Turning up a .22 barrel for the Anschutz 9015

Рет қаралды 178,260

Күн бұрын

HI guys in this one we machine up a .22 barrel for an Anschutz 9015, we machine the breach end, then crown the end of the barrel.
Merchandise: personalised.clothing/sub12ai...

Пікірлер: 90

@michaelbeavis6634 Жыл бұрын

A very nice bit of machining again, so good to see people who have pride in there work. Well done and a pleasure to watch

@sub12airgunners Жыл бұрын

thank you 👍

@paulspeller968 Жыл бұрын

i would agree there mate . i think the crown looks very tidy like that 👍 excellent job . interesting he wants a 22 for target work . please do do a follow up on this one as i would like to see how he gets on for sure

@sub12airgunners Жыл бұрын

thank you 👍 yes i think he just wants to see how it compares, but we will do something on the results👍

@Tim_Bassett Жыл бұрын

It'll be interesting to see how the .22 barrel works out. Really nice machining video and gives a non engineer (me) and insight into what really goes on in the machine shop 🙂

@sub12airgunners Жыл бұрын

thanks Tim 👍

@eddienuttall2485 Жыл бұрын

Excellent and interesting as always👍👍 keep ‘em coming, could watch them all day. Super skills.

@sub12airgunners Жыл бұрын

thank you 👍

@tomthompson7400 Жыл бұрын

Nice to see someone taking detail seriously ,,,, great job.

@sub12airgunners Жыл бұрын

thank you 👍

@phillipward4862 Жыл бұрын

I've watched quite a few of you uploads very very interesting to watch and pure engineering genius and amazing finish to all your end projects. Outstanding

@sub12airgunners Жыл бұрын

thank you 👍

@riyadiyusuf8661 Жыл бұрын

M""

@David-er3jy Жыл бұрын

Kudos for being thorough!

@sub12airgunners Жыл бұрын

thank you 👍

@casperboo5465 Жыл бұрын

Fantastic work as always Jeff, top notch Cheers 👌👌👌👍👍👍👍👍👍

@sub12airgunners Жыл бұрын

thank you 👍

@martinhart1798 Жыл бұрын

Interesting as always chaps ,great quality work .

@sub12airgunners Жыл бұрын

thank you 👍

@three-phase562 Жыл бұрын

Nice tidy job with the machining. 👍Interesting move to 22 for target shooting, that will likely get some frowns. 😁😁

@sub12airgunners Жыл бұрын

Yes will be interesting how he gets on with it, and the reaction he gets😂

@iangoodsell3257 Жыл бұрын

Excellent job Jake

@sub12airgunners Жыл бұрын

thank you 👍

@simontanner Жыл бұрын

Yet another excellent video 👍🏻

@sub12airgunners Жыл бұрын

thank you 👍

@neilcooke1475 Жыл бұрын

Amazing top Quality workmanship 👌 I'm trying to get a longer barrel made for 9015 to try a bit of benchrest. Still searching 😥

@sub12airgunners Жыл бұрын

thanks for watching

@edkcustoms 4 ай бұрын

Excellent video as usual! But im wondering what insert type you are using, it looks like a longer dcmt insert. Seems to give a beautiful finish. Could you share the insert's name?

@TheWhittleGreenVanUK Жыл бұрын

is there ay reason that you prefer the spider chuck in the 3 jaw over the use of a 4 jaw? is it for the length of grip, as adjusting over 4 points o each of the 2 axis dose allow for a lot of movement a sideways twist

@sub12airgunners Жыл бұрын

as you say it just gives more adjustment than the 4 jaw 👍

@fish4london48 Жыл бұрын

Is that a Dremel speed click for doing the crown ? those little cut off wheels are expensive for what they are, but i guess very practical for this application in keeping everything true.

@sub12airgunners Жыл бұрын

well spotted, yes it is they work a treat for this job 👍

@columbo1966 Жыл бұрын

Nice work!

@sub12airgunners Жыл бұрын

thank you 👍

@samuraidriver4x4 Жыл бұрын

This video popping up in my youtube suggestions makes me excited to get working on my big bore crossman 2240/2250 project again. Always enjoyed working on airguns but it's been on hold for a while due to circumstances. Have you tried using a gauge pin in the rifling to dial it in?

@sub12airgunners Жыл бұрын

thanks for watching, yes have done it that way before it works just as well 👍

@chrisfigueroa3361 Жыл бұрын

Awesome work thanks for sharing bsafe buddy 👍

@sub12airgunners Жыл бұрын

thank you 👍

@bashm5767 Жыл бұрын

Very interesting video as expected👍🏼

@sub12airgunners Жыл бұрын

thank you 👍

@dironizareyes596 7 ай бұрын

Great video, do you have any experience with the sig mcx virtus air rifle barrel. This Airgun gives me 2 different groups within 10-15 consecutive shots. I’m trying to figure out why the rifle groups horribly

@sub12airgunners 7 ай бұрын

not had one apart yet but with this sort of problem it's a case of going through it bit by bit 👍

@dironizareyes596 7 ай бұрын

@@sub12airgunners I hope you can get your hands on one and investigate why. Many owners if not all have this problem. Must be something that owners can do to improve it . I can try to explain the setup briefly. On the 177 mcx and mcx virtus 22 it’s fed into the Airgun by a mag with a belt , with every trigger pull the belt/ plastic chain rotates and lines up internally with the barrel. Then as the trigger is pulled a hammer hits the air chamber valve and a burst of air hits that pellet and pushes it through the barrel, but right before the barrel is a small (breech piece) like a nozzle that is maybe half a mm bigger than the circumference of the pellet. After shooting the pellet into a 25 gallon water trash bin to capture the pellet I can see there’s a smear on one side of the pellet as if it’s not traveling through the barrel straight or evenly. Do you think it’s possible you can get your hands on one. I was thinking maybe putting a inexpensive slightly better barrel like crosman 2240 and if it could be improved a Fx barrel

@markhomer5704 Жыл бұрын

Genius ... period ...

