Superduty Door Panel Swap

Рет қаралды 51,617

5 жыл бұрын

Follow along as I swap out my door panels in my Ford F250. I have a 2000 and I replaced my door panels with a set from a 2012 superduty. I go through the details of how I modified my stock door to get the new door panel to fit properly and with good alignment. I go through the wiring but not the "how to wire" There are simply to many combinations. If you have 2000-02 truck and are switching to 2012-13 I have the schematics and pinouts for those years. You can buy them from ebay if needed or I'm sure if you would like to buy me a beer I could get you what you need.

Пікірлер: 150

@visetchansamone9131 5 жыл бұрын

Thanks again Anthony for the videos and all your help! New door panels installed and all wirings complete and all switches work.

@shooshinejonnie 5 жыл бұрын

Fantastic! 👍👍👍 Thanks for reaching out and supporting the channel.

@scottmorse7762 4 жыл бұрын

I bought the same door panels last week, just waiting for them to arrive. I just came across your video and wanted to say thank you very much for doing the hard work for me and everyone else. Much appreciated 👍

@shooshinejonnie 4 жыл бұрын

Thank you Scott. If you need the wiring diagrams shoot me an email. shooshinejonnie@gmail.com.

@EleazerMills 4 жыл бұрын

@@shooshinejonnie can you send to Eleazer.mills@gmail.com

@shooshinejonnie 4 жыл бұрын

@@EleazerMills shoot me an email at shooshinejonnie@gmail.com and let me know what years you are swapping. I'll share what I have.

@EleazerMills 4 жыл бұрын

@@shooshinejonnie thanks

@SinfulCastillo 5 жыл бұрын

Great video, now I will definitely be doing an interior upgrade on my 07 6.0 l.

@shooshinejonnie 5 жыл бұрын

Be careful. It's addictive. 😁 Thank you for watching and commenting. Did you already see my other video on the seat swap? kzfaq.info/get/bejne/n8Wjl8WBstPOlYk.html

@LivingOnWheels 5 жыл бұрын

Nice work! I would love to see a video of the actual mounting of the seats and that center console! Looks like the fitment from the center console to dash isn't as bad as I would have thought.

@shooshinejonnie 5 жыл бұрын

Thank you. The seats mounted in the exact same spot as the old ones did. The console also mounted in the stock jump seat location. If you have a bench seat you may need to drill holes but the nuts should all be in the underside of the floor. If I remember correctly I went over this with my back seat going from bench to 60/40. Thanks again for watching. You can check my seat swap video here. kzfaq.info/get/bejne/n8Wjl8WBstPOlYk.html

@LivingOnWheels 5 жыл бұрын

@@shooshinejonnie Thanks for the explanation. I should have done a little more looking before I asked. I've been looking at putting one of those center consoles in with my factory chairs from my 2000 40/20/40 bench with the jump seat. I've heard some say it'd work some say it wouldn't. Do you think the mounting brackets would work with the older seat brackets? Thanks again for some nice informative videos.

@shooshinejonnie 5 жыл бұрын

@@LivingOnWheels I've asked in my group and someone said it can be done and has done it. Not sure on any modifications but I'm assuming it would be minimal. Now we all know what assuming can do. Hopefully this helps.

@RichardVarn 5 жыл бұрын

Well done video!

@shooshinejonnie 5 жыл бұрын

Thanks Richard for the kind words. It's something I strive for. Thanks for watching.

@lilnightsand7079 5 жыл бұрын

Great video !!!!!🔥🔥🔥🔥🔥

@shooshinejonnie 5 жыл бұрын

Thank you.

@dandolan3946 4 жыл бұрын

Just did my door panels (00 with 08 panels). One thing I recommend is to swap out the inner window gasket. The newer ones will let the door panel set down and fit tightly to the door.

@shooshinejonnie 4 жыл бұрын

That's a great tip. Thanks Dan for watching, commenting, and sharing knowledge.

@jordanakdogan6933 Жыл бұрын

You have a part number for those window gasket?

@lcj.d.m.9434 5 жыл бұрын

TENKS FOR THE VIDEO

@colinblankenship2401 5 жыл бұрын

Thanks for sharing.

@shooshinejonnie 5 жыл бұрын

My pleasure.

@dandolan3946 5 жыл бұрын

nice video. I have a 2000 that I am currently doing a dash swap (2008 dash) using McNasty Customz conversion kit. Ill eventually be installing some King Ranch seats in it as well.

@shooshinejonnie 5 жыл бұрын

Thank you.

@bricemassey8028 4 жыл бұрын

@@shooshinejonnie If you send me the pinout on the 2012 door panel (wireing diagram) I have a 01 I'm swapping to 2012 door panels. I'll buy you a 12 pack via PayPal

@shooshinejonnie 4 жыл бұрын

@@bricemassey8028 shoot me an email at shooshinejonnie@gmail.com and I'll get it to you.

@bricemassey8028 4 жыл бұрын

@@shooshinejonnie I tried that email it says it's invalid. If you could shoot me an email. bricemassey985@gmail.com

@bricemassey8028 4 жыл бұрын

@@shooshinejonnie Are you still interested I really need that pinout wireing diagram

@MadLadCustoms 5 жыл бұрын

Great video and result! We're the doors able to close and not interfere with dash?

@shooshinejonnie 5 жыл бұрын

Thank you Mychael. The doors close fine. It does rub slightly. I haven't noticed anything wearing yet but haven't really looked that closely.

@vegascolors 5 жыл бұрын

@ 17:25 after you clean or detail your truck, just spray the area with Silicone. It'll keep the abrasion to a minimum.

@shooshinejonnie 5 жыл бұрын

Good tip. I haven't noticed anything yet. Thanks for sharing, commenting and watching.

@Superiorpowerwash 4 жыл бұрын

Good video and good information. I have a 1996 Ford F250 but has manual locks and manual windows. I would like to have newer door panels that have pockets in the panels to hold things, no power windows or locks in this truck. How can I find out if I can put newer door panels on these old doors and if so, what years will work? Is there a reference book or site out there somewhere so I can get this information? Thank you.

@shooshinejonnie 4 жыл бұрын

Thanks for the kind words. As far as the OBS goes, I'm not aware of any simple swaps but I'm sure something has been done. I've heard of doing full interior swaps from superduty to OBS, but I don't know any details. I would check on the Facebook page "powerswap nation." It's mostly geared for 99-16, but you may be able to find more info there.

@motorcyclepimp 3 жыл бұрын

How did you install the center console? There are 3 brackets front (dash mount), middle bracket (goes to the floor of body), then the rear bracket (uses the studs coming up from floor of truck body). I just did this install, seats and console from 2013 into my 2005 6.0. Curious if you drilled the center bracket into your truck body floor. I will also be doing the dash upgrade but waiting on the swaphelper modules to be released before I do the swap. Looks good! Your installs are very familiar to me right now! lol. I used your seat wiring. