Stud Wall. Marking the Studs. Owner Builder Series. Ep 15.

Рет қаралды 19,034

9 жыл бұрын

#studwall #ownerbuilder #diyforknuckleheads
diyforknuckleheads.com Marking Out the Wall Studs. G’day Knuckleheads, Uncle Knackers here. In this Episode we look at marking out the wall studs. Making a stud wall is pretty straight forward but you just have to know a few basics first. This stud wall framing video looks at a few basic principles that will hopefully set you up to make your first stud wall frame. Check it out!
Before l go on...
DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
kzfaq.info
-------------
Tools l Use: diyforknuckleheads.com/tools-resources/
-------------
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
shop.spreadshirt.com.au/DIYForKnuckleheads/
------------
Check us out on Facebook;
DiyForKnuckleheads/
------------
ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
kzfaq.info/get/bejne/rK9hZqSbrZzLgas.html
Music supplied by Jason Shaw at www.audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short
Have a great day and l’ll see you again real soon. ☺
Cheers,
Uncle Knackers
Please Note:
All Videos produced by shaneconlan1's KZfaq Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.

Пікірлер: 138

@tingtingandping Жыл бұрын

Hard to find good Australian content for stuff like this in KZfaq. Love your work!

@diyforknuckleheads Жыл бұрын

Thanks Case! Glad you found it useful mate 👍😁🇦🇺🇦🇺🇦🇺

@jimhennes454 9 жыл бұрын

keep em coming. enjoy them. always had difficulty finding wall studs-even with your tips. thankl you.

@twentyonetwos3967 9 жыл бұрын

Guilty as charged! Great video mate.

@danielalvarez2279 9 жыл бұрын

Guilty as charged! Great video Shane. Thanks

@diyforknuckleheads 9 жыл бұрын

Daniel Alvarez Cheers Daniel and welcome to the club :-)

@jamishep 7 жыл бұрын

Excellent video Shane. Thank you

@diyforknuckleheads 7 жыл бұрын

Thanks Jamie

@jaylove8822 3 жыл бұрын

Absolutely fabulous ‼️ Thank you so much‼️

@diyforknuckleheads 3 жыл бұрын

No worries Jay....Glad you liked it and thanks for watching 👍🇦🇺😁

@JasonT76 9 жыл бұрын

Great one

@diyforknuckleheads 9 жыл бұрын

Jason Tilse Thanks Jason :-)

@jamesblanton9364 9 жыл бұрын

Awesome job again Shane, bloody good info mate. Looking forward to you're next vid knackers, so i spoze i'll cop ya then. Take care champ.

@diyforknuckleheads 9 жыл бұрын

James Blanton Thanks James. Have a good one mate. Cheers

@DiemenDesign 6 жыл бұрын

Thanks for providing the information in your video's. I'm in the process of working out materials for a Workshop build I"ll be undertaking soon, and your information is very helpful. On the subject of short pencils, my kids have a few colouring pencils that they used to throw out, but I've convinced them to save them, so I can make pencil pots by casting those short unusable pencils in resin, then turning a pencil pot on the Lathe for them, just an idea.

@diyforknuckleheads 6 жыл бұрын

Thanks D.D., glad you like the vids and the pencils in resin is a great idea! I've seen a few of those being turned on KZfaq and they turn out great. Cheers 👍

@wtabilltaw 4 жыл бұрын

Guilty as charged knackers 👷‍♂️

@PuffsDragon 9 жыл бұрын

Not guilty at this time your honor. A few years agoi redirected a bunch of pencils for Christmas. Tossed the sunnies and been using nice new ones.i will admit I have several sharpened and laying around.

@diyforknuckleheads 9 жыл бұрын

Michael Puffenbarger That sounds way to organised for me Michael :-) I need to take a leaf out of your book. Cheers mate

@PuffsDragon 9 жыл бұрын

im glad you understood what i said. looks like google changed some of my words. i really need to re read before posting.

@diyforknuckleheads 9 жыл бұрын

Michael Puffenbarger No dramas Michael

@Alpha-Alpha 9 жыл бұрын

All you need to do is to chop a 450mm piece of Timber and use it to mark on the studs. You don't need to measure and mark.

@MarshBryan 9 жыл бұрын

Guilty and sentenced!

@diyforknuckleheads 9 жыл бұрын

Marsh Bryan What was the sentence Marsh?? Banished to only using crayons for 6 months without parole :-)

@maresalatime 9 жыл бұрын

Guilty!! My wife's a teacher and hates when I steal her pencils lol. I drilled a hole at the bottom on one and glued a magnet in it. I put a light piece of sheet metal in my top pocket and boom! Pencil stuck to my shirt, mind you I still had to train myself to put it back on my shirt lol Great video!!

