I really enjoyed the no BS, this is what it takes to make a QUICK video!

Let's see what I can think of.... YES! I did spend more time messing with the cameras than the actual welding job. Roughly 75% of this job was spent changing angles and lenses. I didn't charge the customer for it. The actual job takes roughly 10-12 minutes. Why does the weld look dirty? Look carefully at all the sparks and junk flying out of the weld. You can see little smoke trails when I'm welding in different positions. This is indicative of cheap parts. This welded like a cheap part and a lot of junk floated to the top. Why does the weld look grainy? 4043 filler is pretty famous for looking grainy when it gets too hot. I used 1/16" diameter filler which I had to feed and push into the bead. The extra time spent feeding in lots of filler means it got hotter. I should have stepped up to 3/32" filler. In the end, it wont matter if the bead is a little hot. Why use a drill bit and not a ___________? Because I'm lazy and the drill was already there and its the perfect size to keep the sensor bung in alignment. What happened at 7:50? It was a terrible looking arc shot. I left some of it in the video just to show you its pretty bad. Can we get Viper content? Maybe.... What do you want to see? I've had it for 2 years and I can't think of anything to show until I start building it. What happened to the minitruck build? I still have it... Just no time to work on it. I own 3 businesses and they don't run themselves (yet). Side note - I've answered this question several thousand times. I didn't see any prep of the part. I know. Some of it wasn't shot, and the other part was edited out because I can't advertise what I usually use to prep parts with since its really dangerous stuff. Just pretend I used acetone like everyone else. Prep was done. Will there be a Primeweld 325x Review? Yes. I'm working on the video now. It's a great unit, and I recommend it if you don't want to wait for the video. Buy it at Weld Metals Online if you want to support TFS. What else? I'm sure I'm forgetting something.....

I love that even though it’s a “lazy Friday” video, the quality of the most important parts (like the welding and explaining) did not lose quality. I also agree with everyone else, it’s nice to see the behind the scenes of a KZfaq video. Keep it up!

I love this "lazy" style of video, feel like it brings us into the shop with you, the conversation style commentary

Short, long, edited, not edited... your videos are always worth watching!

$100/hr welding service. YT video..priceless, thanks for the education.

Hi, Justin! I very much enjoyed this video. Not only does it have good content in terms of welding and making money at it, it also shows us what it takes behind the camera. Thank you for making this kind of video.

Smh gotta love reading some of these comments telling what you did or should do. Lol. To those ppl. Maybe watch some of his videos. The man knows what he’s doing and you may learn something

You said that it's a crappy production job but I don't see anything wrong with it. It's real life. Keep them coming.

Late on a Friday....well thanks for taking the time to share that!

Dude, I appreciate the real life layout‼️🤓💙

I enjoy the realtime vid! Low quality is the new high quality!

Loving the 'lazy Friday' vibe 😆

I liked this better. reminds me of the original videos when I first started watching.

Raw and pure. True reality.

Good job son. Attending your school is on my retirement, less than 1 yr, bucket list. Great presentation skills, Thank You.

Thanks for your Rawness,,, Remindes me of the time when It was just you and me in the shop. No cameras just having fun...

Love the way this video turned out! Showing not just the stuff you have to do to make a video, but adjusting your settings mid-project (and why,) repostioning to keep the welds in good shape, and how OFTEN you have to stop just to move this or tweak that. A real shop video!

Awesome. Don't comment unless its far worth it. May have been messy but it was "real". Thanks for the fun.

Love it. Simple no nonsense "get out there, and get stuff done" video. Making a YT video, and fixing a part in less than an hour. I think you more than earned that beer.

Thanks Justin. After seeing how much effort it takes to get a good arc shot, I have a much greater appreciation for all the work you put into your videos that have helped me as a hobbyist. This video was great. Friday afternoons...

Happy days Justin, love the format, hope you had a beautiful weekend brother

I liked lazy Friday. I enjoy the more realistic approach versus a perfectly edited video. I don't come to KZfaq for TV production.

It was pretty neat to see what the torch is doing and filler…it was almost slo motion! Pretty good

Keeping it real. Love it. Thanks Justin.

Beautiful.

you placed your lens facing up ,then carried on , my lens would have been trashed. good vid . ill keep watching and sharing

Thanks, Justin. I always enjoy your videos, regardless of how prepared they might be. I learn so much just from watching you planning the job, prepping the parts, and then the welding.

I really enjoy your content. Thank you.

This should be a more common format. Straight to the point, no fluff. Cheers! 🍻

I did enjoy the episode. Thanks.

