NOTE: For those of you guys who try this and get a black screen, make sure your brightness is above 0. Great tutorial man, someone suggested I check out the lesser known KZfaqrs, good call. Hopefully you will go far my guy. Also, I didn't know there was a size limit for the code, lets just say "brightness" became "b" real quick haha, at first I doubted. Now I do not.
@coleholmes4533 Жыл бұрын
yo this is so much better than the other map video i saw, this is exactly what i want and its much higher quality
@norwayspotter264 жыл бұрын
Im so glad i found this channel, its so hard to begin playing stormworks and making cool advanced things due to the lack of any tutorial in game
@markers62224 жыл бұрын
Glad you enjoy it!
@ctrlaltdisease3 жыл бұрын
So clear, so easy to follow. 10/10 would recommend.
@benjaminschultz65013 жыл бұрын
You are a Godsend. I've been stressing about how to make map zoom buttons work for the last day. Thanks for the push I needed! :)
@JohnDoe_752 жыл бұрын
I came here for the on screen zoom buttons. Very underrated video, great job. Only slight little remark I have is to point out where to change values for larger map sizes like when you skipped over the 64,64. No need to hand hold further than that. Thanks for the content ! Subscribed.
@aaronchadwick26822 жыл бұрын
Awesome map! I was pretty confused why the dot didn't follow then realized it's set to the coordinates typed in the key pad. A gps sensor goes a long way :D
@rainermateo Жыл бұрын
How can i get a map that actively tracks player
@McLaren_20093 жыл бұрын
Outstanding Video! This was very informative and helpful in attempting to make an interactive map.
@CharizardLMAOАй бұрын
nvm i decided to remove the arrows except for the zoom in out feature cuz my small tiny peanut brain cant handle fixing bugs nice one!
@CharizardLMAOАй бұрын
the problem is now fixed but the arrows are scuffed up, the zoom in and out works tho
@jaimianscharr63204 жыл бұрын
This is awesome cant wait for more
@markers62224 жыл бұрын
There will be more
@comedywiththeboiez8879 Жыл бұрын
did not work for me it says i have a error
@Britishpotato-14 күн бұрын
Hello man i did qhat u did in vid but when i press turn on it shows an error saying tick faliur in 1 or more connected scripts
@CharizardLMAOАй бұрын
for some reason it says 'end expected (to close 'function at line 6) near can u help me pls
@forgenet54594 жыл бұрын
You awesome dude :3
@thusharikabotheju56553 жыл бұрын
Wow thx soooo much😄😄😄
@rodfornillosiv73163 жыл бұрын
this great video deserves 1million likes like now and sub cause he smart
@tutorialswithaidan13144 жыл бұрын
why does it look like I should have those movie theater 3d glasses on?
@TheChristmasPooo Жыл бұрын
Hey man I managed to get this partially functional. Followed your script but I can’t seem to get the zoom in and the up and down arrows to work. My arrows light up but no function. My zoom in has no action. What am I doing wrong?
@BHGYT4 жыл бұрын
Noice
@xedeathros2 жыл бұрын
after following everything, the display on the monitor says, script error tick failure, any thoughts?
@karithefox Жыл бұрын
a nil value on line 53 how do i fix this?
@MarreLirre4 жыл бұрын
More!
@roybjx46464 жыл бұрын
nice tutorial bro....but my brain is melting also my pc cpu
@vhbcccuhvv85345 ай бұрын
if i turn on the screen its says, Tick error, 10:attempt to call a niv value (field 'getnumber'). I check the LUA its okay 0 errors, everything is copied exactly like in the video. Btw isnt this need a gps locator on the boat? cuz i tried it and its doesnt work either no matter what i connect to what. Thanks if any1 answers me :)
@tregreen18852 ай бұрын
Same issue lol
@vhbcccuhvv85342 ай бұрын
@@tregreen1885 i managed to get it work, some lines had errors with missing ' or ( ) etc. Also you yes, you need a gps on the boat.
@42-ohuythang412 ай бұрын
@@vhbcccuhvv8534 yo i pressed check for errors in the LUA scripts but none were detected, yet it still doesnt work. And i do have a gps sensor working too, would u might help me a bit?
@42-ohuythang412 ай бұрын
@@vhbcccuhvv8534 a nevermind it worked just the coding problems ty anyways!
@Britishpotato-14 күн бұрын
Hello i have same proplem but im no coder or anything so i dont knoe what to do
@weavybigiron82912 жыл бұрын
Very helpful video, but i have a problem, i did everything you did in the video but when i set the brightness to any number the screen stays black, any idea what might be the problem? thanks for the video anyway.
@Bendigo12 жыл бұрын
Make sure to change the composite write to have enogh channels to match the numbers in the lua script. i had an issue where i was getting errors because the channel numbers werent matching up
@weavybigiron82912 жыл бұрын
@@Bendigo1 Hey man, do you mean errors like getting a blue screen on the monitor? If so i do not have that problem, my problem is that my monitor just stays black after i turn it on no matter what brightness i set. How many channels you have in your composite write? I have 3 channels just like the guy in the video, Brightness goes trough the numerical switchbox and then connects to the 1st channel, X goest to the 2nd channel and Y goes to the 3th, do i need more channels? If not i feel like i did something wrong in the Lua script, and if you could Copy and Paste your Script i could try that to see if the problem is with something i typed wrong. Thank you for trying to help me :)
@Bendigo12 жыл бұрын
@@weavybigiron8291 yes, i was getting a blue screen with an arithmatic error. i downloaded the microcontroller he made to compare my setup to. i still can not getm mine to work and am working on it. i noticed that on the one he had on steam he has acomosite write with 9 channels but in the video he only uses 4. but there are getNumers(6) and higher in the script. on your setup it sounds like the monitor isnt wired up right or is not turning on. i would double check the connections.
@weavybigiron82912 жыл бұрын
@@Bendigo1 I got the brightness to work, you were right, it has to do with the channel numbers, sadly for some reason touch doesnt work but at least the rest seems to work, if you are still getting a blue screen it probably has to do with the Lua Script, maybe you forgot to (end) a line. If i manage to make it work properly ill make you know and ill try to explain it to you. Edit:Remember you can check for errors inside the Lua Script, if it doesnt show errors and you still get a blue screen, in the screen should tell you what is the problem. If you want tell me what is the error and ill try to help.
@Bendigo12 жыл бұрын
@@weavybigiron8291 I i need to g through and check the numbers in the LUA file. the touch not working could be bcause of the wrong x/y coordinates, they have to match up otherwise it wont work.
@capitutoriales80443 жыл бұрын
And if I want to put a bigger monitor what would the command be?
@blockmaster10023 жыл бұрын
Just change the x,y values for the things on screen to your liking
@capitutoriales80443 жыл бұрын
@@blockmaster1002 ok
@tscbrave42014 жыл бұрын
how would i make this for a 5x3 screen? im new so idk
@markers62224 жыл бұрын
try the same steps. But you will have to adjust the position of the map and buttons
@tscbrave42014 жыл бұрын
@@markers6222 idk how to do that this is my first time using lua
@markers62224 жыл бұрын
@@tscbrave4201 I guess just stick with this 2x2 monitor for now. If you really need a 5x3 map you can definitely find some on the workshop. Once you get a better grasp on the game you'll for sure be able to modify map code to fit any screen, its just hard for me to explain which exact changes to make over text.