Subaru DOHC Timing Belt Kit | STEP-BY-STEP Guide

Рет қаралды 143,147

4 жыл бұрын

Subaru DiY walk-through of the install steps for a new dual overhead cam (DOHC) engine timing belt kit with new pullies on a EJ205 engine (used in the 2002-2005 USDM WRX). However, this video tutorial will also apply to a wide-range of other Subaru DOHC engines. I also demonstrate how to use one of the SPECIALTY CAM TOOLS to install the timing belt, which makes this job much easier and quicker - LINK BELOW!
🔹 CAM TOOL - www.amazon.com/shop/subaruonl...
This video is part of a "Build Series" (see "Playlists" tab for all videos) for my 1998 Rally Blue Pearl RSTi Coupe (Impreza 2.5RS swapped with a EJ205 turbo engine), which is 1 of only 720 sold in the USDM for 1998. This RSTi Build has come a long way and includes a full archive of videos documenting how to: (1) Pull a EJ-series turbo engine, (2) Replace the head gaskets, (3) Add key upgrades to increase long-term reliability, and (4) Restore the interior to OEM specifications.
*2020 UPDATE: After working as a professional Hydrogeologist for 15 years, I've decided to embrace the reward I've found in creating KZfaq content, my passion for competitive Motorsports, and building relationships with all the people and small businesses that make these communities work. I'M GOING FULL-TIME as a KZfaq Creator starting Dec 2020! Hope you'll join me on this journey into the unknown!
SUPPORT THE CHANNEL: If you enjoy the original Subaru content I create for this channel, or find value in the Subaru-related technical resources I provide at www.SubaruONLY.com (PN tables, FSM database, and categorized links to SubaruONLY KZfaq Content), or would like to help for any reason, please SUPPORT THE CHANNEL!
➤ SUBSCRIBE to the Channel (and turn Alarm Bell "ON")
➤ LIKE and COMMENT on every video (helps YT algorithm!)
➤ SHARE these videos (if you liked it, others will too!)
➤ Use the SubaruONLY AMAZON Shop (see links below!)
-------- SubaruONLY AMAZON SHOP --------
Storefront - www.amazon.com/shop/SubaruONLY/
➤ SHOP BY IMPREZA GENERATION:
➤ 1993-2001 - www.amazon.com/shop/subaruonl...
➤ 2002-2007 - www.amazon.com/shop/subaruonl...
➤ 2008-2014 - www.amazon.com/shop/subaruonl...
➤ 2015-2020 - www.amazon.com/shop/subaruonl...
➤ SHOP BY FORESTER GENERATION:
➤ 1998-2002 - www.amazon.com/shop/subaruonl...
➤ 2003-2008 - www.amazon.com/shop/subaruonl...
➤ 2009-2014 - www.amazon.com/shop/subaruonl...
➤ 2015-2020 - www.amazon.com/shop/subaruonl...
➤ SHOP BY PART TYPE:
➤ BRAKES - www.amazon.com/shop/subaruonl...
➤ FUEL SYS - www.amazon.com/shop/subaruonl...
➤ HEAD GASKET - www.amazon.com/shop/subaruonl...
➤ IGNITION - www.amazon.com/shop/subaruonl...
➤ LUBRICANTS - www.amazon.com/shop/subaruonl...
➤ SUSPENSION - www.amazon.com/shop/subaruonl...
➤ TIMING SYS - www.amazon.com/shop/subaruonl...
➤ TOOLS - www.amazon.com/shop/subaruonl...
➤ TURBO SYS - www.amazon.com/shop/subaruonl...
➤ MISC. PARTS - www.amazon.com/shop/subaruonl...
➤ COOL STUFF - www.amazon.com/shop/subaruonl...
-------- SubaruONLY LINKS/CONTACT --------
🔹 KZfaq - / subaruonly
🔹 Website - www.SubaruOnly.com
🔹 Facebook - / subaruonlyshop
🔹 Instagram - / bk3xrghf5ln
🔹 Email Me! - SubaruOnlyShop@gmail.com
THANK YOU!
~ Luke 👊
#subaruonly #GC8 #RSTi

Пікірлер: 298

@aaronfredsberg7275 4 жыл бұрын

thank you for the best Subaru content on youtube, your videos help me a lot. one day soon this channel is gonna explode.