@diyforknuckleheads 9 жыл бұрын

Maresala Jnr Thanks Maresala. Good tip regarding the magnet! Thanks for sharing it. Cheers

@YouTubeCertified 9 жыл бұрын

No more "great tip, knackers!!!" It was annoyingly consistent & i kind of miss it. Ha ha Great vids "Uncle Knacker" i always enjoy them "mate" Also love that you give Americans like me the measurements in inches & feet; along with the Metric. Keep up the great vids. I'll be a KZfaq Certified Contractor in no time! LOL

@diyforknuckleheads 9 жыл бұрын

Jesusmuzik LOL Cheers mate.

@johns4821 9 жыл бұрын

How do you attach the new stud walls to the concrete flooring? Next video maybe?

@diyforknuckleheads 9 жыл бұрын

John Sorah Hi John. I attach the bottom plate to the slab using concrete nails that you bang in with your hammer. After that is done l insert dyna bolts through the bottom plate and into the slab next to each brace and to the edge of all windows and doors. Cheers

@blurrk9 9 жыл бұрын

Guilty 👍

@diyforknuckleheads 9 жыл бұрын

blurrk9 Welcome to the club Blurrk :-)

@stevecollins9450 9 жыл бұрын

Guilty. Well done video, Shane. Just FYI, in the US the bottom plate is sometimes referred to as the shoe, and the horizontal (noggen?) is called a cat.

@diyforknuckleheads 9 жыл бұрын

Steve Collins It's a pretty popular club Steve :-) Thanks for the info re the plate and noggin. Cheers mate

@MrBwest9376 9 жыл бұрын

GUILTY

@diyforknuckleheads 9 жыл бұрын

Ben West Welcome to the club Ben :-)

@michaelsewell3803 9 жыл бұрын

What's with the blue lumber??

@NaturaPug 9 жыл бұрын

Not guilty...but great tip knackers!!!!

@diyforknuckleheads 9 жыл бұрын

NaturaPug Thanks NaturaPug. Cheers

@debobba 9 жыл бұрын

Col . Next time your at your timber supplier , ask him or her or ? for free pencils . you have spent enough buying timber off them ..

@diyforknuckleheads 9 жыл бұрын

debobba Good call Debobba! I might just do that :-)

@woodturningjohn 9 жыл бұрын

Not Guilty, that's my story and I am sticking to it :)

@diyforknuckleheads 9 жыл бұрын

woodturningjohn Guilty people always plead innocent John :-)

@rosscoesmiff 9 жыл бұрын

Not only am I guilty on the pencil, but I keep putting them down and forgetting where I put them. I have heaps of them dotted around the shed.

@diyforknuckleheads 9 жыл бұрын

rosscoesmiff How frustrating is it ?? Cheers mate

@robertvanderzaan9681 9 жыл бұрын

Shane, may have been asked before, but the blue colour of the wood. Has it been treated some way? Over here in the Netherlands, outdoor wood for decks, etc. can be wolmanized and has a greenish colour. So what about the blue?

@diyforknuckleheads 9 жыл бұрын

Robert van der zaan Robert, the blue timber is treated for termite protection. It's compulsory over here. Cheers

@ayla8687 2 жыл бұрын

I might sound like a knucklehead asking this, but what happens when you get to the end and the stud spacing isn’t exactly 450mm? For example if you have a wall that is 2600mm long, there is an odd spacing at the end. Do you just leave it or would you recalculate your 450 centre’s to be something else?

@diyforknuckleheads 2 жыл бұрын

Hi Ayla....no such thing as a dumb question 👍.....No need to recalculate.....just leave it as it is.....just as long as it's not larger than 450. Hope that helps 👍😁🇦🇺

@northgork 3 жыл бұрын

So what do you do with "the required centers" once you have found them?

@diyforknuckleheads 3 жыл бұрын

The centres are what distance your main studs need to be apart. They can be closer but not further. The distance relates to the start of one stud to the start of the next stud.....hope that makes sense 👍

@maurocalcagnomontpilier9837 5 жыл бұрын

Hey mate.. What happens when you are building a wall frame and placing your studs every 450 mm but when you get close to the end of that wall the last space is less than 450 mm. Would you put on that last stud no matter how short the distance to the corner is?

@diyforknuckleheads 5 жыл бұрын

G'day Mauro, if the space is less than 450mm, you don't need to add in another stud. Good luck 👍

@kimshirley7014 9 жыл бұрын

Not typical here in the US where our plates are placed flat with the bottom plate a single board. I see your plates are placed vertical and doubled . Common sense would tell me that your process would make for a stronger structure. Your plates are built like laminated beams. I like the concept!

@albertkelly7129 9 жыл бұрын

Kim Shirley if i understand Shane right, he temporarily nails both the top and bottom plates together, so when he marks the stud distances hes doing both at the same time so they will match perfectly. when time comes to construct, he'll separate them so only a single flat top and bottom plate is left just like you guys do it.

