Stringing A Badminton Racket - POV Tutorial
Рет қаралды 47,811
Күн бұрынStringing A Badminton Racket - POV Tutorial
Stringing a badminton racket from the first person of view (POV) along with commentary with the DJI Osmo Action ((Amazon) geni.us/cXl7x).
The racket being strung: Yonex Astrox 88S (Amazon) geni.us/BIvbXt7
00:00 Start of video
00:05 Removing used string
01:00 Inspecting racket
01:25 Mounting racket onto stringing machine
02:26 Setting tension on stringing machine
02:46 Measuring string
03:20 Inserting mains string
03:52 Pulling first mains string
07:53 Inserting extra string at shared/single-pass holes: 08:18; 09:15; 09:48; 10:28; 11:20
10:54 Tying off mains string: 11:45
12:41 Inserting cross string
14:30 Weaving second cross string
15:42 First cross string pull
22:56 Getting through first blocked hole
25:20 Getting through the blocked hole with a Starting Clamp
28:01 Tying off cross strings
28:59 Unmounting racket
Stringing Machine: Pro's Pro TX-700 with Chudek side supports and WISE 2086 Electronic Tension Head
Badminton Racket: Yonex Astrox 88S
Badminton String: BG-80 (Pink)
String Tension: 28lbs Mains x 30lbs Cross, Constant pull, no Pre-stretch.
Hand Tools used: Thin-nosed pliers, scissors, string-puller and starting clamp.
Supplementary stringing video from third angle view: • How to string a badmin...
Watch LIVE BWF Badminton with VPN:
NordVPN - Fastest speeds plus a bonus gift. Or use code ‘ckyew’. - go.nordvpn.net/aff_c?offer_id...
ExpressVPN - Most server countries plus 3 months free - www.expressvpn.com/ckyew
Please subscribe to the channel @ kzfaq.info?sub_con...
☕️ Buy me a coffee? www.buymeacoffee.com/ckyew
More equipment info at www.ckyew.com/youtube
📸 Camera:
Panasonic Lumix G80 (Amazon): geni.us/lumixG80
Panasonic Lumix G85 (USA - Amazon): geni.us/lumixG85
DJI Osmo Action (Amazon): geni.us/zt97RfJ
iPhone (Amazon): geni.us/RzBCsv
Wireless Video Transmitter (Amazon): geni.us/hollymarsx
🎙 Mic:
Wireless Mic (Amazon): geni.us/ckrodewirelessgo
Cheap Wired Mic (Amazon): geni.us/ckrodevideomicro
💾 Storage:
Cheap way to get 16TB Seagate Exos drives (Amazon): geni.us/v0BUa
Seagate Exos X16 16TB hard drives (Amazon): geni.us/exos16
Seagate Ironwolf 4TB NAS: Drive (Amazon) geni.us/JBTXD
Samsung X5 Thunderbolt 3 External SSD: (Amazon) geni.us/2n4b71Q
Samsung T5 External SSD: (Amazon) geni.us/HAT6G
Cheap Network Attached Storage NAS (Amazon): geni.us/Terraf5_221
RAID Storage Array (Amazon): geni.us/owcmercuryEPQ
Thunderbolt 3 RAID Storage Array (Amazon): geni.us/owct4bay_t3
🗜 Accessories:
Lights (Amazon): geni.us/rlight
Magic Arm (Amazon): geni.us/magicarmSR
Camera/Mic/Light Stand (Amazon): geni.us/ckmicstand
📈 Software:
Royalty-free music I use, FIRST MONTH FREE: www.epidemicsound.com/referra...
TubeBuddy, install for FREE: www.tubebuddy.com/ckyew
Geniuslink: geni.us/9s2T
Grammarly: grammarly.go2cloud.org/SH2pS
I may get some money if you purchase from the links above. It doesn't cost you more so please buy lots! Thank you! 😊
My website: www.ckyew.com/
Any questions, please ask and I will do my best to reply! Thank you.
@CKYew Жыл бұрын
Protect your badminton rackets with CKYEW's Premium Racket Protection Tape: www.ckyew.com/shop
@kasujung6202 Жыл бұрын
Where did you learn stringing?
