@resuort 4 жыл бұрын
Engine: 0:33 Transmission: 9:05 Rear Diff: 17:06 Harness: 18:05
@resuort 4 жыл бұрын
WOW! THANK YOU! I've been wanting to do a H6 swap into my 15 brz! The EZ36 is what I want to use And knowing that the FA20 transmission will bolt up directly to an EZ block is some god send info!
@Noukz37 3 жыл бұрын
So how did it go? I haven't seen anyone doing that
@resuort 3 жыл бұрын
So I'm leaning about wiring my self and haven't started the swap but it will be something I will be doing.
@Noukz37 3 жыл бұрын
@@resuort Mechanically it doesn't seem to be to much work, but I'm not sure about wiring and electronics... Is it possible to do by yourself if you're not an electrician?
@resuort 3 жыл бұрын
Yes it's possible.
@alejandrotobienne584 2 жыл бұрын
An EJ will bolt up to the trans.
@Roshu8 4 жыл бұрын
This is some really great info, I've been looking for a proper rwd trans for my impreza drift car and it's nice to find out that you can use the brz trans with a little fab work.
@therealf1nlander 4 жыл бұрын
Sweet build man, really helpful. I am currently in the process of ez36D swapping a 1995 impreza wagon with a brz transmission for a drift build. Wiring hopefully wont be a huge issue for me though as i am doing a dash swap and am going to attempt to swap over the entire wiring harness from my tribeca.
@xTribulatedx 3 жыл бұрын
Does doing a whole dash swap eliminate most issues with wiring? Interested in doing a similar swap
@RChero1010 2 жыл бұрын
I'm thinking of an EZ30R into a 3rd gen with a BRZ transmission. Hearing about the wiring, I may just skip it all and dive straight into a standalone. With some luck I can even retain air conditioning, but that's a bridge to cross in a year or two. Thinking of 4th gen lgt brakes and an R180 but I'll have some head scratching to do with the axles.
@alejandrotobienne584 2 жыл бұрын
Doing this with a 2.5i with a EG33. Going with a high compression build.
@ze_german2921 4 жыл бұрын
Now build a 3.6 engine, port some heads, add a cam, individual throttle bodies. 😁
@Alpheamus 2 жыл бұрын
@@stevenp3176 you sound like you LS swap RX-7s
@TheCraneom 4 жыл бұрын
Can you post the link to the generic harness merge write up? And contact info to the ECU tuner guy? I’m looking to do this to a 95 Impreza
@TheSwoleTroll Жыл бұрын
Did you ever get Gabe’s contact info? I am interested in doing something like this as well, Thanks in advance!
@jonasbaine3538 2 жыл бұрын
Is there a video of the frs H6 driving?
@ferenctulics9688 3 жыл бұрын
Wow! Amazing detail! You helped me a lot! Great video! Thank you!!!
@spas50 2 жыл бұрын
Thank you man you awesome 👍 great project 😊 i love to see old but gold cars white engine like h6
@devonswindell9735 Ай бұрын
Did you ever try a BRZ driveshaft? Or at least part of it mated to the original shaft?
@therootedprogress 3 жыл бұрын
Whats the contact info for the guy who flashed the ECU for you?
@theroad2hell 3 жыл бұрын
This is a great video, I have been wondering if I can do this to my 01 outback llbean edition.
@tturi2 Жыл бұрын
is it possible for the stock 86 tailshaft work if the transmission is placed further back? would an 86 front cross member bolt into the liberty?
@farhenheit628of1200 3 жыл бұрын
Can u show more vids pics? It helps me when I see it, I can understand it better. I own a 2005 outback sedan 3.0R
@minesaver 14 күн бұрын
You have a lot of franken subie experience it seems. What are your first thoughts on the idea of an eg33 mated to a brz trans, with that combo being used in the brz or potentially that motor and trans being put into say a gen1 legacy? Do you think either would be doable fitment wise, or one definitely easier than the other. Would be a personal project, no real intentions other than fun weekend use and maybe a couple track days for the thrills. Thanks if you have any thoughts on the idea.
@TIRESIDE 13 күн бұрын
Personally, I think putting a brz transmission into an SVX would be awesome. You get the eg33, a cool unique car, and you make it more special and more fun to drive by making it manual and RWD.
