Super Glossy Finish Polish on Prototype and Master Parts, for Designers and Makers

No video

Super Glossy Finish Polish on Prototype and Master Parts, for Designers and Makers

Рет қаралды 16,346

Күн бұрын

Thanks to our sponsor PCBway: www.pcbway.com...
Wet sand primed 3d printed rapid prototype parts, paint base coat and cover with clear top coat two part urethane, sand the topcoat and polish too a high luster mirror finish.
Products used in the video
3M 51056 Purple polish: amzn.to/3hp878w
Graco Finex 1000 Mini HVLP spray gun: amzn.to/3e2DMrz
Urethane Automotive 2 part urethane Clear Coat: amzn.to/3bQSlwJ
Black Skintx Latex gloves: amzn.to/3jQuwKH
Dupli-color Primer: amzn.to/3bJdNa7
Dupli-Color Gloss black: amzn.to/2R9vF6V
Dupli-Color wax and grease remover: amzn.to/3uRa3uo
Tack Cloth: amzn.to/3br2O4Z
Blue Tape three pack: amzn.to/3w6LcDb
Drill mount foam polish pad: amzn.to/3hptA1e
1000-3000 grit wet dry sand paper: amzn.to/3bmfEBp
2K clear in a rattle can: amzn.to/3bvvJ7N
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
.03 styrene white www.ebay.com/i...
.03 styrene black www.ebay.com/i...
.06 styrene black www.ebay.com/i...
.06 styrene white www.ebay.com/i...
Luer lock bottles with needles
www.ebay.com/i...
Arteza Products goo.gl/v9Lda3
Arteza 24x36" Self Healing Rotary Cutting Mat goo.gl/qiXukm
Music: end credits Rurlyok
rurlyok.bandca...
Contact me through www.botzen.com for design work,
you can follow me on:
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com
#resincasting#urethanecasting#resinpour#polyurethane

Пікірлер: 66

@royschuchmann3886 3 жыл бұрын

Eric, one can't find many top-professionals like you on KZfaq - I really appreciate your content!

@andy-in-indy 3 жыл бұрын

For people who don't have the space or money for an air compressor and spray gun, Spray Max has some 2K (which means 2 part) Clear Coat in a can that works really well, too. A two part clear coat like Mr. Strebel is suggesting is much harder and also hardens much more quickly than a regular gloss coat, which makes it easier to polish than a regular spray on clear coat like you get at a hardware store.

@EricStrebel 3 жыл бұрын

Yes, good info, you are correct, thanks for sharing!

@spamspasm8183 3 жыл бұрын

3:00 Listening to these "thuds" on my home theater speakers makes me feel like I'm watching a Hollywood blockbuster instead of a parts processing video. Awesome.

@EricStrebel 3 жыл бұрын

🙂👍

@t1mmy13 10 ай бұрын

Was typing it out anyway thought I'd share it. Shopping list: - 220, 320, 400, 600, 1000, 2000, 3000 grit wet sanding paper - Wax & grease remover (soy based?) - Tack cloth - Polyurethane top coat clear - 51056 purple polish - Some latex gloves (personally added) Steps: 1. Multiple layers of primer, work way up in grit of sandpaper 2. Light first coat of paint 3. Heavier second coat of paint 4. Light base coat of clear 5. Heavier second coat of clear 6. 1000 grit sanding 7. 2000 grit sanding 8. 3000 grit sanding 9. Polishing with 51056 Do I have that right? No sanding between clear coat steps right? Now only to win my biggest challenge, patience :)

@EricStrebel 10 ай бұрын

Correct, good luck!

@user-cq3jy8vr8h 7 ай бұрын

THANKS!!!

@brianhalicki4078 3 жыл бұрын

I don't even need a part with a glossy coat, but after watching the video, I'm going to give it a try!

@smitauke 3 жыл бұрын

Eric 1) Do you only get this texas pick up finish? Eric 2) but you want this super glossy nice finish? me: I do not even get the first.. o.O

@jwonderfulsuccess Жыл бұрын

Glad I found this channel. Dudes getting busy!

@Rouverius 3 жыл бұрын

Whoa. That is a beautiful mirror finish! Thanks for the tutorial!

@EricStrebel 3 жыл бұрын

Your welcome

@Tarbard 3 жыл бұрын

Nice finish, I think this is what they call a piano finish.

@fernando749845 3 жыл бұрын

Haha who would give this a thumbs down? This is awesome!

@EricStrebel 3 жыл бұрын

Thanks, I can't figure it out either

@EricStrebel 3 жыл бұрын

Oh my gosh, that's frucking funny! Rock on dude!

@edthomson5 3 жыл бұрын

Eric, great video. Loved the reference to the hillbilly driveway Texas pickup finish. I hope all is well with you. I hope that hand healed up so you can get back out on the ice.

@EricStrebel 3 жыл бұрын

Yup, all healed up! Skated last night to victory, even got an assist. Hope you are well too

@juliocesarcorralesardiles3689 8 ай бұрын

damn, I didn't know Johnny Lawrence was such well versed designer and maker

@HerrHeisenheim 3 жыл бұрын

Thanks for the video, very interesting tips ! I've ordered some 3M Purple Polish to test it, it looks better than the automotive polish I find at my local store. There isn't probably any magic formula for this but do you have any tip for sanding/polishing internal corners or concave surfaces, such as the inner side of the parts you show, or an embossed logo for example? I've experimented with a vibration tumbler and fine polishing media (400 to 1000 grit silicon carbide powder) but that didn't give good results.

