Should you go integrated cockpit?The first steps for installation.
Пікірлер: 194
@mmse88Ай бұрын
I love to watch your video because everything is very straightforward without any bullshit😅
@ducatiparts110mb3 жыл бұрын
Before cutting the steerer tube and running cables internally, I like to do a quick build with external cables and uncut steerer. Then I can ride an hour or two on the rollers to be sure everything is right before committing to the steerer length and re-running everything internally.
@bobbymooreok4 жыл бұрын
I like before I watch, you just know this content is gold++
@seal1mas4 жыл бұрын
I'm always looking out for the OZ Cycle videos more than others!!
@michaelmusson35933 жыл бұрын
Just want to thank you for your videos on the Yoeleo 12 just bought one and got it about a week ago my first enigma was where is the top race for the front fork had no idea it was the C looking spacer acts as a race. You are a god send to me. Will be studying your sight to get this bike together. All my bike till now were early late 80's and 90's bikes steel frame Italian.
@ahmadashraf75292 жыл бұрын
Red and black colour scheme is just superb combination. My favourite.
@abdul86853 ай бұрын
I concur 100%
@stuartmclean38432 жыл бұрын
Just found this channel, absolutely 1st class 👍
@michaelbonnen9791 Жыл бұрын
Great video, full of info. Definitely made me thing twice before getting Intergrated bars.
@qibble4554 жыл бұрын
Great video. The bike looks awesome with those wheels and bars.
@georgeat50plus184 жыл бұрын
Love how practical your videos are. Small thing, it is 'flare' not 'flair'.
@paulperch51694 жыл бұрын
Excellent! Perfect description. We all need this information...
@Tomanart2 жыл бұрын
Excellent video, I do think the designers/manufacturers have made a mistake with this one. Yes it looks very neat, but there are thousands of older cyclists who have less flexibility so prefer a more relaxed style and that is where bikes with conventional stems come in helpful with the option of being able to swap and change to get the right degree rise for best comfort, but that is impossible with this integrated stem so I think sales will be reduced.
@fabiopunk16616 ай бұрын
nice - impressive how flexible they are. I can't say I like it....
@roneysilveira76064 жыл бұрын
Good day: PERFECT that exactly what I was waiting for: 👏🏻👏🏻👏🏻👏🏻👏🏻
@mrmatthewking4 жыл бұрын
Agreed, have been eyeing these bars off but was nervous about their stiffness. Good to see they're not a wet noodle like those last ones you reviewed.
@dv28524 жыл бұрын
Good on you mate! Great content as always. Regards from Wangaratta.
@Demon09-_-4 жыл бұрын
when I measure reach most times I measure to the hoods of the shifter. as the reach of the bar can varry when transfering from bike to bike
@TommyTheSurfer14 жыл бұрын
a maintenance nightmare with little to none adjustability. good video though!
@Sanechel19914 жыл бұрын
but cycle looks so amazing
@TheDTYW2 жыл бұрын
Thanks for sharing I love your video. I’ve been looking for one now.
@stuartdryer13524 жыл бұрын
I'm never going to get integrated bar/stem but I was curious how they work.
@NeutralGenericUser2 жыл бұрын
IMO, the best part of integrated bar/stems is the fact that the bar cannot slip. I once had my carbon bar slip from the stem when I hit a pothole at an intersection. I almost ended up under a car, because my bar was now facing downwards, and almost impossible to operate. I barely managed to stop the bike safely to adjust/tighten it.
@yonglingng56402 жыл бұрын
Did you use carbon paste on your handlebars? Torque spec alone isn't enough you know.
@detmer874 жыл бұрын
@14:00 *YIKES!* If you ask me that one is only good for the dustbin.
@Demon09-_-4 жыл бұрын
ah ya the cheapo stuff is stright dustbin material yoeleo and some other brands make very decent stuff
@fjt3637 Жыл бұрын
How do we call this kind of Man 🤔????....A PRO !!!!!
@LordVilmore4 жыл бұрын
Nice video! Hopefully the internal routing video is out by the time I get my R12 frame and start building.
@lovenottheworld5723 Жыл бұрын
The compression plugs should be long enough to go past the top bearing. That's where they snap so you'd get a bit of a second chance if the plug was hanging on inside. They don't seem to do it though.