@hignfy 8 ай бұрын
So I just watched Tobias's video with the Yonex Stringing team (The Art of Stringing Part 2). The video from 2022. They've modified the way their cross string, especially with high-tension and with Aerobites.. 1) The starting knot on the cross strings at B6 no longer wraps around the main string to prevent breakage. 2) When you reach to about 3 or 4 crosses left near the top of the racket, string from the *top down*. And instead of tying off at A5/a5 and wrap around the main string, tie off around A10/a10 onto a cross string. I've just started to do my strings like how they do now. I have to say it feel a little more confident, less iffy than wrapping around the mains on either end.
@pakdjat4591 2 жыл бұрын
One of the best person who explain about badminton stringing techniques
@CKYew 2 жыл бұрын
💪🏻💪🏻👍🏼👍🏼
@duncansimpson2337 4 жыл бұрын
I just wanna say thank you CK. I've really been struggling recently, I've tried EVERYTHING, I thought i'd never get passed this, this video has been nothing short of a god send. I was asleep in minutes :) xx
@CKYew 4 жыл бұрын
😘
@jeffcoffey8970 Жыл бұрын
Fantastic video! Thank you.
@CKYew Жыл бұрын
Glad you found it useful!
@laurencesyeng6182 2 жыл бұрын
For the share grommet, instead of using a small piece of string, I use a piece of ribbon to lift the blocked string because the ribbon is wider and stronger.
@CKYew 2 жыл бұрын
That’s a good alternative too!
@GI-nh3zw 2 жыл бұрын
Hi thanks for the detailed video. Quick question - you mentioned you hold your fingers by the clamps to check for any slippage. Has slippage like that happened to you before, and if yes, how do you fix it? Thanks in advance!
@CKYew 2 жыл бұрын
Yes, if its slipping, check your clamps, the pressure as well as the teeth (if you've been cleaning them, etc). Different diameter strings also makes a slight difference.
@albertchui8462 2 жыл бұрын
A suggestion to prevent starting mains from slipping is apply a starting clamp beside the machine clamp so you won't have to hold the string during the first pull.
@CKYew 2 жыл бұрын
Yep, I certainly do that with slippery strings and also certainly with flying clamps too 👍
@SoJuDaMaN Жыл бұрын
how do you get into stringing from scratch? Don't know where to start, what machine to get etc.
@mchengalath 9 ай бұрын
Thank you for this video. For a 72 hole racquet, where do you start the cross, on the left side or right side? Yonex instruction is to start at the right side, that would mean 3 knots would come to the right side while 1 knot to the left side, which is not the case for 76 hole pattern!
@duncansimpson2337 4 жыл бұрын
love pauls camio
@johnd9088 Жыл бұрын
Hi, thank you for the excellent video. Would you have a link with stringing devices reviews? I have a stringing device (a very old one) with a rotator and I would like to buy a new one with parallel pull that is more precise. Mine now is really not precise and I want to be more precise in my stringing work now. If you know of a website or good video explaining the different stringing machines and which one is best (not for professionals) but more for own family playing. We tend to do new stringing 6-8 times per months... Thanks for your help ;).
@stevegriffiths8805 2 жыл бұрын
Hi I know this is an older video but please can you tell me what side supports you use on the machine? I have the same machine but the stock supports that are not the best! Thanks
@CKYew 2 жыл бұрын
Hi Steve, its a set of custom made side supports from someone who I came across on the forums in BadmintonCentral. He's called Michal Chudek so we've all just called it the "Chudek Supports". It's been really really good. I'm not sure if he still makes them but no harm googling him up and reaching out. Good luck!
@Bieffe Жыл бұрын
I'm trying to find the Yonex stringing guide u mention in the video. You mentioned you gonna provide the link but I don't see it. Thanks buddy.
@Deincrosse 3 жыл бұрын
Would you mind doing a video on how to replace grommets and the tools required?
@CKYew 3 жыл бұрын
Hi James, I do have a video on how I replace grommets on the rackets. It’s in the playlist here along with other stringing resources: kzfaq.info/sun/PL7iCVRDygUwDKK96dZiVr-4pRraRTS1q4 Let me know if you need any further help, always happy to answer questions, good luck!