@EricStrebel 3 жыл бұрын

It probably needs to be done by hand

@RyanStone143 3 жыл бұрын

Awesome information, Thanks!

@EnmascaradoMakes 3 жыл бұрын

Beautiful!

@konturgestalter 3 жыл бұрын

Excellent!! Thank you Eric. REally great tutorial. Could you make an more indepth one on how to polish up clear plastic parts that have scratches? I restore old computers and they have e.g. on cassette decks clear lids that are scratched, or old LCD covers on the gameboy. Could you show how to refurbish them?

@zecacador91 Жыл бұрын

Amazing video! Thank you!

@isidoreaerys8745 3 жыл бұрын

Excellent

@garagemonkeysan 3 жыл бұрын

Great video, love the editing and sound effects. Cool about PCB Way. Can see you ordered some clear parts. Did you injury your hand dealing with internet trolls? : ) Mahalo for sharing!

@EricStrebel 3 жыл бұрын

Injured my hand playing hockey, sheared the tendon off from the index finger top nunkle, has completely healed in 8 weeks with no surgery required

@garagemonkeysan 3 жыл бұрын

@@EricStrebel Yikes. Glad you're all healed. : )

@stuartkorte1642 3 жыл бұрын

Great tip on using glue gun and stick. Good idea using drill press as a buffer/polisher. What RPM do you run?

@EricStrebel 3 жыл бұрын

900rpm

@orvenbarreyro400 3 жыл бұрын

So 900 and not 1000rpm that you put on the video(6:40min)?

@EricStrebel 3 жыл бұрын

I think the chart says like 960 or at like that

@mikex691 2 жыл бұрын

Perfect !!!

@VivekGuptaIn 3 жыл бұрын

Hey Eric, thanks for posting this. Awesome video. I create IoT prototypes. The place I live, it is difficult to get can primers. Could you point out how we can get this done using a air compressor based spray gun?

@EricStrebel 3 жыл бұрын

Buy primer in a quart can, dupli color sells it

@BriqueStudios Жыл бұрын

You’re amazing thank you

@impossiblewhopper1691 3 жыл бұрын

hi, curious why we would use can primer and paint if the HVLP gun was used for clearcoat

@EricStrebel 3 жыл бұрын

Just easier, the primer in cans and I don't have to mix or clean the gun every time. Plus the HVLP is only for clear.

@PhG1961 3 жыл бұрын

Impressive !

@EricStrebel 3 жыл бұрын

Thanks, just some patience and practice

@PhG1961 3 жыл бұрын

@@EricStrebel Indeed, I've done some sanding myself on car bodies... still your products and methods are different and very inspireing !

@cyprusmiraque Жыл бұрын

So should it still be fine to use a sanding block with a curved surface like a helmet?

@EricStrebel Жыл бұрын

Use something flexible

@philipjensen6442 2 жыл бұрын

What would be the work flow for 3D print with a matte paint finish? Just no polishing?

@EricStrebel 2 жыл бұрын

Correct, just sand to the desire gloss needed

@psibitful2 2 жыл бұрын

You can probably speed things up by applying the paint with an airbrush, so that you have a nicer base texture to start with. Then sand very carefully, spending less time on corners.

@Adrian-wd4rn 3 жыл бұрын

Shouldn't you let the base coat fully dry for like 15 minutes?

@EricStrebel 3 жыл бұрын

Yes, overnight is best

@Adrian-wd4rn 3 жыл бұрын

@@EricStrebel that's an awfully long time, especially right before a crit.....One juicy coat should do 30 minutes before :D

@vincenthamilton4792 3 жыл бұрын

What is the name of the song at 4:08? Great video by the way!

@Randomdudeinamerica 10 ай бұрын

Primer dry times?

@EricStrebel 10 ай бұрын

Read the can's directions

@lsg1Entertainment 17 күн бұрын

Can you hand polish?

@MeasAgun 8 күн бұрын

Only the helmet!

@lsg1Entertainment 8 күн бұрын

@@MeasAgun is that a serious answer??🤣

@MeasAgun 8 күн бұрын

@@lsg1Entertainment Nope! 😂

@Rjacket Жыл бұрын

What is your process for more organic shapes?

@EricStrebel Жыл бұрын

The same, perhaps some different shaped pads.

@StasonKalbason 10 ай бұрын

Молодцом!

@markkoons7488 3 жыл бұрын

Tell us, please, why you thought it was a good idea at 04:11 to subject our entire household (2:06 AM} to loud and obnoxious noise.

@EricStrebel 3 жыл бұрын

to wake you up and pay attention

@markkoons7488 3 жыл бұрын

@@EricStrebel You mistakenly suppose we arrived at your site by allowing KZfaq to feed us what it will. I'm a subscriber because I want to learn what you are willing to teach us. Incidentally, I've never failed to learn a great deal from your videos and I thank you for them.