@OralMaster Жыл бұрын
slam your stem
@abdalrhmanammar8502 жыл бұрын
شكرا لك علي هذا المعلومات الرائعة حقا انا اتعلم منك كل يوم شيئ جديد 💪👍
@detmer874 жыл бұрын
I got "The one" carbon integrated handlebar from Pro Cycling in 380mm width. I'm 88kg and it feel just as solid as a aluminium stem and handlebar.
@adamkubiak19334 жыл бұрын
Detmer the width...
@detmer874 жыл бұрын
@@adamkubiak1933 Eh..? English is my third language. Did I f*ck up somewhere? Anyway I got this one: kzfaq.info/get/bejne/hNtzipegptjUhYk.html
@adamkubiak19334 жыл бұрын
Detmer at 38 cm the handlebar is rather narrow. Too narrow to judge wether products from the line are stiff.
@detmer874 жыл бұрын
@@adamkubiak1933 Yeah, you are absolutely right. I can only confirm it's as stiff as a Cannondale C3 460mm wide handlebar that came with my Cannondale Synapse Carbon Disc 105 bike.
@Mxrobius4 жыл бұрын
@@adamkubiak1933 There is a stiffness test for that bar on weightweenies forum.
@6klaus62 жыл бұрын
*Looked at a lot of options for getting my **Latest.Bike** . Great find in SAVA. Super light, nice components, really good value as it comes with many options only found in much higher priced bikes.*
@AfonsoRamosmtb4 жыл бұрын
As aways, great Video, and now you have 2 new Yoleos? Thats really nice! Yoeleo its a awasome brand, and im sure your videos are really good for then. Waiting for the next one, tks mate!
@arnaudseynaeve92662 жыл бұрын
Very bad experience for me with Yoeleo. I ordered the R11. After 3 and a half months, they tell me that my frame is finally in paint and 10 days later, Yoeleo tells me that they no longer have... the frame in stock in my size.
@xjoelportox4 жыл бұрын
You shouldn’t grease the bolts because it reduces friction. Therefore you need a higher force than the recommended Nm to get them safely secured. And to much force may damage the threat and the material.
@stevenleffanue4 жыл бұрын
To obtain correct torque threads need to be lubricated
@MonMalthias3 жыл бұрын
You can actually get closer to "true" torque with greased threads: www.reliabilitysolutions.net/single-post/2015/09/21/Why-do-we-Lubricate-Threaded-Fasteners When torquing down a fastener, a lot of the work is actually done to overcome friction between the threads of the bolt and the nut. But that also means that you can overload a bolt (or undertorque) if, say, some of the threads are not cut correctly or there was a dent on one fastener. Greasing the threads gets you more consistent torques, more of the time. Having said that, you should do whatever is specified by the manufacturer, not just whatever is "common practice." Manufacturers specify how things should be torqued down - be they with grease, dry, with threadlocker, or otherwise. If the factory says do them up dry, do so.
@cnay29833 жыл бұрын
Integrated bars are annoying to change cables. And they tend to bend pretty tightly. I would probably go back to a normal seperate alloy bar and stem combo once I crash lol
@DeStraatz4 жыл бұрын
Always a good tip to use a ceramic tile blade (or carbon fibre blade but $$$) for steerer cutting, clean finish and reduces fraying (Y)
@StopTheRot4 ай бұрын
2 questions: 1. Do you know of any -17 options? 2. Is a spacer always needed under the stem?
@stevenleffanue4 ай бұрын
What is -17 option? You can have no spacer under the stem.
@mohamadbilal37753 жыл бұрын
Apik lurrr 👍👍👍👍🇮🇩🇮🇩
@adiiiAC3 жыл бұрын
Great video 👍👍
@viajandodebike20223 жыл бұрын
Wonderful Bike. Here in Brazil it is very expensive.
@RadioSnivins4 жыл бұрын
15:33 That middle bollard is utter lunacy.
@stevenleffanue4 жыл бұрын
Theyre everywhere on our bikeways. One of our guys hit one recently...he's ok. The bollards are to stop people driving vehicles on bikeways.
