Subaru Forester Window Regulator Replacement

  Рет қаралды 18,801

Scrap Daddy's Garage

Жыл бұрын

Replacing the power window regulator and motor on a 2006 Subaru Forester.

Пікірлер: 44
@ashleyst.angelo1661
@ashleyst.angelo1661 4 күн бұрын
Looks like a nightmare but thanks to your video I will save money on having someone else do this job. Now I know what to do. Thank you so much 🙏
@violetflame22
@violetflame22 24 күн бұрын
Thanks for the video. You're a more patient man than me. I think I'll get my mechanic to sort this issue out for me!
@scrapdaddysgarage5027
@scrapdaddysgarage5027 24 күн бұрын
@@violetflame22 thanks for watching!
@donmac6690
@donmac6690 Жыл бұрын
Thanks for the video as it will help to guide me in replacing my 2013 Subaru Forester rear window.
@tabelq
@tabelq Жыл бұрын
Just completed this task with your guidance on my 2005. Mine was temperature sensitive, no-op when cold. So 40ish today window stuck at top. My solution: heat the motor a bit with propane torch! Wound right down to where I could access glass nuts. Like yours the glass wedged at top. Thank you for sharing your skills.
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
Glad to help! Thanks for watching. Please subscribe if you haven’t already.
@technocris1
@technocris1 17 күн бұрын
Thank you mate , I've just repairing one
@scrapdaddysgarage5027
@scrapdaddysgarage5027 17 күн бұрын
@@technocris1 thanks for watching!
@anthonymeza5212
@anthonymeza5212 6 ай бұрын
Yo this is actually very helpful! I'm gonna have to watch this a few times to be able to help a friend of mine to be able to switch out that regulator and motor thats been an issue for them
@davecollom7737
@davecollom7737 11 ай бұрын
Excellent video . I was struggling to swap out regulator. But once i found your video i flew throgh it. Cheers, i owe you a beer
@scrapdaddysgarage5027
@scrapdaddysgarage5027 11 ай бұрын
Thanks for watching. Please subscribe if you haven’t already.
@mickjh55
@mickjh55 6 ай бұрын
I watched your video, but I don't dare try to do it myself, I get anxious and surely wouldn't get it back together, lol! Great step by step video though, thanks!
@freshofbreathair1476
@freshofbreathair1476 11 ай бұрын
Thanks for making this video. Hot tip for others to make sure the window isn’t in front of the track on the left side when you reasssemble!
@scrapdaddysgarage5027
@scrapdaddysgarage5027 11 ай бұрын
Thanks for watching and for the tip!
@alexgrimaldi6062
@alexgrimaldi6062 9 ай бұрын
I'll give it a go now that I watched your excellent video. 🙂 Not being able to drop the glass and remove the motor assembly was putting me off. I've only ever done window winder assemblies.
@scrapdaddysgarage5027
@scrapdaddysgarage5027 9 ай бұрын
Thanks for watching!
@juanpollo981
@juanpollo981 Жыл бұрын
Thank you sir this was very helpful
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
Thanks for watching
@TheShangralaaaa17
@TheShangralaaaa17 Жыл бұрын
good video. about to do this on my 2004 Forrester
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
Thanks for watching
@PainRacingmusicvideo
@PainRacingmusicvideo 11 ай бұрын
Your really good video helped me out a ton the only thing I did different if you see the Phillips head screw and take that out it allows you to remove the the trim on the outside of the window which makes it a lot easier to remove the whole window you can see the screw really well at 3 minutes and 45 but you must get the window to this point in order to get to the screw
@scrapdaddysgarage5027
@scrapdaddysgarage5027 11 ай бұрын
Thanks for the information! And thanks for watching
@straightdooshbags1786
@straightdooshbags1786 3 ай бұрын
If the window motor is stuck up, unbolt the regulator and youll be able to slide the glass down enough to get to the two nuts on the left. To get to the nut on the right, use a step bit to drill a hole the size of a 10mm socket, it wont hurt the structure of the door. However my big problem was the mounts in the glass were spinning so i had to reach behind and hold them with needle nose vise grips.
@scrapdaddysgarage5027
@scrapdaddysgarage5027 3 ай бұрын
Thanks for the info
@Frank-mu5yz
@Frank-mu5yz 9 ай бұрын
Best video...very helpfull.. Thank you..
@scrapdaddysgarage5027
@scrapdaddysgarage5027 9 ай бұрын
Thanks for watching! Please subscribe if you haven’t already 👍
@ridgeydidge4012
@ridgeydidge4012 21 күн бұрын
Great video thanks
@scrapdaddysgarage5027
@scrapdaddysgarage5027 21 күн бұрын
@@ridgeydidge4012 thanks for watching
@ian59vest
@ian59vest Жыл бұрын
Thx 🙏
@iamnickdavis
@iamnickdavis Жыл бұрын
Bro, my window is stuck in the up and you edited out the special sauce to remove the unit from the door. I don't understand :( but thank you for the rest of the video.
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
Sorry, sometimes it’s hard to record and work at the same time. Thanks for watching!
@vintage76vipergreenBeetle
@vintage76vipergreenBeetle Жыл бұрын
👍
@holographicpikachu1877
@holographicpikachu1877 4 ай бұрын
Did you ever have to go back and lower the glass a little? Seems like it was a little rough closing the door. Mine is doing the same now and I'm trying to figure out how to adjust the height.
@scrapdaddysgarage5027
@scrapdaddysgarage5027 4 ай бұрын
I might have tweaked it a little, it’s been a while since I did that. Thanks for watching
@JGSmash
@JGSmash Жыл бұрын
What window regulator would you recommend? I'm on rockauto
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
I buy the part that has the lowest cost and the cheapest shipping. Alot of the parts out there are made in the same place, just boxed and branded differently. I try to save money. Thanks for watching!
@mackue8913
@mackue8913 Жыл бұрын
Question for u. I switch out my motor on 06 Impreza now my glass is slightly off. How do I just the glass it lean towards the inside Morris, and pushing on the rubber triangle by the mirror. Thanks
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
You need to adjust the window regulator, loosen the hardware and move the pivot points around till you find the spot where it works properly
@inoriyuzuriha7543
@inoriyuzuriha7543 11 ай бұрын
​@scrapdaddysgarage5027 the pivot points of where the motor sits or do you mean something else because I'm having the same issue on my 2003 forester
@mackue8913
@mackue8913 11 ай бұрын
@@inoriyuzuriha7543 when I replace my window regulator I didn’t put in the inside the rails that’s why it was pushing the window out. I fix that now it’s all good!
@inoriyuzuriha7543
@inoriyuzuriha7543 11 ай бұрын
@mackue8913 I did at first and fixed it and it was still a little out but rocked the window a bit and it sorted itself some how
@donovanrupard7916
@donovanrupard7916 Жыл бұрын
I wish you put it back together ended up with more bolts 🤣🤣
@scrapdaddysgarage5027
@scrapdaddysgarage5027 Жыл бұрын
When I worked at a dealership we would prank the other mechanics by throwing some bolts into their parts tray
@freshofbreathair1476
@freshofbreathair1476 11 ай бұрын
Ended up with 2 left myself!