Stick welding stainless 6G

No video

Stick welding stainless 6G

Рет қаралды 597,297

Attis k

Күн бұрын

2 mm thick stainless pipe, stick welded.

Пікірлер: 237

@socalwelder 3 жыл бұрын

Stick Stainless, dude! Trying to control that puddle is probably the single hardest thing I know of in welding, the only way I can describe it is like melting crayons into the Sun.

@ttsupra87 2 жыл бұрын

Hahahaha you're not wrong

@Roes0 7 жыл бұрын

It's filled, it holds, looks good to me.

@rickfrier1647 6 жыл бұрын

If I could get it 75 % of that I would die of shock I'd be so happy

@attisk1779 6 жыл бұрын

Esab 63.20 elecrtodes 2 mm thick and amps are somewhere around 25-30 maybe.

@fathercharles5743 7 жыл бұрын

bout as good as it's gonna get vertical up with stainless rod . this type of welding is very unforgiving

@mrlooneycooney8948 7 жыл бұрын

wanting to learn to weld for years, now finally got a weldigmachine as a gift, an italian Deca stickwelder...not sure if this is the easiest way to start learning, but it's a beginning :-) If this would be the result after decent amount of practise, i'd be very very happy! nice job, thanks for sharing!

@weldingdata 10 жыл бұрын

Nice job. I often stock weld stainless whenever the conditions are right. In a maintenance and repair situation it beats GTAW. Esab makes some of the best electrodes I have ever used for SS. The SS fcaw can be a pretty useful process too.

@magnusklahr8190 9 жыл бұрын

Guys. This is a person how knows welding! Its nice to see a stainless pipe welded with stick.

@robertcerda92 7 жыл бұрын

Nice work, definitely harder than it looks.

@bryzeng 10 жыл бұрын

Another fantastic video, Thank you!

@attisk1779 10 жыл бұрын

Well thanks to you.

@MrJoseph1157 8 жыл бұрын

Nice job...and a nice video. Thanks

@PazuzuStalker 8 жыл бұрын

I would be extremely satisfied with that!

@caitlincarpenter5849 7 жыл бұрын

me too because he doesnt make big holes.

@benedictorodriguez8619 7 жыл бұрын

good an thank you

@MacielBenjaMiguel 8 жыл бұрын

muy bien esta bueno soldador como profesional su trabajo

@noahbrown2486 6 жыл бұрын

Looks good. I'd like to give stainless welding a try with my powerarc.

@peterdebeer7444 7 жыл бұрын

the keyboard welders

@volvo9051 5 жыл бұрын

XDDDD

@denz5025 6 жыл бұрын

good weld for me...using stainless rod is not easy,,,im appreciating how he did it 1pass only....wow amazing

@noeltahal3667 5 жыл бұрын

love that beautiful weld

@kipi593 7 жыл бұрын

2mm seinämää kun treenannut 2mm ilmaraolla niin 2mm elgan puikolla tuntuu että vaatii virtaa niin paljon palaakseen hyvin että ollaan reiän palamisen lähellä kokoajan.kokeilin esabin 1.6mm 63.20 puikkoa ja oli kuin lasten leikkiä verrattuna elgan 2mm.paloi paljon tasaisemmin pienillä virroilla.elgan puikot taisivat olla myös kosteita 2h vaan kuivaimessa.

@user-jg7so4pm3x 6 жыл бұрын

Good job!

@raykim1812 10 жыл бұрын

Thanks for your video..Good job !!!

@attisk1779 10 жыл бұрын

Thanks for watching.

@roberternest2402 6 жыл бұрын

Very good welding. I've never used stainless stick welding with my powerarc welder. They must be pretty expensive.

@shahdostwelder2117 2 жыл бұрын

Watch my videos

@HardKnocks160s 7 жыл бұрын

very nice man I have 200a tig/mma inverter IMA give it a try looks like it l work for my turbo downpipe

@dexter2433 5 жыл бұрын

very nice short arc weld

@AlexAndreiZAR 6 жыл бұрын

I am below rookie level welder... my wish is to weld like that some day :)

@tiejdzsi6224 3 жыл бұрын

Practice everyday and after a month you'll be on a higher level 😎

@SEXYTECH1000 2 жыл бұрын

WOW BEAUTIFUL WELD JOB, LOOKS LIKE A ROBOT WELD,

@deitrickknatt8933 4 жыл бұрын

I wish I could get mine to come out like that!

