I see... the aluminum foil with the super glue helps you put your hinge on crooked. Nice!

You did not just risked yourself and taught kids to risk themselves getting electrocuted to smithereens to save $2 bucks ? Dude.

You forgot to mention that the LEDs inside the lamp is at HIGH mains voltage (depending on lamp design) since there uis no galvanic isolation and pose a SERIOUS risk should you inadvertantly touch any of the components on the PCB. Do not try this at home!

Thanks, thats 6 mins I'll never get back.

For number 2 use a few toothpicks and a bit of wood glue or even simple white glue.

Great hacks except for #4 which is downright dangerous.

Do not solely rely on the switch before starting to remove the LED. Most of the switches cut the current on one line, therefore if you connect the switched line to Neutral (you have 50% of chance) then the live line will not be interrupted and you may get a shock when you touch the burned LED (depending on the position of the LED on the LED string, especially if it's close to the high voltage side) with a conductive tool. Totally unplugging the system from the mains is the best choice.

Better way to do #2, just fill the existing hole with superglue, let it sit overnight & screw the hinge back in place. The fiberboard will absorb some of the superglue, the rest will harden in place, and you'll have a small dimple in the center where the screw goes. For hardwood doors, use superglue or wood glue and a toothpick or small diameter dowel.

On #2, you could have just stuck toothpicks in the original holes and screwed everything back in place. The screws create new threads in the toothpick as you screw it down. Much easier than what was shown here.

Do NOT use salt to clean your sterling silver! Salt might work on steel but it will darken your silver and you might not be able to fix it without a jeweler doing it for you. Cleaning silver is putting crumpled aluminium foil in a dish, add the sterling (.925 stamp) silver you wish to clean, then baking soda then hot water. I don't think the order matters, this is how I do it. It doesn't take an hour and you can watch the tarnish diminish within a minute. Contact with the foil is important so you might want to use fresh foil, fresh hot water and baking soda, turning the silver over so all of it contacts teh foil with the baking soda. Then rinse in clear water and dry. This also cleans the crevices of intricate designs. I've used it for years.

WTH am I doing with my life??? 🤔🤔🤬🤬🤬

Thank you, very useful tips with things at home. Great when you're in a hurry or for an even elderly woman on their own .

I roll up aluminum foil into a ball to clean the grates in my charcoal grill. Works great.

If you wish to clean Silver Jewlery or Silver plated utensils, put Aluminium foil in a basin, pour in hot water that has Sodium Bicarbonate dissolved in it & then put the Silver objects in so they touch the Aluminium. Wow! they clean immediately as they touch the foil.

Being raised in a poor family, I can dig this. Hell, the way the political future looks, ALL OF US are going to need survival tactics. 😢😢😢

"Wow, this video blew my mind! Using aluminum foil and super glue to fix various items is such a genius idea. I never thought these everyday materials could be so versatile. Can't wait to try out these hacks myself!"

To the first “tip” - steel wool would do the same job cheaper…😉

Thank you Creativeholic for this handy video. Thank you to the Community Members who also provided useful information as well. Best Wishes to all of you!

Your ingenuity is purposeful and boundless!!! Keep it up!!! Genius and waste not want not are always appreciated!!! Robert W Goodwin MD aka Db

Some interesting ideas. I’m not sure I’d take the time to deal with an LED bulb like that though. It was still a “shaky” lightbulb. That would drive me crazy.

You are amazing man! We look forward to teaching you new tricks. Sincerely yours from Iran

That LED isn't going to last without the proper ohms

Since you had a soldering iron as in #6, why didn't you just use that to fix that LED bulb? A single drop of solder bridging the pads for that bad LED is all it would need. However gluing a piece of foil over them will result in a poor mechanical connection when the board heats up, and possibly even a high-resistance connection that will heat up and possibly start a fire. Use the right tools and methods for the job.

I clean my aluminum foil with aluminum foil so I can reuse it. When the aluminum foil i use to clean the other aluminum foil gets dirty i take another piece of aluminum foil & use it to clean the aluminum foil that i use to clean the aluminum foil so i can use it again.😊

Thank you for all these exemples. With these knowledge i can make a lot of repairing

These diys are what keep me up late at night. I also 'travel' a lot, lol

Gary from Oklahoma USA Thumbs Up!

This is someone who loves AU foil!

I'm from Brazil and thank you for creating this public service channel, it's a 10....👏🏻👏🏻👏🏻👏🏻👏🏻

De Valladolid, España Adelante. Os vemos con gusto.

Also great for cleaning bbq grill, reflecting/directing wifi signal, and emergency auto fuses (good excuse to always have gum in your car.

いいもの観ちゃった！ ありがとう！

super glue costs more than the led bulb

شكرا لك على هذا الفيديو المفيد انا من الجزائر

Good time, teacher, your works are really beautiful 💖🤌👍🌹 and unique 💖💖

Using staples is a great idea!

Thanks for your ideas. It is very useful for me. I'm from Ukraine.

Hola. Saludos desde Medellín-colombia. Muy interesante los videos. Se aprenden muchos trucos.