@kimshirley7014 9 жыл бұрын

Gotcha ya... I was watching the video before I had my first cup of coffee this morning.

@diyforknuckleheads 9 жыл бұрын

Kim Shirley Hi Kim. Albert was spot on with his comment. Cheers and thanks for watching :-)

@diyforknuckleheads 9 жыл бұрын

Albert Kelly Spot on Albert. Cheers

@albertkelly7129 9 жыл бұрын

shaneconlan1 cant go wrong with your great tips Knyaaaaaaaaaaaaackers :)

@mylesevans3200 9 жыл бұрын

Guilty, but mine are permanent markers with flat tips they still write and mark fine but I have to hold them straight up and down... lol I use pencils when I can, i usually do sheet metal work for an HVAC company so pencils aren't as good on steel. Lol good videos I enjoy your work always simple and quality.

@diyforknuckleheads 9 жыл бұрын

Myles Evans Thanks Miles. It's amazing how such a simple thing such as a pencil or a permanent marker can cause such an inconvenience LOL Glad you like the vids. Cheers :-)

@diyforknuckleheads 9 жыл бұрын

shaneconlan1 Sorry Myles, spell check came back as 'Miles"

@mylesevans3200 9 жыл бұрын

Lol no problem happens all the time not a big deal! Cheers!

@roymay9758 9 жыл бұрын

Not guilty.....pencils are cheep......your lumber is green down under......good work / tip Shane/Knackers.....

@diyforknuckleheads 9 жыл бұрын

Roy May I know they're cheap Roy but l just keep forgetting to buy some. I'd write a list so l didn't forget but l can't find a pencil :-)

@jimmyobrien2384 8 жыл бұрын

I'm not guilty because I lose them before they get close to being that small

@diyforknuckleheads 8 жыл бұрын

+Jimmy Obrien Hahahahha

@MukYJ 9 жыл бұрын

Not guilty, but only because I'm trying out a mechanical construction pencil right now. Jury is still out on whether it's any good.

@diyforknuckleheads 9 жыл бұрын

MukYJ Oohhh that's a bit risky MukYJ. It' might be like using a bricklayers pencil. Virtually impossible to mark anything :-) Cheers mate

@alanpittman8700 9 жыл бұрын

i'm guilty lol just wondering whats up with the blue lumber? great job from a yank mate

@diyforknuckleheads 9 жыл бұрын

alan pittman Sorry to hear of your affliction Alan. Welcome to the club :-) The blue timber is a termite resistant wood. It's compulsory over here. Cheers mate

@ronstark1927 9 жыл бұрын

big guilty !!!!

@diyforknuckleheads 9 жыл бұрын

Ron Stark Glad l'm not the only one Ron :-)

@michaelwitte5544 9 жыл бұрын

Ikea $1 hotdogs and free pencils

@diyforknuckleheads 9 жыл бұрын

Michael Witte Looks like l'd better make the trip to Ikea. Pencils and hotdogs….no we're talking ! Cheers Michael

@yngwie66 9 жыл бұрын

What if your wall length is not a multiple of 450mm?

@albertkelly7129 9 жыл бұрын

Denis Minuz they are max spacings according to code iirc

@yngwie66 9 жыл бұрын

Albert Kelly Thanks Albert. So you can set the spacings at your own discretion as long as they don't exceed 450mm?

@muffinlavender4820 9 ай бұрын

Can confirm my wife also doesn’t like the size of my pencil😂

@diyforknuckleheads 9 ай бұрын

😂😂......same 😂

@DebbieNobodyneedstoknow1 2 жыл бұрын

Not guilty…..yet! ☺️

@diyforknuckleheads 2 жыл бұрын

Won't be long Debbie 😂

@DebbieNobodyneedstoknow1 2 жыл бұрын

@@diyforknuckleheads there needs to be a pencil finder! Lol! Mine is yellow, but so are the autumn leaves!

@bafman 5 жыл бұрын

Guilty!

@diyforknuckleheads 5 жыл бұрын

As charged, Your Honour 👍😂

@smilertiler1 9 жыл бұрын

Guilty (ish) I saw my new pecils in half so I have two pecils!!! I'm guilty of carrying my pencils between my lips because it's the only place I don't lose them!!

@diyforknuckleheads 9 жыл бұрын

***** Good idea mate…l probably still lose them though :-) Cheers mate

@paz2263 9 жыл бұрын

Guilty, i need help haha.