Good video showing how simple jobs can turn a profit if you are skilled enough to do them well. You make it look easier than it would be for me for sure. End product was perfect.

Awesome content as always

Keep being awesome

I agree with everyone. It is really cool to see what goes on to make the video!👍👍

nice work!

Miss the videos. Thanks for this one!

I kinda liked the "lazy" production. Kinda felt like I was there on the job sight and I was taking in every little thing you did to maybe improve my own work

I love this video.

You do great work! Please keep it up!

Thanks Justin

I can see your arc better than I can see my own when I'm welding. 😅 EDIT: Also, I don't mind the production at all. It's just good to see some content. 👍

True KZfaq loves Bud Light 🤣🤣🤙‼️. But honestly learning a lot just from your videos 🤙!

Thanks for not only showing us a quick welding job, but the equipment and cost to putting on a KZfaq video. Love your videos keep up the good work! This beer is too you!

Would be cool if you could do one of these welds where you voice or just show what your foot is doing in the pedal as you weld. Just so we can get a feel for how much adjusting of the power is needed as the metals heat up. Food for thought.

You’re so real!! Like the improvisation! It’s why I follow you! Keep it up!

Any video is a great video thank you for sharing.

Cool video Justin, simple, basic, and still educating.

We need to make this the most popular video he has

I loved this Ad Hoc video...great job!

Good video 😊

I love it! Keeping it real

Happy Friday,man that's cool, cheers.

This was a great straight up video. 👍

I LOVE these down and dirty quick videos like this!! I'm still a bit mad that now I have extra money for the classes, I don't have the extra for hotel and my sister just moved out of Las Vegas months ago!!

These quick little fun videos are probably my favorite next to the in-depth educational ones

makes those who dont know appreciate what goes into making a simple video , thanks for mentioning the price of the job too.

So salty somebody might think you served 😂. Vic Tacita

Got me thinking of 'Drunken Master'. Love it.

Simple is good, thank you😀🇺🇸

its thursday and im havin one

i love this type of video honestly it feels more like im watching my buddy weld and i kinda love it

Raw video, I liked it

This was a great video. One of your best arc shots too.

Happy Friday Justin! I tend to like the no-frills low budget/effort videos as they just seem more real to me versus something that has been extensively produced, edited and polished. Thank you for putting the "real" back into reality. And thanks for sharing with us.

Great watching doing a live job 👍🏽

For the quick videos like this I like them raw. Nice video

Badass viper Justin

Bro! Best video. Keep them coming like that!!! Can't wait to meet you someday!

I like the "real" video no editing.

Haven't seen one of your videos in a min.Another great video you make it look simple👍

I didn't mind this style at all, especially since you still had good shots of what you were doing.

You make it look easy. :)

your absolutely amazing

You could of had a beer off camera! I would have.

hope you're doing alright Justin, you seem like the previous weeks have been stressful. Don't overwork yourself, burnouts aren't great

Hope you got your beer afterwards

Nice viper

yea, please more Honda Content!!!

Cool vid, can you make more please. Thank you

Love this stuff :)

I loved this video! Most interesting, very jealous of that camera, what a pain it must be to make these videos. Love that welding table and that car!

A few minutes to beer funds.. 👍

Best video on KZfaq! :p

Some may think a lazy video but i have to agree with you a little behind the scenes people do not understand how much longer a simple job can take while trying trying record the process not to mention tring to make sure everything is visible! It's beer time

As a content creator, this video was cathartic as fk. 😂

Buenas tardes ...excelente video ...tengo tantas preguntas para hacer... saludos desde Argentina...

You deserve that beer. 🙂

I enjoyed the fun lazy editing. Whats quick and easy for you to make the radness happen, is still dope to watch dude.

Everyone wants the deluxe gourmet burger, no one appreciates the efforts it took to make it possible. Thank you for the reality check

Sometimes quick and dirty makes a great video no complaints here my friend!

I had a severe case of the friday-fuck-its also. Craved a beer or three also. It must be contagious...

I have the same pink Defiant Metal gloves, but mine are a medium size.

"KZfaq doesn't like beer" - The viewers sure do though

Hi, avoiding the "excessive" editing actually delivers a better training video experience, also a bit of an insight into how much effort there is to making video clips before the editing process even starts. I have a question as a beginner (i use lift TIG) does your high frequency start operate off the foot pedal? I could not see a start switch on the torch. bye

LoL!! Beers, er...Cheers!

Next beer is on me. Love your content!

Definitely your best video. Go have a beer!

Haha does sound like you did have a holy sh*t friday thanks for posting

Have a beer for me