@level27xrock 2 жыл бұрын
Thanks for all your videos. I am a stringer, but have never done badminton before. I got a request to do a badminton racket, and the customer gave me a pack of string, and he requested it to be done as a 1pc job. So I counted 11 mains for my short side and then left the rest on the other side to do the other 11 mains, and this racket has a 22 crosses pattern it looks like. The racket is MMOA, Ace Power 1101. I finished the 11 mains on my short side, and did the 11 mains on the other side and went into the crosses, but I only made it to cross number 12 before I ran out of string?? I didn't cut that much string off when I tied off the mains on the short side... I even picked up the string I cut off, and that gave me an additional maybe 5 crosses, I would have still been short. The pack of Ashaway ZyMax 66 Fire Power said 10M... I'm pretty confused why the string ran out. Maybe it was just a bad pack, or I am missing something with the way badminton is done compared to tennis/squash rackets that I am normally accustomed to... So I ordered two packs of Yonex BG66 UM for the customer instead to give to him, in case I run into the same problem, I will tie off the long side, and just do it as a 2pc job.
@CKYew 2 жыл бұрын
Wow, looks like there was something wrong with that pack of strings you received initially. A standard 10m pack would have a fair bit left over on a 1pc stringjob on a normal 22x22 pattern. Was the Zymax 66 Fire Power a sealed/fresh pack when you got it?
@level27xrock 2 жыл бұрын
Thanks for the Quick reply! It was a new pack, the customer gave me unopened still in the plastic. After I discovered I was short in the crosses, I reverted back and tied off the mains on the other side too. I then measured both the extra piece of string I cut off from doing the mains on the short side, and then the long piece of string that was left that I was supposed to do the crosses with. The piece from cutting off the mains on my short side was 3ft, 2 inches. The long left over string I was supposed to finish the racket with after doing the mains on the long side, was 6ft, 9 inches. I think I just happened to get a bad pack of shortly measured string. I felt bad so I told the customer what happened, and I ordered 2 packs of Yonex BG66 UltiMax string to use for him instead, is that a good string? Another thing, he requested his tension to be 26lbs, and from some videos I saw, they say they do tension on mains at one tension, and then increase the tension on crosses by 10% of main tension? Is that a good practice to do? Or should I just keep my machine at 26lbs for both mains and crosses?
@CKYew 2 жыл бұрын
It is weird that you've got a short pack of string. I'd certainly let Ashaway know that something has slipped through their quality control if I was you 😊. And yes, 66 Ultimax is a really good string although on the thinner side. I've done a string comparison video so maybe you can check that out if you'd like 👍. And yes, for isometric racket frames (square shape, not egg shape), its good practice and normal to add about 10% of tension on crosses. For me, if someone wants 26lbs in tension, I tend to go 25lbs on the mains, then 27lbs on the crosses. Good luck!! 👍
@level27xrock 2 жыл бұрын
Awesome, I'll check your video out! You got a great channel here, thanks for all the content you've put out
@emersonmanabat5193 Жыл бұрын
Got a question CK, why my 88D pro that was strung from HK looks like an egg shape? requested a 28lbs. Is it because the stringer put 28lbs in the main and 32+ in the cross? I compared to my 28mains and 29cross and its really different. Thanks
@CKYew Жыл бұрын
Egg shape? Is it quite excessive? Its like you said, potentially from quite a big tension difference between the mains and cross.. If it doesnt look right, get it checked and restrung.
@mohammedmalik805 Жыл бұрын
Hi there. I know this video is quite old but just seen it now. i have noticed that you started your crosses from the bottom going up the racket. Should it not be the other way round or does it not make any difference.
@CKYew Жыл бұрын
Yonex recommends starting from the bottom and I believe it’s the right thing to do because the bottom is slightly stronger than the top so it’ll withstand the imbalance of stress a bit better during stringing.
@aaronramirez4248 2 жыл бұрын
What happens when you put the main tie off on b9. And is it okay if I don’t follow the stringing pattern yonex provided for the astrox series
@CKYew 2 жыл бұрын
If you finish your mains on B9, where are you going to start your first cross? B10 and above? The only downside i can think of is warranty atm.
@aaronramirez4248 2 жыл бұрын
@@CKYew the cross started at b8 then looping to b9. And ends at a5.
@chunheiuwewong5971 2 жыл бұрын
Is it normal that the side supports need readjustment as you do crosses? Cause the racket frame do get smaller as I string
@CKYew 2 жыл бұрын
Not really, they dont normally need any further adjustments once the racket is mounted properly.
@ax00001. 4 жыл бұрын
may i now how much do you measure for your main string and cross string? if using such big package string. is it 5 times from right hand to left hand for main strings?
@CKYew 4 жыл бұрын
Hi J, it depends on a few things, the typical guidance is 5.5m for mains and 4.5m for crosses. But depending on this distance between the tension head on your machine to your turntable, you can save a fair few meters/stringjob if you measure it right. For example: i can get approx 22 string jobs/reel.
