Super Bright LED Light Review, Baja Designs Squadron XL
Рет қаралды 153,120
9 жыл бұрынSmaller than a LED Light Bar, The Baja Designs, Squadron XL lights are the best small package off road lights I could find while doing my research. If you watch my video review you will see how bright they are and how many features it has which made it a clear pick in my book. I wanted reverse lights for backing down the trail, backing down a boat ramp or even backing down the driveway at night.
Here is where to get the lights: www.amazon.com/gp/product/B00G...
How to Install the Lights: • How to Install Auxilia...
Some Facts
Lumens: 4300
LEDs: 4 Cree XM-L2 T6 Bin LEDs
Wattage/Amps: 42W / 3.5A
Weight: 2.45 lbs
LED Life Expectancy: 49,930 Hours (5.6yrs)
-Built-in Reverse Battery & Transient Voltage Suppressor Protection
Front Lens: Hardcoated Polycarbonate
Housing: Extruded Aluminum, Anodized
-Exceeds MIL-STD810G (Mil-Spec Testing)
-IP69K (Waterproof, Submersible to 9ft)
-IK10 Compliant (Mechanical Impact Testing)
-3 interchangeable lenses
-5000k Color Temperature
Satisfactions Guarantee - 30 day money back guarantee
Limited Lifetime Warranty - Complete Purchase Protection
Coupon Code for a 10% Discount on any of their products:
BD10OFF
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzfaq.info_c...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
@Tesoromio22 9 жыл бұрын
As somebody who has been subscribed to ChrisFix for quite some time now, I must say that I'm utterly ANNOYED by the random people saying he is getting paid for advertising and he isn't showing us products he actually likes or uses. Firstly, if you know anything about ChrisFix, you would realize that this guy is not a typical youtuber--he actually wants to help people learn. I watch most of his videos, and I have received a response from him on EVERY video I commented on. Obviously, this guy is dedicated to helping the people who follow him and is genuinely invested in teaching us about cars. Secondly, if we are going to use your logic(that he is only reviewing more expensive products to get them for himself), why has he reviewed regularly-priced products as well? Finally, for those trolls who have really irked me, I suggest you get a reality check. A NORMAL person would thank ChrisFix for posting multiple how-to videos a week (which, if you are incredibly ignorant and somehow don't know, probably takes the guy hours to edit) and for helping us learn how to fix our cars so we don't get ripped off by dealerships and garages. If you're complaining about a KZfaqr like this, you are an idiot.
@chrisfix 9 жыл бұрын
Tesoromio22 Thank you for the thoughtful response.
@artiet5982 6 жыл бұрын
Nicely said. Chrisfix is the standard to which you tubers should be held. Quality, unbiased, awesome editing, to the point, informative, cannot say enough great things about chrisfix. I’ve had multiple friends subscribe and learn. I’m sure he gets approached A LOT for sponsored product reviews and obviously he doesn’t engage in that either.
@angelicaamora11 5 жыл бұрын
PREACH 🙌🙌🙌👏
@acomputer8me 9 жыл бұрын
"If you get your truck below nine feet, then you have other problems." Haha, love it!
@chrisfix 9 жыл бұрын
acomputer8me #truth hahaha
@888johnmac 9 жыл бұрын
acomputer8me .. exactly what I was thinking.. lol
@keithmerryman4402 4 жыл бұрын
Chris, Thank you for your very detailed and educational videos! I am nearly 70 years old and I have owned, and worked on many of the muscle cars of the 50's and 60's and 70's when they were new! I'm restoring a 2006 Jeep Wrangle now. Many of your videos have taught me a lot and I'm very great full for your time and effort to help us followers!
@martinhile5285 9 жыл бұрын
Excellant review. Glad to see your support for Made in America....These look like a great set of lights.. Keep the great reviews coming.
@chrisfix 9 жыл бұрын
Thanks a lot Martin! I liked how they were not only designed/made in America, but the parts were from America which is rare to see! I will keep the reviews coming. I have a air pressure gauge, a multi-size wrench, and an obd2 scanner I have been testing and those videos will be out shortly!
@chrisfix 9 жыл бұрын
+Luis Payan, for some reason I cannot reply to your comment directly so I hope you see this. What type of lights are you looking for (reverse, underglow, fogs, etc)?
@DocPepper12 9 жыл бұрын
I'm looking for Headlights and fog lights, I want to choose the perfect ones because i drive about 3 hours at night every weekend!
@chrisfix 9 жыл бұрын
Luis Payan I would go with projector lenses. You can retrofit them (or maybe a company makes kits for your car because it is a commonly modded car. Then you can run any bulb as bright as you want and the light will project right in the spots you need. Start with headlights. There is a night and day difference btwn projector lenses and regular lenses.
