CFM LEAP 1A break down
Рет қаралды 24,551
Күн бұрынCFM LEAP 1A break down … this is a long video but lots of information there. I apologize I couldn’t get the other side of the engine open, but I hope the images will get the point across.
Thank you all for being here and watch and supporting.. I’ll keep doing what I do and I want you to keep learning. Cheers 🤙 till next time.
#stigaviation #cfm #cfmengine #cfmleap #cfmleap1a #safron #geaviation #breakdown #components #aircraft #aircraftengineers #aircraftmaintenace #wefixyoufly #themoreyouknow #learningeveryday #instagram #youtube #jetengine #airbus #airbus321 #aircraftmaintenance #themoreyouknow #boeing #aviation #airbus #aircraftmechanic #howitsmade #jetengine #learningeveryday #learnonyoutube
@I7470 11 ай бұрын
Please do elaborate videos to explain it all properly. Don't worry about videos being too long. We are happy to learn. Thanks a lot.
@StigAviation 11 ай бұрын
I will try my best
@RobtheAviator 11 ай бұрын
You are doing a great job
@nolanono2532 11 ай бұрын
@@StigAviation Yess if you have the time I would love a long form video
@sprinklersolutions3247 11 ай бұрын
Absolutely love your videos! Keep them coming please!! Awesome job!
@StigAviation 11 ай бұрын
More to come!
@AvStevieStevenJamesDrums 11 ай бұрын
I so look forward to your posts. Being an AvGeek for nearly 50 years, you show us jealous folks the internals that most people don’t get to see. Thank you so much. My parents worked for the airline 70’s thru mid 90’s. I was 6 for my very first plane ride in a 707. Cheers
@StigAviation 11 ай бұрын
Right on! keep the aviation love alive my friend its a beautiful feeling
@MDSsp251 11 ай бұрын
Not too long that your videos would be used as training material. Very impressive!
@StigAviation 11 ай бұрын
Wow, thanks! That's incredibly kind of you
@s0nnyburnett 11 ай бұрын
Love this, quick, simple and concise explanations.
@StigAviation 11 ай бұрын
Glad you like it!
@WEAREDERBY1884 11 ай бұрын
Never worry about your videos being to long its impossible your content is in my eyes perfect for the circumstances with you being on the clock keep up your Fantastic content sir 👍
@StigAviation 11 ай бұрын
Awesome! Thank you!
@JAMESWUERTELE 11 ай бұрын
This is fantastic! I run a CF6 derivative on the ground for power generation. Keep making videos!
@StigAviation 11 ай бұрын
CF6 Is a workhorse for sure. Thank you 👍
@DaltonFTT 11 ай бұрын
I have a job interview coming up with GE, hopefully I’ll be building these soon 🤞
@StigAviation 11 ай бұрын
Hope you get the job you'll be building what i fix Awesome
@voytekcyvr1936 9 ай бұрын
I could listen for hours. Thanks to you we can see the technology which get us flying and flying safe. Thanks for all your content!!
@StigAviation 9 ай бұрын
Thank you for being here and enjoying it. I appreciate you
@biggdogg285 11 ай бұрын
Excellent, thumbs up as always.
@StigAviation 11 ай бұрын
Thank you! Cheers!
@RTD1947 3 ай бұрын
outstanding Knowledge...very impressive
@StigAviation 3 ай бұрын
So nice of you. Thank you for watching
@Defcon666 11 ай бұрын
So many cool things ..I'm ready to start taking things apart.
@StigAviation 11 ай бұрын
Lets go !!!
@MrFalconp1 9 ай бұрын
I think my brain just P.O.P.P.E.D.... Another great one Sig
@StigAviation 9 ай бұрын
It’s a lot of information.. but it’s very interesting stuff. Thank you
@chrisnicholls8636 11 ай бұрын
Always like CFM engines since the CFM 56 appeared on the 737-300. Great video Stig makes me wished id gone into Aircraft engineering here in the UK
@StigAviation 11 ай бұрын
CFM makes an amazing product , i enjoy it very much
@kraz904 6 ай бұрын
Truly a modern day masterpiece. It’s also great to look at or work on a brand new engine versus a high time one. So clean you can eat off it…
@StigAviation 6 ай бұрын
It’s definitely a pleasure to work on newer engines, makes life a lot easier. These are very beautifully designed.
@user-ei2of4xy3e 11 ай бұрын
Спасибо Вам за вашу работу и за ведение канала на Ютьюб🤝! Мне, как любителю авиатехники (особенно авиадвигателей) - очень познавательно и интересно 👍!