@councilv1250 6 жыл бұрын

Hello, any chance you could list your settings and electrode size? I have to pass this same test for my welding school

@user-yz1vt6zv7n 4 жыл бұрын

if it is a welding school they should provide you a WPS.

@MrS22222 6 жыл бұрын

bruh, I'd be psyched

@bimboaq 9 жыл бұрын

By the way, great weld!

@justinsummerlin1218 9 жыл бұрын

wow made it look easy nice.

@wikomarlo3969 7 жыл бұрын

nice video..thanks guys bygone upload

@MarcosPaulo-tv6uf 8 жыл бұрын

gostei muito da maneira que conduz o eletrodo, amperagem bem baixa... eu gostei.. alguem ai entende português?

@erlijuniorleal7764 4 жыл бұрын

Ele tava controlando a amperagen no pedal

@nunofontainhas3562 6 жыл бұрын

excellent job.!

@nathanjunor7884 9 жыл бұрын

Low amps and 2.5's seems to be the way forward.

@georgiojansen7758 9 жыл бұрын

If I use a remote control .I never know and don't care how many amps I use. It seems I use alot of amps, one time a kempi machine had blisters on the trafo from overheating.i miss the smell though inox fumes are hazardous.good work.

@joaquincampos3461 6 жыл бұрын

good video this is what I need thanks

@mrjodoe 6 жыл бұрын

i also tried 2mm pipe but i had problems. not enough current = no good penetration and no slag on the inside (bad for stainless) and too much current = have to move fast zigzag motion to prevent burning holes + only few centimeters welding possible because of heat building up too fast.

@johnw.peterson4311 8 жыл бұрын

Oops sorry it is the 6G position, and darn good welding!

@user-jk4lb3zp8v 9 жыл бұрын

А с какой толщины стенки свариваешь V разделкой кромок?К стати видео очень класное.Очень понравилось.Работал с ОК 61.30 почему стык синеет.Труба нержавеющая 12х18н10т 4мм стенка.Сваривал в два прохода.Заранее спасибо.

@mathieugirard7445 8 жыл бұрын

pretty nice.. i tried it but i m not sure about the preperation on that joint.. could you tell me more about it ..thank!

@attisk1779 8 жыл бұрын

+Mathieu Girard I use 2mm gap with I groove, what else do you need to know?

@jaimealanis6649 7 жыл бұрын

Attis k

@BigWesLawns 7 жыл бұрын

Attis K can you tell me the polarity allowed for these rods? AC\DC?

@michaeltrigueiro1504 3 жыл бұрын

Which electrode did you use?

@elmeromero1794 11 ай бұрын

When welding stainless to stainless use a 308 rod. When welding stainless to mild use 309 rod.

@1republikapilipinas 9 жыл бұрын

maayos ang pag hinang kapag hawak mo ang remote control

@grandpabill6684 7 жыл бұрын

Not bad for stainless stick application i personally would much rather TIG weld it !

@sakeraberaksi4067 4 жыл бұрын

good welding how much,ampere/volt...thank you

@thesniperofcs 9 жыл бұрын

Good job bro

@praveensatya9776 7 жыл бұрын

with uneven arc length ,,is that good

@joelviiankorpi4964 9 жыл бұрын

Jees. I know 😊 these are the best rods in the world. Elga have also good rods ...

@serikaybakirov489 5 жыл бұрын

Профессионал

@Mindyourbusiness122 4 жыл бұрын

Can see the rainbow 🌈 perfect weld

@antoncrowley2140 8 жыл бұрын

snyggt sätt att slippa pipen

@bimboaq 9 жыл бұрын

Hi! What electrode did you use? 7018? Or 7014? Also on how many amps did you start off? Thanks!