@user-el6lc7hy5z 9 жыл бұрын
Hi Chris, I have an HID system which i had professionally installed in my 2007 Jeep Patriot. Unfortunately, the computer did not like the system and kept flashing on and off. The installer told me this would happen as its a common issues with Dodge-Chrysler vehicles. Now that i have Halogens back on, i have no use for the HID and was wondering if somehow they could be wired up as auxiliary lights direct to the battery of as back up lights as shown in your video. If its possible to wire as back up lights or even custom front fog lights, what kind of an enclosure can i use to cover them with. Will i need to buy a x2 Headlight assembly or is there some other hack i can do. The system is an H13 bulb, color temperature 5000K of the Kensun brand. The Jeep does have a stock H10 halogen foglight built in but when i compare next to someone with HID, both headlights and foglights combined look pretty dull. Also, if front or rear aux lights are not possible for this HID system, please provide some info on how i can build a cigarette lighter socket-hand held spotlight system with it. i did not find much information for this youtube so i would love for you to post a video on this if convenient. Thank you.
@garrisonaw 8 жыл бұрын
+Ankur Akolia Before you go to the expense of installing something like that as aux. front lights, check your state's laws. Some states have specific laws regarding the number and intensity of front-facing lights, so adding an extra set of lights (or replacing your fog lights with HIDs) might get you in hot water. Granted, it may never even be noticed unless an officer actually sees them burning at night, but it's still something to consider.
@Joey-rr7cl 9 жыл бұрын
I really want to mount 2 of these on the front of my truck! I would use the combo lenses for that application though. When I save up enough, I know which lights I am getting. Thank you for the review ChrisFix, how to videos or review videos, your videos are always helpful.
@chrisfix 9 жыл бұрын
Lights are addicting for some reason right?!?! haha I think these would be great as lights for the front of the truck too! I want to try the combo lenses on the rear of my truck just to see the difference!
@EminHVAC 9 жыл бұрын
Chris another excellent review. Good job brother. well done.
@chrisfix 9 жыл бұрын
Emin HVAC Thanks a lot man!
@foysal79 3 жыл бұрын
He is your brother
@toyotrustPR 9 жыл бұрын
Wow, great product and review. Thank you for your videos.
@chrisfix 9 жыл бұрын
toyotrustPR Thanks you and no problem!
@christopherarendt3531 2 жыл бұрын
Perfect present for tailgaters! Thanks!
@NonStopJames1 4 жыл бұрын
I just put these on the front of my Venza. best move ever :)
@chrisfix 4 жыл бұрын
Awesome!
@bladder1010 9 жыл бұрын
Good review and nice lights -- but the thought of having $700 reverse lights flapping in the breeze would make my cornhole pucker.
@chrisfix 9 жыл бұрын
Bill Bunyack Haha, when you need them in the boat ramp and on the trail, it becomes a little different of a feeling I suppose. You cant see anything at night out the back with the stock lights and even with them on the truck for a little over a week, I have used them a lot. Already I was backing down the boat ramp at night and I was able to see my boat, see the side of the ramp, see where to stop, and also get all of the gear into my truck bed without using another light. So I guess it really depends on the application. I definitely get where you are coming from! Sure, a road car these are an expensive option, but for off road applications and for what I do, these are a lifesaver! And thanks for the feedback on the review! I appreciate it since I just started doing reviews and any feedback is helpful to make future videos even better! I can think the video is great, but hearing it from others helps verify it!
@CodysContent 9 жыл бұрын
Cornhole pucker, I'm dying HAHAHA
@bladder1010 9 жыл бұрын
ChrisFix Hey, I hope you didn't think I was criticizing your purchase decision. Those definitely look like excellent lights, and I'm sure you won't regret spending the money on quality. You'll probably be moving those lights on to your next truck, and maybe the one after. Now that I think about it, the KC Hilites on my B4000 were cheaper, but after a number of years, they're showing their age and I'll probably replace them with LED lights anyway. So how much money did I really save in the long run? Just a thought -- what about replacing the hex head mounting bolts on your lights with some nice stainless Allen button-head bolts. It might make them slightly harder to steal, and they're inexpensive. As for your videos, I'm really impressed with their quality. Even though I consider myself a somewhat experienced DIY mechanic, I still learn from your videos, but you explain things very clearly so that less experienced people can easily understand, also. That's a tough combination, but you've got it. Your photography is great, and your editing is really tight and organized. Your narration is really well thought-out and to the point, and keeps things moving a good clip. Even though some of it is simple stuff, I don't ever get bored. Plus you don't have all sorts of flashy intros or other tedious jack-assery. All good stuff, and no filler. A lot of people have technical skills, but very few have the ability to relate the information as clearly and succinctly as you do. Keep up the great work, and enjoy those lights.
@chrisfix 9 жыл бұрын
Bill Bunyack Not at all. I was just telling you why I got them. I appreciate the feedback and thanks a lot man!
@draxxes1 9 жыл бұрын
I was thinking the same thing. Corn hole pucker factor 10 for sure! lol
@DocPepper12 9 жыл бұрын
I liked this video big time! Good job Chris! I had a question. I was wondering if you could help me find good LED Lights for my 03 Dodge Neon?
@AndyGarcia-ch1ci 8 жыл бұрын
Dude PRO review!!!!! Thanks!!!