That loose illumination LED didn't necessarily need to be removed. A quick dab on either side with a drop of new solder would have gave it new life, if it was loose due to insufficient solder.

It was very informative and useful, thank you dear ❤

Excellent examples and demonstrations. Very usefull thank you

Thank you, my friend, and I wish you good luck and success

بنده از ایران بیننده برنامه‌های آموزنده شما هستم بسیار عالی و آموزنده

LIKE if you wanted him to put superglue in the silver chain (bracelet) too!

I have benefited a lot from these videos, thank you

This guy can fix any thing, wow🎉

Muy buen vídeo repleto de excelentes ideas, gracias por compartir.

Good video prayers for you and yours

How I miss beeswax candle-light and Brahms' piano works, summer roses and cherry wine, and reading Shakespeare around a circle with kind-hearted souls who think "AI" is a diphthong when sounded, and a ligature when printed. When did civilization stumble? Who will help it to its feet . . . ?

thank you for sharing this video to view it is very clever ideas I wish this channel more success

Bombaaaa very good man Thank You Very Much🙂

I use aluminium foil to clean the aluminium engine casings with aluminium cleaner

If the switch at 3:00 min is SPST, you should be at danger... It should be DPST switch. Or you have to disconnect the plug from the main socket.

Great....and aluminum tape is my personal god of cheap fix great strength and best if two or three layers are used, small wrinkles are like ribs of strength

I'd use a wooden dowel or wood shavings & wood glue let dry then screw the hinge in for number 2. The led light trembling and flickering like that is not something I care to have in the house, it would make me batty. Cool other wise, thanks

سلام از ایده‌های شما استفاده می‌کنم و بسیار علاقه‌مندم من این روش را تجربه کردم و عمر لامپ‌ بعد از تعمیر کمتر از ۷ روز مجدد می‌سوزه،ولی این روش برای لامپ‌های بالاتر از ۲۰ وات بسیار مفید و عمر لامپ طولانی‌تر است. موفق باشید💐

Thanx for your great tips.

I'm from Iran❤❤❤❤❤❤❤❤❤❤❤❤❤

Nice hacks; hopefully no one electrocutes themselves fixing a light bulb.

Step 4: How to burn your house down while you're asleep.

잘 봤습니다 😊👍

That sounds interesting! What's the purpose of pouring glue on aluminum foil? Is it to create a new super adhesive or just to test the glue's features?

Molto interessanti le idee che ci hai consigliato e possono ottenere!. risparmiando, riuscendo, aggiustando, con il fai da te: con le nostre mani dà molte soddisfazioni gratificazioni!. Io sono dell'Italia centrale🇮🇹 sul Mar Adriatico Buon lavoro idee, ai prossimi video Buone Sante Festività!.

Cleaning iron based tools with Aluminum foil would cause more corrosion due to galvanic corrosion effect on the Residual aluminum. Unless you can ensure it either covers whole surface OR no residue is left. I get that these are quick fixes for when you can't go to the store but having a piece of sand paper at home is a must. If needed use wet sand, but make sure everything is dry and properly lubed. Also make sure the sand is course enough not to get stuck in hinges.

A fan!!! USA, HAWAII!!! Db

I'm from Vietnam 😊

I like that LED light cheat❤❤

Hello!! thanks!! From Seville, Spain

I'm from Elyria oh. Very interesting skills

Thank you very much

素晴らしいアイデアです👏👏👏👏👏

Good tips👍 Greetings from Venice Italy

Ik kom uit Nederland en kijk graag je filmpjes.

Thank you much solutions

A simple blob of solder across the LED terminals is so much easier and permanent.

These are good ideas,

Way cool stuff!! Thanks!

Xalapa Ver. México, tu canal es muy bueno. Gracias por compartir tantos tips. Feliz año nuevo.

❤sizin bilgilerden çok yararlanıyorum bazı bilgilerden bende çkk büyük fikirler çoğalıyor umut ediyorumki bu bilgi çeşitliluğinden daha fazla atılımlar göstereceğim başarılarınız daim olsun eğitimsisteminiz güzeliklerle dolsun saygılarımla

Thanks! Brazil!

Thanks for the tip

Hello from Switzerland greetings😊

These comments gotta be bots. Gotta be. Bots or a farm. Cause ain’t no way this many people are impressed by this. The IQ required to be astounded and amazed by these “hacks” requires a helmet and full time supervision.

çok güzel videoların var. Teşekkür ederim.

Desde España. Muy buenos trucos. Muy útiles. 😊

Australia. Hello to you...

Those ideas with aluminum are not bad

Your follower from Iraq

İ am from TURKEY

great video!

Bonjour de France, et merci!

3:14 the failed LED already had a dot on it. 😁

Helal olsun delikanlı çok iyi fikirler 😮😊

I, Was actually Wondering IF the Inner Mechanics of the Light would be a resister? But... If the Thought of Ohms of resistance is there. Maybe Forget that Idea.💡 Does look cool Though.

Len from New Jersey USA

5:40 Battery put in with reversed polarity but still works, ha 🤣🤣

Im afgan its very good

Japan😊❤❤❤

I from Iran❤

From Greece