Advanblack DIY Install One Touch Hardware 14+ Harley Touring Motorcycle

Рет қаралды 56,275

5 жыл бұрын

ATTENTION THIS IS THE STOCK LATCH AND LOCK SYSTEM FOR 14+ HD TOURING.
Follow me as I install Advanblacks One Touch Hardware for 14+ lids and install these on the bags. Step by step instructions you can do at home.
Purchase here: bit.ly/2LFweOH
Fits 14' - 19' OEM and Advanblack Saddlebag lids.
One Touch Saddlebag Mounting Hardware
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Gear
Camera- Sony 4K AX53 - www.amazon.com/Sony-FDRAX53-V...
Wireless Mic - Samson Go Mic Mobile - Samson-Mobile-Professional-Lavalier-Wireless/dp/B0749WP3M3
Wired Mic - Maono - www.amazon.com/gp/product/B01...
Shotgun Mic - Comica - www.amazon.com/gp/product/B06...
Video Tripod - Coman www.amazon.com/COMAN-KX3636-P...
Video Tripod - Pantan BV30 www.amazon.com/Cayer-BV30-Cam...
Zomei Z818c- www.amazon.com/gp/product/B01...
Zomei Z818 - www.amazon.com/gp/product/B01...
Video Lights - IVISII LED Video Lighting www.amazon.com/gp/product/B07...
#sikbaggers #advanblack
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.

Пікірлер: 95

@dennywinchel2348 3 жыл бұрын

Great video! Had some custom paint work done & they took everything on the bags apart & left for me to figure out. But you helped make it easy!!! THANKS!!!

@dodgethis12 5 жыл бұрын

Looking forward to getting my order soon, will be re watching some of you lid swapping videos, before touching my new bags, great video, as usual.

@mattfreni7714 3 жыл бұрын

Excellent instructions. Great video!

@petelanzone484 5 жыл бұрын

Quick story to share. I had to perform this on my 14 Street Glide Special. I had to replace both that hard bag and lid after my bag fell off on the highway and scraped it up pretty good. Heck i still have it in the garage someplace. Anyhow - I agree with Steve this is very easy to do. I was fortunate as all of the hardware was salvageable with the exception of the reflector and the reflector holder that got ground down as is slid down the highway after it fell of the bike. I digressed but I replaced those twist pins that the 14 had with HD # 90201540 that screws that bag into place and look much nicer.

@billrobbins4996 5 жыл бұрын

I like it Steve, thanks for your informative video.

@jasonrussell1948 4 жыл бұрын

This helped me greatly! I have a different set of bags than your company but it looks like the same hardware kit! thank you very much on this instructional video!!

@sikbaggers 4 жыл бұрын

Youre very welcome Jason...all 2014 and newer hardware is the same no matter where you purchase its.its pretty universal across the board...glad the video helped. .

@aliciarangel1630 6 ай бұрын

Thank you so much for creating this video! I was able to put my bags together because of this video! Very much appreciated!!!

@sikbaggers 6 ай бұрын

thank you very much aliciarange and glad to help!

@Hard_Right Ай бұрын

not sure how , they didn't show anything up close, and used generic descriptions like "make sure "x" is facing "down"" ... which down ? down if it's on the bike /bags and their sitting upright or down now since you have it sitting on table upside down??? see how it would be confusing? especially since I don't even really know what the point of this all is. honestly this deal looks like a cheap flimsy version of what came on my bike from the factory

@jonfd1 9 ай бұрын

Man thank you so much, I really mean it from the bottom of my heart brother. I been putting this off for so long due to my hardware getting mixed up

@sikbaggers 9 ай бұрын

Youre very welcome! Im glad it helped you!

@vicentdeleon8487 3 жыл бұрын

Thank so much my friend for clear me.

@EddieB2047 4 жыл бұрын

Very helpful thanks for posting

@sikbaggers 4 жыл бұрын

youre very welcome

@iceman7262 5 жыл бұрын

Once again an outstanding instructional video. Thank you

@patriotgaming2429 2 жыл бұрын

My kit was missing hella shit lol great service.