@johnkinnane547 9 жыл бұрын
G'day Chris thank's for the vid, what a great light. American made to, I like the fact that you can see the quality when you got it out of the box. I would really love one of these I just hope that you can get them in Australia. John
@chrisfix 9 жыл бұрын
John Kinnane I am pretty sure there is a baja designs in Australia. You guys probably have some awesome offroading spots out there! I was honestly impressed of how well these were made. Like I said in the video, the only fault I could find was the price. I guess it is a factor of "you get what you pay for". If I had more money, I would get a bunch of these haha.
@obamadontreadgood 7 жыл бұрын
Electrical novice here. But if I'm not mistaken I could run a three position switch and have the option for high, low (50%) and off from a single switch, right?
@justaguy4real 9 жыл бұрын
Wow, couldn't really see the stock lights to all of a sudden total daylight behind your truck. Way to go kid. Btw, your videos are racking up and getting better. Kudos
@chrisfix 9 жыл бұрын
byekim mikeyb Thanks a lot man! I really appreciate it!
@Titantramp4u 9 жыл бұрын
Well done video! Footage was short and to the point and the narrative was very professional. It might be important to note that these lights where designed to take the rigors of off road racing such as the Baja 1000. I'm not a sales person nor do I work for BD but do run their products on my person truck.
@chrisfix 9 жыл бұрын
Titantramp4u Thanks a lot man! That is very true! That is how they got their name and reputation! Definitely consider subscribing! New automotive 'how to' videos every Thursday and most Mondays!
@justinbond9987 9 жыл бұрын
You are pretty good at these reviews. Those lights are really nice! You should do comparison reviews too. Compare these lights to another LED light cube. Just a thought... I cannot wait to see how you wired them.
@chrisfix 9 жыл бұрын
Justin Bond Thanks man! That is a good idea! I cant do that right now, but I will definitely take it into consideration for future reviews and when I can, I will!
@EminHVAC 9 жыл бұрын
ChrisFix I have to agree. reviews with comparison always are more interesting. However this review was a good one.
@chrisfix 9 жыл бұрын
Emin HVAC Good to know and thanks for the feedback! It is super helpful!
@FastForwardRay 9 жыл бұрын
"... if your truck is 9 feet underwater, you have other problems.." +1
@chrisfix 9 жыл бұрын
FastForwardRay hahaha, true statement!
@DodgeCummins26 9 жыл бұрын
awesome review man
@chrisfix 9 жыл бұрын
***** Thanks a lot! These lights are really something else! I am so impressed! Definitely consider subscribing! New automotive "how to" videos every Thursday and most Mondays!
@DodgeCummins26 9 жыл бұрын
ChrisFix subscribed!
@chrisfix 9 жыл бұрын
***** AWESOME! Welcome aboard!
@reiniervanderheijden1260 6 жыл бұрын
when is the wiring video coming up?
@WoolyBuggerPicker 9 жыл бұрын
Nice lights, probably worth investing in an IPF Anti-Theft Lock Nut Kit too.
@chrisfix 9 жыл бұрын
Mike Edwards I need to look into that for sure. You got me worried now!
@zx8401ztv 9 жыл бұрын
Thats brilliant, in more ways than one lol. They sound like a really well thought out and designed product, all the important product features are covered, and the large aluminium heatsink is nice to see as it shows they want it to last :-) Cracking review chris, i wont be close to you without thick sun glasses ha ha :-))
@chrisfix 9 жыл бұрын
zx8401ztv Haha thanks bud! Glad you liked the review! You are going to need welders goggles not sun glasses LOL
@zx8401ztv 9 жыл бұрын
ChrisFix Oh yes ha ha :-)) Chris i allways enjoy your videos, you put a hell of a lot of effort into concentrating your knowedge into crisp no nonsense videos :-)) Perhaps a chrisfix hang on license plate might be a thought to cover any vehicles plate your working on, same idea as EricTheCarGuy.
@chrisfix 9 жыл бұрын
zx8401ztv That is a good idea. I will have to check out how he does it. Then I dont have to blur it which takes forever when I am moving the camera around! I am trying to think of something cool to either sell (a chrisfix tool), or give away for anyone who wants (window stickers with my logo or something). Maybe a license plate trim would be cool.
@abiel.rodriguez 6 жыл бұрын
Chris, Im trying to fins the video for "truck bed led lights" but it doesn't seem available, did you remove it?
@l4d2160 9 жыл бұрын
Now I want to mount a set of these on (what will be, sometime) my Ranger.
@chrisfix 9 жыл бұрын
Bryan Young They are great!
@the_interim 4 жыл бұрын
I'm currently thinking of adding such light but to my motorcycle. That's how I found myself at this apparently old video. Ugh I wish someone teaches me about bikes like ChrisFix teaches me about cars. Btw I've been subbed for years although I only have a bike.
@moreno_163 9 жыл бұрын
Do you think LED lights are better than HIDs for the headlights & fog lights ?