@albertchui8462 2 жыл бұрын
It depends how much the string stretches and tension applied. I noticed the Adidas Ubershall really stretches leaving alot of waste on a 10m pack. More string is used on 22lbs compares to 30lbs. Also it depends if you prestretch or not, 1 or 2 piece. 5m mains x 4m cosses is enough. For my own racket at I use 8.5m 1 string pattern, 0.63mm at 26lbs.
@vishwasgowda 2 жыл бұрын
Hello CK, I have recently gotten WISE 2086 Tension head, I am trying to string my racquet at 28 LBS, for that I am pulling mains at 27 and cross at 29 LBs, I am using two knot method to string my racquet, when I finish stringing my racquet the tension is about 25 LB's. I am not sure where I am doing it wrong, I would like to you point me in the right direction so I can try and see if the tension seems to be better. For example, My finishing knot is not good, I do loose tension on my last two rows at the top, same happens when I do 4 knot method. I greatly appreciate if your response and suggestions. Thank you
@CKYew 2 жыл бұрын
How do you know your finished tension is 25? I have also done a video on the knots I use so do check it out on my channel.
@vishwasgowda 2 жыл бұрын
@@CKYew By asking some of the experienced stringers about the tension, they say its about 25 LBS, and also some advanced players complain that tension is lower, thats how I know its lower than 28 LB's.
@CKYew 2 жыл бұрын
You can check if your WISE is pulling the correct tension by using a digital weighing scale. If its fine, then perhaps your clamps are slipping. Check to make sure they're not. And finally you mentioned about your knots, do practice and find what works best for your workflow. Good luck 👍👍😊
@mikeadvance6509 Жыл бұрын
Can you post the link to the side support clamps that you talked about in the video?
@CKYew Жыл бұрын
The side supports are custom made by someone called Chudek from the Badminton Central forums. If you google him, it'll show up :)
@kupfeli 2 жыл бұрын
Instead of using a flying clamp, you could swap the last two crossstrings, so first go through the last holes, then the secondlast holes, pull em both and you can use the normal clamps on the string you pulled. basically same mechanism as for the last two mains,but now you do it to get more tolerance for the clamps (dont need clamps for the last crosses, only for the secondlast crosses, as you pull that). Hope that helps.
@CKYew 2 жыл бұрын
Yeah, I do that for certain rackets 👍🏼
@ATELIERDUCORDAGE 2 жыл бұрын
There is something in my opinion that could make it even more consistent. It's about your crosses and it's the wayi do it on my tennis racquet wich is kind of the same technique except pulling the 2 las strings together. So the advantage of this technique is that you can pull 10% more on the knots and make it even everywhere. But if you use a starting know it won't be. The way I'm doing it is to block the first cross with a flying clamp, weave 5 or 6 crosses and then come back and pull with the same 10% on the cross or the first 2 of them? What do you think?
@anthonysnyder1777 Жыл бұрын
How do you deal with cross strings that twist or kink? Especially the thinner hybrids like Aerobite and Boost?
@CKYew Жыл бұрын
I try and pull them as slowly through as i can whilst pulling the kink side with a string puller to manage that.
@anthonysnyder1777 Жыл бұрын
@@CKYew thanks you. I’ve been trying that lately and it seems to work
@hugoxv11 Жыл бұрын
Hi, is there any reason why you don't use the diablo of your tension head ?
@CKYew Жыл бұрын
I found that because I raised the turntable and was able to get string to the gripper in a straight line, I didn’t need the diablo as there was no shearing or tearing of the string when I was pulling tension
@717hui Жыл бұрын
hi CK just want to ask how many years and roughly how many rackets you done on the 2086 tension puller? are they last ?
@CKYew Жыл бұрын
I’ve had 2 thus far and both have done thousands of rackets so they’ve been good to me 👌
@717hui Жыл бұрын
Thanks for replied
@lotannaoscar1521 3 жыл бұрын
Thank you Ck for the video. Is awesomly detailed. Please can you share video on how to string a Tennis Racket?