@SubaruONLY 4 жыл бұрын

Thanks man!!! Awesome feedback! Trying to make the BEST diy videos for our Subie fam. 😁😁😁

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@JamesCT153 3 жыл бұрын

@@SubaruONLY your videos are seriously the perfect companion when trying to do this myself. Thanks for always including the torqe specs!!

@SubaruONLY 3 жыл бұрын

Awesome - glad it helped, cheers buddy!!!

@oldchev2850 2 жыл бұрын

All bolts 28.9 ft/lbs but little idler is 18.5 ft/lb. Gap between belt and guide is 1mm which is 0.040” (40 thow) not 20. Loctite 243 is not studlock and is used where you can still remove bolts with normal tools but it prevents loosening due to vibration. Supposedly it’s not required though. Great video and not filmed at night which is a plus.

@SubaruONLY 2 жыл бұрын

Hahaha, thanks. Guess lots of people film at night. Thanks for the support!!!

@joshfiskel603 2 жыл бұрын

It was the most terrifying start up I’ve ever had but it worked. I can’t thank you enough

@SubaruONLY 2 жыл бұрын

Nice - glad it worked out!!!

@Pccpy Жыл бұрын

This is the most informed, well explained, and best Subaru timing belt video out there. After this, even my grandma knows how to change Subaru timing belt. Thank you.

@seansmith3299 2 жыл бұрын

Just got my first Subaru and you have had great content to just binge and learn. You’re awesome!!!!

@stevenireland8647 4 жыл бұрын

Did the water pump and cambelt kit watching this video. Perfect to follow. If you already have experience you will have no dramas.

@k.c4931 3 жыл бұрын

Man, I’ve watched a few videos of this job and the speciality tool makes it way easier. Gonna do this job coming summer and this video will definitely be my guide. Great content. Your oil pan videos are sick too.

@SubaruONLY 3 жыл бұрын

Thanks man!!! Much appreciated!!! 👊

@Abaddavid420247 4 жыл бұрын

Thank you for all your videos! Just did the timing belt on my 06 legacy and your videos helped me a lot! Also installed a getadomtune cooling mod. Thanks for explaining the cylinder 4 cooling flow problem so thoroughly! Cheers!

@SubaruONLY 4 жыл бұрын

For sure man. Stoked it helped!! Cheers! 🤙

@harrisonmorin616 4 жыл бұрын

Thanks for all the info you give I cant wait to start building my own forester XT! I'll definitely give credit to the subaru god

@benedictoflores3926 2 жыл бұрын

Love the extra details for the install. Good video man.

@marioshimabukuro9435 Жыл бұрын

I m from Argentine. I have a impreza wrx ej205, watching this video I could made the special tool to timming belt. Thanks.

@cramdangle Жыл бұрын

Please keep up the Subaru content. These videos will be relevant for a long time

@Rayzer303 4 жыл бұрын

This gives me the confidence to do this myself...Sitting @ 81k right now but thanks this is very informative.

@brettpylipow9334 2 жыл бұрын

I cannot express how appreciative of your videos. Incredibly clear and precise; thank you!

@SubaruONLY 2 жыл бұрын

Thank you! 👍

@scottishlyscubaru145 3 жыл бұрын

Thanks for your vivid and meticulous videos. I’ve always been interested in Subaru’s and I finally have the opportunity to say I own one. Keep making these videos. Highly appreciated, I’m also a DIYER.

@SubaruONLY 3 жыл бұрын

Thanks! 👊

@zacharyt9400 4 жыл бұрын

Thanks a lot for all these videos. By far the most detailed and quality videos I have seen.

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@nerfsbest 3 жыл бұрын

Very clear instructions and very informative! Awesome video! Thanks

@SubaruONLY 3 жыл бұрын

Awesome. Cheers and Happy New Year buddy!!!

@Mr69barracuda 2 жыл бұрын

GREAT video ~ confirmed EVERYthing I already knew CLEARLY. Gonna Follow you for that.

@nathanacuna 4 жыл бұрын

Very good detailed video Luke! Ill definitely be buying that cam holder tool when the time comes!

@SubaruONLY 4 жыл бұрын

It’s a good investment in my opinion. 👍

@davidwilson2758 3 жыл бұрын

That's the best detailed information ive seen of changing a timing belt replacement of a ej motor, Thankyou.