@chrisfix 9 жыл бұрын
Randy Jimenez You cannot really get LED headlights that are good yet. The key really isnt the light, but the lens. If you have projector lenses then you will have a great pattern of light. You can run a regular bulb in projectors and get amazing light output!
@GerryJ08 8 жыл бұрын
Chris. Another great video. If you were to have a single light installed, what kind of light spread would you be looking at? I want to add a single light ( because of cost) to the rear of my dodge grand caravan. Backing up at night (and in the rain) has always been challenging. Having one of these would certainly reduce those moments when you can't quite see as good as you would like. I want a light that can give me a minimum of 20 feet in distance with a spread of 15 to 20 feet close to the the rear of my van. Thanks
@chrisfix 8 жыл бұрын
+Gerry Jamieson It all depends some single lights have a 120 degree spread. You might be better off with 2 cheaper lights. Or you can get one of these lights and center it.
@GerryJ08 8 жыл бұрын
I appreciate your quick response. Thanks for the advice Chris.
@stephen1133 8 жыл бұрын
+Gerry Jamieson If you want a BD unit, I would check out the Baja Designs S2 (SII) They're 2100 lumens and you can get them with a wide cornering lens. I see them for less than $160 on ebay. I have a single Squadron on my motorcycle (over 4,000 lumens) and I have no problem driving by it on a 60% dimmer with a tinted visor. I actually think its still rudely bright at 60% but it keeps me safe.
@pavochon 9 жыл бұрын
Thanks Chris.... Measurements? From top of bracket to bottom, wide, etc.? I don't see the specs on their website.
@chrisfix 9 жыл бұрын
pavochon I was going to include the measurements in the review but I ended up cutting that out due to time constraints. From the front of the lens to the rear of the light is 3.647in. From the top of the light to the bottom of the bracket is 4.876in. The width of the light is 4.428in.
@wolfeman351 9 жыл бұрын
Have you come across any good LED headlights? I need round that fit a 1969 Cougar (or mustang). The 45 year old technology jist does not put out a good or safe light. There are kits available for halogen but I want 100% LED. They eat less amps and are more versatile. Thanks for the video again.
@chrisfix 9 жыл бұрын
wolfeman351 I have not seen a good LED headlight that is DOT approved. The problem is to get the light output of a headlight, the LED bulbs have to be huge to dissipate the immense heat LEDs put off. I would try doing a projector lens retrofit. Projector lenses can be found from junkyard cars like a bmw. Then you can run a regular bulb or even an HID bulb. The projectors "project" the light right where it needs to be so you can run a brighter bulb and you wont blind people. That is my take on it. I will keep my eye open though because I am looking into headlights myself. My truck headlights are really bad. I am thinking about doing the projector retrofit myself.
@johnkinnane547 9 жыл бұрын
Hi Chris found out that you can buy them here at a cost of $495.00 each, which is expensive but I would only need one. Just thought I would let you know regards John
@chrisfix 9 жыл бұрын
John Kinnane Great! Use the discount code to get 10% off. Is that USD or AUS$?
@johnkinnane547 9 жыл бұрын
G'day Cris that is in Aust. Dollars, but it's a good price over here compared with the same type of light. Must post you a picture of my 4WD regards John
@chrisfix 9 жыл бұрын
John Kinnane Definitely post a picture! I would love to see your rig!
@arlindjax 9 жыл бұрын
Nice video, I personally do not have an issue with my reverse lights. Just wondering before you did all of this did you consider swapping the reverse light bulbs for something brighter?
@chrisfix 9 жыл бұрын
Arlind Sadikaj Thanks. I considered swapping the stock reverse lights for something brighter but the wiring isnt thick enough gauge to increase the wattage.
@arlindjax 9 жыл бұрын
Okay, I guess when you said you did a lot of research... You actually meant it.
@chrisfix 9 жыл бұрын
Arlind Sadikaj Yea, I spend way too much time doing research. Like I spent about 10hrs just looking stuff up between different methods to get lighting in the rear and when I realized I wanted aux lights, I wanted to find the best bang for the buck and a lot of light output. You should see how long it takes me to plan out a video, film it, and edit it. It would blow your mind lol
@speaktruth.7458 9 жыл бұрын
Boss!!!
@slbshadow 8 жыл бұрын
Hey Chris, i have one question, and i was hoping youd help me out if you may. I have a 2005 infiniti g35 coupe 2wd and well... I wanted to install another muffler but... My car for some reason when i press on the pedal nicely to take off... It feels like the acceleration is escaping and ive taken it to several shops and they say its my exhaust but... I dont think so... Theyre not stock their aftermarket ones but i rarely use my car and it was changed id say a rough estimate of 2-3 years ago by far, also... How can i unlock my backseat? It folds but its locked in as well as with my trunk... You can say i dont have a trunk right now its locked in and i dont know why... Thank you
@chrisfix 8 жыл бұрын
+Edward leon It could be the cats are clogged or that the cats were removed and the engine isnt tuned for it.
@gatordudes 8 жыл бұрын
Chris, If you ran these at 50% with the right lenses and aimed correctly could they be used as driving lights on the road?
