Super Cheap D.I.Y. refills for Soda Stream

No video

Super Cheap D.I.Y. refills for Soda Stream

Рет қаралды 15,776

2 жыл бұрын

US $6000 Chinese chopsticks - amzn.to/3pvZexo
Please support my Channel Patreon www.patreon.com/browneye?fan_...
CESARIAS M181.5 Thread Replacement Valve CO2 Tank Brass Pin Valve for Soda Stream - amzn.to/485POfH
5 lb. Aluminum CO2 Cylinder - amzn.to/47Nfezc
Please consider supporting my channel / browneye My Facebook: / My Instagram - /

Пікірлер: 46

@andrewsturmey 2 жыл бұрын

Six minutes in before a safety warning! Back when I was a child, I really wanted our family to get a Soda Stream, but alas my dream was never realised. Maybe it's time I got one. Thank you for the tip. Great video.

@BrownEye 2 жыл бұрын

Oh my, do get if it's only on sale. Believe in or not I've been using it since my childhood with those little glass bottles. Never exchange those expensive co2 bottles again. Thanks for supporting my Patreon and being awesome !

@neosrt10 2 жыл бұрын

Soda pop showtime with Brown eye nice video bud step by step 👍

@potptvpatsonthepulse5701 9 ай бұрын

You are a LEGEND, Thanks for this simple yet ingenious idea!

@BrownEye 9 ай бұрын

Thanks for being amazing.

@xavyre 2 жыл бұрын

Have to add that that is a great thumbnail lol. You look like a mad scientist.

@BrownEye 2 жыл бұрын

Those bottles became freezing cold quick.

@louiselovitz4141 2 жыл бұрын

Thank you SO MUCH!! You just gave the easiest demonstration on how to re-generate the Soda Stream CO2 container!!!

@BrownEye 2 жыл бұрын

Just like a Cheap printer with the expensive ink ! Thanks for being awesome.

@gavnonadoroge3092 Жыл бұрын

thank you

@BeastNZ 9 ай бұрын

8-16mm pellets are the best to fill the bottles, just drop them in, the longer they are the better, no smashing or need a funnel, also fitting uses a 24mm (15/16) spanner also dont need to undo the release screw, once low in gas, the pressure you low, you can just release by press the tab on top, or even just unscrew the fitting and release that way, any questions just ask, I use to do this all the time

@hecate235 9 ай бұрын

Dry ice pellets are impossible to find in my area -- and heaven knows I tried. But you lose a lot of CO2 while mashing it down small enough to get through the funnel.

@BeastNZ 9 ай бұрын

@@hecate235 how much do you pay for dry ice and how much do you get?

@hecate235 9 ай бұрын

@@BeastNZ Package sizes vary, and run about $7/lb. Since the cylinders are 14.5oz, i try to buy about a pound. What i had to learn, and other clips din't tell me, was I needed to use a plastic funnel, First time, using a metal one froze to the cylinder, i couldn't seal it up, had to wait for it all to defrost -- and so lost all the CO2.

@BeastNZ 9 ай бұрын

@@hecate235 arrh yes you need plastic funnel, use plastic or wooden utensils, dry ice reacts to metals. use chopsticks to free up hole in funnel when it becomes blocked, weight it as you go, overfill it slightly as you will loose some when tightening up fitting, also use closed, bottle becomes very cold

@Outdoor-Adventures Жыл бұрын

I never thought you can replace the co2 gas with dry ice .

@BrownEye Жыл бұрын

Dry Ice is frozen carbon dioxide. Unlike most solids, it does not melt into a liquid, but instead changes directly into a gas.

@FightTalk101 3 ай бұрын

whats dry ice ? where can you buy that

@xavyre 2 жыл бұрын

Would a blender work better for making the ice finer?

@BrownEye 2 жыл бұрын

Tried a blender, much simple to smash it !

@jessiehorne 2 жыл бұрын

Nice trick indeed ☺️👍

@BrownEye 2 жыл бұрын

Lots of $$ saved.

@jessiehorne 2 жыл бұрын

@@BrownEye Indeed

@BubuH-cq6km 2 жыл бұрын

😎 👍🏼

@dzerres 11 ай бұрын

I skipped around you video (needs tighter editing) ... did you ever mention the cost of the dry ice?

@carmenlombardi7955 2 ай бұрын

Get a bigger funnel use heat shrink .

@Jessehernandez83 Жыл бұрын

How long does it take to melt

@BrownEye Жыл бұрын

Usually 2 hours at the back porch.

@michaeljorgensen790 9 ай бұрын

It doesn't technically melt. It sublimates. Frozen CO2 goes from a solid directly to a gas without becoming liquid. The cylinder will frost up on the outside when it is initially filled but when the frost is gone most of the dry ice has turned into gaseous CO2. You actually can start using it while it is still frosted because as soon as you seal it it starts to pressurize the cylinder.

@TL.... Жыл бұрын

where did you get the dry ice

@BrownEye Жыл бұрын

Check out Linde dry ice. It's available worldwide.

@TheAgentAssassin 9 ай бұрын

Most grocery stores have it in a freezer by the cashiers. Ours does!!!!

@slowrvr 6 күн бұрын

@@TheAgentAssassinyou sure? I’ve never seen dry ice available outside of medical or industrial suppliers

@19645pat 9 ай бұрын

Thanks for the tip, but pls wear gloves man. :)

@annespellberg7173 Ай бұрын

Huh. So dry ice is CO2? Interesting.

@datmeme8967 11 ай бұрын

Turning with a wrench is not "finger tight".

@bonghungk7544 2 жыл бұрын

Sorry man too much hassles. I’ll just buy soda pop at the grocery store particularly no name brand ones for saving $$$

@BrownEye 2 жыл бұрын

You have a point.

@otiselevator7738 11 ай бұрын

Unless you drink a LOT of soda pop. Then, HUGE quantities of cans and bottles. No thanks.

@lvstream720 10 ай бұрын

I have seen many videos showing this dry ice method. But no one have shown the performance in the machine afterwards. I am also curious if anyone have tried to use a funnel and fill the tank with sodium bicarbonate and citric acid granules. Add a few ounces of water and seal the bottle. To see if the mixture would pre-charge it a little.

@lvstream720 10 ай бұрын

I think sparkel avoid all this work