@CKYew 3 жыл бұрын
I'm glad you found it helpful. More resources here kzfaq.info/sun/PL7iCVRDygUwDKK96dZiVr-4pRraRTS1q4
@tobiashoeck1579 2 жыл бұрын
Hi there, I have been seeing your videos for quite some time and 1 year ago I started my own stringing journey... Yesterday I upgraded my old machine (Manual Pro's pro on a Pro's pro XP PLUS stand) by adding the wisehead 2086, but when I installed the 2086 I got some issues with driving the racket over the 2086. Do maybe know why this is, and if it can be fixed? Hope you understand my problem :)
@CKYew 2 жыл бұрын
Hi Tobias, I'm glad my videos were helpful towards your stringing journey! And yes, I believe I understand what you meant. You couldn't get 360 degrees rotation of your racket after installing the WISE2086 right?
@tobiashoeck5598 2 жыл бұрын
@@CKYew Yes exactly!
@CKYew 2 жыл бұрын
@@tobiashoeck5598 You have 2 options really. A: live with it. B: Install a base plate/aluminium/steel block below your turntable which raises it by around 2 inches to clear to gripper head.
@tobiashoeck5598 2 жыл бұрын
@@CKYew oh, do you know were i can such a block, i have never heard of it but it sounds like it will help! Thank you!
@CKYew 2 жыл бұрын
@@tobiashoeck5598 I'm not sure where you can get one but I got mine custom made from a workshop.
@ryancheung3467 Жыл бұрын
I want to learn how to string but don’t know where to start… how did you begin your stringing journey?
@CKYew Жыл бұрын
I've got a stringing course coming soon 👍
@danielhuang4755 Ай бұрын
hi CK, dunno if you'll see this but I was just wondering what is the purpose of coiling the string around the knob? thanks
@CKYew Ай бұрын
It’s to reduce the stresses on the string. But modern strings are very well manufactured and don’t often need it in my opinion if the string is in the straight line from the racket
@danielhuang4755 Ай бұрын
@@CKYew thanks for the response CK 🙏
@sirloinnn 2 жыл бұрын
Hello, i wanna ask, you pull string with main 28, cross 30. Is that 10% higher in cross method? But if yes, 28+10% = 31 yes? Not 30? Please explain thankyou
@CKYew 2 жыл бұрын
The general rule is 10% but it depends from stringer to stringer.
@sirloinnn 2 жыл бұрын
@@CKYew i seee, but i mean, 28 + 10% is 30,8. So it means cross 31 or 30?
@CKYew 2 жыл бұрын
It’s entirely up to the stringer. I know some do 30.8, some do 30, some do 31 😂
@laurencesyeng6182 2 жыл бұрын
@@sirloinnn Some people will do + 2lbs instead of 10%
@CKYew 2 жыл бұрын
That’s mainly on the crosses. Pre stretches are typically in %. Typically 5-25%
@syaffiq29 2 жыл бұрын
what's your taught on pre stretched the string?
@CKYew 2 жыл бұрын
It’s all down to personal pretences. Some players like it, some dont
@79Pavlito 2 жыл бұрын
Is hard to learn restring racket and also what is good budget friendly machine to buy ?
@CKYew 2 жыл бұрын
Its not hard but certainly do require patience and practice. I have links within the stringing videos on my channel. 👍 I'm currently developing a course so stay tuned 👍
@79Pavlito 2 жыл бұрын
@@CKYew anything you would recommend to start with as machine budget friendly
@CKYew 2 жыл бұрын
There are quite a few different types of machines and it all comes down to your budget ultimately. You can probably get an electronic machine for probably around £1k. Manual machines will be cheaper.
@itsmychanel5890 2 жыл бұрын
Sir I have a manual stringing machine how many types of badminton rocket holes please tell me.. I confused string holes...
@CKYew 2 жыл бұрын
The type of machine doesn't matter, they will all string fine. Check the racket manufacturer's sites for racket stringing instructions.
@itsmychanel5890 2 жыл бұрын
Thanks Sir
@noelangelodeleon5444 3 ай бұрын
where did you get the chudek side supports? cheers!
@CKYew 3 ай бұрын
From Chudek himself! 😂
@noelangelodeleon9118 3 ай бұрын
Can you share some useful link please? Keen on buying this from him. Cheers!
@englandutube5821 2 жыл бұрын
you looks like using prestreach function. Is that useful?
@CKYew 2 жыл бұрын
It depends on players. Some prefer it, some don't.
@richf1182 2 жыл бұрын
Do you wonder whether stringing in the garage, especially in the winter, makes a difference?