@adamkubiak19334 жыл бұрын
We have them everywhere here (Poland). If you know the bike way, you’re fine. But whenever someone is following me I feel urged to remind them of the ballard...
@h2h2sam4 жыл бұрын
Oh, there is another r12 hanging on the stand? Rear axle problem got a replacement?
@detmer874 жыл бұрын
@@stevenleffanue The local authorities should fix those dangerous situations! In the Netherlands you can even mandate it through the national cycling covenant...
@wheellifecycling4 жыл бұрын
Just came up on your channel... Nice
@miguelangelmarquezgonzalez99663 жыл бұрын
Hi, thank you for your videos. I would like to upgrade my Merida scultura disk bike with this handlebar but I wondered if you can install this in an usual frame in order to hide the cables changing the top bearing headset and the whasers. Thanks so much and grettings from Spain
@stevenleffanue3 жыл бұрын
As long as the headtube is 1 1/2" at the top
@miguelangelmarquezgonzalez99663 жыл бұрын
@@stevenleffanue thank you so much. I must check it, my fork tube is 1 1/8" so I think is possible. Last question. Are the special washers included with the hadlebar o you must buy separatly? Thanks for your patience
@kriterium1233 жыл бұрын
Great content
@glennoc85854 жыл бұрын
I don't mind the hidden look but i prefer the adjustable tilt of a two piece.
@hamletcabrerart2 жыл бұрын
👏👏👏
@reedjacksonmaccom2 жыл бұрын
I didn’t notice if you mention stem angle. Those appear commonly 0° in the integrated. Is that your findings as well?
@stevenleffanue2 жыл бұрын
-7degrees
@christerohlsson90343 жыл бұрын
As long the plug sticks a bit lower than the bottom part of the stem which is the critical part
@kaupo802 жыл бұрын
@7:45 there is visible crack in the stem (inside the steerer tube hole).
@stevenleffanue2 жыл бұрын
Wasn't a crack but a void. Not the best but doesn't affect clamping or strength hardly. I'm still riding with the same bars at 6,000km , they're fine
@thomasvanalphen49693 жыл бұрын
Great content, thank you! Would this setup work on my Specialized Tarmac Pro Sl6 with Di2? Very keen to neaten up the front!
@Fluxyzabc2 жыл бұрын
How can you be sure about compatibility with the frame? I have the velobuild 168 and am interested in the yoeleo bars.
@stevenleffanue2 жыл бұрын
Fork steerer should be 1'1/8" and frame headtube needs to have a large enough diameter to allow cables thru it.
@DanLa Жыл бұрын
love youvideos....do you recommend using integrated bars with rim break bikes?
@stevenleffanue Жыл бұрын
No. The calipers are in wrong positions for it.
@entername65994 жыл бұрын
Awaiting my r12 patiently....more or less....
@LordVilmore4 жыл бұрын
Mine already arrived in europe... waiting for customs now. :)
@entername65994 жыл бұрын
What BB?
@LordVilmore4 жыл бұрын
@@entername6599 I bought a Moquai BB 386 to 24 shimano. Its a screw together type. Only found on some german shops. If I have problems I can always consider something more expansive (hambini)
@stevenleffanue4 жыл бұрын
I have this same Moquai BB386 and its good quality and sensible non-creaking installation. Bought on Ebay.
@entername65994 жыл бұрын
For a bit of experiment I’m putting the sensation empire pro 2x12 groupset on. The BB is the last puzzle piece.
@geraldcrook508710 ай бұрын
Hi mate i have a problem trying to figure out my internal stem cables. Road bike rim pull internal cables . I have no problem feeding them through the bars and stem. The thing i cant grasp is ,I have 3 internal plastic inner cable sleeves that i must put my front & rear & brake cable ( rim brake ). there is no cable stop for the outer cables from the stem . what cant i see or what do i fix it with. many thanks Crooky south wales UK
@stevenleffanue10 ай бұрын
The outers go all the way to the gears or calipers
@vkutsenko3 жыл бұрын
Super informative series of videos re internal cable routing. Thanks! I’m really struggling to find headset for internal cable routing as in your video. Can you help with the link where can I buy it? Thanks!