@sikbaggers 2 жыл бұрын

Did you contact them? they will line it out

@mattroyster1 2 жыл бұрын

Your heavy breathing really does it for me!! LOL 😂 just kidding. Awesome video thanks for the help. 👍🏻

@sikbaggers 2 жыл бұрын

Yeah sorry man my buddy that was helping me that day has bad asthma...he was having a rough day. We noticed that while I was editing the video lol hope the video helped though

@MCheekeOutdoors 3 жыл бұрын

Do these kits work on earlier bags 93-13 ? Thanks

@3fiddy2720 Жыл бұрын

@suzannesanders4764 3 жыл бұрын

need help putting latch back together after removing all the hardware to repaint. cant figure out where the sping goes to keep latch closed and make handle return to position

@metalman065 3 жыл бұрын

I know this is an old video, But, a crazy question for you, Can you convert a set of the old type saddlebag lids and hinges to this on touch system? My bike is a 2008 Electra Glide Classic with the old style latches on them, curious as to if it's cheaper to just change out saddlebags and mounting bracket or trying this newer one touch latch system.

@richardbaechle9719 2 жыл бұрын

Think my lids are older, they don't have 4 tabs but 2 raised fiberglass spots the cloth gets screwed to

@C172ssv 4 жыл бұрын

I have a 97 both front and back back attach points look adjustable can these bags be mounted on a 97

@jamesberg4929 3 жыл бұрын

So does this work if you have a 6x9 speaker installed in the lid?

@labronfreeman6783 4 жыл бұрын

Do you use threadlock on the Screws?

@scott8630 4 жыл бұрын

SIK baggers: Thanks for the video.. Is there a kit for converting the bags on my 09 street glide to this new latch system? Also was looking for a way to make them lock with a fob or button on dash panel.

@sikbaggers 4 жыл бұрын

not that I am aware of..the bags and lids from the 09 to 13 and the 14 to newer models are completely different.

@pixman58 3 жыл бұрын

Hoping you can help me. Great video by the way very informative. My question is what to do when the lids don't lineup with the bags? I've tried everything and can't get them to close properly like the mounting hardware is bent or something. Top of the bag won't line up with the rubber seals. Can't notice anything obvious other than the poor fit. Any advice or experience with this? Greatly appreciated.

@lmb1010 Жыл бұрын

I’ve got the same problem with one bag not a big deal but I have to push on the back to get the lid to close all the way it will pop in place

@user-qs8qf7ij6v Жыл бұрын

How will this system work with the added weight of a 6x9 diamond speaker added to the lid ? Seems to be what my issue is with the stock Harley hinged lid not being able to handle the added weight.

@sikbaggers Жыл бұрын

all of these one touch hardware kits are the same as harleys....they will handle the weight.

@averyb60 Жыл бұрын

Can you run 6x9 speaker lids with the hardware

@sikbaggers Жыл бұрын

yes...its all the same hardware from 6x9, dual 6x9, 8" lkids..its all the same hardware

@geralda9119 Жыл бұрын

But if your using your oem lids on advand black saddlebags just the latches need to be put on the bags right?

@sikbaggers Жыл бұрын

yes, remove the lid via the 4 screws in the latch. two in the tether/latch and two under the tether/latch. This video is for anyone switching to the 14 up from the 13 down lids and bags

@jphnr22 4 жыл бұрын

Hey Steve, just received my one tough latch hardware, didn't receive the reinforcing plates or the metal tether strips but I digress...There is a small bag with black screws (labeled D) in your graph. Can you tell me what those are for? I can't seem to find where they mount! Thanks and love the videos!

@sikbaggers 4 жыл бұрын

The screws labled D are for the holes that hold the entire assembly int the lid along the edge. Click this 6:55

@allenandrews7750 5 жыл бұрын

Installed my bags assembled by advanblack straight out the box. Right bag lid binds when closing latch and the rear outter corner lifts leaving a gap between the bad and lid on that corner. Any way to adjust this?

@sikbaggers 5 жыл бұрын

best way to adjust this is to remove the 2 outer screws on the tether to expose the 2 inner screws on the hinge...loosen those just slightly to where the lid moves a little...close the lid and lock it completely down to seat it. carefully open the lid and crank the 2 inner screws back down..that will set the latch..before you put the tether back on try to close it and see if it lined up. if it did...add your tether back on. the inside of the latch system is not grabbing the strike bracket correctly. Its like a hook system. The latch system moves forward when you press the handle down and that hooks into the strike brackets. It sounds like the inner latch is not grabbing the strike bracket but rather going over it forcing the lid to pry open. By setting the hinge correctly this should now hook it rather than go over the top of it. 99% of the time just adjusting the hinge will fix this. Its a small hole and small screw but there is some play in it that hinge. Please let me know how it turns out and we can go from there to make sure we get you lined out.

@db8138 2 жыл бұрын

If I just had my bags painted and the pulled the weatherstripping off can I reattach it with silicon or what would be your suggestion?

