No video
Super detailing Darth Vader AMT/ERTL TIE Advanced Star Wars model
Рет қаралды 9,597
4 жыл бұрынThis is the ancient AMT/ERTL about 1/35ish scale model of Darth Vader's TIE Advanced, it's even older than me!
I bought this on spec on eBay, was partially assembled but decided to upgrade it using the Bandai 1/72 version as a reference.
Many nights were spent puttying, fixing seams and bad fit before "greebling" with lots of spare parts from my Star Destroyer build (1/700 and other scale ships), plus plenty of Evergreen styrene stock.
@greenrage27 7 ай бұрын
I love that you took an iconic ship and mixed authentic design details with your own personal touches. I painted up my Hasbro TIE Advanced with totally unconventional gloss paint. I figured why not, and I'm thinking about trying my hand at remolding the hatch and cockpit window eventually. I love your addition of greeblies as well. Really catches the interest and shows up the surfaces.
@beckersmodels 7 ай бұрын
Thanks - I did something similar with my TIE kitbash recently, using the Bandai kits, much fun!
@occamsrayzor 4 жыл бұрын
Nice job! I had this kit many moons ago, but it disappeared into the mists of time. Resurrecting an old kit can be a lot of fun.
@yellowcake1320 4 жыл бұрын
When I watch your videos I feel like your talking directly to me. I'm expecting to hear "Joe" at the end of each sentence Looks awesome.....nice build
@beckersmodels 4 жыл бұрын
Thanks for that Joe! I think I'm getting the hang of this talking to camera thing, I'm trying to do exactly that - just to talk to you mate! Cheers, Chris
@jimsmalleimb7709 Жыл бұрын
Just a little hint: None of the studio TIE models were weathered, and also, the colour that closest matches the original is Tamiya TS-32 Haze Gray.
@beckersmodels Жыл бұрын
I did mention the lack of weathering in the video I think? But its my interpretation, wasnt going for screen accuracy with this build....
@RobotJeeg 4 жыл бұрын
I'm writing this before watching the video because I'm too excited! I started this kit too! I did loooot's of modifications. But I also geve up trying to improve som ares too wrong to be fixed! So thank you for this video! I will check it frame by frame to see how you solved all those wrong parts!
@beckersmodels 4 жыл бұрын
Well I hope you've watched it and have taken away a few ideas for your project. The main problem is getting the alignment right on the hull halves. My kit was already half assembled and I could never get the wings lined up properly either due to the poor alignment. Take your time on the internal parts either side of the cockpit pod or everything will be off! Good luck, Chris.
@sarlaccbreath7701 2 жыл бұрын
Great work! Glad you chose more visually accurate colours instead of leaning towards the blue tones. This is the way is see it on screen. Brilliant man
@beckersmodels 2 жыл бұрын
Thanks - yeah I got a bit tired of seeing blue TIE Fighters everywhere, its like seeing blue Panzer grey all the time - although it can look visually good sometimes. I'm halfway through kitbashing a TIE Advanced 2.0 (essentially TIE Interceptor wings on the Advanced body), not sure if anyone wants to see that though....cheers Chris
@sarlaccbreath7701 2 жыл бұрын
@@beckersmodels that’s sounds really cool- I hope you post the video!
@772ModelGarage Жыл бұрын
Loved the video, I also subbed to your channel.
@beckersmodels Жыл бұрын
Thanks Glenn, Ive got some more Star Wars goodies coming soon...cheers Chris
@EagleSciFiModeler 4 жыл бұрын
Nice work!
@MojoDevirus 4 жыл бұрын
Niceeeeeeeeeeeeeeeeeeeeeeeeeeee !!! Well done.
@StacyRNix 2 жыл бұрын
How much to paint my Kenner Vader tie fighter like u did this model. I am not a very good painter???
@arcort669 10 ай бұрын
How many coats of gloss varnish do you use before brushing on the wash?
@Steevels 4 жыл бұрын
Awesome build, I have a similar one (not with the flight disk) in my stash. What's your mix ratio and pressure settings for the dull coat?
@beckersmodels 4 жыл бұрын
Hi Steevels - I think I used about 50/50 with mr levelling thinner on the dullcote, about 20PSI, cheers Chris
@michalbruski1777 2 жыл бұрын
What proportions did you use xf-83 and xf-19 on the first marble coat ?
@beckersmodels 2 жыл бұрын
I think it was one to one for the marble coat Michal, hope that helps. Cheers Chris
@gerardofollano8417 3 жыл бұрын
Nice detail upgrades just wrong colors
@beckersmodels 3 жыл бұрын
Thanks? I did say I chose my own colours. I don't really care what the on screen colours are like, this is my interpretation of what it could've looked like...cheers, Chris
@gerardofollano8417 Жыл бұрын
@@beckersmodels BTW you glued the top hatch backwards
ModelChili Scale Models
Рет қаралды 57 М.
Toy Polloi
Рет қаралды 19 М.
Star Wars Comics
Рет қаралды 2 МЛН
hpiguys Workshop
Рет қаралды 37 М.