@dmarek9157 8 жыл бұрын
I think it's illegal
@dakotadriggers8838 8 жыл бұрын
you can have them installed, but its illegal to run them on-road.
@Landrew0 9 жыл бұрын
Great business plan! Why use unbreakable plastic lenses, when breakable glass will guarantee that customers will have to come back to you, to pay your price?
@brandonochoa1969 8 жыл бұрын
What about a Rigid light ? how do they compare i know there expensive also ?
@chrisfix 8 жыл бұрын
+Brandon Ochoa I haven't tested Rigid but I know they are really good too!
@toy96 9 жыл бұрын
hey, are there any good legal lights LED or HID (headlight, low beam) that easy to install that don't burn out?
@chrisfix 9 жыл бұрын
toy96 For what car (year, make, model)? There are not really any LED headlights yet that are worth wile, but there are some good HIDs if you have projector lenses.
@toy96 9 жыл бұрын
i have projector lenses 04 acura mdx but philips OEM lights.
@chrisfix 9 жыл бұрын
toy96 Gotcha, well that is great then because you got the expensive part out of the way(with owning projector headlights)! What I would do is not waste your time on ebay. Those HIDs dont last. I have had numerous friends who try them and they blow out in less than a year. I would go to a junkyard and find a car with the HID lights and take them from that car. The OEM HIDs are well built and last a long time. BMW, Cadillac, Lincoln all have them. Try to find one that you can fit into your stock system without messing around with wiring. You might even find an adapter online for your bulb to HID ballasts. Then you dont need to wire anything new. Good luck! I just thought of one more thing. See how much they are from Acura. I know it will probably be expensive, but it is worth a shot. They should have HIDs for your car as an option (I would think) so they should have parts.
@CodysContent 9 жыл бұрын
The warranties are real lmao damn
@aggrex 5 жыл бұрын
High quality bright BD XL LED lights but used for the wrong application. BD makes great OFF-ROAD lights but the large XL size mounted below the rear bumper are vulnerable to be knocked off. Smaller auxiliary LED reverse lights would be a better choice from various top tier brands for reverse function.
@thedragonfarm 7 жыл бұрын
I would really like those but dang $300 a bit out the budget. they are really nice though.
@MrMe-qu4gw 7 жыл бұрын
5:32 when someones tailgating lol
@newcoyote 9 жыл бұрын
"Apples & oranges"? How on Earth did you not say "Like night and day"?
@chrisfix 9 жыл бұрын
newcoyote I know, I know. I was editing it and thought to myself, why did I not say it is like night and day. haha
@newcoyote 9 жыл бұрын
ChrisFix I guess you could claim you were being ironically humorous. Anyhow, thought it was funny. Just subbed. Thanks for the videos. I like your clear, straight forward presentation on repair/service procedure.
@chrisfix 9 жыл бұрын
newcoyote Thanks man! Glad you are on board and subbed! More videos to come so stay tuned!
@tankimus 7 жыл бұрын
Love the lights usage, just so ugly hanging behind the truck. Although great build man.
@chrisfix 7 жыл бұрын
Thanks!
@TxMx214 5 жыл бұрын
I feel like those lights would be much better use if you mount them to the roof rack, visibility will be up by like70%
@CodysContent 9 жыл бұрын
I'm trying to find HID Headlights and idk if im making the right choice. What do you think would be good for a 2007 Honda Civic? I'm looking at SDX Xenon HID Headlight conversion kit (8000k) would that be a good buy or what would you recommend?
@chrisfix 9 жыл бұрын
CodysDesigns Do you have projector lenses or regular headlights? If you have regular headlights you cannot get HIDs. You need projectors first. The projector lenses aim the light so you dont blind people. HIDs are like using your high beams but all the time. If you dont aim them, they will blind people, and you dont want to be that person lol.
@CodysContent 9 жыл бұрын
im gonna sound stupid, but how would i know if i have projectors?
@chrisfix 9 жыл бұрын
CodysDesigns Projectors are a lens that looks like a round, glass ball. Google, "headlight projector lens" and you will see what I mean. A normal headlight has a shiny background and a bulb that reflects off that surface. The projectors use a lens to aim the light. Let me know what you have and we can make some decisions from there. For a Honda Civic, there are so many aftermarket parts if you dont have projectors you can probably easily get them.
@chrisfix 9 жыл бұрын
Is your Civic a coupe or 4 door?
@CodysContent 9 жыл бұрын
It's a sedan, I'm pretty sure they have them
@TypeUsername34 5 жыл бұрын
760!!