@stevenleffanue3 жыл бұрын
Google images....there are quite a few you can purchase
@milesearl35044 жыл бұрын
Great video, thanks. Do you know what the flare is on these bars? They are sized from the width at the drops, but can't tell me what the width is along the top of the bar. I currently ride Easton EC90s that are 38 c to c at the tops and 40 c to c at the drops, so want to make sure that ordering a 40cm width will give me around 38cm at the tops.
@stevenleffanue4 жыл бұрын
My Yoeleo integrated bar is 42cm c-c on drops , 39 c-c at hoods Miles. Id say if you order 40cm they should be 37cm on the hoods.
@milesearl35044 жыл бұрын
@@stevenleffanue great thanks. It sounds like you recommend Yoeleo frames and handlebars, having no concerns about quality? Are you independent and just like the brand or are you endorsed by them in any way?
@stevenleffanue4 жыл бұрын
Independant,not endorsed by anyone. I actually gave a negative review on their previous integrated bars.
@HN-vi9nv Жыл бұрын
is there such thing as a SL6 stem compression ring with gaps for internal cabling?
@yonglingng5640 Жыл бұрын
The compression ring is for the steerer tube, not the stem. Are you talking about a headset cover?
@HaveYouHeardTV2 жыл бұрын
an you use integrated handle bars if you are using rim break?
@stevenleffanue2 жыл бұрын
Yes but not for front brake cable
@zakdk14 жыл бұрын
As aways, great Video
@rafaelfolhasdasilva43633 жыл бұрын
great video. one question is it need a barel adjuster for the front deraileur
@stevenleffanue3 жыл бұрын
Front mech has its own trim screw
@rafaelfolhasdasilva43633 жыл бұрын
@@stevenleffanue thank you sir i love the videos
@billfrigo7602 Жыл бұрын
How can I look up frame / headset compatibility? I have a 2021 Bianchi Oltre XR3… mech Ultegra.
@stevenleffanue Жыл бұрын
Best to go to the Bianchi website and see what they say - top and bottom headset and fork steerer size need to match
@liborgulometos40862 жыл бұрын
Hi Oz I would like to ask you for your advice. Should I put some carbon gripper paste into of steerer tube (fork) where the wedge expander is seated? I have had Canyon H 31 Cockpit and when I wanted to set up cockpit up or down I could not tighten the cap screw. The screw started cracking and plastic liner has been broken. The wedge expander been pulled up. That means that I wanted to tighten the cap screw for 2 Nm and the wedge expander is pulled up through cap screw. Thank you very much I appreciate your help. Kind regards. Libor Nemcok
@stevenleffanue2 жыл бұрын
Yes , grip paste will help the expander plug grip inside the steerer
@liborgulometos40862 жыл бұрын
@@stevenleffanue Thank you Oz, do you think that would be possible after application of carbon gripper to tighten the wedge expander more? There is limit 4 Nm may I use for example 4,5 Nm? I do not want to wedge expander pull up by cap screw. Thanks.
@stevenleffanue2 жыл бұрын
Clean the surfaces of the compression plug and inside fork steerer with isopropyl alcohol before applying paste...it will grip.
@liborgulometos40862 жыл бұрын
@@stevenleffanue Thank you very much. 👍👍👍 Kind regards Libor
@simeongeorgiev5313 жыл бұрын
Can it fit 1 1/4 canyon ultimate fork?
@donoldduckben4 жыл бұрын
Just sent mine off to the builder, had some trouble with the headset bearing , the hole on the frame is a bit too small , and the internal cable routing according to my builder is troublesome to say the least
@donoldduckben4 жыл бұрын
Also had to wait a rather long time for the frame and when I got it, I realised they need me to wait for an extra few days for the handlebar, all in all not the best of experience, hopefully the riding quality will be better
@mrpf064 жыл бұрын
Nice!!!👍👍👍👍👍👍
@bossg28173 жыл бұрын
is this compatible for rim brake frame?
@Jazon29013 жыл бұрын
Hey mate love the videos, its interesting that you spoke about clip on try bars, ive been trying to find something suitable for this style of handle bar but haven't had much luck, do you have any suggestions?
@brygry3 жыл бұрын
Yeah, stick with separate stem and bars....