@sub12airgunners Жыл бұрын

Thank you 👍

@PaulSmith-jr1qe 2 ай бұрын

Hi, I know you do quite a few re-barreling videos and wondered if you know where I could get a .177 Match grade stainless steel heavy barrel for use on a bench rest rifle.

@sub12airgunners 2 ай бұрын

hi sorry we do some but not done a ss one yet, we use chambers for the LW barrels and Bagnal & Kirkwood for all the others. We have used a few FTP 900 barrels but i think they are plated not ss so just look like ss

@mrfancypanzer549 Жыл бұрын

What sort of steel is that? it seems to machine very well.

@sub12airgunners Жыл бұрын

it's just mild steel 😁

@russhumphries7283 5 ай бұрын

So to follow up on this one - how did it end up from a BR option? Great videos as ever, thank you

@sub12airgunners 5 ай бұрын

it has been tested and the verdict was it was good but not good enough for br comps ☹ i think we are going to try another barrel at some point as they are all different 😀

@russhumphries7283 5 ай бұрын

Thank you @@sub12airgunners

@geetee50 Жыл бұрын

hi Jeff ive converted my walther barrel on my 500 thats now 4 inches shorter and groups around 15mm at 45yrds but would love to put an Anschutz .177 on it for fun just to see what it can achieve. where do you buy these blanks or do you have any for sale? im local to petes

@sub12airgunners Жыл бұрын

the Anschutz barrel is off our own 9015 the one we machined up is a LW i believe, but the blanks we do get come from chambers 👍

@geetee50 Жыл бұрын

Thanks

@venanciochaves1103 Жыл бұрын

what is the diameter of this barrel? It looks pretty robust. I would say it's about 19mm?

@sub12airgunners Жыл бұрын

yes it is a meaty barrel 18mm 👍

@lisawood516 Жыл бұрын

Great Vid. 😊😊

@sub12airgunners Жыл бұрын

thanks for watching 👍

@gregophilip6858 Жыл бұрын

nice work

@sub12airgunners Жыл бұрын

thank you 😀

@markjohnson2166 Жыл бұрын

As usual, awesome engineering.

@sub12airgunners Жыл бұрын

thank you 👍

@moulanaabdoolsahib4385 11 ай бұрын

What material are you using for the barrel? Do you use the same type of material for a 9mm, 45ACP and 7.62mm AK Round?

@1alstevens 10 ай бұрын

Hi Jake,Al Stevens from airgunforums. Could you please tell me the make/model number of that s/p thread cutting tool please. Where did you get it? Thank you, Atb,Al.

@sub12airgunners 10 ай бұрын

Hi, we get them from cutwel and it's simtek e3 grooving threading tool

@1alstevens 10 ай бұрын

@@sub12airgunners Thank you👍

@vibram500 Жыл бұрын

Cool job! Is it possible to share your thread tool reference please? Thank you

@sub12airgunners Жыл бұрын

Hi we use a simtek TE3 16 16 insert 20 tpi full form 👍

@uksnusreviews9455 29 күн бұрын

I now own that barrel 🤣

@sub12airgunners 21 күн бұрын

👍

@jeffhello1444 Жыл бұрын

👍👍

@sub12airgunners Жыл бұрын

👍

@albertojalrab5861 Жыл бұрын

Can You make 2 750mm Barrels for my Fx Impacts M3 4.5mm and 5.5mm...?? Let me KnoW please...

@sub12airgunners Жыл бұрын

Hi sorry we don't do work for people, we just do ours and some good friends guns 🙁

@birddogg3270 Жыл бұрын

Must be Jasons barrel .ill be interested to see how he gets on with it.

@sub12airgunners Жыл бұрын

yes i am interested to see 👍

@markjohnson2166 Жыл бұрын

When is the BRK Ghost coming ? :)

@sub12airgunners Жыл бұрын

It's been on order for about 5 weeks now so hopefully soon 👍

@user-nk5un6ye3l Ай бұрын

Đến hôm lay tôi mới biết kiến thức của ban

@sub12airgunners Ай бұрын

👍

@user-rb7su2ni9q 11 ай бұрын

真好看

@sub12airgunners 11 ай бұрын

😀

@swamper2fly Жыл бұрын

I want to see some grouping.

@sub12airgunners Жыл бұрын

as soon as the chap dose some testing i will post the results

@ste6004 Жыл бұрын

Thumbs down at the end?😉🤔😂

@sub12airgunners Жыл бұрын

😂😂👍

@viktorpakhaliuk6817 Жыл бұрын

@harrishamidan4352 Жыл бұрын

Aku Pon Klau Ade Mesen car tank aku buat....

@harrishamidan4352 Жыл бұрын

Hang Ade Mesen boleh le hang cakap gampang