Stoeger M3000 & M3500 Trigger Spring Kit - Stoeger M3500 Accessories

Stoeger M3000 & M3500 Trigger Spring Kit - Stoeger M3500 Accessories - Stoeger M3000 Upgrades

Рет қаралды 36,914

Күн бұрын

GET THE STOEGER M3000/M3500 TRIGGER SPRING KIT HERE: www.mcarbo.com/stoeger-m3000-...
Stoeger M3500 Review and Stoeger M3500 Disassembly for Custom Stoeger M3500 Trigger Job Demo by MCARBO! Custom Stoeger M3500 Accessories to correct Factory Stoeger M3500 Problems with Heavy Trigger Pull. Upgrade Factory Stoeger M3500 Parts with Extra Performance from M*CARBO Stoeger M3500 Aftermarket Parts to Improve the Trigger Pull. Custom Stoeger M3500 Upgrades and Stoeger M3000 Upgrades Made In America!
Upgrade your Factory Stoeger M3000 Parts with M*CARBO Performance Stoeger M3000 Aftermarket Parts to Reduce your Trigger Pull. Custom Stoeger M3000 Accessories by Combat Veterans! Upgrade your Factory Stoeger M3000 Trigger with a Custom Stoeger M3000 Trigger Job! Custom Stoeger M3500 Trigger Job to Improve Factory Stoeger M3500 Trigger! Stoeger M3000 Review and Stoeger M3000 Disassembly by MCARBO. Stoeger M3000 Trigger Job Install by M*CARBO!
TIMECODES:
Intro - 00:00
Firearm Clear - 01:04
Factory Trigger Pull - 01:11
Parts Needed - 01:29
Tools Needed - 01:40
Removing Barrel - 01:51
Removing Bolt - 02:28
Removing Trigger Group - 03:31
Disassembly Review - 04:15
Opening Trigger Spring Kit - 04:41
Replacing Firing Pin Spring - 05:00
Trigger Group Function Overview - 06:30
Replacing Hammer Spring - 07:01
Reinstalling Trigger Group - 10:53
Reassembly - 12:03
Function Check - 13:49
Modified Trigger Pull - 14:09
Wrap Up/Outro - 14:22
#MCARBO #StoegerM3000 #StoegerM3500

Пікірлер: 47

@barrystarr22 3 жыл бұрын

This is my 3rd kit from these guys and they work great. My Stoeger M3500 is pulling mid 3's to lower 4's after install. The trigger feels much better and it will help with shooting. Thanks again

@apostolicoutdoors 3 жыл бұрын

Just followed the video and got mine replaced. Great tutorial. Went very smoothly. Can't wait to get to the range and check out the improvement!! Thanks!!

@jjung2005 2 жыл бұрын

Excellent video of disassembly and reassembly!!!

@Androth12 2 жыл бұрын

Insanely easy install. Finished in 5 minutes. Can’t wait to see what it does shooting some skeet.

@jeffpowers0214 5 ай бұрын

Great video. Clear concise and done with excellence. Thank you

@deanosmondson99 Жыл бұрын

Made a huge difference, very happy. Thanks

@telleymartinez2529 4 ай бұрын

Thanks. Great tutorial! A big difference in pull now.

@TheYjmfan 3 жыл бұрын

Great detailed tutorial thanks wow 2 pound less on the trigger pull that’s incredible.

@AcumenTV 5 ай бұрын

Thanks MCARBO!

@xapricityxx3808 2 жыл бұрын

Thanks man. Great video

@bradmiller9993 2 жыл бұрын

Nice. Got my kit today and put it in easy-peasy. Mostly. Trigger is much better....thanks brother ~!

@user-dw5wq8yx1c 4 ай бұрын

Great Video. Thanks for the education.

@Bam-BamMoore-zz2vk 8 ай бұрын

GREAT INSTRUCTION VIDEO… THANKS…

@johns1200low06 2 жыл бұрын

Excellent video

@rastafari5216 Жыл бұрын

Great video man

@TheIceman101 4 жыл бұрын

Simple Thanks.

@AlanDPhd 9 ай бұрын

We use these at Ape Tactical Gunsmithing in Bristol, TN, and find that it makes a big difference and coupled with a little polishing makes for a great trigger solution. These guns can also be drilled for scope mounting which some people are not aware of.

@michelsiegler 6 ай бұрын

Qualité de la vidéo exceptionnelle 👍

@rockchalk06 2 жыл бұрын

Big like! Shame I can only like it once. My factory new M3500 in DRT trigger was really bad. Comparing it to my SBE3 and 1301, it was meh. Now, it's very close in smoothness. I'm not so worried about the weight, more so the smoothness. Very impressed with this kit. I'll do some testing for reliability this weekend.

