@x2msquared 4 ай бұрын

Does the back-up camera show on the new unit you've put in? I'm looking to replace mine since Toyota is quoting me $3000+ for a brand new radio unit or if I have it exchange it is going to cost me $1000+!

@CleverFix 4 ай бұрын

yes, the SWRTY adapter includes backup camera input, so the RCA connector from the car plugs into the SWRTY and it actually has a much better picture than the OEM head unit at night. That's ridiculous $3000.. If you really want another stock one, you can get it from a junk yard very cheap... The sound is way better with Pioneer though.

@x2msquared 4 ай бұрын

@@CleverFix I'm definitely leaning towards just updating the whole thing with a touchscreen unit like you did. More sleek and has more options. And way cheaper! I almost dropped to the floor when Toyota said $3000+ for a brand new one and another $100+ for them to install. Like no thank you!

@ChrisBanda 3 ай бұрын

@@CleverFix What about the other vehicle settings that you access through the OEM headunit, are those lost with this upgrade?

@CleverFix 3 ай бұрын

@@ChrisBandaYes the settings are lost unfortunately. I hardly ever changed them so it's ok for me, I'd rather have better sound. I kept the stock unit, so if I ever need to change them, I can put it in temporarily.

@ChrisBanda 3 ай бұрын

@@CleverFix I see, so you kept stock speakers? I get vibration from my rear speakers, I feel like I'll need to change them out when I do my upgrade. Sounds bad especially with bassy music.

@crisantogarcia6646 9 ай бұрын

Does the usb that came with the car still work and can it be used as a wired connection for apple car play?

@CleverFix 9 ай бұрын

Yes, the CRUX SWRTY-61N retains the USB function. The connector is at 6:04 in the video. That connector plugs into the car wiring and the back of the stereo. Yes it can be used as a wired connection for Carplay.

@CleverFix 9 ай бұрын

See page 32 from the DMH1770NEX for connecting CarPlay with USB, it's very simple: www.pioneerelectronics.com/StaticFiles/Manuals/Car/OPM_DMH1700NEXUC_EN_A.pdf

@crisantogarcia6646 9 ай бұрын

@@CleverFix great thank you.

@j.m.vonwood 4 ай бұрын

Did you do a video for the mic installation? I'm installing mine tomorrow!

@CleverFix 4 ай бұрын

Sorry I didn't get the time. It's super simple though, the A-pillar video is pretty much all that's needed. kzfaq.info/get/bejne/mKqqlpqU1bS9Z30.html I double side taped it on the windshield at the top.. Make sure to glue it somewhere where it doesn't obstruct your view if you're picky.. I don't like seeing the black blob in the way t all... It can be placed in such a way that it's not visible at all. The dash side cover just pops off and the wire goes through easily, then I used some zip ties.

@CleverFix 4 ай бұрын

Also make sure to tape the wire to the existing wires in the A-Pillar so it doesn't obstruct the airbag.

@CleverFix 4 ай бұрын

Thanks for the reminder also, I'll try to get it done soon.. it's useful for Mic or Dashcam as well.

@j.m.vonwood 4 ай бұрын

thanks for getting bak to me so quickly! will let you know how it all goes!

@j.m.vonwood 4 ай бұрын

@CleverFix Any idea what would cause a USB overcurrent caution?

@louismacvux 9 ай бұрын

Can you still change the vehicle settings with the new head unit?

@CleverFix 9 ай бұрын

No, the vehicle settings are only available on the factory stereo. I don't really need to change anything ever, I'm happy with the usual settings, but I kept the stock stereo just in case. If I ever need to change something, I can always re-install it temporarily. And if I ever want to sell the car for example, I can also pop it right back in, and keep my stereo for the next car.

@emacrz2561 3 ай бұрын

@@CleverFixso there's nothing aftermarket that can change the car settings? We're stuck with OEM fot that matter?

@CleverFix 3 ай бұрын

@@emacrz2561Yes, unfortunately only the OEM head unit can interface with the vehicle to change settings. For certain things, like Door lock settings, some Corollas are programmable through a specific sequence of presses of buttons on the door itself .. but for headlight settings and other things, only the head unit can do it. I also believe the dealer can change any settings, without the head unit installed, but they'd charge for it. The only thing I really miss is the fuel efficiency graph.. I can live with the same door/headlight settings.

@kleancut29 4 ай бұрын

Will the backup camera still work?

@CleverFix 4 ай бұрын

Yes, backup camera input is at 6:45 . It will look a lot better at night too, less grainy. Daytime is similar.

@cleafster 4 ай бұрын

Is the soldering 100% necessary?

@CleverFix 4 ай бұрын

No, some people use butt connectors, I added a link in the video description to self-soldering butt connectors. They require a heat gun to melt the solder inside them. Make sure to follow the instructions.

@lightanddarkful 15 күн бұрын

Hey I recently tried to install this And I get the message usb overcurrent What does that mean? What can I do to fix it? I have a 2014 toyota corolla And I used the same radio in description.

@CleverFix 15 күн бұрын

This was asked in another comment, so I'll just reply the same reply: "Possible short circuit somewhere.. Could be the USB cable is bad, or sometimes the error can show if the speakers are shorted, the terminals of the speakers shouldn't touch any of the car's body, if they do it can short them. I'd take the USB cable out, see if it still happens, and if it happens, then disconnect the speakers one by one.. the rear is easiest to start with." Hope that helps! The other poster never replied back, so I'm guessing it worked for him.

@lightanddarkful 13 күн бұрын

Okay

@stevenvarani1823 23 күн бұрын

I am unable to find any videos of the radio I have in my 2015 Corolla. My radio does not have knobs.

@CleverFix 23 күн бұрын

Sounds like somebody has already upgraded it.. did you buy the car new? Stock stereo has knobs.

@stevenvarani1823 15 күн бұрын

@@CleverFix It turns out my son upgraded the radio. Thanks for replying though.

@soorajrajankadakkal1509 9 ай бұрын

@MrsOneOfAKind16 8 күн бұрын

Do I need a data link?

@CleverFix 8 күн бұрын

Good question. For 2014-2016 it will work as shown in the video. I believe it will work on some later years as well, but I haven't tried. You can contact CRUX directly here: cruxinterfacing.com/product/swrty-61n-radio-replacement-w-swc-oe-rvc-retention-for-toyota-vehicles-2012-up/ and ask which products are compatible with your model. They say 2012-2019 Corolla, but Crutchfield does not display the SWRTY on 2017+. See: www.crutchfield.ca/p_130DM1770/Pioneer-DMH-1770NEX.html and select your car, for compatible parts. It's odd that Crux lists more years than Crutchfield does. Thanks for watching!