Stock Stabs Sucks! Replacing my KBD67lite stabilizers with Durock V2s (Holee mod)!

Рет қаралды 72,260

Күн бұрын

This is a video about Durock v2 and C3 Equalz Stabilizers Soulmate kit!
C3 Equalz Stabilizers Soulmate kit:
swagkeys.com/collections/stab...
Music:
Startup - Auxjack
I Dream of Purple Unicorns - Christoffer Moe Ditlevsen
Nosso Choro - El Equipo Del Norte
Mic:
Sure Mv7

Пікірлер: 34

@tanukey2339 2 жыл бұрын

It's Fushigidane, not Fushigitane. Sorry about that!

@blackstars3720 2 жыл бұрын

How you like these vs the stock stabs?

@Rukkiiaa_YT 2 жыл бұрын

might pick these up to try for future build thanks !

@SagaSynthetics Жыл бұрын

This board is the sound I want! 😮😮

@james_tiberius_kirk73 6 ай бұрын

So I bought this Kit on Amazon. There's nowhere near enough Stabs (etc) to complete even an ASUS Azoth. What am I missing? Do I have to buy *multiples* of this Kit to do a full keyboard?

@bennysaa 2 жыл бұрын

Sounds so perfect. I‘m melting🫠

@kevinliu7366 2 жыл бұрын

I have a question. Does your plate mount a little higher because the stabs are screw in?

@tanukey2339 2 жыл бұрын

No it doesn’t.

@IkEisawesome7 Жыл бұрын

I have used these for about a year now. Now when I press my spacebar it doesnt go up all the way. The switch is fine, the stabs are fine. They just seem to pull the space bar down. It's always been a little muddy but now it's stuggling to be used. I don't know why

@theblocky2949 11 ай бұрын

Take out the stabs , clean the pads under stabs with alcohol pads and wipe away and excess lube on the stabs and put back and you r good😊

@vert3387 Жыл бұрын

Hey I have a question my space bar stab is inserted the opposite way as it won’t fit the way u did in the video , will that affect anything ? Like the bar is making a “U shape” if that makes sense , like this |_|

@asher217ify 5 ай бұрын

your space bar will be upside down

@borja6551 2 жыл бұрын

where did you buy the durock v2?

@gabxln Жыл бұрын

Aliexpress

@chocken4867 Жыл бұрын

what is your method of wire balancing?

@theblocky2949 11 ай бұрын

Place wire on glass and hold one side with finger and tap the other side . After put the slightly bent side on the edge of your desk and bend . Do the tapping but again and test if it's better 😊

@myulky 2 жыл бұрын

why's the volume so low RIGHT at the sound test...

@sawyercolegaming8328 Жыл бұрын

The kbd67 lites stabs are actually rlly good tho

@ericwu8956 Жыл бұрын

Yes, they’re better than the cheap ones that come with your average prebuilt keyboard, but they’re ass compared to other screw in stabilizers pretty much.

@brzrk2605 Жыл бұрын

How do i tune my rods?

@asher217ify 5 ай бұрын

Like he did in the video.. did you even watch

@BenedictTanShanWen 2 жыл бұрын

Sus title. The stabs the 67lite came with are at least as good as my durock V2s if not smoother.

@tonchok9488 2 жыл бұрын

Which round r2? R1 came with cherry screw ins while r2 came with kbdfans screw ins

@BenedictTanShanWen 2 жыл бұрын

@@tonchok9488 R2.

@tonchok9488 2 жыл бұрын

@@BenedictTanShanWen ah then those are pretty good if not better than durock 2s i think this vid he had r1 but tbh idk

@BenedictTanShanWen 2 жыл бұрын

@@tonchok9488 It's a V3 PCB in October. So it can only be R2.

@tonchok9488 2 жыл бұрын

@@BenedictTanShanWen ah i c then idk cuz i haven't seen mine in a while sold lol

@JJ26071503 2 жыл бұрын

You bought the soulmate kit which comes with holee/epsi mod materials then you proceeded to use bandaid for your holee modding? Lol

@tanukey2339 2 жыл бұрын

Because the bandaid removes the ticking more than the teflon tape that came with the kit. Lol

@JJ26071503 2 жыл бұрын

@@tanukey2339 oh alright haha

@randalldesignd9857 2 жыл бұрын

i love it!

@RambleStorm 2 жыл бұрын

A stock vs durock comparison would've been nice...

@catscc122 Жыл бұрын

Kinda greedy

@jamie8859gjbasdjkfgbnadfjklgh Жыл бұрын

@@catscc122 yeah, seems outside the scope of this video