@JonathanLaSalle 9 жыл бұрын
Hello Chris; Great video, my name is Jonathan La Salle, owner and operator of JL Sno-Plowing in Marlborough, Ma. I need your expert opinion. I have purchased many light set ups for my Ford F-350 Super Duty and I have damaged every set. I snowplow with this truck and my biggest gripe is the inadequate back up lighting. I mounted my lights under the bumper and they got wiped out either by snowbanks or other vehicles in traffic. I attempted to mount them on the bumper but became an obstacle when opening the tailgate. I just saw your video and love the lights but I am specificaly looking for a light that I can mount on the bumper at either side of my license plate without impeding the view of the license plate numbers. What would you recommend? The four light system may be too large(my opinion). I would prefer a two light system inline vertically. In other words a set of four lights two on the left and two on the right. I want something with the same warranties and capabilities as what you mentioned in your video. I currently have two cheapo halogen lights from Wal-Mart and they have worked the best. They are not weather tight or moisture resistant but after my fourth pair I used a siliconized clear caulking that painters use to seal all of the seams and the screws. The reason why I am in the market for a replacement is because the bezel is made out of glass and after cracking it is a matter of time before water gets in and fizzes the light. Help please! Jonathan La Salle JL Sno-Plowing Clearing the Way, Your Way Marlborough, Ma 01752 jlsnoplowing@gmail.com
@chrisfix 9 жыл бұрын
Hello Jonathan, what I would suggest for your application is some flush mounted lights.You said you only want two lights and flush mounting them will keep them out of the way so here is the perfect product which will be way brighter than your setup now: www.bajadesigns.com/ProductDetail?ItemNumber=481003
@JonathanLaSalle 9 жыл бұрын
Thank you for your response Chris. I will review the product when I get home from work. I am also a Commercial Painter. Have a wonderful day today and keep doing the videos. They are helpful and informative. Excellent!
@chrisfix 9 жыл бұрын
Jonathan La Salle Thanks Jonathan! Let me know if you go with them. I cannot tell you how amazing their products are and with their awesome brightness, satisfaction and lifetime warranty, it makes it worth the extra bucks!
@Viggggggr 9 жыл бұрын
I think one would be good with a 360 light area overd i dont think two is that good because i went blind just watching the video
@chrisfix 9 жыл бұрын
ali amiri haha, the camera pics up light differently than you eyes. In real life you dont go blind unless you bend down below the bumper. It can be dimmed though and there is a switch that I ran into the cab to dim the lights 50% (it will probably increase LED life too).
@GRAMO107 7 жыл бұрын
I'M TRYING TO FIND THE VIDEO WITH THE REVIEW FOR LED HEADLIGHT BULB THAT ADAPTS THE BRIGHTNESS...
@chrisfix 7 жыл бұрын
+GRAMO107 that would be cool
@GRAMO107 7 жыл бұрын
ChrisFix YOU MADE THE VIDEO, I THINK IT WAS HID OR LED PLUG AND PLAY SETTING NO SPECIAL ADAPTER OR ANYTHING, IT WAS SOME MERCH FROM A VIEWER LIKE THIS ONE I REMEMBER THE PRICE LIKE $129.99 IT HAS VARIOUS BULB APPLICATIONS LIKE H7 ECT...
@darkfireBikes 9 жыл бұрын
I don't see the video on how to wire them...
@chrisfix 9 жыл бұрын
RedTeamWolf It isnt published yet. It is coming out next week. I had 4 hours of footage and I am making two videos. A longer video and a shorter one. It has taken 30hrs to edit so far! Crazyyyyy. I hope they come out good!
@mot611 7 жыл бұрын
I put a $35 pair from Amazon on my F150 and they're more that adequate. Also, I bent them over 2x this winter backing into snowbanks. There's no protection down under the bumper. Save you $ for protected areas. Also, Also, they're an EAZY GRAB for would-be thieves. TomJV
@chrisfix 7 жыл бұрын
Thanks for sharing!
@becks431 6 жыл бұрын
Not necessarily true. Baja sells a key set so if someone wanted them, they would need to cut through the steel bracket to get them. In any case, nothing is safe.
@February54 9 жыл бұрын
Is this legal? I mean, making your reverse lights super bright?
@chrisfix 9 жыл бұрын
It depends on which state. When you are backing down your own driveway or you are on a trail or on a boat ramp, it is perfectly legal anywhere. You can also dim them 50% so they are not as bright. The other thing is since they are tucked under the bumper, they are only bright down low so they are not blinding at eye level (and they are flood lights not spots so that is easier on the eyes). The bumper kinda works as a "cutoff". In my state I can pass inspection no problem with these lights.
@justaguy4real 9 жыл бұрын
Ya very expensive wow
@yegdronephotography-7949 6 жыл бұрын
the hate is cause he got sent a pair of $700 lights designed for desert racing and the only use he has for them is reverse lights. why don't you send him a $3000 Canon DSLR too for a dash cam.
@foysal79 3 жыл бұрын
Sooooo
@dandon31399 9 жыл бұрын
I no what made you pick the you got them free
@lachie2002 9 жыл бұрын
Yeah he is advertising there product sadly I like the real "repair" stuff
@chrisfix 9 жыл бұрын
dan don Actually, I picked them for exactly what I said in the video. I could have picked any LED light.
@chrisfix 9 жыл бұрын
lachie2002 It isn't advertising. It is a video review. That is when you have a product and you review it so if people who are looking to get LED lights want to get one, they know what is on the market. I make repair videos all of the time and they wont be stopping. Since I installed the lights, I wanted to make a review video.
