Carnage - Finishing The Last Pieces On The Drag Challenge Ute

No video

Carnage - Finishing The Last Pieces On The Drag Challenge Ute

Рет қаралды 22,882

Күн бұрын

Our Drag Challenge Ute has turned into a much bigger project than we initially intended, but it's also turned out a lot better than we had hoped. This week, we finish off the brake lines, fit the tailshaft, sort out the power steering pump and locate the bits we need to finish the interior. It's almost done!
Street Machine Carnage is all about having fun with cars. Sometimes it's serious performance, sometimes it's crazy fun, but it always interesting and done on a budget.
If you wish to send the Carnage team fan mail, mail to:
Street Machine Carnage
2/58 Amberley Crescent, Dandenong, Victoria, 3175
Subscribe to Street Machine for V8-powered good times
secure.whichca....
Street Machine is Australia’s number-one modified car magazine, bringing V8 and six-cylinder powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.c....
Facebook | streetma...
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv

Пікірлер: 157

@builtbybagsy Ай бұрын

Nice job Scotty. Can tell from the video you are in a good place. Great to see the positive vibes, it comes across in the video. Nice work.

@ChristopherHallett Ай бұрын

Brad sounds like a real quality unit, I hope you loaded him up with Street Machine swag!

@tobysemler Ай бұрын

The brake lines look mint! Great job Scotty.

@Devastator0 Ай бұрын

Love your work as always Scotty! Gotta say, what an absolute legend viewer/subber Brad is for getting you the bits and pieces! Keep up the great work mate!

@benjaminwarwick5904 Ай бұрын

true Aussie spirit always happy to help hats off to you BRAD luv ya work

@R31IceMan Ай бұрын

Scotty, you didn’t phase the rear half of the tail shaft to the front half. You will be a bad vibration if it’s not phased, it also wears out the universal joints faster if not phased.

@STREETMACHINETV Ай бұрын

I'll have a look at it

@mayhemracing7579 Ай бұрын

I noticed this too. It’s out by about 45 degrees

@user-rx4jl3ll9e Ай бұрын

I was just about to say the same, tailshaft it out of phase. Otherwise doing a great job.

@Robroy1985 Ай бұрын

I saw that

@gazza116 Ай бұрын

hoped you phased the uni joints,2 piece tailshaft very important,bad vibes if not done.great vid though.

@christianwuchatsch9510 Ай бұрын

Comming along nicely. You should mention/ shout out who is doing the tail shaft. I don’t want to be waiting that long for mine by using that company. If Street Machine had to wait this long, I can only imagine how long it would take for us normal blokes to get ours done by this company

@Malm957 Ай бұрын

Yep Brad is a really good kind hearted bloke. I should have known he had been up to something when he said look at this video. Good onya Brad.

@Mister-Caprice Ай бұрын

what a great episode!! and Brad!! the MVP!! 🤩

@DodgyBrothersEngineering Ай бұрын

Just like a bought one only better. Nothing beats the satisfaction of knowing you made that.

@edwinsmith7080 Ай бұрын

Hi Scotty, you need to clock those universals please

@STREETMACHINETV Ай бұрын

Yep, I'll sort that out next time it's on the hoist

@tony66au Ай бұрын

The last 5% is always the biggest pain in the arse and sometimes the greatest margin for fkukups :-) Gotta say though those hard lines for the brakes look schmicko!

@michaelteasdale2919 Ай бұрын

Ten points for the Mad Max reference 👌👌👌 I don’t think the kids caught it 😆

@damoryan3873 Ай бұрын

Well done scotty can't wait to see it on the road.

@HazeyAuto Ай бұрын

Best thing in the workshop during winter is one of those Jetfire heaters. Couple of minutes runtime in the morning and everything’s toasty. You could even run it off Turbo Taxi’s LPG tank if you didn’t have a BBQ gas bottle sitting around.

@francfurian8215 Ай бұрын

"Scotty happy with that" me too Scott keep at it & well done. Cheers😊

@danielsultana5615 Ай бұрын

Looking good mate can't wait for the next episode 👊

@mysticgreg Ай бұрын

How good's Brad?!?

@rikturna Ай бұрын

This is perfect timing. Sitting at the airport waiting to head home and get to chill watching Carnage!!!! Sweeeeeeet!!!

@danozism Ай бұрын

I know what you mean about cold weather and motivation. It's been bloody freeeeezng down our way, hasn't it Scotty? Working in drafty old sheds at night has been shocking the last few weeks!

@Low760 Ай бұрын

Lexcen vr-vs is statesman headlight arrangement. But very cool! It's funny how the protectors were first to go usually and now we find them to install.