@attisk1779 9 жыл бұрын

Esab 63.20-316L I started from 10 amps and then rise it up, dont know really what amps I had when I welded it, probably somewhere around 25 to 35 amps, then turn it down to 10 amps again when I stopped welding. 7018 and 7014 are made for black steel.

@thomaskoshinsky7768 Жыл бұрын

y such a close arch.

@butters_ 6 жыл бұрын

I don't get it, 6g is 4mm.. but in the description you say pipe is 2mm, which it does look like. surely the isnt 4mm?

@atkinssgaming2179 6 жыл бұрын

i would like to know if its possible to not burn the stainless while stick welding. I fill my pipe with tig and have no discoloration. Then I cap with stick and it blackens like your pipe as well. Is it possible to keep that from happening?

@jhon-os3sz 8 жыл бұрын

root,fill & cap with 1 pass...this pipe for???

@BigWesLawns 7 жыл бұрын

Peroz Jhon its clearly a practice piece. we arent at work... chill

@joelviiankorpi4964 9 жыл бұрын

You have Kemppi welder 😊 Finnish quality ....

@attisk1779 9 жыл бұрын

Joel Viiankorpi

@saint85 10 жыл бұрын

awesome

@avianaviator1570 4 жыл бұрын

Do you think I can do this with my buzz box? Haha

@setsolda8107 7 жыл бұрын

what kind of lens are you using to film, is it good to put on the solder mask?

@gypsylou77 8 жыл бұрын

what grade of Stainless Steel? And I noticed you adjust your amperage as your welding? What amp you start & where about's?

@nathanjunor7884 9 жыл бұрын

can you advise on how to set up control for MMA welding.

@user-xh4ki3hm7m 7 жыл бұрын

что за электроды такие?

@mathieugirard7445 8 жыл бұрын

what kind of rod,? diameter and number,and i figure 27,32 amp? thank

@ngonar88 3 жыл бұрын

Helo boss nak tanya SS rood 2.6 welding paiping api brapa paling cantik? Terima kasi sifu

@bradwester3341 9 жыл бұрын

Now try that with a V groove with about 2 inches of room underneath the pipe to weld.

@SeanWhite03 9 жыл бұрын

just burn the rod down. easy.

@bradwester3341 9 жыл бұрын

Only uphill buddy. Amateur

@SeanWhite03 9 жыл бұрын

yeah, im the amateur haha...

@attisk1779 9 жыл бұрын

Sean White Can do it both ways. This is just the way how we usually weld stainless stick test´s

@user-vy9ri2dj8x 2 жыл бұрын

Wow... good

@chukkabhaskar5001 3 жыл бұрын

Nice

@lloyddotimas6302 8 жыл бұрын

You got pulse and high frequency start?

@davehughes2424 2 жыл бұрын

Are you using a lot of arc force?

@attisk1779 2 жыл бұрын

I can`t remember it and I don´t care about it. It is what it is. When you do this for years you can see how the puddle runs and now how to control it, I cannot tell it better

@yadavbabu6782 4 жыл бұрын

Nyc joob

@noeltahal3667 5 жыл бұрын

i did not see what u clean the flux with was good

@workernori 3 жыл бұрын

I’ve been welding stainless handrail for a few weeks now with 3/32 316L at about 75 amps, gotta say it is a pain in the ass! Hard to see the puddle with all the slag that it produces. Any tips??

@rl2769 Жыл бұрын

Turn ya heat down. 75 is too high.

@willyjilly9684 6 жыл бұрын

Any recommendations for someone looking into buying a stick welder for stainless and aluminum repairs for small jobs? Not sure what Arc welder to purchase for occasional use?

@ELGuapo794 6 жыл бұрын

Kemppi minarc evo 180.

@4yp6aH8 7 жыл бұрын

was the rod 1.6 or 2.0?

@RanjitSingh-dl1wi 5 жыл бұрын

This kind of welding required E308_l electrode

@ivanlopezlopezvargassilva2595 2 жыл бұрын

De cuantos amperajes usa

@dttommy8052 6 жыл бұрын

What stick and amp did you use?