@SubaruONLY 3 жыл бұрын

Hell yea, stoked to hear!!!

@nevillehylton7350 Жыл бұрын

I like your explanation on the belts change very good work.

@Jerry-ml3iy 4 жыл бұрын

Loves your video! Helps a lot for my first engine build ! Good job man .

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@Pje3ski 3 ай бұрын

Best video I have seen on this. Thanks for taking the time to make it

@SubaruONLY 3 ай бұрын

Glad it helped. Thanks for taking the time to comment - cheers buddy!!! 👊

@IOWPCV 4 жыл бұрын

Actually a good guide !

@alivia4907 10 ай бұрын

I wish I knew that I needed the cam stop tool b4 I started. I did it without the tool but you really helped me out with the belt guides. I kept getting the timing wrong until I took them off. Definitely not easy but you helped me out. Thanks for the video

@daniel4u2c92 Жыл бұрын

thank you for taking your time to make this video its was very helpful

@dkheke Жыл бұрын

Very informative video, well explained and feel more confident doing my son's cambelt on his 96 Bg Subaru legacy. Learnt alot Thanks.

@joaquinaguirre2976 2 жыл бұрын

HI, I really appreciate all the info in your videos, thank man.

@digitalbilly 3 ай бұрын

Yo I learned alot from you and your saving me tons of moola thanks!!!!

@deancook6810 3 жыл бұрын

Thank you for this I actually thought it would be impossible for me but wow its actually quite simple thanks to your guide 😊

@SubaruONLY 3 жыл бұрын

Love to hear. Cheers!!!

@tpcoachfix 3 жыл бұрын

Excellent video. I love the tools to hold the left side timing sprockets.

@SubaruONLY 3 жыл бұрын

Me too, used to use wrenches and a vice grip clamped down, so much better with this little tool!!! 👊

@theronsmith8244 Жыл бұрын

Thanks for your video step-by-step sharing

@princekampiru 2 жыл бұрын

your demonstrations are very helpful

@SubaruONLY 2 жыл бұрын

Thank you!!! Much appreciated!!! 👊

@bennybuilds328 4 жыл бұрын

Your intonation is something that I have to get used to, but the videos are amazing.

@SubaruONLY 3 жыл бұрын

Glad you like them!

@TizonaAmanthia 3 жыл бұрын

Thanks again for the help, I'm gonna subscribe, so I can get the help I need in the future, for keeping my new subaru happy.

@SubaruONLY 3 жыл бұрын

Hope so - cheers!

@joseluisoliva3199 2 жыл бұрын

Excellent ! very educational!

@AlexReiter1988 20 күн бұрын

So much good information, I'm currently trying to remove my water pump. And have to remove the timing belt. And might as well change the timing belt.

@NoGoodCREeP 2 жыл бұрын

Man what a life saver 🙌🙌🙌 thanks for making this video

@SubaruONLY 2 жыл бұрын

Awesome. Glad it helped!!! 👍

@bernardodelacruz4827 2 жыл бұрын

Very good step by step procedures on timing belts process nice men❤️✌️

@SubaruONLY 2 жыл бұрын

Thanks buddy - cheers!

@rallitart 6 ай бұрын

I ordered your kit after watching your video. Cheers

@SubaruONLY 6 ай бұрын

Nice! Cheers and Happy Holidays!!! 👊

@tankster_749 14 күн бұрын

Thank you for this information I’m about do this to my 2005 Subaru legacy wagon 2.5gt

@juanruano735 3 жыл бұрын

Thank you for all the knowledge, I will do the same to my 2007 Subaru Impreza

@SubaruONLY 3 жыл бұрын

Happy it helps. Cheers!

@bobbylittle9223 5 ай бұрын

Been looking for this video for weeks lol

@SubaruONLY 5 ай бұрын

Hope it helps! Cheers 🍻

@samster978 4 жыл бұрын

how do you not have more subscribers! Thanks and keep the detailed vids coming.

@SubaruONLY 4 жыл бұрын

Thanks man! Definitely gonna be making some vids soon. stay tuned. 😁😁😁

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@rjbrennanjr 2 жыл бұрын

I do work on high-performance cars and aircraft. Your videos are incredibly thorough and efficient - you don't waste time, but nothing is skipped. Exactly what I need to get work done without wasting time and making mistakes. Impressive. Keep making these videos, they are invaluable. I wish you worked on aircraft engines, too . . .