@tex308253 Ай бұрын

It's actually only the indicator shape on the guards that are the same,the indicator on the vr/vs Commodore models just sits inside the smaller indicator guard shape further ! 😁

@haydeneaves8873 Ай бұрын

Next build should definitely be a burnout car who’s with me !💪💪

@michaelbeddow9195 Ай бұрын

Need to start doing blooper vids, absolutely great

@bigal878 Ай бұрын

I hope you ‘lubed’ that shaft Scotty lol 😂 Great video and progress mate 👍

@donfinch862 Ай бұрын

Great job Scotty, you've definitely got the skills and know how. Cheers

@xozindustries7451 Ай бұрын

It’s great that you guys can make soft brake lines, I’ve never seen those in the US, it would save me a ton of hassle if I could make my own

@PiazzaWoodWorks Ай бұрын

What a mission mate! Love the journey and showing us ya methods, cheers

@jakebeaton9317 Ай бұрын

Gonna have a wicked vibration with the tailshaft unis not being in phase now 😂

@STREETMACHINETV Ай бұрын

It's already fixed

@Angelpv89 Ай бұрын

This project turned out to be really cool to watch great job 👍

@scotthunter1639 Ай бұрын

Fantastic content as always Scotty good job mate!! Finish line is close now mate 👍 👌

@Blackbirdrod81 Ай бұрын

Great video mate, everyone loving this build and series

@madtlrmat Ай бұрын

Another great vid mate. Thanks to you and the guys for putting it together again. Nice one BRAD!! Fricken legend! Maybe you can snaffle a ride in the beast once it's done...?

@manuelstarr3602 Ай бұрын

Scotty, I had a Truck that had a Centrifuge Oil filter. If you set up a Centrifuge you could get all the Metal shavings etc. out of oil used on the Dyno or Rece tracks. Cheers mate.

@Beer_Dad1975 Ай бұрын

LOL looks like the Sexy Spambots are loving your content Scotty! Anyway, great progress - won't be long before we see what the ute can do at the track!

@reidkeevers Ай бұрын

I ❤ Headlamp Protectors

@brushitoff503 Ай бұрын

Ha ha bloody awesome stuff Scotty! Cheers

@Tad-tr6vi Ай бұрын

Don’t burn out, mate. Remember to love it.

@1969Risky Ай бұрын

Gee Scotty, no little Hassan Chop when you were doing the brake lines! I didn't get my Hassan Chop for the week. Good to see that you're not far to the end with this ute. I can't wait to see you test it. Great video as always mate :)

@pauldeery2275 Ай бұрын

Another amazing job done by Scotty!

@87xfute Ай бұрын

Hey Scotty, is it me or is the rear tail shaft out of alignment with the front slip joint by about 90 degrees, they are suppose to be in align with each other. Otherwise you can end up with an horrendous vibration. Seeya Rob.....look at 26mins 8secs you'll see what I mean.

@STREETMACHINETV Ай бұрын

A few people have mentioned that. I'm not usually a two-piece shaft guy, but I'll go back and check it out

@benjaminchuutachurchill7 Ай бұрын

I asked the same question about all my ss Utes and where on an angle when in the air

@gregivey183 Ай бұрын

I usually boink the shaft or trunnion to get u joint cups to seat out to the circlip- then check by rocking 😊

@bill13690 Ай бұрын

Each morning, I always look forward to hearing one of your videos. You brighten my day. After this video, I am going straight on to my keyboard. And I'm going to play that song associating the 1995 Nissan Pulsar, hatchback the car, you remind me of. Perhaps I will do a recording on it later. And put that up onto my channel as well with a car photo.(1995 Nissan Pulsar. hatchback)

@GRUMPYOLDSURVEYOR Ай бұрын

Oh it looking so good! Makes me want one 🎉of

@kathyhumpage5160 Ай бұрын

Man it is soooooooooo cold it the shop you can not see your breath! give me a Aussie winter any day beats the -26C in my shop up here in Canada last winter! love the vids keep them coming!

@STREETMACHINETV Ай бұрын

Haha

@honestpat7789 Ай бұрын

It might not be perfect, but it’s good enough for Scotty 😂 There’s your new tagline for Scotty’s Garage 👌

@DasKleinbus Ай бұрын

Great job legend , and happy birthday for the other day 🎉🤙🏻

@Doc_in_the_carpet_truck Ай бұрын

Pisser Scotty !!! Nice work 👍getting closer !! Doing lower control arms on the ve wagoon tomorrow thank f*ck for a hoist 🙃

@joannevanlierop4330 Ай бұрын

Engrave "Made by Scotty " into the side of the adaptor plate😎👍

@craigmooney2630 Ай бұрын

Head light covers and 10 second quarters “ could turn into birdies 🤠

@drewimrie9982 Ай бұрын

the lexen used statesman front guards but the bumper is there own doing .

