Storm Tuning Stage 3 Defender TD5 with modified intake

Рет қаралды 57,238

Tom Cross

5 жыл бұрын

Пікірлер: 28

@magyaradam7039 4 жыл бұрын

Hey can you list all the stuff u did to it?

@edrawarwickshire3701 3 жыл бұрын

In my places, theres many of ricer non turbo look alike Mitsubishi...but not like this one, this is pure 4x4 Rugged Lorry Td5😆

@ltuggers7381 5 жыл бұрын

hi there, i absolutely love it, sounds and runs fantastic..... what engine mods have you done before getting the stage 3 Remap..? Air filter..? Intercooler and hoses..? Straight through exhaust..? EGR Blanking..?

@tomcross5004 5 жыл бұрын

All of the above.

@jamesward3414 5 жыл бұрын

Tom Cross could you give us a description of the mods

@daverave2204 5 жыл бұрын

Sounds great, what did you do with MAF sensor?

@tomcross5004 5 жыл бұрын

It’s on the shelf in the workshop 👍

@daverave2204 5 жыл бұрын

@@tomcross5004 Out of interest have you had any hassle with it being removed, or has the remap allowed you to tweak it and eradicate it? Cheers

@roberttown2816 4 ай бұрын

MAF Mapped out?

@bondboym 5 жыл бұрын

Is the tuning done where you are ? I live like 1 minutes drive from twin woods

@tomcross5004 5 жыл бұрын

Yep.

@bondboym 5 жыл бұрын

@@tomcross5004 have you got a way of contacting you ? How much would it be for a stage 3 map mate ?

@tomcross5004 5 жыл бұрын

TheArcadeCrusader Storm Tuning are based on Rotherham. If you have a Nanocom you can install it yourself otherwise we can install it for you (look up Twinwoods 4x4 Ltd on Facebook and send us a message).

@oliverwatters9414 3 жыл бұрын

Hey mate do you still run this set up any issues and did you have to do any tuning?

@tomcross5004 3 жыл бұрын

Pretty much, although it's had another different remap since then, now pulling 212bhp/444Nm on the standard turbo. VNT is next, we did try one but it was no good and the tuning company it came from didn't want to know.

@oliverwatters9414 3 жыл бұрын

So you have had no issues running the cone filter, did you just make a custom turbo to filter pipe? Some noise of it! That’s serious power

@tomcross5004 3 жыл бұрын

@@oliverwatters9414 The pipe from the turbo to the filter is actually Allisport one that I have cut down LOL. But no issues at all with the cone filter. With it setup the way I have I have lost the MAF, not a big deal though

@oliverwatters9414 3 жыл бұрын

@@tomcross5004 no worries losing the maf they just give bother in my experience, you going for a td5 inside vnt turbo? What you looking at pushing power wise with the new map?

@tomcross5004 3 жыл бұрын

@@oliverwatters9414 personally I wouldn’t touch anything from TD5inside. I’m keeping an eye on the @Alive Tuning VNT, I know it’s been in development for several years, but after my last experience with a VNT I’m going to wait until there’s a few out there and see how people get on with them. I won’t be looking for massive power increases, 220bhp and high 400’s torque would be good. I think beyond that im going to have issues with stuff breaking!

@oliverwatters9414 5 жыл бұрын

how did you modify the intake?

@tomcross5004 5 жыл бұрын

Removed it and replaced with a cone filter

@oliverwatters9414 4 жыл бұрын

Did you make intake pipe your self or did you buy it somewhere would love to this on my td5

@TheRevolutionCycles 5 жыл бұрын

Is this an upgradedturbo

@tomcross5004 5 жыл бұрын

Sam Righton no it’s standard, at the moment 🤔

@procta2343 5 жыл бұрын

@@tomcross5004 what is the mpg like?

@tomcross5004 5 жыл бұрын

Procta it’s not bad, 25-30 depending how you drive

@procta2343 5 жыл бұрын

@@tomcross5004 I am looking at buying the TD5, but its going to be used for motorway miles, My 300 was, until two cunts took it, this year, and that was averaging about the same MPG as you say.