Super Simple Brake Line Tuck!
Рет қаралды 199,156
Күн бұрынOnline Store: www.OffBeatGarage.com
Instagram: offbeat_garage
Facebook: / obgarage
Snapchat: offbeatgarage
Today we showed how to do a super easy brake line and clutch line tuck on an S13. This method is applicable to a lot of different cars that have the brake lines or clutch lines running along the firewall. Such as S14's, S15's, Miata's, Skylines etc.
Link to Products:
Tesa Tape:
amzn.to/2oBfuyV
Split Loom:
amzn.to/2n9wrjU
whatmonstersdo.com/
Use coupon code "LEDRIFT" to save 15% off the order!
OffBeat Intro and Outro Song by Yoshi Goliat
/ yoshigoliat
Background Music:
Catch a Way - Everet Almond
@ThexGreatxLTS 7 жыл бұрын
Almost makes sense to just bend new lines to the right spot and length.
@alwyzDTF 2 жыл бұрын
...Almost
@ThexGreatxLTS 2 жыл бұрын
@@alwyzDTF Just about!
@vallevaan 7 жыл бұрын
you just went full haggard, never go full haggard.
@AGOR2 2 жыл бұрын
Its a redhead…they like to overact
@peopleschampgarage7869 7 жыл бұрын
This is some haggard garage shit. Why not bend new lines how you want them. It's so easy with the correct tools. This is ghetto and unsafe.
@Ibangedyourmum 6 жыл бұрын
habeeb jewlongdongski i was thinking the same things it’s not hard at all to do some new custom lines
@luisc5214 5 жыл бұрын
Agreed. Its not pocket emptying to go and buy some lines and take a lil more time to bend and curve safe and flow friendly lines. But for what its worth its a good video to learn off of.
@jimstone4496 7 жыл бұрын
never have the brake lines contacting never. ugh. also the cringe factor from these possibly getting kinked to shot. my god.
@OffBeatGarage 7 жыл бұрын
+Jim Stone Ahh so you've done this mutliple times and had them kink and had negative effects from brake lines touching right? Or are you just stating hypothetical stuff?
@Hypn0tyz3d 7 жыл бұрын
I guess we will soon know lol
@jimstone4496 7 жыл бұрын
ahh so youve only done this for a youtube video? yes handbending like this can kink lines. i have had it happen. Brake lines contacting eachother can cause premature wear due to vibration. and yes that has also happened :) and i have probably done more brake lines than you and your buddy who "does this all the time" not really a great video to be showing around. kinkin the brake lines and not noticing is a shit show. i am however a fan of your regular content.
@jimstone4496 7 жыл бұрын
Spending the time with new line and doing it all properly also does yield a much better result.
@DjStanceZ 7 жыл бұрын
It does look better imo but I'd would've been more comfortable with going straight up braided lines easier fittment cleaner and better performance. But this is why it's your build man thanks for the vids.
@SharkeyGEE 7 жыл бұрын
That was horrible to watch! Don't want to go into why that's a dumb idea! But look at the bend over the master cylinder that looks even worse!
@extremeheadbanging 7 жыл бұрын
I'm with the people who aren't liking this. All the time and effort that's gone into this car, why not just bend new lines properly?
@kitchosgarage 7 жыл бұрын
Why not just bend new lines and have them run neat and not be touching?
@AlexA-bx8jr 7 жыл бұрын
this is terrible. you've put way too much effort into this build to go and not bend new lines for it.
@acuralee 6 жыл бұрын
honestly I don't think he knew what his buddy was going to do lol, the comment he made about it "being aggressive" was the nice way of saying "wtf just happened?" Maybe not... but he sounded shocked and I was too... dudes all calm and next thing you know he goes all ape sh*t on the brake lines... lol
@paxgermania4506 5 жыл бұрын
When you say tucked brake line's usually means running along inside the vehicle not cramped and knuckled in a bundle and stuffed up under something Lmfao. Holy fuck I'd hate to do a line repair on that plate of spaghetti lol
@ggmmiillff 7 жыл бұрын
Shit like this makes me wonder why 240s still hold any value
@OskarasNauseda 7 жыл бұрын
drift tax
@a240life2 7 жыл бұрын
I have been laughing all the way to the bank. I watch everyone else DESTROY their 240's. ROFL
@Hypn0tyz3d 7 жыл бұрын
This is the reason why I can't find a stock one on craigslist for under 5k x_x more rare than a Ferrari
@a240life2 7 жыл бұрын
I paid 750 on CL for mine in 2010. The phone rang 35 times whilst signing the papers. She was listed for about three hours total. Keep diggin' ;D
@Dizzykitty817 5 жыл бұрын
rice tax
@warmowed 7 жыл бұрын
Make new lines! Use a pair of brake bending pliers and do it properly. Also If you're bending new lines you may as well upgrade/replace your fuel lines while you're at it, since your going to be making more power at some point anyways. Everything else on your car is super well done it's silly to half ass this one thing.