@diyforknuckleheads 9 жыл бұрын

pasquale Avocone I think you can find support groups in the local phone directory :-)

@BRAVITS 9 жыл бұрын

Guilty

@MartyDaley 9 жыл бұрын

Would like me to organise a box of DIY For Knuckleheads carpentry pencils for you mate? They would sell like hot cakes - Lol :-)

@diyforknuckleheads 9 жыл бұрын

Marty Daley I reckon they would too mate :-) The trouble is, l'd probably lose them LOL. Cheers mate and thanks for watching.

@desw20 9 жыл бұрын

Guilty, IKEA pencils.

@diyforknuckleheads 9 жыл бұрын

Des Wheelock My sympathies Des. Join the club mate :-)

@jamishep 7 жыл бұрын

Why are carpenter's pencils that shape? Is it because most carpenters don't have enough fingers to hold a normal pencil? :-)

@diyforknuckleheads 7 жыл бұрын

LOL

@davidneyle807 5 жыл бұрын

If using 90 x 35 studs the technique for creating external corners doesn't work. But most competent persons should be able to work out what is required to make it work.

@veronica5896 9 жыл бұрын

Guilty =)

@diyforknuckleheads 9 жыл бұрын

Veronica Welcome to the club Veronica :-)

@benfriederich3016 6 жыл бұрын

Guilty :-)

@diyforknuckleheads 6 жыл бұрын

Join the club Ben 👍😁

@Bentay15 9 жыл бұрын

Not Guilty! Happy to send you 5 new pencils if you dump all your old pencils!

@diyforknuckleheads 9 жыл бұрын

Ben Taylor That sounds like an offer to good to refuse Ben :-)

@Bentay15 9 жыл бұрын

shaneconlan1 ok where should I send the pencils?

@diyforknuckleheads 9 жыл бұрын

Ben Taylor Thanks for the offer Ben but l should be alright mate :-) Cheers

@MrNineholes1 9 жыл бұрын

Guilty! What is it with pencils, the first 4 inches disappear in what feels like seconds, the remaining 2 inches last forever!

@diyforknuckleheads 9 жыл бұрын

MrNineholes1 MrNineholes…..that has got to be one of the best questions ever!!! I think it needs more investigation. The fact is, is that it is true!! Cheers mate

@georgegibb6697 8 жыл бұрын

Guilty, but at least I can allways find one, as no one pinches my pencils on-site..............

@diyforknuckleheads 8 жыл бұрын

+George Gibb George, l think pencils are like stubby holders (beer coolers), you never seem to have your own :-)

@exotoguy 9 жыл бұрын

My problem is even finding the pencil at all...

@diyforknuckleheads 9 жыл бұрын

Aaron P How frustrating is it Aaron????

@markblue777 9 жыл бұрын

Guilty.

@diyforknuckleheads 9 жыл бұрын

markblue777 :-)

@grumpy_poo 9 жыл бұрын

Not guilty... use the kids chubby type coloured pencils ..... shhhhhh say nowt!

@diyforknuckleheads 9 жыл бұрын

grumpy poo I might have to raid the kids pencil case in the morning :-) Cheers Grumpy poo.

@edwardcawley4681 9 жыл бұрын

Guilty lol

@diyforknuckleheads 9 жыл бұрын

edward cawley Welcome to the club Edward :-)

@kayakid2000 9 жыл бұрын

I lose my pencils faster then I can sharpen them soooo not guilty

@diyforknuckleheads 9 жыл бұрын

kayakid2000 LOL

@3amsaint 9 жыл бұрын

The first opening is wrong. You need to mark 450+ half the stud material then mark back off the mark.

@waynesmith5738 9 жыл бұрын

guilty

@poppygmuff 9 жыл бұрын

Guilty...

@diyforknuckleheads 9 жыл бұрын

Peter Garland You're joining a long list Peter :-)

@acamarks 8 жыл бұрын

guilty... and taking forever to sharpen them

@bobnlouie 9 жыл бұрын

Yep, guilty.

@michaelsewell3803 9 жыл бұрын

What's with the blue lumber??

@diyforknuckleheads 9 жыл бұрын

Michael Sewell It's a termite treatment Michael. Cheers

@TheLittleGardenShedWorkshop 9 жыл бұрын

Guilty

@diyforknuckleheads 9 жыл бұрын

The Little Garden Shed Workshop My sympathies Harry :-)

@thomaskerr1019 8 жыл бұрын

guilty

@diyforknuckleheads 8 жыл бұрын

+Thomas Kerr Welcome to the club Thomas :-)

@shaneelson 9 жыл бұрын

Guilty

@diyforknuckleheads 9 жыл бұрын

shane elson My sympathies Shane :-)

@bartbug1 4 жыл бұрын

Guilty

@diyforknuckleheads 4 жыл бұрын

Join the club Mate 😂

@zipperrrrr 9 жыл бұрын

guilty

@diyforknuckleheads 9 жыл бұрын

zipperrrrr Join the club Zipperrrr :-)