Stoeger M3000 How To Disassemble And Reassemble

Рет қаралды 53,791

The Great American Outdoorsmen

Жыл бұрын

How to disassemble and reassemble the Stoeger M3000 shotgun.

Пікірлер: 70

@R_K_S2401 4 ай бұрын

Thank you so much for the tutorial. I love how you got straight to the point with no distracting music. I recently purchased a Stoeger m3000 tactical model. And I couldn't figure out how to disassemble the bolt. Thank you again

@TheGreatAmericanOutdoorsmen 4 ай бұрын

You’re welcome, thanks for the feedback!

@jmichaelson6497 26 күн бұрын

Great video thank you! Disassembled and reassembled with no problems. Just a tip for Stoeger M3000 owners - buy a Benelli M2 extractor and spring kit and install it. It’s an easy upgrade and the OEM one sucks. May save you some trouble down the line

@TheGreatAmericanOutdoorsmen 26 күн бұрын

Glad to hear it! Thanks for the feedback.

@toddmathis7484 8 ай бұрын

Great explanation. No fluff, BS, or annoying background music. Thanks!

@TheGreatAmericanOutdoorsmen 8 ай бұрын

Welcome! Thanks for the feedback.

@user-cp3tz7qw2b 10 ай бұрын

Dude, this video was damn good. Great job. Saving it so when I clean my gun, it will make it easier for me to do this. Thanks.

@TheGreatAmericanOutdoorsmen 10 ай бұрын

You’re welcome! Glad ya like it.

@dickrother7450 Ай бұрын

Very nice job explaining

@TheGreatAmericanOutdoorsmen Ай бұрын

Thanks for the feedback 🙏

@donaldmerseal1713 10 ай бұрын

Did a great job on explaining how to disassemble and reassemble

@TheGreatAmericanOutdoorsmen 10 ай бұрын

Thanks!

@marvincw Жыл бұрын

Great video! Saved to my favorites for when I disassemble mine for cleaning!

@TheGreatAmericanOutdoorsmen Жыл бұрын

Thank you!

@greasyweezel9540 11 ай бұрын

clear and concise - well done - thanks

@TheGreatAmericanOutdoorsmen 10 ай бұрын

You’re welcome!

@HLLOZZ Жыл бұрын

Great video mate. Thank you so much.

@TheGreatAmericanOutdoorsmen Жыл бұрын

You’re welcome, glad you enjoyed it!

@HeyNorm 8 ай бұрын

Very informative. Thank you very much !

@TheGreatAmericanOutdoorsmen 8 ай бұрын

You’re welcome.

@frankterranova4511 6 ай бұрын

Thanks good lesson

@TheGreatAmericanOutdoorsmen 4 ай бұрын

You’re welcome!

@MINIHAHA1 9 ай бұрын

Nice video on how to. Hey will this shotgun take a rob roberts Beretta mobile choke?

@TheGreatAmericanOutdoorsmen 9 ай бұрын

Never used a Beretta choke but if it’s the same as the Benelli chokes, my guess would be yes.

@BoardRideBum 9 ай бұрын

Broke it down and out it back together. I can hear Alittle movement in my fireing pin assembly after i put it back together. Have had this gun for 2 years and tons of shells have been used. Is this rocking noise inside a normal thing over time ?

@TheGreatAmericanOutdoorsmen 9 ай бұрын

Yes, it’s probably the inertia spring moving inside the bolt. Mine does the same thing when I rotate the gun up and down.

@meady888 Жыл бұрын

Hey great video thanks very much for posting. How long is the inertia spring from end to end any chance I could get some measurements off you. Anyway thanks for posting also great content on the channel

@TheGreatAmericanOutdoorsmen Жыл бұрын

Thanks! The inertia spring on the Stoeger M3000 is exactly 1 inch long.

@meady888 Жыл бұрын

Thanks very much for your reply 👍🏻

@kevinbiggun2969 Жыл бұрын

is there a evil spring in the magazine tube?

@TheGreatAmericanOutdoorsmen Жыл бұрын

There is a magazine spring. I’m unfamiliar with the term evil spring though.

@masonhartman1624 9 ай бұрын

I just got this exact gun when I got it the bolt fell out now when the gun is put together it only slides about halfway I don’t know how to fix it also the bolt release makes a clicking noise but does nothing. Do you have any idea what it could be?

@TheGreatAmericanOutdoorsmen 9 ай бұрын

If the bolt fell out, it sounds like the bolt retaining pin is either damaged or maybe missing?

@WERLOSTTravel 5 ай бұрын

Thank you

@TheGreatAmericanOutdoorsmen 5 ай бұрын

You’re welcome!

@mikeyabatangelo9418 5 ай бұрын

I just bought my M3000 with bronze cerakote and when going to remove the forehand and barrel from the receiver, I can pull it roughly 1 inch until it just stops and is extremely difficult to move. I have managed to get it apart but feels almost forced. Same with when u go to assemble. I get to the point where the barrel meets the receiver about 1 inch away and it’s almost impossible to move. Any ideas on why?

@TheGreatAmericanOutdoorsmen 5 ай бұрын

Make sure you are pulling the action back a bit when seating and unseating the barrel. Otherwise, it’s possible that the cerakote may have thrown the margins off and made it too tight. This happened with an AR that I owned and I could barely get the gas block off.

