STM32F103C with ST-Link and STM32duino, simplified!

Рет қаралды 61,122

4 жыл бұрын

In this video I show you how to install all the drivers for the STM32-based microcontroller in order to be able to use it with Arduino IDE.
After installing the drivers, and uploading the bootloader to the STM32 microcontroller, you have to add the additional boards manager to the Arduino IDE. After that you have to pick your board (in this video, it is the STM32F103C) and select the STM32duino bootloader as the upload method. Connect the board to your PC by the MicroUSB port (remove the ST-Link if you haven't done it yet) and upload your software of choice.
Resources:
ST Drivers and Utility:
www.st.com/en/development-too...
www.st.com/en/development-too...
Arduino STM32 files (Drivers and Bootloader):
github.com/rogerclarkmelbourn...
github.com/rogerclarkmelbourn...
Additional Boards Manager URL:
dan.drown.org/stm32duino/packa...
STM32duino files:
github.com/stm32duino
If you found this video useful, please subscribe!
If you want to buy the parts I used and support me at the same time, please use my affiliate links:
curiousscientist.tech/tools

Пікірлер: 234

@jamesrodemeyer7544 3 жыл бұрын

I have been working on this for 6 hours, but now I must eat and go to bed...hope I don't forget where I am at. Thank you, your help has been the easiest to follow on this subject and all your links are good. Thanks from a 74 year kid.

@jamesrodemeyer7544 3 жыл бұрын

Sir, I must thank you again. It all worked thanks to you and your tutorial. This is the 3rd try to program this board, but you provided "All" the correct links with all the correct information. If I could follow this and get it to work I think anybody could, again, thanks.

@muhammadfaisal-ko3bn

Thank you sir, finally i can use com ports and read signal from stm32 board in my pc, thank you for sharing your knowledge! Kudos!

@udithaganepola3080 Жыл бұрын

GREAT TUTORIAL..well explained...thank you..i upload the arduino bootloader to my stm32f103 without any trouble....thanks again

@ef8202 2 жыл бұрын

i have to say thank you, this is a great tutorial and it did help me a lot, this kind of actions makes common knowledge progress further, thank you!

@majinkeyboards 3 жыл бұрын

Just subscribed, thank you, you are awesome.

@FatihKaplan 3 жыл бұрын

Great tutorial. Thank you :)

@paranoidcomet Жыл бұрын

This worked, thank you so much!

@douglasflorescopetti4720 3 жыл бұрын

Nice video, this help-me a lot

@paulpease1788 4 жыл бұрын

Here is another that people seem to keep looking at. Go this direction. Peltiers are my thing but it doesn't seem to be the hot topics lately. Make a buck or two when you do all this work.

@zulfamaulana877 2 жыл бұрын

thankyou sir, its work very well

@bahmanniknam1856 Жыл бұрын

very useful video . thanks

@mohssinebouchmal8694

انه من افضل واجمل الفديوهات التي شاهدتها . شرح سلس ومفيد ومركز . شكرا لك كثيرا .. لدي بعض الاقتراحات سوف اطرحها ان تم الرد على تعليقي . شكرا لك على الفديو والشرح ❤❤❤❤

@ahmetaksoy2502 3 жыл бұрын

you are perfect

@bennguyen1313 4 жыл бұрын

Not sure how difficult, but I'd like to port the STM32duino-bootloader to an stm32h7.. do you know if it uses usb's CDC class or HID class? According to the USB Composite Library for Roger's Melbourne's STM32F1 seems to support many classes.. HID, Mass-Storage, etc, but not exactly sure if it's HID for bootloading!