These rollers made such a HUGE improvement on my 21 xp1000. Smoother clutch engagement, snappier acceleration, no more back-shifting lag or belt slapping. Why Polaris doesn’t include these from the factory is beyond stupid. Worth every penny.

Picked up a set of rollers last week for my 2017. Dealt with Larry and he was on the ball. Even though I called late in the day he managed to get them out the door that day. Only took two days to get them in my hands. Install was a snap, my secondary had very little wear, making things even easier. This video, and the others, sure helped ... thanks Todd.

The comments about the outside face x having zero to do with the x on the helix really saved me thank you!

The heat for removing the screws is a great tip. I will agree those rollers make a huge difference 👍

Thanks for the great videos on working on the secondary clutch. It took me less than 15 minutes to complete the upgrades to it. I was able to grab the exact tools and save time.

Great Videos and Awesome Service. These guys really dial the information down so a first timer can get it. I appreciate the emails Todd. Buy from this guy.

I bought a 2016 Polaris 900 trail with 280 miles June 2021 I found a hunterworks and based on the recommendation I checked the clutch and ordered pucks. With only 600 miles on it I found significant wear just as Todd describes. Also installed the Hunterworks belt and immediately noticed a smoother performance no more jerky starts. I now trust him and his products! I'm a newbie and appreciate the help!

I really loved your performance in the Men in Black movies!

Burton Ford sorry about the previous post. I installed the rollers in the secondary and ir really made a difference also installed a Hunterworks belt on a 2016 900 S Thanks Todd

Excellent!! Thank you!!

Thank you for the hard work.

got mine in the mail today and already installed them . much tighter and took some slop out of the clutch . thanks

Great vid!!! Thanks!!!

Great helpful video thank you. Can you tell me what would cause secondary to wobble . Input shaft on trans is straight and turns true. Bike is 2013 sportsman 850 xp. Thank you

I like very much your videos. Kindly question: 2016 rzr turbo secondary clutch will fit to non turbo 2014 rzr 1000? I'm wondering about shaft mounts and alignment - plastic cover its not a problem.

I just took my cover off to inspect and my rollers are totally shot (flat spotted almost all the way through). I'm ordering new parts from your site. I want to ask though... can worn rollers make the clutch noisy under power? Mine seems to rattle at high RPM. I may just order the complete secondary clutch. Can I get the complete secondary for my 2016 XP 1000?

I have a 2018 XP 1000 with about 65 hrs on it would now be a good time to change these rollers? Thanks for the video 👍

Do rollers assistance in smoother engagement? What else do you recommend for a 2021 RZR XP1000 4 seater?

The dealer I bought my 19 from claims that Polaris addressed the rollers, can you confirm please?

my 09 rzr 800 grinds when shifting. I aligned the belt and replaced the primary clutch bearing. the belt is centered on the primary but the sheaves still contact the sides of the belt so the secondary clutch is turning even at idle. Whats wrong

I have a 2019 rzr 1000 s 4 seater it have a clutch upgrade and a tune in the pass ive have it up to 90 plus mph with plenty more to go now im bouncing of the rev limiter at 65 could this be cause of the square pucks in the secondary?? I dont think they shop changes the secondary just the primarily clutch thanks

I have a 2014 rzr 800s I'm on my 3rd belt in a year I've changed the primary clutch but it still has a roaring sound when I drive it what could this sound be and the cause of so many belt breaks

I have a question I have a 2020 rzr 900s and it has a jerky start what causes that and how can I fix that ?

I want to up grade my 2017 rzr 1000 none turbo with 32” tires what clutch kit would I need ?

I had mine apart and the outer edge where the belt rises at low rpm I believe is oxidized and pitted should I be worried?

My 17 xp is screaming in the secondary, been told it needs a new helix, been told I need new rollers.....what do you think??

What's are the symptoms of flat spotted rollers? Found flats spots on a 900 I'm working on currently

What would cause your rollers to be getting cut? The one side is being grooved bad.

Is the rod on the puller or press a 1/2 inch or a 3/8 inch all thread? I wish you audio was better or your voice louder, had to turn up volume all the way and your still hard to hear and understand you.

Does my 2020 RS1 have the new rollers?

Is this still applicable to the 2024+ RZR 1000 XP?

Burton Ford

So I have purchased stuff from you Todd. Why the flop to Polaris? Yamaha to dependable to make a living. 😂. Your swap to selling Polaris parts must be setting you up for retirement