@CKYew 2 жыл бұрын
It’s the same difference as playing in a cold hall 😂
@richf1182 2 жыл бұрын
@@CKYew well, yes...so in order to play at the strung tension you need to play in a hall the same temperature as your garage 😁
@saurabhsinha5923 3 жыл бұрын
Please tell...Which brand's machine is this....and model name or number???
@CKYew 3 жыл бұрын
Heyyyy, this is a very similar machine to what I used in the video: a.racquetdepot.co.uk/home.php?id=395&url=154
@Andy-fo5fw 3 жыл бұрын
Hey CK Yew! I saw you commenting on Pro Stringer's video of their electronic badminton machine. In the future, I am thinking of buying a stringing machine. I want to buy Pro Stringer's Pro Platinum 2.0 electronic badminton machine. From the specification and the looks of it, would you say it has the necessary things for a beginner stringer?
@CKYew 3 жыл бұрын
hellooooo, I said "hi" on their video because they linked my video in one of their videos lol! To be honest, I've never used one of their portable stringing machines so I cannot comment on the ergonomics but perhaps a typical electronic tabletop or one with a base might be cheaper to start with for an absolute beginner?
@Andy-fo5fw 3 жыл бұрын
@@CKYew What would you recommend then?
@CKYew 3 жыл бұрын
@@Andy-fo5fw Perhaps something like this with 6 point racket mount support? a.racquetdepot.co.uk/home.php?id=395&url=154
@Andy-fo5fw 3 жыл бұрын
@@CKYew I actually like the way it looks and seeing the classic Wise 2086 make be want to buy it already haha. I'll save up my money to get this then. Thank you!
@CKYew 3 жыл бұрын
@@Andy-fo5fw I think its a decent starter machine. Very very similar to what I use in this video, especially the WISE tensionhead. Hope this helps and good luck!!
@carand40 2 жыл бұрын
Cuantos metros hacen falta para horizontales ?????? Y cuantos metros para las verticales ?????
@andrewmoore9588 2 жыл бұрын
What sort of price did your full setup cost?
@CKYew 2 жыл бұрын
This machine has had lots of changes to it throughout the years so it wouldnt be representative. Something similar nowadays would probably be around £800-1000?
@ebtourbillon 2 жыл бұрын
where can i buy this stringing machine?
@CKYew 2 жыл бұрын
My stringing machine has been modded lots over the years but something similar can be found here: a.racquetdepot.co.uk/home.php?id=395&url=97
@bubblebubble50 Жыл бұрын
Could you show us the right way to cut out broken strings?
@CKYew Жыл бұрын
👍
@BTzen 4 жыл бұрын
Would you please list all the tools used?
@CKYew 4 жыл бұрын
T T hi there, I’ve only used a string puller, thin nosed pliers, pair of Scissors and a starting clamp. Hope this helps.. good luck!! :)
@BTzen 4 жыл бұрын
CK Yew Hey, thanks for the quick reply! What’s the name of the stringing machine? Where can we buy that from? Also, where can I learn how do that knot? Anyway, thanks for the video :)
@CKYew 4 жыл бұрын
That’s a Pros Pro machine but adapted with a WISE 2086 electronic tensionhead. I’m not sure where you are based but there should be retailers online around your locality for badminton stringing machines. I’m doing a video for the knots soon, is there anything else that you would like me to clarify as well?? subscribe and you will know when it’s out!!! 😂😂 Thanks :)
@BTzen 4 жыл бұрын
Already subscribed:) not sure whether that machine is available in the US. Indeed, as a newbie, I still have a lot of questions lol
@CKYew 4 жыл бұрын
@@BTzen I'm sure similar machines would be available in the US. If you can send your questions to me in an email, I'll try and get them addressed in a future video. Thanks and Merry Christmas!!
@charlesyuen2541 Жыл бұрын
Can you please give some advice on how I can prevent the cross strings from twisting? When I pull it after putting it through the very first grommet, the whole slack just starts twisting and it becomes impossible to pull after the third/fourth cross.
@CKYew Жыл бұрын
Are you pre weaving and just pulling it through before tensioning?
CK Yew
Рет қаралды 119 М.
Badminton Stuff
Рет қаралды 429 М.
Audemars Piguet
Рет қаралды 25 М.
KK Sports
Рет қаралды 8 М.
Mark Sansait
Рет қаралды 69 М.
Олдскульник | Футбольник
Рет қаралды 1,4 МЛН
beIN SPORTS USA
Рет қаралды 1,4 МЛН
ВАСИЛЛА
Рет қаралды 666 М.