@Stoneheadification 7 жыл бұрын
Wasn't this supposed to be uploaded on April the first, not one week later dude?
@DreadfulGarage 7 жыл бұрын
Brake lines are pretty resilient. When Shaved my bay I made all new lines, But ran out of line a few inches short on my last one. Not being able to go to the store and get more, I just took the factory brake line for the one that i was working on, bent all the bends out so it was straight, and then re-bent it to the shape i needed. Yours will be fine lol
@bbob5050 7 жыл бұрын
Can't this damage the lines?
@MustangManV8 7 жыл бұрын
Wont the lines rub now with vibration? I used to work on airplanes and we made sure no brake lines ever touched because of this very issue.
@nikita240s13 7 жыл бұрын
Hence the thick braided wrap. All the OEM clips holding them in place are usually broken after 25 years anyway, so you're better off doing this.
@MustangManV8 7 жыл бұрын
I was discussing having all the lines together inside the wrap. They will vibrate inside there and rub, especially doing motorsports. I have seen some crazy stuff happen from lines being to close and vibrating holes into the line.
@nikita240s13 7 жыл бұрын
I'll take that into consideration. I've had mine done like that for 2 years, but I'll pull the wrap off and inspect. I reckon I could just individually wrap each line in electrical tape to prevent this.
@MustangManV8 7 жыл бұрын
Sounds good man. Any lines that sat to close together we had to wrap the line in what we called Chaffing tape and we took that very seriously.
@abymondesir23 7 жыл бұрын
Nikita Rushmanov tru but out of the factory their still spaced together
@kylebanta1903 7 жыл бұрын
Such a nice car then you go and do something like this.
@brummiescot 7 жыл бұрын
should have just made new lines that fitted properly rather than bodging the existing
@windsorcastl 7 жыл бұрын
now look at that, before it was clean and now it looks janky as fu. Just that one cockeyed line going over the break booster is enough to ruin it
@clayestes4640 7 жыл бұрын
1.5 million dollar brake like tuck right there boys.
@OffBeatGarage 7 жыл бұрын
Hahaha
@Grzesiupiesiu 7 жыл бұрын
this video should have disclaimer "if you copy this we are not responsible for your damage"
@PicaNoPicaFishing 7 жыл бұрын
bro i have watched all your content from the start and nvr have i seen a garbage video till now. thats not even tucked its more like less noticeable all he did was bend the shit out of them and put a rubber gromet smh. i miss your dope af instrutional video.
@brianspiess1420 7 жыл бұрын
How come u didn't just do a braided brake line kit n brake booster delete?
@lucasdamask 7 жыл бұрын
When you kink the lines you are changing the diameter of the brake lines, it can result in brake problems, any car mechanic just cringed when he twisted the lines like that. just put a meter in the brake caliper bleed valve and check if you have equal pressure in each axel, and other shit you can do to see if you Fuckd up something.
@HowlerBikeVlogs 7 жыл бұрын
it's a drift car... brakes are optional dude.
@lucasdamask 7 жыл бұрын
Sure, until they are the only shit that can keep you from kissing that wall at 100 plus.
@HowlerBikeVlogs 7 жыл бұрын
with that camber in the front the brakes arent that effective anyway, so a little kink here or there is gonna be fine. you're worrying about race-car performance in a play-for-fun-car
@lucasdamask 7 жыл бұрын
dude, no problem, but i always liked to run in car with good brakes and good tires first of all, and i just think it is a shame to do a build so nice and end up halfassing in such a simple thing, but anyways, just an opnion.
@HowlerBikeVlogs 7 жыл бұрын
good, this is the kind of reaction i was hoping for, instead of starting a match in namecalling. it's true that if you're gonna do a build legit you shouldn't do this but it's his car so it's whatever. i just liked to see how he does it, gets me thinking for my own custom work in that area.
@sweetlowfatjesus9663 5 жыл бұрын
Bahahahahahahahaha, wow!...I clicked on the video thinking you were gonna show how to properly cut bend and install new lines or build some sort of cover to hide them...I was waaaaayyy off lmao...
@steventhomson7531 7 жыл бұрын
Looks good, but having the brake lines contacting each other is a big no no. They will vibrate together while driving and could wear holes into them. Why do you think brake lines are always clipped in plastic clips to hold them in place? It's all to prevent them rubbing on anything that could damage them.