@minesaver 13 күн бұрын
@@TIRESIDE That's funny. The thought crossed my mind too after I sent that message. I would consider it mostly if it was a way to reduce weight by having less driveline. So many options when you have legos
@andypalomera9866 Жыл бұрын
What are the measurements to create the custom two piece driveshaft? Im currently buildinga 97 legacy with a brz trans as well.
@TheRottenChicken966 Жыл бұрын
Hey! Planning to do this to a 2006 legacy, the easier part is the engine is already in, however, the 4th gen I heard has a canbus system and all, is this ECU flash method work for that? or how could that be solved?
@chacealvernaz7818 Жыл бұрын
Do you have that guy’s information that works with EZ ecu’s
@deehsar52 4 жыл бұрын
I was thinking about putting a brz trans with my eg33 engine just not sure how how much modify I need to do to get those to mount up
@Dedicationbrandco 3 жыл бұрын
Hell yea man. Thanks.
@theroad2hell 3 жыл бұрын
I have a feeling I face a different set of issues already starting out with h6 everything.
@jazzmunkyy 3 жыл бұрын
do you have any idea how much length is added to the front half of the drive shaft? thats the only thing left for my build
@maximeusadosseleccionados4419 3 жыл бұрын
I am writing to you from Argentina and my name is Diego. I am going to start a swap project on my Subaru Impreza gc8 and I have a choice of the ez30 or ez36. Looking for information, they comment that the ez30 is simple to assemble but the ez36 is not. They say the ez36 need modifications. I want to ask you what modifications you had to make to install the 3.6 engine and what transmission system did you use. I'll be very greatful. hug.
@EPYes 4 жыл бұрын
Nice build. What did you do about the front hubs (no CV axle to strengthen knuckle/hub assembly)?
@TIRESIDE 4 жыл бұрын
Machined off the hub end of the CV axle and bolted into the hub.
@dohc7232 4 жыл бұрын
also did you try to see if the subaru AWD driveshaft even splined into the BRZ transmission??
@TIRESIDE 4 жыл бұрын
The splines are different diameters and spline counts
@dohc7232 4 жыл бұрын
whelp that sux, probably better to just weld a WRX center diff and run with that transmission
@Dedicationbrandco 3 жыл бұрын
so much awesome info. i would like to know more about the map dccd control for the wheel speed. any thing else you can share?
@TIRESIDE 3 жыл бұрын
All the info is on their site! mapdccd.com/vss.html
@Dedicationbrandco 3 жыл бұрын
@@TIRESIDE thanks man. this really helping me out. much appreciated.
@JT-qf3rj 4 жыл бұрын
Can you give us the name and contacts of the ecu tuner guy you used. That would be very helpful.
@future_phonk 2 жыл бұрын
Is this still an ongoing project?
@davechakh3700 3 жыл бұрын
Hey, I may have missed it, but did you use a BRZ clutch/pressure plate and an EJ flywheel?
@TIRESIDE 3 жыл бұрын
Brz clutch, pressure plate and flywheel
@4x4MadnessNZ 4 жыл бұрын
Hi there just wondering who does the ecu reflash as wanting to manual my lancaster thank you
@TIRESIDE 4 жыл бұрын
Gabe Corman on the six swap Subaru page on Facebook
@jonasbaine3538 2 жыл бұрын
GR86 should have gotten flat 6!
@xenn4985 Жыл бұрын
God, could you imagine how fun that little thing would be with the h6? Unreal.
@tysoncross3350 4 жыл бұрын
Is the 1st gen ez30 ecu flashable/tuneable?
@dylanfurr8926 4 жыл бұрын
Yes
@dohc7232 4 жыл бұрын
I need to see better pics of your transmission crossmember man, please
@rowenrosario2393 4 жыл бұрын
I have some pics that i can send you, im using the frs trans on my 95 impreza! But the mount should be the same.
@andypalomera9866 Жыл бұрын
@@rowenrosario2393 hey man would it be coo lif you can send them to me too im going to this this job on my 97 legacy
@masmotorsports 4 жыл бұрын
Do you have an instagram?
@TIRESIDE 4 жыл бұрын
MasMotorsports sure do! @tireside
MrSubaru1387
Рет қаралды 368 М.