@georgeelias83823 жыл бұрын
Anyone know if this works on a 2018 aeroad?
@azwaniskandarazmi81772 жыл бұрын
Hi Sir...Just need your opinion whether fully hidden cable can be made or done on Trek Domane SL5? I noticed in the earlier part of the video shown that bike. Would you advised me on how to fit a fully hidden cable on Domane. Thanks for your time mate!
@stevenleffanue2 жыл бұрын
You can if the top of the headtube is 1 1/2" . However you cannot put brake cable thru the fork without a hole drilled in the steerer.
@yonglingng56402 жыл бұрын
Is it the current-gen Domane SL? It's impossible.
@giocre743 жыл бұрын
ottimo video
@mrskeltal32813 жыл бұрын
does that Yoeleo bar come with all the caps/spacers etc for underneath?
@stevenleffanue3 жыл бұрын
No , they come with the frame
@vedhed79693 жыл бұрын
Have you got a review video or even just some impressions of the yoleo integrated handlebar?
@stevenleffanue3 жыл бұрын
No but will do soon in a "Yoeleo R12 bike review" Vedran.
@vedhed79693 жыл бұрын
Ok thanks. Considering ordering the yoleo handlebars…would you have any hesitations recommending them?
@stevenleffanue3 жыл бұрын
They are fine. If you are internal cable routing work with patience.
@derekhobbs11024 жыл бұрын
That tunnel at the end under expressway has a strange optical illusion that looks like someone has strung a wire across it. Scared the crap out of me one ride
@stevenleffanue4 жыл бұрын
Owwww,thad be nasty!
@madmonkeycycling90984 жыл бұрын
Once you've ridden the R12, can you go downhill over 55kph? I have an R12, and suffer severe speed wobbles, I'm curious if this has anything to do with the overall stifness of the front end and fork, or if this is a wheel issue
@stevenleffanue4 жыл бұрын
Will be doing
@johnsalvador74813 жыл бұрын
This is a very nice headset kit for internal routing. Where can I buy this headset kit?
@stevenleffanue3 жыл бұрын
Yoeleo
@johnsalvador74813 жыл бұрын
@@stevenleffanue does Yoeleo sell just the headset kit? Or sell the handlebar and stem with the headset kit?
@pskonejott25684 жыл бұрын
May i ask which headset bearing is for the top and bottom? I got mixed up the taller one top?
@stevenleffanue4 жыл бұрын
7mm for both but if you have smaller it goes on top race
@MichaelE.Douroux3 жыл бұрын
Noticed what looked like the new Trek Domane SLR at the beginning of the vlog. Any opinion or feedback from your friends on Trek's IsoSpeed?
@stevenleffanue3 жыл бұрын
Yes he likes it plus wider tyres on it however its a heavier bike
@MichaelE.Douroux3 жыл бұрын
@@stevenleffanue Thanks from South Florida!
@seanreilly66182 жыл бұрын
Hi Oz, I have a pair of the metron 5D ACR that I am just now realizing that the headset top that merge with the spacers is too wide for my headtube diameter, do you think that if I just run them all the way slammed, that it would be safe and reduce that kind of terrible round headset to intergrated bar stem look which is just visually wrong. Thanks!!!!
@stevenleffanue2 жыл бұрын
The height of the stem should accommodate your riding position. If you slam the stem it may be too low and cause inefficient riding style. Your bike fit is more important than aesthetics.
@seanreilly66182 жыл бұрын
@@stevenleffanue Oh yeah it's all no problem to me as I already run it quite low regardless, do you think running it with no integrated top cap would be okay ?
@stevenleffanue2 жыл бұрын
Yes that should be fine once you have set your bearing compression and tightened the stem to the steerer , no top cap necessary, although if it rains water will enter your steerer tube.
@seanreilly66182 жыл бұрын
@@stevenleffanue Ah sorry my terminology is a bit rusty, I'm reffering to no no dust seal or bowl cover!
@barcelonaryan91414 жыл бұрын
New from your channel but do you have a video about bike fitting? It would really help , love from the philippines
@stevenleffanue4 жыл бұрын
I havnt done one Ryan because there are so many already.