@SubaruONLY 2 жыл бұрын

Haha, I’ve always been interested in aircraft design too. Maybe someday. Never know. Cheers and thanks!!!

@jurotztv7302 3 жыл бұрын

Thank you for sharing this video very helpful nice tips.

@SubaruONLY 3 жыл бұрын

Sweet!

@danglukinich4134 6 ай бұрын

Super helpful thanksssyouuuu

@derrickgarcia303 2 жыл бұрын

Thanks for sharing!

@SubaruONLY 2 жыл бұрын

👍

@beetlejuice1239 4 жыл бұрын

Underrated channel.

@SubaruONLY 4 жыл бұрын

Thanks buddy!!! 👊

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@zaneunique1215 4 жыл бұрын

Thanks for the information , excellent presentation . Do you advise changing the water pump when you change the belt?

@dany7425 Жыл бұрын

The best ever explanation i ever seen can you please do one for the ej257 ?

@stefmechgarage 4 жыл бұрын

Thanks for all the info!!!!

@SubaruONLY 4 жыл бұрын

You know it - happy to share what I got :)

@billm7315 3 жыл бұрын

By the way I do like your detail instructions

@kendrickwilliams3696 2 жыл бұрын

Awsome thanks for the info

@shaking1974 2 жыл бұрын

Great video and helped me out a lot, But I have an issue, I'm currently doing my timing belt and all was going well until the thread stripped on the tensioner Pulley, any suggestions?

@LuxxyHD 4 жыл бұрын

Before putting the belt in make sure to mark the side of the belt, makes it easier to see if the belt marks line up with the cam gear and definitely turn over the the engine by hand until the cam marks line up not the belt

@Subieej20 9 ай бұрын

Do I turn the engine over before I pull the pin or after?

@Satyaprakash56 4 жыл бұрын

Very nice

@happytrails7179 3 жыл бұрын

Freaking awesome! Thank you.

@SubaruONLY 3 жыл бұрын

Sweet! Cheers!

@rudyv1891 Жыл бұрын

I just "stumbled" onto this video. Damn. My 7th gen civic is a walk in the park compared to this. Good to see different timing belt changes on diff cars.

@danz1910 11 ай бұрын

Thanks brother

@henryharrison8005 Жыл бұрын

Thanks for taking the time to make these great videos. By the way, you've got a little bit of Christopher Walken going on there.

@WahooNo2 4 жыл бұрын

I never got the cool timing belt spacer tool in my gates kit. But you can make a spacer tool by taking one of the thin cardboard boxes that the new pulleys come in and cut a strip with scissors then fold it over once. This will oddly be about 1mm in thickness which you can verify with a caliper / micrometer if needed. I haven't gotten the cam holder tool yet, but you can hold the cams in place with 2 breaker bars and 10mm hex sockets. One pain in the butt thing is if your car has single or dual avcs (ej 255 or 257 depending on the year). It is because the cams may not line up exactly like the non avcs engines. The cams may slip back like you say in your video and it does that very quickly and can slice your hands up because you are essentially trying to balance an egg on its top which is compressing the valves open.

@youngxlos 2 жыл бұрын

Awesome guide! Could you make a video on how to bleed the hydraulic tensioner? To make sure there is no air bubble I bought on from Subaru and wanted to make sure I don’t have air bubbles in mine

@brysonfitch5065 2 жыл бұрын

Thought you might’ve pulled some threads on the upper right 12 mm pulley bolt pretty positive it’s 18.1 foot pounds and you mentioned in the video that it’s 28.9 got lucky!

@tirapedo76 4 жыл бұрын

Will be doing this very soon will def get the tool , I might also have to replace the cam seals any tips on getting the cam gears off, also considering co 23 tools to get that job done this will be done with the engine in the car. Love the videos great stuff.

@SubaruONLY 4 жыл бұрын

Thanks man! It’s pretty easy with that tool. I used to do it super ghetto and use two Allen keys strapped together, or just tried to do it and had the cam gear snap back on my over and over. 🤣🤣🤣

@lainhensley771 Жыл бұрын

So great to see your channel. I am in Chico. Are you in the area? My son and I have been working on his Impreza WRX 2009 and we can't get it running. We need help. I would love your perspective.