@sikbaggers 2 жыл бұрын

you can but hwat a mess that will be ...jump on amazon and get a new set. 14 bucks Prime smile.amazon.com/Gaskets-Saddlebag-Davidson-Replaces-90675-93A/dp/B07STW4Z5X

@goblinmcmonster8981 4 жыл бұрын

Hi ! Is there eny set that can put in 2013 saddlebags ?? And keep making exelent videos :D

@sikbaggers 4 жыл бұрын

you can convert your bags to a 14 up and use 14 up bags, l;ids and this hardware however there isnt anything that converts 13 down to 14 up lids that I am aware of.

@peterburke867 5 жыл бұрын

Can these be keyed to my match my ignition key so I don’t have 2 additional keys?

@amberbali8881 4 жыл бұрын

Take the lock to a good locksmith and have it rekeyed to your ignition switch. I just did the same.

@michaelbergum-ie1yq Жыл бұрын

Does that system work on pre-14 bags as I have a 2010 street glide

@sikbaggers Жыл бұрын

no...the one touch hardware is only for the 14 up...there are no conversion kits...you would need to change your bags and lids to have this hardware.

@posttal216 2 жыл бұрын

why can this kit be used on a 2000 ultra classic...all the kits I see start at 2014...whats the difference...is it something you can make work with a little modification ? ?

@sikbaggers 2 жыл бұрын

the latch system was redesigned in 2014. The reason you re seeing 2014 and up is because that's all they will fit. The hardware is no where near the same and no modification can make it work. The bags arent even the same size. You can do a 2014 up on a 2013 and older however you need to do the bags, lids and hardware. You cannot simply swap hardware between those two designs.

@kbrett2004 5 жыл бұрын

Pretty secure without using locktite on the screws? Unsure cause I realize it's plastic but just wanted to ask. Thanks

@sikbaggers 5 жыл бұрын

Hey Brett,,,,to be honest man Blue loctite is my best friend. I use it on about everything...I highly recommend it

@ericalbanese846 Жыл бұрын

So this is for 2014 and newer ones you can’t use this kit on the older style bags from 2013 and down to put one touch in them correct

@sikbaggers Жыл бұрын

no there is no kit on the market that converts 13 down lids to 14 up....the one touch hardware is only for 14 up

@porkchop7268 4 жыл бұрын

Is this or do they have a kit to convert the 09-13 bags to the one touch system?

@sikbaggers 4 жыл бұрын

No kit needed. You will have to convert the whole thing though...bags lids and hardware..please chek out my video on how to adjust the front bracket to make them fit. Takes about 15 minutes to do and you can run the newer style bags. kzfaq.info/get/bejne/gsl-lLJe15avm5c.html

@dcxplant 2 ай бұрын

Bags don't come with the hardware?

@sikbaggers 2 ай бұрын

the hardware is in the lid....why would bags come with hardware? The only thing that touches your bag is 4 screws that go into it from the lid hardware.

@crazystax1 Жыл бұрын

did you leave out how to install the wire?

@sikbaggers Жыл бұрын

2:15

@joshuaernzen3235 2 жыл бұрын

Can you buy just a bolt/screw kit for this application?

@sikbaggers 2 жыл бұрын

you can buy the one touch hardware but its the hinges and everything ...I dont think anyone offers just the bolts and screws

@bucknutz2879 5 жыл бұрын

That's killer. Would these fit my 2011 Road King bags? Is there any difference between the 14 to 11 bags? Thanks

@sikbaggers 5 жыл бұрын

Hey Buck...these are for 14+ bags and lids....13 down bags have very different latching systems. You can however run 14+ bags/lids on 13 down bikes. You will need to replace the bags, lids and this one touch hardware. I have a video on installing these and the mods you need to make to do so on my channel. kzfaq.info/get/bejne/gsl-lLJe15avm5c.html

@bucknutz2879 5 жыл бұрын

@@sikbaggers Thanks so much, I'll check it out.

@chrisgaudet1 2 жыл бұрын

I have stretch bags on my 99' RK, will I have to buy new lids or can I use the same lids on the bags now?

@sikbaggers 2 жыл бұрын

Hey Chris..what are you end goals? I ned to know what youre doing before i can answer that...what year stretch bags do you have and what year lids are you wanting to get? the years go 86 to 13 and 14 to newer...please let me know.

@chrisgaudet1 2 жыл бұрын

@@sikbaggers newer bags and lids ..and I wanted those latch handles for easy access. I did find the insert for the lids on google. The only thing I see different on the lids, is there's no hole for the handle but easily rectified lol...your videos are awesome and informative and appreciated....thx man....

@leanderuzzell5213 14 күн бұрын

Will this work the same way with dual 6x9 lids?