@tomirautiainen3864 7 жыл бұрын

At 2:49. U can seen that this is not 2mm.. Even ends of the tubes may have burr. Looks like 2.9mm. But anyway.. It is hardest job to stickwelder to master 2mm stainless.. Not if only reguiments are that u can make it leakproof.. but when u have to weld it in EN ISO 5817 class B. And its easiest in test. But in field its different u may not have space to go around with right hand.. may need left hand.. u may be standin on ladder when welding or might need mirror.. or maybe 4mm gap.. 2mm stainless in stickwelding is what separates best from good..

@rl2769 Жыл бұрын

Agreed.

@elgecske 9 жыл бұрын

we use the 1.6 esab ok 6320. Du you recut the gap as you go on welding? Couldnt se any grinding here.

@attisk1779 9 жыл бұрын

Yes I grind it, just didnt want to film it. I used 63.20 also, 2mm electrode.

@damienbrothwood5702 Жыл бұрын

Is that schedule 10

@treeroofgrass 9 жыл бұрын

nice!

@Powerlifter666 9 жыл бұрын

Aspect look nice penetration look also Ok well done :-) would be ok in most of the maintenance and pipe work who doesnt required Xray control :-)

@attisk1779 9 жыл бұрын

It passes x-ray, no problem. It's common thing here to weld this kind of stainless pipe with stick.

@magnusklahr8190 9 жыл бұрын

Its nice to see a skilled stickwelder! Exray quallity has nothing to do with welding proces, only the skill of the welder. This Guy is probably from Finland, the welding people!:)

@Popshockercrx 10 жыл бұрын

So you single pass the weld, would that pass any test or visual test if you did it like that in the field for a pipeline?

@attisk1779 10 жыл бұрын

Yes it would pass. If this was on a field I would have grinded my re starts flatter.

@Popshockercrx 10 жыл бұрын

How much pressure do you think it would hold? And how does the xrays look on it? Thats preety easy to do it all in one pass root hot pass fill and cap. I figured alot of trash would be in it slag porosity pin holes ect... I wouldn't be comfortable doing it one pass but if you do it and its up to code you can bump production up

@blunderinghooligan 8 жыл бұрын

+Rosalio Morales the pipe is only 2mm thick, it only needs one pass.

@rl2769 Жыл бұрын

@@Popshockercrx how many passes can a man make on 2mm thick material?

@ianluigilastra1850 6 жыл бұрын

How to do that??

@mohamedhosni5226 5 жыл бұрын

We need 6010 root pas for 6G welding please

@antoncrowley2140 8 жыл бұрын

Minus pol?

@najamuhajirnaja8613 7 жыл бұрын

you rod stanless. mm??wyh?

@tdaz928 5 жыл бұрын

Is there an electrode type that is stainless after welding and can be used in food industry?

@mrjodoe 4 жыл бұрын

maybe something like 1.4430 or 1.4332

@zhr4121 5 жыл бұрын

ac or dc welding??

@gennadii595 6 жыл бұрын

что за электроды?

@ivanpower66 10 жыл бұрын

Do u usually stick weld your stainless pipe or tig it?

@attisk1779 10 жыл бұрын

If I can decide I stick weld it, becouse I dont have to worrie about gasses and so on. But when I am working I have to do as the code tells me. Most of the time I am stick welding stainless, it also depents what kind of a factory I am working, papermills usually want us to use stick and heat plants and oil factories want tig welding.

@cortsu73 9 жыл бұрын

Helepon näköstä kun se osaa! Kerros vähän ''niksejä'' kuin tuo 2mm seinämä rosteri putki hitsataan 45asteen kulumasa. hankaluuksia alhaalta lähtiessä kello 9 ja 3 asentoon. Pitääkö puikko pitää sulassa kiinni ja välillä nostaa että tulee valokaarta vai? Ja mulla lähtee kuona välillä sulan eteen menemään, mistä tämä johtuu ? Paljonko sulla on ilmarako? ja onnistuuko yhtä helposti elgan 316LP -puikolla?

@scottcarr3264 8 жыл бұрын

I can see he "got it done" it looks a bit cold at the early part, maybe a couple more amps would have helped. I still would have Tig welded it myself. I've never had a lot of luck welding with 1.6mm rods, very difficult to keep a consistent arc.