@ntsegts 4 жыл бұрын

Thanks for a through vid. Any chance you know what kit fits my ej204 dohc?

@247jeffmarshall 3 ай бұрын

Just did the job with a cheaper Amazon one (not the one of Subaru only store) and I would highly recommend getting a better one. It popped out from the cams fell on the floor and the alan bolt portion snapped off lol luckily I had a mig welder to weld it back on but you get what you pay for

@RLTPDX 4 жыл бұрын

Hi. I chase your videos and believe me they are very helpful. Thanks. question It is possible to change the head gasket without removing the engine ?

@SubaruONLY 4 жыл бұрын

Yep. It can be done for sure. Just need to unbolt the engine mounts and pitch stop so you can raise the engine as high as possible. But I got to be honest, I’ve never done it. Good luck. Cheers! 🤙

@salimfellah4778 2 жыл бұрын

Hi. Thank you for your help.. is that apply for all Subaru... what about Subaru 2001 forester ??

@sloppyteriyaki2158 5 ай бұрын

would you do any revolutions on a manual transmission to check if the lines align again? or would you just align them all and crank her up? 🙋🏻‍♂️

@jesusmadrid1213 2 ай бұрын

I tried to buy the cam tool but says is no longer available, hope to do my firstsubarus first timing belt your video was alot of help...any info helps

@mauriziobussolino2115 2 жыл бұрын

Thank you for your video. I have a bug eye bought in 2001 Questions: On my old EJ20, there's a way longer bolt than the one you show on the lower red cog gear, plus a washer behind it is it my mistake mixing them up? Also the idler pulley that came with the gates kit is slightly different, the seal of the bearing isn't as deep making the original bolt shorter. I have replaced that bolt with one that is 1/2 longer. The old one wouldn't even catch on the threads. Now when I took down all the pulleys I made sure to put the bolts back in their original spot. At least I think I did. Just need to make sure. Thanks for any feedback

@scottishlyscubaru145 3 жыл бұрын

I’m at 77,000 right now, I’ve owned the car this whole time. I’m just beginning to do slight reliability upgrades and the timing belt and water pump is what I’m thinking about doing next.

@SubaruONLY 3 жыл бұрын

👌

@alexanderkillips3121 Жыл бұрын

Best timing video yet tho I wish it was the FB25 engine

@lightningmckurt2406 3 жыл бұрын

wow, extremely great guide! Do you have one for removing/installing the covers while inside the engine? I'm about to check if my timing belt skipped a tooth or two on my EJ20X Legacy. I'm going to use the guide to see if everything lines up, well done! I'll post the results soon.

@SubaruONLY 3 жыл бұрын

Don’t have one for that yet but good idea for a video. Super common thing to have to do. I’ll def add that to the list!!! 👊

@luisnatura2053 3 жыл бұрын

nice one bro..

@SubaruONLY 3 жыл бұрын

Thanks! 👊

@travisburton2948 8 ай бұрын

One thing you skipped was mentioning the water pump. If you are doing a 100k replacement of the belt, it just makes sense to change the water pump, since the belt drives it and you are in that far.

@Mindbogglaz 2 жыл бұрын

Hey Luke the video is great! I have a question. I have a ‘04 forester XT EJ 25 and am trying to align the cam notches on left head. How can I align the notches and turn both cams without damaging valves?

@SubaruONLY 2 жыл бұрын

Best way is follow the Factory Service Manual. The intake and exhaust cams each need to be rotated in a specific direction; one is clockwise and the other counterclockwise - then lock them in place and install the belt.

@dariusstack Жыл бұрын

What tool I can use to keep camshaft from moving while doing timming belt work

@RenaudRolandHubertR2 Жыл бұрын

Sorry if it was already answered below but did a quick check and didn't see the question. But is it possible to do that timing belt replacement and water pump without pulling the engine out? Maybe just dropping the radiator. Would that give enough clearance?

@grant3682 2 жыл бұрын

Hi, Great video, do you have any early engine build videos which use the early type tensioner? That loctite looks like conterfit stuff, far too runny, genuine loctite 243 does not run like that down the thread. Thanks

@SubaruONLY 2 жыл бұрын

Hi. I do have some older ones. Think the locktite is just old, but I’ll take a closer look - thanks!!!