@JossRickard Ай бұрын

Is it perfect? - No Does it work? - Yes Then it's perfect

@bengibson3955 Ай бұрын

If I had a dollar for every time I forgot to put the fitting on before flaring..........🙄 She's lookin' good, Scotty. Love ya work, big fella!

@bengibson3955 Ай бұрын

Have you got a link for the double flaring tool? I've been considering a Vevor one that looks very similar to the one you used, but I'm only too aware that lower quality stuff tends to push the line backwards when you try to do the first part of the flare.

@STREETMACHINETV Ай бұрын

Look up Proflow or VPW

@knight2425 Ай бұрын

It’s taking me a little to get my head around if I’m watching Carnage or Scotty’s Garage 😂😂

@STREETMACHINETV Ай бұрын

Haha

@paule4204 Ай бұрын

Thanks brad

@TankyMcStagger Ай бұрын

Doubling up on the "thats what she said" to make up for last week But you missed the hattrick 🤣 Also the sparkly stuff is also known as "angry glitter". not hard to figure out why 😄

@gqy60stephankarolyi41 Ай бұрын

Tell Telford that Stef said to get you a fkn diesel heater in the shop. Got to have some comforts mate👍

@gogetem188 Ай бұрын

nothing like a clean SHARFT in the post lol

@wingoson Ай бұрын

Hey Scotty thought about a diesel heater? one by vevor are like 190 bucks and they re amazing get the one with a 10 litre tank and hard lines are best. Remote controlled turned it on from the car have it warming as you walk in.

@STREETMACHINETV Ай бұрын

Yeah,but they burn through alot of diesel

@joannevanlierop4330 Ай бұрын

Hope you hooked Brad up with some Street Machine merchandise 😉

@grimreaper6112 Ай бұрын

Get it on the dyno.

@jgrieve3282 Ай бұрын

Had to laugh at using the Phone to see, won't be long until you're scrambling to find some reading glasses too 😉 If there weren't liabilities to worry about you could build a waste oil heater for the workshop as a side project.

@STREETMACHINETV Ай бұрын

It was more the fact that I couldn't get my head above it to see, but yep phones are handy for the small stuff

@aaronm8694 Ай бұрын

haha, it's 5 million degrees in my shed in Darwin. You know, all the old people who retire up here move to Cowra, or Nowra or anywhere else where its like 24 degrees all the time. Im starting to understand why.

@aaronm8694 Ай бұрын

Me Id probably move to Nimbin because its 23.5 degrees :)

@mattwilmott4454 Ай бұрын

maybe Euroblade would like to sponsor Streetmachinetv so our mans fingers don`t fall off.

@mortonking8265 Ай бұрын

Is that the vevor flaring tool? Cheers

@jamesbaylis9438 Ай бұрын

"You've Seen It" - At MotorEx, even knowing it wasn't done, she was still looking Mint! "You've Heard It" - not at 7500 RPM, but we'll get there. "And You're Still Asking Questions" - There is only one question left, how Fast are you willing to SEND IT!! ☝☝☝☝

@adamp.8603 Ай бұрын

Are the uni joints in rear half of the drive shaft ment to be phased

@STREETMACHINETV Ай бұрын

Probably

@SHOCKcustoms Ай бұрын

Interested to know why you aren't using braided flex lines when completing the brakes lines instead of rubber? Especially on a race car. Great vid Scotty

@STREETMACHINETV Ай бұрын

We could have done braided but I just went quick and simple.

@Robroy1985 Ай бұрын

You are gonna see all that on a future episode of SCOTTYS GARAGE..............

@jimclarke1108 Ай бұрын

The ute looks like it had a major polish job or some paint?. great work with the build Scotty

@STREETMACHINETV Ай бұрын

Nope, just cleaned it for MotorEx

@biggity6545 Ай бұрын

That rear drive shaft is out of phase scotty

@STREETMACHINETV Ай бұрын

All sorted

@davidcerra9579 Ай бұрын

Just curious why you didn't go braided brake line Scotty? Good stuff mate! Time to invest in a heater for the work shop 😢

@STREETMACHINETV Ай бұрын

Not really needed, we used rubber in the Mazda for years

@chuxshed587 Ай бұрын

Aren’t your intrusion bars too low? Did you look at moving the pump up as well as in for more clearance?

@STREETMACHINETV Ай бұрын

Dunno, I assume MPW knows what they're doing

@timgooding2448 Ай бұрын

You'd go nuts if you could have a laugh in the shop Scotty. What was it called again?

@matthewmarks5477 Ай бұрын

You’ve seen it, you’ve heard it and your still asking questions, when can we go for a ride

@jonling5173 Ай бұрын

😂 I just put penrite 140 mineral in my 9” and done the same 😂stinks and sticks like s@$t on a blanket😂

@andrewlewis1528 Ай бұрын

HDT Headlights??