@StigAviation 10 ай бұрын
Thank you so much for being here and watching
@user-ei2of4xy3e 10 ай бұрын
@@StigAviation Спасибо, Стиг🤝! Я - Ваш подписчик, поэтому слежу за Вами и за вашей работой, которую Вы снимаете для своего канала и соответственно за работой - которую Вы делаете, при обслуживании самого прекрасного, что смогли сделать ум и руки человека: самолётов 👍! Надеюсь, что гугл-переводчик - сможет перевести мои самые тёплые пожелания с русского на английский. 😁
@man_from_dreams 9 ай бұрын
@@user-ei2of4xy3eТоже интересен этот канал👍🏻 Привет из России)
@ricardocorbie6803 6 ай бұрын
Until I found u, I had a preference for Boeing aircraft,, but now I find ,, because of your knowledge and expertise I prefer Airbus,, seems as if they put many more options onto their products,, like those brake cooling fans!! Thanks Sir!! Love your content!!❤️
@StigAviation 6 ай бұрын
It’s definitely a different architecture when it comes to Airbus, a lot more mechanics friendly and user-friendly. But I enjoy working on both manufacturers.
@21lt 7 ай бұрын
That was awesome! It was the most comprehensive jet engine video I’ve ever seen. Keep the videos coming 🤟
@StigAviation 7 ай бұрын
Thank you very much. I’m glad you enjoyed it
@joseray100 5 ай бұрын
Wow, I didn’t realize how incredible that is so many many parts of a jet engine that explains why jet engines are very extremely extremely complicated system, especially all the parts it’s incredibly amazing machine
@StigAviation 5 ай бұрын
It’s just incredible engineering
@martinross5521 11 ай бұрын
Great video, Stig - your knowledge is amazing and love your style for passing it on.
@StigAviation 11 ай бұрын
My pleasure! and thank you for being here.
@andrescastaneda8833 7 ай бұрын
💪 Thanks Stig!!!
@StigAviation 7 ай бұрын
My pleasure 👍
@ginolatino91 11 ай бұрын
Wonderful and very explicative... Thank you!! Greetings from Roma
@StigAviation 11 ай бұрын
Glad you enjoyed it! Greetings from LAX
@hugostiglitz47 11 ай бұрын
Your videos are fantastic. Love your content!
@StigAviation 11 ай бұрын
Thanks so much!
@NovejSpeed3 11 ай бұрын
Can you please explain why the LEAPs on thr MAX need so long to start while the NEOs don't. I understand about the bowed shafts and thermal expansion I just don't understand why one has the problem and the other doesn't. Great video!!! Loved the test run at the end!!!
@StigAviation 11 ай бұрын
Good question! and you kind of answered it yourself, the shaft bowing is the reason, the LEAP 1B has a bit of different configuration when it comes to the Compressor staging. Both engine do take a while ( especially on the first start of the day)
@njjeff201 4 ай бұрын
Kool stuff!!!!! TY ✈️
@StigAviation 4 ай бұрын
🤙
@adolforuiz3723 11 ай бұрын
Excelente Master clas 🎉
@StigAviation 11 ай бұрын
thank you
@miajoe4259 11 ай бұрын
Try landscape mode on videos, great info from an retired aa mia cargo empolyee
@StigAviation 11 ай бұрын
Will do, at the moment I'm just doing video from my phone so its hard to transition , im catering more to the mobile user. i need to get a go pro
@SSaugaCriss 11 ай бұрын
I prefer this format as it presents almost full screen on YT mobile.
@completemoney 11 ай бұрын
Ahhhhh so the ppc is connected to the rgb and has a sister component tcb that’s on top of the rotc bda that gives fuel to the jpm while giving the fdt power. Makes sense now. Jk absolutely love all of your videos. They’ve answered a ton of curious questions I’ve always wondered about. Please keep up these great videos and spewing knowledge. 99% of KZfaq videos are brain eating junk. Your the 1% that actually contributes to society.
@StigAviation 11 ай бұрын
Thank you Very much, i appreciate you being here
@AS-ww3fe 8 ай бұрын
Wmazing
@StigAviation 8 ай бұрын
👍
@XFlight69 11 ай бұрын
Huge fan of your channel man have really learned a lot from you. Would you be able to do any videos on the maintenance pages in the A320 series MCDU ?
@StigAviation 11 ай бұрын
i will work on that and get something out for you
@mrsim9095 11 ай бұрын
Good stuff! Also AME here, doing heavy on A220
@StigAviation 11 ай бұрын
Nice! but i feel bad for you and the PW issues
@mrsim9095 11 ай бұрын
@@StigAviation Dont feel bad for me, Im not paying! With all the issues my job is safe 😅 But ya, the pw issues is not fun, we had to park few planes out of c check to give engines to the line
@SSaugaCriss 11 ай бұрын
what are the issues if not confidential ? the only issue I know of with the 220 is they do not depart in moderate turbulence although that may not be engine related.