@ahmadcheik1835 11 күн бұрын

On the right-hand side of the engine, does it matter if the actual gear itself on opposite sides or are they different cz they both look the same so

@diegohernandez9449 4 жыл бұрын

Luke where have you beenI've been waiting for more Subaru vids I haven't seen or heard anything from you in about a month please come back we need more videos videoslove you showing us how to install the engine back into the car thank you

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@prod.joseph8786 4 жыл бұрын

love your video. i just got a 2001 wrz imp and i was wondering what the best water pump and timing belt kit brand is for it, thank you

@SubaruONLY 4 жыл бұрын

Probably OEM for stock HP. For legit high end racing stuff, check out RCM in the UK.

@SubaruONLY 4 жыл бұрын

RCM = Roger Clark Motorsport

@thomassycorra6058 3 жыл бұрын

Awesome thank u👌🏽😘😄

@SubaruONLY 3 жыл бұрын

Sweet! Cheers!!!

@jeniferenglesby9877 2 жыл бұрын

How do I get the big pulley in middle off?

@carlost7644 3 жыл бұрын

Great video! Quick question, are the timing guides used with an automatic? I noticed when removing the belt that I did not have the main guide and figured that previous owner left it off when the timing belt was last done. Then after watching your video I see I also don't have the guides by the intake cam gears. Prior to watching your video I ordered a nice timing guide and planned on installing it when I install the belt. Any advice as to either using the guide(s) or not? Additionally, any harm in adding the 2 other guides? Thanks for the help!

@SubaruONLY 3 жыл бұрын

Hi buddy. Thanks for the support! As you suspected, those timing belt guides are normally only used for manual transmission cars. Does it hurt if they’re installed on an auto, no, but be sure to install them correctly. As for the main VS. the side cam guides, same thing, either are ok to use, but really they’re aren’t needed for an auto. Cheers, hope this helps!!! 👊

@Reefdoh Ай бұрын

What happens if I’m having trouble rotating the crank sprocket to get it to the mark? Feels like resistance. Engine is on the stand and has not been ran yet.

@juansaldivia3126 3 жыл бұрын

Hi, thanks for your videos they are very helpful, I would like to ask you a question, I want to change the timing belt kit but my car does not have the rear cover belt, it is very risky to remove the pulleys to be able to put both cover belt? I have a Legacy 2007 ej204 engine, I hope you can give me some advice, greetings from Chile

@SubaruONLY 3 жыл бұрын

Not too hard and good idea to add that cover for sure. Should be able to walk through the steps using videos here - good luck!! 👍

@alfredojarillo3146 Жыл бұрын

Hello, are valves supposed to be open on loaded exhaust cam, driver side, when in time with intake cam?

@satoshibautista7766 Жыл бұрын

Can I ask where the other 2 Cam gears didn't get the special locking tool also? I'm just learning so sorry if it's a stupid question

@traeweninger1859 4 жыл бұрын

Amazing video! I’m getting ready to do a timing belt job on my 05 sti!

@SubaruONLY 3 жыл бұрын

Been a while, but I’m back - hope you’re doing well. Cheers!!! 👊

@alexandergarwood379 2 жыл бұрын

Need help a mechanic from Jamaica I have a problem where ej 20 a backfire when I try line up the timing it all one teeth off so my question should the right side a the head camshaft should ave the free play mean can easy to move

@katoben8584 7 ай бұрын

Thanks papa

@whoknows1631 2 жыл бұрын

How do you rotate the camshafts on my SOHC into position with out the belt on? or those specialty fitting. I have already removed the belt, tensioner and pullies.. can't rotate the cams

@bonza007 Жыл бұрын

Is it true that the lines on the timing belt only work if belt is installed so the words on the timing belt are readable from the front of the engine? Or does it work both ways?

@kaundachibwe3638 4 жыл бұрын

Is this same to be done on an EJ20 engine

@moshelevy9785 4 жыл бұрын

hello i have a question, if i line up the marks and than when i take of the belt one of the campullys moved from the mark, what should i do turn it again to the line clockwise or just turn it back against the clock ? ( i guess the cranck pully won't move?!) thanks

@rayespinoza1846 4 жыл бұрын

Hey man I’m assuming you know a lot about ej20s, I have a bugeye wrx that’s sti swapped but currently burning a little oil out of the exhaust, new turbo and motor has 40k miles on it, should I try a AOS or catch can? Any suggestions to help me out, thanks man