@barcelonaryan91414 жыл бұрын
Ohh I see
@a.sarmiento51164 жыл бұрын
You have such nice bikes. Aside from di2 gears are there also wireless brakes? Hope you can feature them.
@stevenleffanue4 жыл бұрын
No wireless brakes,no.
@davidbaskara11834 жыл бұрын
Hello sir...I am waiting for my new emonda sl6 arrive. Do you think yoeleo handlebar can make cable routing in new emonda look hidden? Is it compatible?
@stevenleffanue4 жыл бұрын
To run cables into a headset the top part needs to be 1"1/2. ..the Emonda is only 1"1/8
@Hawlkeye-e9p4 жыл бұрын
Open cut will collect water over time. Good call.
@emrahkhan4 жыл бұрын
Double take? I am seeing a second R12 hanging.
@stevenleffanue4 жыл бұрын
Yes Emrah, that one has a downtube opening for Di2 junction box
@brianbaldino34964 жыл бұрын
Built up a an araya wheelset with araya rc 540 rims, DT swiss 2.0 1.8 2.0 Double butted, laced to Ultegra 6500 hubs 14 gauge spoke nipples. Big problem, the rim has lateral distortion to the side of each of the eyelets - the distortion isn't at the eyelets it's at the braking surface as if it is jittery when braking - I have close to perfect equal tension throughout. Rebuilt it again with using oil on threads and eyelet holes still same result. Gotta be over tensioned spokes causing the distortion right? I've got an average of 160 Kilograms of force on the spokes, should I reduce the tension to 117 kgf? There is no cracking of the rim, and when I de-laced it the destortion went away but when I retensioned it again it got distorted again. Could I have permanently distorted the rim? Can you give advice on this?
@stevenleffanue4 жыл бұрын
Yes,sounds like you have over tensioned it. Once alloy has been changed to a different shape it springs back a certain degree but will not be as it first was. Im assuming you want a stiff wheel? Use 36hole,straight 14 guage spokes.
@brianbaldino34964 жыл бұрын
@@stevenleffanue I've trued wheels that were out of true by 5 mm and never permanently distorted rims, how can a slight 0.05 mm distortion from over tensioning cause it to not be as it first was?
@stevenleffanue4 жыл бұрын
Your description Brian sounds like the distortion is at every eyelet?
@brianbaldino34964 жыл бұрын
@@stevenleffanueYes, it's like the slightest little ripple on the braking serface area adjacent to each eyelet - 32 eyelets so 32 ripples 16 on each side, It's so minimal you can't true it out and when you ride the wheel it has a slight jitter when braking as a result. Had this problem on a different Araya wheel - araya VX 400 and was able to detension and rebuilt again to 173 kilograms of force and that fixed it , but with these Araya RC 540 rims it didn't work. Contacted Kerin Track store in Osaka Japan tonight waiting to see what they have to say.
@stevenleffanue4 жыл бұрын
What type of riding are these wheels for?
@olo3984 жыл бұрын
when are we gettin an update on the new bike?
@stevenleffanue4 жыл бұрын
This week
@olo3984 жыл бұрын
@@stevenleffanue Cool! Really looking foward to it because I'm really looking at the r12 or building up a winspace 1500 (with their wheel too which hambini tested to be really quick, dunno if that disc or rim), which are gonna be about the same price when you equip it out (usd). Thanks again!
@Hawlkeye-e9p4 жыл бұрын
Why anyone wears black clothing in the heat is beyond me. If its cold sure. Another cool vid. Ty.
@sc06080233 жыл бұрын
Looks nice but I'm such a lazy ass to be bothered with those integrated stuff.
@momon711 ай бұрын
is anybody gonna ask about the rice cooker?
@kampango7894 жыл бұрын
It is bicycle mechanics nightmare
@kuzzzzzzzzzzzz75113 жыл бұрын
it`s compatible of caad13 rim brake frameset?