@Pincheemoska Жыл бұрын

Stumbled onto this product looking for a Stock Screw assembly for my M3500, I will be ordering this spring kit I’ve always disliked my trigger pull, thank you

@williamroberts6803 Жыл бұрын

The little clip I would bent it smaller after I removed it and before reinstalling it so it stays in the groove.

@vahidshayeghi8411 Ай бұрын

Hello, it is very good to have a light mechanism and trigger, but if the hammer spring is light and weak, it is likely that the gun will suffer from low-firing pin stroke and will not fire in primers with hard materials such as brass.

@MinusTheSparkPlugs 2 жыл бұрын

I wonder if it would make it cycle lighter low brass shells easier due to less force required to compress the hammer spring?

@williamroberts6803 Жыл бұрын

The trick to the charging handle is to turn it counterclockwise so the detent isn’t in the hole and slide it out.

@stanholzen8508 3 жыл бұрын

Sorry guys, but after installing the hammer spring and firing spring upgrade I was getting short primer strikes on Remington 3.5" shot shells in my M3500. Federal shot shells work fine. The Federal has more of a pointed primer where Remington is more flat. Put a dent in Remington shell primer, but no bang. Cost me a couple ducks last Wednesday. Happened multiple times.. Going back to the factory springs before my next hunt.

@robertboreman7672 3 жыл бұрын

I would not change the trigger spring. Leave the original . That is probably why you are getting lite strikes. I would have only changed the sear spring. Makes sense -a lite trigger spring is going to give you lite primer strikes. Not going to change trigger pull.Sear spring is going to change trigger pull.

@robertboreman7672 3 жыл бұрын

I meant the hammer spring. Sorry about that.

@RDReynoldsOutdoors Жыл бұрын

I just ordered one for my m3500. But what about the p3500. I own both

@208SledHead Жыл бұрын

Are any of you having problems with the trigger pin walking out? I've noticed that mine comes out after about 25 rounds - and I only have maybe 2 boxes through the gun. I can no longer find any anti walk pins either - any ideas??

@Xng88 9 ай бұрын

How bout a kit to fix stoeger jam problem. My m3000 R jam to its cycle at its worst on bird shots

@nilpoj1 4 жыл бұрын

Will this work with a stoeger stf2000?

@kykrazy6050 2 жыл бұрын

MCARBO....will this work with the M3020?

@dmuhl84 2 жыл бұрын

That was the shell limiter not the follower

@reynaldoblanco2588 4 жыл бұрын

Those this kit work with the M3K 3 gun stoger as well?

@MCARBO 4 жыл бұрын

Yes Sir it will work with the M3K 3

@2S1L3NT 2 жыл бұрын

Brought my M3K down to 6#'s, but it's still such a crappy trigger. The trigger face is short, it's gritty, it's mushy, and... Well... Wtf Stoeger!? I might start grinding/polishing and trying to reprofile the hammer and disconnector or something. I hate the trigger feel so bad I might abandon the damn gun, but I'm gonna try to make it better first. I've successfully demel modified triggers in CZ's, AR's, AK's, EAA's, RIA's, AUG's, and more, so hopefully I can do something with this POS.... Wish you guys made a reprofiled trigger for this gun. Like a flat, adjustable trigger or something... Not much aftermarket support for this gun.

@philbernardo2873 3 жыл бұрын

Will it work on the Stoeger m3020

@MinhVu-in9iz 3 жыл бұрын

It should, same model, just diff ga

@ferdiqenberov7010 4 жыл бұрын

stoeger m3000 or m3500 which one do you recommend?

@mspeed1991 4 жыл бұрын

Recommend the 3500 so you have the flexibility of using 3.5" shells for hunting if that's your thing. Mine handles 2 3/4" light target loads very well for skeet. I use 3" shells for ducks and 3.5" for sandhill crane and snow geese. Great gun for the money.

@crytpolane3449 3 жыл бұрын

Both

@peterchilds9309 Жыл бұрын

It works great !!

@1clnsdime1 4 жыл бұрын

So what the point behind the firing pin spring. All this could possible help is light primer strikes which I have never heard of being a issue with the stoeger.

@MCARBO 4 жыл бұрын

When you lower the hammer spring weight you have to lower the firing pin weight for reliable ignition on tough to ignite primers. Everything in firearms is a balance.

@robertboreman7672 3 жыл бұрын

@@MCARBO True , but no one said anything about changing the firing pin here. A lighter spring will give you even lighter strikes unless you install a lighter firing pin . Less mass to move. Less energy i.e , spring tension ,required to move it. I would just change the sear spring. Less energy - finger pressure required to trip it.

@2S1L3NT 2 жыл бұрын

@@robertboreman7672 Huh? The kit comes with a lighter firing pin spring, and a lighter hammer spring... Exactly what they said. Did you watch the video?

@ThePeterbiltrucker Жыл бұрын

Me and my son both have Stogers and both do light hammer strikes, about 40% of time, they are clean and one has been sent back to factory for this,