@BigEightiesNewWave 6 ай бұрын
I prefer this over the PW GTF engines. I read the report on their ground-testing engine failures. I prefer no planetary gears on my turbo-fan-jet engine.
@StigAviation 6 ай бұрын
PW is definitely having issues with that power plant. I hope it gets resolved
@MyWifeHateCod13 11 ай бұрын
Subscried !!
@StigAviation 11 ай бұрын
thank you so much
@jeffnew1213 11 ай бұрын
Very well done video. Fascinating engine. Question: Can the fan on an engine at standstill be prevented from rotating if the fan was held in place by hand?
@StigAviation 11 ай бұрын
in theory Yes it can, because it gathers momentum to spin up, but i have never done that
@BigEightiesNewWave 6 ай бұрын
The best of France and America married to produce best engine. Safran+GE
@StigAviation 6 ай бұрын
+CFM 👌. I agree. A very good combination
@kylegordon 11 ай бұрын
Fascinating stuff. The tip clearance control, what range of circumference expansion is the engine having to deal with? mm? a cm or two?
@StigAviation 11 ай бұрын
MM very tight tolerances
@pmbuthia4210 11 ай бұрын
Thanks for another informative video. Nice to see the highly praised CMF Lp1. I have a kinda stupid question. When a pilot decides to dump fuel. Is it via the wings or the engine have a release valve?😅😅😅😅
@StigAviation 11 ай бұрын
Good question! It depends on the aircraft, some aircraft dont have the capability do Jettison fuel ( A321 cant) But for example the 777 can dump fuel , it will be selected from the flight deck on how much to dump and the fuel will drain from the wing tips jettison tubes.
@ashrafshadid5870 11 ай бұрын
Excellent videos could you make videos for engine troubleshooting please
@StigAviation 11 ай бұрын
Well that’s a very specific thing you are asking for. What part of the engine. There’s thousands of Troubleshooting procedures for just the engine.
@ashrafshadid5870 11 ай бұрын
I mean any troubleshooting you face at work you can record it and then we can learn how you resolve it.
@StigAviation 11 ай бұрын
@@ashrafshadid5870 I simply follow my troubleshooting manuals. It’s all written step by step.
@chrnc 11 ай бұрын
RightOn
@StigAviation 11 ай бұрын
thank you
@kennyvincentngodo7788 11 ай бұрын
Wow! You're so intelligent. We appreciate your work! Have you ever tried or thought about flying any of those birds? 😊
@StigAviation 11 ай бұрын
i'm far from intelligent,, after 25 years of fixing i'm still learning everyday, as for flying... i tried it, it's not for me... i enjoy fixing more
@gregsmith3410 11 ай бұрын
Is it Safran's responsibility for the Low pressure system, and GE for the high pressure components ?
@StigAviation 11 ай бұрын
its a combination of efforts
@user-rp1it3oj9y 5 ай бұрын
Could you show where the pressurized air exits after driving the starter? Is it vented into the bypass stream, or is there any exhaust similar to the one for the engine anti-ice?
@StigAviation 5 ай бұрын
You mean from the starter ? Just gets dumped into the cowling and goes overboard
@edmanalo0218 11 ай бұрын
Hello brother! Just want to ask if the fan blades expands, i've been seeing signs of scratches on the acoustic panels on neos
@StigAviation 11 ай бұрын
Yes indeed they do. Blade expansion is a normal thing within Certain limits... if Blade begin to expand too much that's called Blade Creeping ... at that point it will start to cause damage to the abradable liner...blade would need to be replaced.
@sky173 11 ай бұрын
I really appreciate the content, but is it possible to hold the camera horizontally? I avoid TikToc for this reason, lol. Plus it'll make it a more enjoyable viewing experience having the ability to see more of the screen. Cheers and keep up the great content.
@StigAviation 11 ай бұрын
First of all thank you for being here, i appreciate you for that, as for the vertical format , its hard for me at the moment because i cater to the mobile user,, and i shoot mostly with my phone, but ill try my best to do a horizontal format.
@sky173 11 ай бұрын
@@StigAviation 🤗
@jamowie4866 3 ай бұрын
Can anyone explain the difference between the CFM leap and the CFM56? I know the leap has the composite blades, does it also use a FMU instead of a HMU like on the CFM56? Cant find a clear answer online
@StigAviation 3 ай бұрын
Well the leap 1A/1B is a very different design. It has advanced technology much like the GEnx. FMU and HMU work much the same in concept but how it does its job is different. Different compressor staging and well as advanced materials in leap engines.