@stevenleffanue3 жыл бұрын
Steerer needs to be 1 1/8"
@kuzzzzzzzzzzzz75113 жыл бұрын
@@stevenleffanue what? I want my caad13 to be integrated the rear brake and di2 wire
@kuzzzzzzzzzzzz75113 жыл бұрын
@@stevenleffanue All-New, BallisTec Carbon, direct mount rim brake, SAVE, 1-1/8" to 1-1/4" steerer, integrated crown race, 100x9mm QR, 55mm offset (47-54cm) 45mm offset (56-62cm)
@stevenleffanue3 жыл бұрын
Should fit ok then. You will also need the top headset pieces to pass cabling thru the headtube. All cables will need to exit the frame at various points. Front brake cable may need to exit at centre of handlebar.
@kuzzzzzzzzzzzz75113 жыл бұрын
@@stevenleffanue where can I buy it?
@derekhobbs11024 жыл бұрын
Harley is always saying to have the longer plug.
@flxgreen63464 жыл бұрын
Its going to be a beatiful bike , anyone with a spare carbon frame 🙁
@attybong2 жыл бұрын
just another justification for added cost and more profit for manufacturers, most ordinary riders don't need it anyway
@yonglingng56402 жыл бұрын
Sadly, those that started riding in the 2020s will lust over it because that's what they usually see on bikes these days. Any other configuration, they call it external routing, even for bikes like the TCR Advanced, just because they can see brake and shift lines outside. (I hate the way they call it) I say they're naively wrong about this. If they want to talk about external routing, they should look at 20th-century road bikes. Bikes like the TCR Advanced still run internal routing as the shift and brake lines still enter the frame and fork at some point.
@brygry3 жыл бұрын
Too conservative on steerer plug because you don't understand loading mechanisms, as most don't. How many pros have a spacer above their bars? Absolutely zero. Adding spacers above is also a good way to ruin the clean look you were trying to achieve by getting integrated bars.
@BBQEX3 жыл бұрын
I would prefer full visible cable route🤷🏻♂️
@Jpmam8324 жыл бұрын
Hi there can I have your email pls. I have ordered yoeleo frame. I plan to purchsse shimano ultegra Di2 R8070 group set. But I confused with this part (shimano EW-SD50)...there so many choice in length...which one is matching with Yoeleo R12 frame? Thank you
@stevenleffanue4 жыл бұрын
Sorry Im using mechanical gearing Jok. Always get longer wire than you measure for.
@Jpmam8324 жыл бұрын
oz cycle ok, tks. I think I’m going to use mechanical as well . So if I can get Shimano Ultegra R8000 plus BB 386 with 24mm crank diameter, will fit on the R12 correct?
@cup_and_cone4 жыл бұрын
The worst thing I see on integrated cockpit cable routing is people using cheap/generic cables. Spend the extra money and get really quality cables, like Shimano's Dura-Ace polymer cables. Not only will will it feel a lot better from less friction with all those tight bends, it'll last a lot longer before having to redo the very time arduous (and expensive if you pay a shop) process of re-cabling the bike.
@cup_and_cone3 жыл бұрын
@Wooly Chewbakker Unfortunately not always an option for everyone. I've seen plenty of Dura-Ace and Ultegra with whatever bulk generic cable their shop has. Really makes you wonder...
@thedownunderverse4 жыл бұрын
Couldn’t pay me enough to use carbon bars, let alone these integrated stem/bar types. Total lunacy!
@channul48873 жыл бұрын
8:24 in your other video you claim that compression plugs are unnecessary? You need to make up your mind (or just take that other nonsensical video offline as it's potentially dangerous to noobs).
@stevenleffanue3 жыл бұрын
A compression plug is required unless manufacturer states otherwise ie Canyon Aeroad. Its the top cap which is not require once stem has been tightened
@channul48873 жыл бұрын
@@stevenleffanue "A compression plug is required unless manufacturer states otherwise" Well then why did you not state it clearly in that other, highly misleading video?
@daimoonvesper207 Жыл бұрын
Nothing useful!!!
@Apex8204 жыл бұрын
They are just making it harder and harder to work on! I do 99% of my own bike work. I’m looking to buy a new road bike it’s all disk I like rim brakes easier to work on no messy oil. 🚴
@stevenleffanue4 жыл бұрын
Once set you shouldnt need to replace mineral oil for about 5 yers minimum
@ARGINH Жыл бұрын
Thanks for the video! Any experience with tne Deda Alanera bars? I sent you a message on instagram. If you get a chance, I’d love your feedback. Thanks again!