@Shiddiots 9 жыл бұрын
You should hook this up to a switch for all the fools that drive with their brights on behind you. By you, I mean me.
@chrisfix 9 жыл бұрын
Shiddiots A switch is in the works! I need to put some diodes to prevent current from lighting up the reverse light when it is engaged!
@Shiddiots 9 жыл бұрын
Awesome! I'm planning on doing something similar but near the 3rd brake light or on my roof rack and have it switch only. Baja Designs are the best in the biz so good choice!
@Alxm225 9 жыл бұрын
Now how would you wire this to a switch so that its used for tailgaters to get the point to get off my ass?
@chrisfix 9 жыл бұрын
***** hahaha, you just run a wire with a switch in it from the battery to the relay. Really simple!
@jasonbilow2877 9 жыл бұрын
Nice lights man! Love me some better back up lights but these are ouch to the wallet. I did try something much cheaper on my ranger, got some led bulbs for backups from buggman and they are alot brighter for sure, big bulbs just barely fit in the housing. I also added some brake/turn signal strips he sells which I love these! img.photobucket.com/albums/v187/savage03/My%20Ford%20Ranger/20140822_215352_zps0ffcbb27.jpg Quick video I did on the strips. vidmg.photobucket.com/albums/v187/savage03/My%20Ford%20Ranger/MyMovie_zps69bd41ba.mp4
@chrisfix 9 жыл бұрын
Jason Bilow That is awesome! Those reverse bulbs seem pretty bright! I like the turn signal strips! How did you wire it?
@jasonbilow2877 9 жыл бұрын
ChrisFix Yea I love the strips and wasnt to spendy, wanna say he charged like $20 or so think it was 2ft each side. Easy to wire really, I went in behind each housing and tapped into the ground and brake wire. Should get a shot of the reverse while in the drive way to see them on the ground, I was backed in and were on a slope.
@chrisfix 9 жыл бұрын
So you just used the brake power line to power it? I guess they dont draw many amps
@jasonbilow2877 9 жыл бұрын
ChrisFix Yes, I could have gone to the trailer plug but didnt wanna run down to it or tie it up if I ever needed it. Their bright tho dont seem to effect anything.
@bizbp408 8 жыл бұрын
great video but at $300 per light is insane!! they better be dipped in gold! GTFO with that price... 🤑😱😵
@chrisfix 8 жыл бұрын
Thanks!!! Yea they make better lights now that are a lot cheaper. This is when LEDs first came out. Now the chinese lights are comparable!
@28mars 8 жыл бұрын
I do not know 1 person that would spend $600 for Aux lights. Way to much cost for what they are.
@chrisfix 8 жыл бұрын
Because I need them for hauling boats and on the trails.
@28mars 8 жыл бұрын
+ChrisFix cool, I am sure there is a use for them. Good job on the videos!
@codymatthew2493 7 жыл бұрын
Rick Hagen these are offroad lights. Mainly designed for desert racing. Shit I'm just a mild off-roader and there's about 900 bucks in aux lights just on the front of my truck :/
@skhochay 9 жыл бұрын
dude , not a good spot to mount them, you will rip em off
@garrisonaw 8 жыл бұрын
I was thinking the same thing. If it were me, I would either mount them in the step of the bumper (and relocate the license plate - but that creates new issues), or cut out custom openings in the bumper and mount them inside the bumper. That would provide the best protection for them.
@lezbriddon 9 жыл бұрын
Damn you! I was feeling in a crappy mood so was ready to moan at anything and here it was, yet more crappy led lights, and then they turn out to look really really good! how could you! now i need something else to moan at as i dont feel moaned out yet! oh hang on, yeah that was a bit of a moan, so i kinda do, damn these lights. go review some crappy ones ebay is full of them!
@chrisfix 9 жыл бұрын
lez briddon Haha, sorry you couldnt moan about the lights. These things are awesome!!! I want more now for the front!
@Longday709 9 жыл бұрын
EBay has the authentic ones for $320-$360 EACH! Still way too much for me, nice lights though.
@chrisfix 9 жыл бұрын
Rob Parker Yea, it is pricey, but the quality and light output is amazing. The way I look at it, you can spend $150 for a light bar on ebay and in a year you will need a new one, or the light output will diminish. These lights will last forever, and if they break, you get it fixed or a new one for free. Plus, they are insanely bright. But yea, it all depends on what you want/need/can afford.
@Longday709 9 жыл бұрын
ChrisFixThat's true and those light bars are pretty bad from what I have read. Those things are like God light, the before and after is like night and day. I actually laughed out loud when you turned them on. Editing looks great by the way.
@chrisfix 9 жыл бұрын
Rob Parker Maybe I should get one and do a review on one of those lights and see the difference. It is one thing to hear stories and it is another to test it out yourself! And thanks for the feedback. I am just starting up these video reviews so I want to get feedback and see what needs to be adjusted and what is good!