@jamowie4866 3 ай бұрын
@@StigAviation that's amazing, thank you so much! Dont suppose you know where I could find any more information on the inner workings of the FMU? Keep up the great vids!
@StigAviation 3 ай бұрын
@@jamowie4866 www.researchgate.net/figure/Schematic-of-FMU-and-flow-rate-servo-control-valve-of-fuel-control-system_fig1_336391625 Try that for starting.
@jamowie4866 3 ай бұрын
@@StigAviation legend! Thanks man, much appreciated!
@kraz904 6 ай бұрын
A lot different than the JT8D’s from yesterday and no stands to crawl on…
@StigAviation 6 ай бұрын
And a whole lot quieter too
@karldoot2421 11 ай бұрын
Does the A220 have the same engine as A321?
@StigAviation 11 ай бұрын
The A220 is Powered by Pratt & Whitney PW1500G
@BsUJeTs 8 ай бұрын
Here’s an easy question for you and hard for others. What distinguishes one engine from another ?
@StigAviation 8 ай бұрын
😅 that’s a bit of a odd question, let me see if I can get this one right, I suppose the spinner and the pattern on it.
@BsUJeTs 8 ай бұрын
@@StigAviation the data plate. All the parts on the engine is replaceable except for the data plate.
@StigAviation 8 ай бұрын
@@BsUJeTs once again that was a very broad question. So hard to answer it. But yes. Data plate it the way to go
@Busdriver321 5 ай бұрын
You mentioned the EEC in your video. The 737 has that. Airbus engines have FADECs.
@StigAviation 5 ай бұрын
They both have the same thing, it’s just EEC is that physical box on the engine, FADEC is the system. The terms are interchangeable.
@gev340 10 ай бұрын
Wow ! Runup with engine cowl openned 😱 not allowed in case of engine fire !!!
@gev340 10 ай бұрын
But i want to tell you that all your videos are very nice. I m instructor and you hare a very pedaguog guy !
@StigAviation 10 ай бұрын
It’s actually is allowed only if you have fire extinguishers on site 👌. But otherwise it’s best to close cowling before running 👍
@StigAviation 10 ай бұрын
@@gev340 thank you very much sir. Much appreciated
@gev340 10 ай бұрын
@@StigAviation when i was young mechanic in the 90' we made the parce power on JT8 of the MD83 with open cowls and turning the rigging srew under the engine at idle. When i began in AirFrance it was not allowed for safety reason and specialy in CDG airport under EASA rules. I know you re true because we alway use to get a big ground fire extinguicher with us but for insurance policy it's a mistake under your responsability if a fire occure during runup cowl openned... Europe is strait with rules. Because there is a lot of money behind a plane. As you said about the prise of the leap.
@StigAviation 10 ай бұрын
@@gev340 ahhh the good old days of trimming the engine at idle when standing under it … I do miss those days. JT8D holds a special place in my heart. Probably the last good engine PW made in form of design for a low bypass system.
@jeffzimnisky7073 11 ай бұрын
Why 400 htz?
@StigAviation 11 ай бұрын
compact design if the generator
@vittoriobacchiega9118 11 ай бұрын
I believe more efficient the DC conversion with small capacitors little ripple.
@vittoriobacchiega9118 11 ай бұрын
How huge the part list of this motor?😂
@StigAviation 11 ай бұрын
thousands of parts, i just went over the major ones
@erict.35 4 ай бұрын
I don’t what he said
@StigAviation 4 ай бұрын
?
@erict.35 4 ай бұрын
@@StigAviation yes, I didn’t understand: 1. Where’s the APU. 2. How does the pressurized air start the engine 3. How exactly are the gearboxes connected 4. That valve is a regulator of what? …
@StigAviation 4 ай бұрын
@@erict.35 you should watch my other videos. I explain a lot of that in other videos
@erict.35 4 ай бұрын
@@StigAviation every engine has its dedicated APU?
@StigAviation 4 ай бұрын
I think you were confused on engine and APU, APU is an engine. It’s just an extra engine in the back to provide air and electrical power, it’s got nothing to do with the main engines.
@user-im8xl1xy2b 11 ай бұрын
Ai Filé dicas cênçacional de cada conponénte pneumateco e hidrallico e élêtricos e émjêtoris trabalho maravilhoso e Cênçacional amigo😀muito bom e Cênçacional👍🏻👏🏻👏🏻🤝🏻✍🏻
@StigAviation 11 ай бұрын
Glad you enjoyed it
Mentour Now!
Рет қаралды 3,9 МЛН
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Long Haul by Simple Flying
Рет қаралды 31 М.
Stig Aviation
Рет қаралды 25 М.
Aman Soni Official
Рет қаралды 7 МЛН
Immersed
Рет қаралды 6 МЛН