@BIGGELATO 2 жыл бұрын
Budget + save time = this. Same as "do you want it right or right now?" If you don't have the extra time and/or budget, do whatever works. IDK why people freak out about this. Normally, videos like this get tons of likes and barely dislikes. It's a great DIY video
@NomadicWubze 7 жыл бұрын
Looks worse than stock. My opinion. Braided brake lines do the same task easier and safer. There cheap
@FunWithSmexy 7 жыл бұрын
why not chase bays brake lines?
@booogs 7 жыл бұрын
with all the effort and quality slowly going into this build you would think the tuck would be done properly with making all new lines rather than aggressively shoving/bending/kinking them. why risk having the brakes fail from vibration? "tits huh?"...."mmhm" says it all right there lmao
@shane7070 6 жыл бұрын
Hey man, I've watched your previous videos and have a lot of respect for the work you've done. I'd love to see a video of you taking this out and showing us how to bend new lines :)
@shane7070 6 жыл бұрын
Wow, I should have read the date before commenting. I wonder if the lines ever get changed?...
@kevion4621 6 жыл бұрын
This doesnt affect the flow ?
@Iain240 7 жыл бұрын
This is not up to your usual well thought out standard. As others have said brake lines should not be allowed to rub against one another but also you shouldn't put zip ties on brake lines as the toughness of the nylon means they will also wear through the metal eventually.
@yuhbwa9698 6 жыл бұрын
Think it looks a little silly with the clutch line noticeably bent from its original position and angling overt the brake booster but a stainless braided clutch line such as the one ive got would resolve that. (maybe)
@kimokahikolekalihi 7 жыл бұрын
Seems like you've gone to great lengths with this car. Why not bend new lines and run them where you have them or through the wiper arms channel? super easy to link your lines that way or introduce a leak or a weak point ready to fail down the road.
@themailman1681 5 жыл бұрын
Old vid but what color is that specifically
@Ricy013 7 жыл бұрын
nothing like the normal perfection you do
@Kevvedajsel 7 жыл бұрын
How I've missed this car! Will there be build videos on it this year or driving videos?
@spencersullivan7092 7 жыл бұрын
Dieseltrallan literally every one of his build videos is this car.
@ratgreen 7 жыл бұрын
follow his snapchat, hes always posting small updates on there, way before youtube
@Kevvedajsel 7 жыл бұрын
Spencer Sullivan literally don't see your point. Never did I say it wasn't. What I was saying was that there hasn't been a video on it since 10th of december.
@Kevvedajsel 7 жыл бұрын
ratgreen I know. I've been following his yt and sc since he had the first Le Drift Car.
@kingchevy8885 6 жыл бұрын
I ran all new lines and used the open space with the 3 holes u guys where u guys tucked under the lip.... u see maybe a inch of my lines and that's it
@SHRYK3X 7 жыл бұрын
Why would you move the brakelines closer to the engine though? in the old position they would have stayed cooler and out of the way.
@Eadss 6 жыл бұрын
why did you put masking tape b ?
@Ricqu 6 жыл бұрын
Hope you still reading comments from old videos, what color is this car? Bout to paint my e36 purple, so was just wondering.
@OffBeatGarage 6 жыл бұрын
Firemist Purple available from TCP Global
@Blaqs1 7 жыл бұрын
Fuck that, that shit was aggressive as fuck lol
@mattchip8926 7 жыл бұрын
Why not just spend the money on new lines and do it properly instead of bending the fuck out of the lines?
@OffBeatGarage 7 жыл бұрын
You bend lines either way lol
@Grzesiupiesiu 7 жыл бұрын
OffBeat Garage bend using correct method and just bending are 2 different things
@abymondesir23 7 жыл бұрын
Grzegorz Gosciniak well said
@kriswyche 4 жыл бұрын
I was taught never to bend line by hand. We used a brake line forming tool. Average psi in the lines ranges from 1000-1500 psi so even the smallest kink can be bad. Did you guys ever encounter any problems ?
@DrifterDavid 4 жыл бұрын
Much easier way to tuck lines for a 240 build is just to convert to all stainless lines from the master all the way down to the calipers. Ive been doing it for years and it's way easier to work with, and looks so much nicer without having to worry about if your brakes will work again after you do this. Not sure if they still do but a guy used to offer a full kit on ebay about 8 years ago.