@sikbaggers 13 күн бұрын

installing the hardware part is the same...youll have the dual 6x9 speaker tray to add in as well..but the hardware is the same

@beepbopboop1303 3 жыл бұрын

@sikbaggers So this kit turns my 2013 FLHX bags into the 2014 style?

@sikbaggers 3 жыл бұрын

No...this is one-touch hardware for 14 up lids. there is no kit that converts old lids into new ones. You can upgrade to 14 lids with the one-touch hardware but you have to do the bags too. The bags, lids, and hardware all have to be upgraded.

@beepbopboop1303 2 жыл бұрын

@@sikbaggers aaaaaah! So there’s no lid kit that allows me to open my 2013 lids like a 2014 lid. I hate having to get off my bike and open and close my lid to put stuff in. My buddy has a 2015 and he can open and close his kids without having to deal with stopping and getting off the bike

@sikbaggers 2 жыл бұрын

@@beepbopboop1303 No, the hardware is completely different, the lids are slightly bigger and mounting holes are not the same on inside of your lid or the bags. There is no kit on the market that converts this to 2014 up one touch latch system. you will need to buy the bags, lids and hardware and then do the conversion I showed in this video to get them to fit your bike. kzfaq.info/get/bejne/gsl-lLJe15avm5c.html

@adamhenderson8768 2 жыл бұрын

How do line up to drill holes on lids with no holes

@sikbaggers 2 жыл бұрын

not sure what you mean? drill holes for what?

@adamhenderson8768 2 жыл бұрын

@@sikbaggers I have redfox baggers rear end kit and there are no pre drilled holes on bags or lids and there aren’t in videos out there to help. Also my locks that came with kit from you guys just fall off when I screw them on from the inside. The hinge holes have threads but the holes in actual lock does not. I have to screw them on from outside to get them to stay in place.

@sikbaggers 2 жыл бұрын

@@adamhenderson8768 Im not sure about your bags ...that's on redfox baggers...Our lids are pre drilled for the hardware and hinges. I would call redfox and ask them

@adamhenderson8768 2 жыл бұрын

@@sikbaggers are the locks that come from you guys supposed have threads in the 2 holes

@Jacblack69 Жыл бұрын

Steve can I use my lids with that hardware?

@sikbaggers Жыл бұрын

Hey jack I dont know what year lids you have but this hardware will only work on 2014 and newer lids. You cannot use it on 13 and older.

@Jacblack69 Жыл бұрын

@@sikbaggers ok,so is there a kit for 2011 road king steve?

@Jacblack69 Жыл бұрын

@@sikbaggers btw I have aftermarket tct 5' stretched bags

@danielrobert6836 4 жыл бұрын

I try to follow you but your missing some step

@sikbaggers 4 жыл бұрын

what is it that you think im missing?

@Kenn1969 5 жыл бұрын

All that and you didn't show what they are for or how they work!!

@sikbaggers 5 жыл бұрын

It comes stock on 14+ bikes. I am showing how to install it in case guys with 13 down bags want to install 14+ bags. You saw me add a hinge, thats a hinge to open and close your lid, you saw me add a lock, that locks your lid, you saw me add a lever and strike brackets, that latches your lid to your bag. This is everything you get in a one touch hardware kit. I showed you how to install it. I am honestly not sure what is NOT self explanatory about this product. Honestly...im baffled.

@jdkmboy 5 жыл бұрын

Do you have a bagger, OR are you just a dumb shit? This is one of the most simplistic videos I've seen in a long time.. this guy did a great job walking us thru the instructions for the lid and bag hardware "that replaces and upgrades" your old bag hardware.. and your question about what it does??? Facilitates you OPENING AND CLOSING your bag lids!!! Steve - well done bro.. just ignore that jackass.

@Kenn1969 5 жыл бұрын

@@sikbaggers Thanks Steve, Your first sentence in your reply answered my question cause I have an 09 Utra. Thanks for clarifying, God Bless.

@petelanzone484 5 жыл бұрын

@@jdkmboy LOL! OMG why do folks not read and listen. James your first comment cracked me up! Steve well done!

@stanwerner7484 4 жыл бұрын

Can these be keyed to my match my ignition key so I don’t have 2 additional keys?

@sikbaggers 4 жыл бұрын

Yes sir. this has to be done at HD. give them your vin and the code under the black plastic on your key and they will make a new tumbler for your bike. Its around 35 bucks last I checked.

@amberbali8881 4 жыл бұрын

@@sikbaggers Harley will sell you the whole new lock. Just take these locks to a locksmith and have rekeyed. I just did this.