@olegig5166 Жыл бұрын

You gave a great review on disassembling and assembling the 3000 so I assume you might be able to answer my question. Does the 3000 have a method for setting the cast or does it remain in the neutral position?

@TheGreatAmericanOutdoorsmen Жыл бұрын

The Stoeger M3000 comes with shims that you can install to adjust your cast and drop. If you bought a used one and they didn’t come with it, you can buy them separate on the Stoeger site.

@olegig5166 Жыл бұрын

@@TheGreatAmericanOutdoorsmen thanks, good to know. I looked at its OM at Stoeger's site and it showed no shims for cast, only for drop. But the big question I have is can it be set for neutral cast. I'm left handed while all my grandkids are righties. Most right handed guys who buy a gun don't pay attention to cast on or off because the gun either come with cast off for righties or neutral cast; however I'm assuming a guy like you giving a review has investigated all aspects of the shotgun. Benellis come with cast off for righties and include the shims to make it cast on; but Benelli offers no shims for neutral.

@calebharman8145 Жыл бұрын

When i go to pull the trigger to test after reassembly, my hammer is not striking my pin. Got anything for that?

@TheGreatAmericanOutdoorsmen Жыл бұрын

Well you can narrow it down by testing the bolt and firing pin. Make sure when you press the firing pin it pushes back out and make sure when you press the bolt it comes back out (5:50 of this video). If both of those are working it’s probably your trigger assembly. Once you know what the issue is, you can dive a little deeper into fixing it.

@mrfabulous137 10 ай бұрын

Thanks

@TheGreatAmericanOutdoorsmen 10 ай бұрын

You’re welcome

@jorgeacosta4175 10 ай бұрын

Followed the steps but magazine cap wont thread on with the plug but it will without it any ideas why?

@TheGreatAmericanOutdoorsmen 10 ай бұрын

Make sure the barrel is fully seated, otherwise the cap will not go back on. It might be off by just a little, even 1/4 in will throw it off.

@mickp1978 11 ай бұрын

Hey mate why don’t you cut down the orange mag tube plug so you can fit more rounds in your magazine?

@richardbartolo9187 11 ай бұрын

In most jurisdictions, you have to restrict magazine capacity for bird hunting (2+1). He may have left in the plug for that purpose.

@TheGreatAmericanOutdoorsmen 11 ай бұрын

Most states I hunt in have a 3 shell limit on shotguns.

@TheGreatAmericanOutdoorsmen 11 ай бұрын

Yep, I’ve been checked by a few game wardens in my time as well 😂

@mickp1978 11 ай бұрын

@@TheGreatAmericanOutdoorsmen really!? Wow I’m surprised at that in the US. I have 9 in mine legally out in the bush and I’m in Australia 🇦🇺 will have to mention that next time one of your country men has a go at our Australian gun laws 😉👍🏼

@TheGreatAmericanOutdoorsmen 11 ай бұрын

@mickp1978 no kidding, 9? That’s cool! Some states are better than others, that’s for sure. You got me curious about Australian gun laws now 😂

@ppmaine Ай бұрын

The bolt looks like it is partially open after reassembly. Is this normal ?

@TheGreatAmericanOutdoorsmen Ай бұрын

As long as the function check is good, you should be solid.

@kostenceli35tabancatufek 10 ай бұрын

When we remove the pin holding the mechanism swivel head shaft of your rifle, can you replace it with the same frequency?

@TheGreatAmericanOutdoorsmen 10 ай бұрын

I’m honestly not sure about that one.

@dewaynereynolds8228 7 ай бұрын

I own one just like this one

@TheGreatAmericanOutdoorsmen 7 ай бұрын

Great guns!

@timlaycock4376 Жыл бұрын

Hey, when I purchased this Stoeger m3000 the under the magazine cap the orange plastic plug/rod was not installed. I've shot my gun without yhis installed as I didnt realize it needed to be in. It has performed fine. After watching this I realized thd orange plug should be in. I've installed thd plug but now my magazine cap does not screw on, it's as if the threads don't touch each other due to this orange rod/ plug being I there. Can anyone assist me with this. Tim

@TheGreatAmericanOutdoorsmen Жыл бұрын

Tim, I have encountered this issue on other models. 1st: twist the plug to make sure it’s fully seated and not catching on the spring or anything else. 2nd: make sure the fore grip is fully seated in the receiver otherwise it will stop your magazine cap from going on. 3rd: If those don’t work, cut a half inch off the end of the orange plug, sometimes they are too long. Hope this helps.

@gera2480 6 ай бұрын

I can't load more than 2 shells in a magazine and the problem seems to be in the rod. I've read online that the rod is there just to prevent you from loading more than 2 shells because of some bird hunting laws in some states. Can i just remove the rod so I can use it's full magazine capacity?

@TheGreatAmericanOutdoorsmen 6 ай бұрын

In most states you can’t hunt small game or birds without the rod in. That includes turkey. If you are just shooting clays, remove the rod. If you’re hunting, I’d say keep it in. Better than a fine from a game warden.

@gera2480 6 ай бұрын

Ok, thank you for the quick response. I am aware of the legal situation, but I was just wondering how to do it in case i ever need to. Thank you for the good video as well :)