@beerusthefuckinggod5429 5 жыл бұрын
Holy moly, and people talk shit about Honda engineering. These 240 guys are a new breed lmao
@Wrenchlife604 7 жыл бұрын
Looks oem clean with the engine in there
@NoClueGames101 7 жыл бұрын
Am I the only one who finds this just dumb
@spartanguy94 7 жыл бұрын
No Clue dude im dying lol
@Elipro427 5 жыл бұрын
If you think its dumb then why did you watch it?
@coreysteilkie7317 6 жыл бұрын
Best way is the buy new straight line, bend it how you want and space them so they don't rub. If your gonna do it, do it right the first time. Could have bent them and then spaced them with plug wire spacers and maybe a little rubber line.
@FernandoHernandez-jc2mu 6 жыл бұрын
Corey Steilkie Thank you
@akmalps9999 7 жыл бұрын
Dat bending tho. Wouldn't doing that have a risk of shutting the line?
@OffBeatGarage 7 жыл бұрын
+Akmal Manan Not when being careful and not making sharp bends. To cause it to shut you'd have to do a pretty tight bend haha
@AX-xi2pw 7 жыл бұрын
I suppose it wouldn't be a problem if there is fluid in the lines.
@Blaqs1 7 жыл бұрын
OffBeat Garage uhm.. That was anything, but careful.. Lmao
@nikita240s13 7 жыл бұрын
It's pretty impossible to bend the line with a radius tight enough to kink when you're bending with you hands.
@OskarasNauseda 7 жыл бұрын
why 240s still hold any value drift tax
@okie7591 7 жыл бұрын
I have a question, do brake lines have to be solid pipes or can I use like a strong tube/piping for brake lines. Would the brakes still work the same or are solid pipes necessary? Thanks
@frogchaser 7 жыл бұрын
the lines need to be solid so the pressure can stay consistent.
@aeast88 7 жыл бұрын
OttGarage stainless steel AN line or steel brake line only.
@fagouma 7 жыл бұрын
Watch Bad Obsession Motorsport's ep15. They used aluminium hard lines for fuel. Maybe you can use the same for brake lines. I am not a mechanic though.
@vallevaan 7 жыл бұрын
if you watch exatly the same video few minutes further you can see that they did you a hose for the brake lines and not solid tubes.
@booogs 7 жыл бұрын
no. fuel lines only need low pressure. brake lines are much higher.
@thenoid5131 4 жыл бұрын
Guys I’m looking for a good reputable mechanic around the LBC area for my S14 needs some things done I can’t do it anymore got really bad back any one knows anybody pls let me know
@zero7288 4 жыл бұрын
What purple color code pls?????
@abadibi 7 жыл бұрын
next time you swap a JZ in there right?
@zami705 7 жыл бұрын
Aba Dibi KA is life
@Giugno01 7 жыл бұрын
What's is the purpose of doing this? Does this improve anything on the car ?
@elliot438bcfcVTEC 7 жыл бұрын
Show car
@retrotellephone 7 жыл бұрын
"show car" *Grabs break lines and mangles the shit out of them*
@elliot438bcfcVTEC 7 жыл бұрын
I was kind of joking, I hate show based cars. To me function = form
@emperaza 7 жыл бұрын
not your best work....
@Renzo_Stylez 7 жыл бұрын
cool bro going to do this tonight
@siliquaesid703 6 жыл бұрын
What a BODGE JOB!! Why not bend the lines so they run under there in the first place instead of butchering those nice tide bends you had to start with?
@paxgermania4506 5 жыл бұрын
Some people's definition of tucked varies greatly I guess lmao
@ksb_03 7 жыл бұрын
Dammit I love that purple colour
@ej8_felipe651 5 жыл бұрын
It looks really nasty around the mc and booster. If you get a leak it will be a mess to fix and clean
@krismcleod272 4 жыл бұрын
Brutal
@therealr0bert 3 жыл бұрын
Hey there racer boy, I got a brake line in my firewall, all you gotta do is reach in and grab it!
@PapasBelt 7 жыл бұрын
Dope, wish there was a lip like that on e30s
@mikemedeiros5458 7 жыл бұрын
I guess thats an easy, although sketchy, way of doing it without just re routing new brake lines
@Uglier. 7 жыл бұрын
Do you have the whole car build filmed already and u just edit and upload the videos whenever? Im so confused, because I looked back at ur old videos and u already had them tucked and tubed. ?????? LOVE YOUR VIDEOS BTW! MORE MORE MORE
@OffBeatGarage 7 жыл бұрын
Yeah. So what happened was the car needed to be rushed a lot of the times to be done for certain events. Which meant spending almost every single hour of free time building the car and just recording footage. Leaving me with no time to edit the footage. So now the car is done and there's just a stack of footage from tons and tons of weeks of work that has now piled up. Slowly but surely going through the footage and putting out videos to bridge the gaps in the build. Thanks :)
@Uglier. 7 жыл бұрын
Oooooohhh makes sense. No rush tho, keep up the high quality good work!
