Sullivan D185 Basic Troubleshoot
Рет қаралды 6,298
2 жыл бұрынGuys! I actually won something at auction! Check it out! Here we have a 1996 Sullivan D185 towable air compressor. It was sold as "inoperable", so the price was right. I don't normally gamble, but this time it paid off.
A simple problem, some parts from the cannon, and I have an endless supply of CFM's! All for less than 1300 bucks!
I'll be using this mainly as a sand blasting unit for cleaning up parts, and maybe running another CNC plasma. We'll see.
Thanks for checking out my 5 minute video. Hopefully someone in the universe can use what I learned here, for their unit.
@jamesward5721 Жыл бұрын
That looks to be a great buy - nice access to all the important stuff - the newer ones you need to be a contortionist.
@sidetrackmetalworks2058 Жыл бұрын
I'm floored at how easily it starts up. I still need to change out the temperature switch. Maybe now that its dicksnappin cold out, I'll source that little part.
@stevenearwood9274 8 ай бұрын
What oil did you use in the compressor ?
@streetbikebilly2597 Жыл бұрын
I have a old 185 Ingersol and it just blows straight out the pressure relief valve when you put it on run... Any clues?
@sidetrackmetalworks2058 Жыл бұрын
Maybe make sump safe to work on (zero psi), remove valve and clean/lube it? Sometimes they get stuck.
@streetbikebilly2597 Жыл бұрын
@@sidetrackmetalworks2058 I see what your saying but at the same time have no idea where that is
@streetbikebilly2597 Жыл бұрын
@@sidetrackmetalworks2058 this compressor is on the back of a paint truck it has 37000 hours
@streetbikebilly2597 Жыл бұрын
What is the part you are saying??? They just replaced the couplingr and I believe the oil separator filter
@streetbikebilly2597 Жыл бұрын
@@sidetrackmetalworks2058 I ran the truck for years that is always lead to large amount of compressor oil I think that is the cause of the short life of the coupling
@KhameleonKoatings Жыл бұрын
where did you get a new sensor for that there that you bypassed? i need one too now :(
@sidetrackmetalworks2058 Жыл бұрын
I still have to find one. I do know that I ain’t paying Deere prices for one though! This summer, I’ll drain down some coolant and pull the sensor.
@KhameleonKoatings Жыл бұрын
@@sidetrackmetalworks2058 ok right on i may be forced to get one off JD, but i will dig up the pn and chase one online first thx
@KhameleonKoatings Жыл бұрын
@@sidetrackmetalworks2058 any chance you had moment to learn the part number? i have a sullivan paletak but i cant find my manual and i am struggling to see it online ... just curious if you have made any headway since last week? do you have the sensor out of the motor> maybe the PN is on the part itself?
@sidetrackmetalworks2058 Жыл бұрын
@@KhameleonKoatings I won’t be of much help for a bit. Out of town for work. It’s definitely on my list for when I get home, though. Apologies.
@sidetrackmetalworks2058 Ай бұрын
I found the switch that works. Turns out, it is a normally closed switch, and I had a normally open switch on there. Changed out the switch to a NC switch from Advance Truck Parts. ATP Thermal Fan Solenoid Switch 180 Deg 8037044 8037014 Hope this helps.
@romuloarellano8750 11 ай бұрын
how to troubleshoot fuel dilution
@sidetrackmetalworks2058 11 ай бұрын
Pour some out, and set it on fire?
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Dan The Man Garage
Рет қаралды 6 М.