@Longday709 9 жыл бұрын
ChrisFix I am in a couple F150 forums and I hear (read) good and bad, but there seems to be 2 constants, CREE LED's are good, and everybody wants more exterior lights. What makes it a CREE LED exactly? Its a type of SMD LED on a board and its a brand depending on who's telling the story, everything cant be CREE, but everyone claims to be selling them. So what makes a $200 or a $50 CREE (I should be using quotes every time I type CREE) I am going to install a single 2" "CREE" 10watt, 1200LM light, 3 year warranty, flood pattern, sealed metal housing, $40 on EBay, US stock, same looking light from China is $18, there has to be a difference so I will buy one of each and see. Its under $60 for both and since I solved my reverse light/backup camera issue with 2 projector reverse LED lamps in my truck, so its just something to play with. Did you tap your taillight wires for the relay or your trailer hitch wires, if you have a hitch? I cant tell, the lights are too bright. Also, did you add the dimming switch? Where did/will you mount it? I like your work don't get me wrong, these are just to expensive for a lot of people, myself included, more like toy when that money could do a lot for most vehicles. I think that's where the negative or harsh feedback is coming from. One day we watch you make your own penetrating fluid to save some cash, now you have $500 lights under your bumper. I think you sought these out and bought them, some may think they were a "gift", LOL. A daylight LED test will show you a lot, inside or out.
@chrisfix 9 жыл бұрын
So all CREE is, is a company. They make all types of LEDs. Chip style LEDs, bulb style, etc. They are supposedly at the forefront of the technology and made a name for themselves a few years back in marketing properly and I am sure they are good because everyone uses them. The LEDs are not really the expensive part, the research and development in getting a bright led to not overheat is tough. These LEDs get HOT! That is why you see light bars with a bunch of small 3w leds instead of just having two, 100w leds. If you can figure out how to cool a 100w led in a small space, like the size of the Squadron lights, or even a little bigger than that, let me know and we will be rich! The second most expensive thing in the R&D is making the housing for both cooling but also to be strong and waterproof. The ebay lights fail because they will get water in them. That kills the lights. Keep me posted on your LED comparison. I am curious the difference! As for the install, I will have a video up next week on how I did everything. I tapped them into the reverse lights not the tow package (since not everyone has a tow package).
@VegaGT500 9 жыл бұрын
Worter? Water? Ruff, roof.
@chrisfix 9 жыл бұрын
VegaGT500 lol funny
@joem1767 6 жыл бұрын
$314 a piece?! Get the hell out!
@legendfpv 4 жыл бұрын
Let's see it side by side with some cheap lights. Sure you get what you pay for, but this overpriced.
@cheabosscray1650 5 жыл бұрын
Xl as reverse lights. The hell is wrong with you lmao
@lachie2002 9 жыл бұрын
Lol he deleted my comment saying that he is advertising which he is
@chrisfix 9 жыл бұрын
lachie2002 Dude your comment is still there. I dont delete comments unless they are inappropriate. You can believe whatever you want. You seem to follow my channel and I have made a lot of how to videos that I am sure has taught you and has helped you. How about a little support instead of this trolling attitude?
@Viggggggr 9 жыл бұрын
Umm he is giving his opinion you know freedom speech one of the most basic laws ever .
@wolfeman351 9 жыл бұрын
ali amiri His opinion is not the problem. He accused Chris of deleting his earlier comment which would have been censorship and was not true. That is trolling. Even if this was an advertisement to get a cost break so what. As long as the lights are as good he says they are we benefit from it. Find any how to videos where the creators don't advertise something now and then. Nice video. Thank you for taking the time to make it.
@chrisfix 9 жыл бұрын
wolfeman351 Thanks a lot man! I appreciate the comment and support!
@lachie2002 9 жыл бұрын
The Ali Amira for the support, and where do I see my old comments they arn't there and I don't care. Also I'm just making a point for others that the company is paying you to do all these "advertisements" because other wise you wouldn't be doing these.
@wetguavass 8 жыл бұрын
Made in the America? America is a continent, not the USA.
@chrisfix 8 жыл бұрын
Thanks for the clarification!
@MatrixGuardians99 8 жыл бұрын
North America, Central America, and South America are officially recognized as the continents.
@Cliffdrop1 7 жыл бұрын
MatrixGuardians99 actually you're wrong there my man.. Central America has never been recognized as a continent.. Remember the 7 continents from school? North America South America Africa Europe Asia Australia Antarctica.... that's all of them. There are no others!
Baja Designs LED Lighting | Offroad LED Light Bars & LED Lights
Рет қаралды 642 М.
Linus Tech Tips
Рет қаралды 2,4 МЛН
CNET Cars
Рет қаралды 189 М.
BMW GSA 1250
Рет қаралды 4,9 МЛН
PDRGARAGE SPB
Рет қаралды 1,9 МЛН
cylinder head cracked & leakage checking #amazingtechnique #mechanic #engine #trending #viral #short
Truck Care TV
Рет қаралды 2,4 МЛН
Мотор и Колёса - питбайки, квадро, эндуро
Рет қаралды 694 М.