@matthewd3970 4 жыл бұрын
One thing my dad taught me is to never fuck with trying to bend brake lines. These have the chance of failing on the highway. lol
@ratanante 7 жыл бұрын
simple but dangerous...just bend new lines!
@slingshotgarage405 7 жыл бұрын
This reminds me of that one girl with the Honda (bubble gum car) who said she did a engine tuck, brake tuck, bubble shift knob lol
@chrisjay555 2 жыл бұрын
Simple....yes simple minded. One thing you don't badly F with on any vehicle is the brakes. Especially on a vehicle you'll be driving fast & putting it through its paces.
@ImportJunkyz 7 жыл бұрын
Jeesus, wtf did I just watch 😂
@stever1412 7 жыл бұрын
This was pretty hack dude. Not your usual quality projects
@Tehknologix 3 жыл бұрын
isn't your brake fluid going to get heat soak from cyl 4 now? Lines are soft as fuck, I wonder what that heat will do to them under heavy breaking. Probably only a issue with a daily car in a hot state.
@yomomasface 7 жыл бұрын
Touching brake lines will gradually be cannabilized.
@akseliluotonen194 7 жыл бұрын
can u start new project
@justintalictic2357 7 жыл бұрын
Looked better in it's original factory spot
@makemespin 7 жыл бұрын
I quite like the look of hardlines so this really isnt for me, but its a cool idea none the less.
@karlamerika6755 7 жыл бұрын
ya those are going to vibrate and rub holes in each other as u drive. not safe
@kevincampos68 7 жыл бұрын
post more often man
@roryc6390 6 жыл бұрын
Yeeehaaa
@johnthor4999 5 жыл бұрын
I would like to thank the comment section for their knowledge of does and don'ts. Lol
@phatnissan95 6 жыл бұрын
Glad I wasn't the only one that saw this and thought "why?!" Or "are you flippin serious?!"
@MrAhhsum 5 жыл бұрын
20 bucks worth of material and a loaner tool.. That's what you need to do that right. I applaud the video, and we all learn something every day...
@TEAMUMAMI 7 жыл бұрын
keep up the videos! Hopefully the lines are bent too much
@patricklawrence9784 6 жыл бұрын
Probably read the "Brake Line Tucking for Dummies" LOL
@Willy4k 7 жыл бұрын
Cleaner than my mothers criminal record.
@mercer982 7 жыл бұрын
i'm speechless
@Mikejszy 7 жыл бұрын
There's a reason why they come separate from factory. Don't do this people
@AGOR2 2 жыл бұрын
And there goes that guy without brakes
@Corphish_ 7 жыл бұрын
Sorry man that's no good
@richardtheart1584 5 жыл бұрын
So you bend your brake lines ? And you did not realise that it was made of metel so its gone vibrat against it self and take of the protective lining and rust .smart
@luuklugtigheid1867 7 жыл бұрын
you know what satisfies me, TJ Hunt can't drift for days but has a sick livery. But you are a great drifter, and you don't have a nice livery. You should get one
@carolakieboom9978 7 жыл бұрын
Luuk Lugtigheid Why would you want to compare 2 people who are at a very different level of experience with eachother. TJ just started and he sure as hell making a lot of progress
@commuterdude3053 5 жыл бұрын
Clean and simple. Yeah . vent ass lines with kinks that are ductaped and ziptied.. The tape is going to melt
@MyPandaRawrs 7 жыл бұрын
yaaaaaaaaaaaaaaas daddy!
@jesseiwamoto6612 3 жыл бұрын
how is covering the lines a "tuck" 🤣. tucked goes behind firewall
@slime5430 7 жыл бұрын
1.5 million dollar brake line tuck
@Vanabond 5 жыл бұрын
Haven’t watched your videos in a long time, since you were learning how to drift. I was excited to check this out, but dude...... you trying to hurt yourself?
@gurbeerathwal9406 7 жыл бұрын
Should of put the clutch line under the booster.
@iamawatermelon9299 7 жыл бұрын
that looks trash
@nickferraina9860 6 жыл бұрын
Should made your own instead of kinking the factory ones. Specially since your OCD with the cage
SmashCrush! Arabic
Рет қаралды 39 МЛН
OffBeat Garage
Рет қаралды 199 М.
AutoRegionBA
Рет қаралды 2,8 МЛН
Ivan Ivanov
Рет қаралды 6 МЛН