@shanewilson5248 Ай бұрын

good stuff big scotty , lexan headlight covers approved .didnt know the front of lexans are diffrent to dunnydoors . the utarus is getting crazy supa flash!! , what is the expectation for timeslips?

@STREETMACHINETV Ай бұрын

We'll start at 8.50 and work our way down

@honestpat7789 Ай бұрын

@@STREETMACHINETVput a lexen badge on and see if that makes a difference 😂

@bronplayz3377 Ай бұрын

Where is hemi torana?

@drifterdrifter9558 Ай бұрын

When do we go for a drive.... 😂

@warrenscarlett9302 Ай бұрын

👍👍👍

@kronicismygame Ай бұрын

should be using astra power steering pump mate, do away with having to have that belt so close to the header

@STREETMACHINETV Ай бұрын

I've already talked about that in the videos. They gave a high current draw, and I need all the amps I can get for the fuel and ignition system

@kronicismygame Ай бұрын

@@STREETMACHINETV ah yeah that makes sense

@crunchytheclown9694 Ай бұрын

woohoo

@brucerichards9102 Ай бұрын

No need to let perfect get in the way of good.

@GrannyBoho2465 Ай бұрын

Nice job Scotty. Can you let me know what the music is that you play in the background

@STREETMACHINETV Ай бұрын

That's a question for Matty

@GrannyBoho2465 Ай бұрын

@@STREETMACHINETV thank you. so when Matt’s on board could he let me know please

@jameswolski7743 Ай бұрын

Doesnt that oil have a lsd additive? Big No No if you want the true trac to work.

@markthompson2580 Ай бұрын

the uni isnt lined up with the front one

@STREETMACHINETV Ай бұрын

I'll fix it

@byronrivans1647 Ай бұрын

Why don’t you use an astra power steering pump Scotty? Then there won’t be a belt running anywhere near the headers

@STREETMACHINETV Ай бұрын

Massive current draw, and I need that power for other things.

@davydoo81 Ай бұрын

“When do we go for a ride?”

@A.R.C.77 Ай бұрын

😃🤘

@DodgyBrothersEngineering Ай бұрын

Why don't you just wrap the pipe? Now that you have space you have room for some wrap. You aren't going to get a lot of belt deflection so close to the pulley, so if the wrap clears it should be all good.

@STREETMACHINETV Ай бұрын

We may do that still

@hoonaticbloggs5402 Ай бұрын

Cold ? Try working outside in England in winter. You need more than a hoodie

@STREETMACHINETV Ай бұрын

I bet

@STREETMACHINETV Ай бұрын

I had to laugh the other day when they said England was experiencing a 25 degree heatwave

@hoonaticbloggs5402 Ай бұрын

@@STREETMACHINETV 25 is nice. When it’s 30 everyone is dying. Loving the content dude , can’t wait to see the Ute on the strip

@cze33e Ай бұрын

Zero degrees. What's your daily Scotty?

@STREETMACHINETV Ай бұрын

AU Falcon

@brendanmoir6933 Ай бұрын

So have they lost there Valvoline sponsorship

@STREETMACHINETV Ай бұрын

Wow, that was 3 years ago.

@jamiegreenwood7996 Ай бұрын

i would be more interested in Ute build if it was may be a au Ute with a coyote or mi Amee installed running twin turbos or super charged too much of this chevy motor stuff these days

@STREETMACHINETV Ай бұрын

Maybe next time

@tiara-leewilliams391 Ай бұрын

Support your family and do all your mechanics on your own channel stop giving Street machine. All the good content. I mean I would pay to watch your videos but I’m not paying a big organisation like straight machine. I want to support you and your family

@jeepnutscotty Ай бұрын

But SM funds these projects, not Scotty… no SM $$ means no protect cars and no channel… you think he’s got over 100k laying around to build this ute? No one has. Scotty couldn’t afford the shed rent on his wages let alone cars, parts, tooling etc

@STREETMACHINETV Ай бұрын

This is my day job, Scotty's Garage is what I do on weekends. I agree that Street Machine should be big enough to do this without Patreon support, which is why we don't do that. Scotty's Garage is a different matter, and a different channel.

@RWB1111 Ай бұрын

He is supporting his family you muppet

@jeepnutscotty Ай бұрын

@@STREETMACHINETV and both are the same same, but different. Scotty's Garage has a more grass roots, backyard shed flavour to it which is very relatable to the majority of viewers, then the SM Cranage channel takes it up a notch with garage equipment and tools etc, both are awesome, relatable, educational and just damn good viewing... Bravo to all the crew that make it all possible, and don't forget it's free content people... Free

@STREETMACHINETV Ай бұрын

@@jeepnutscotty thanks mate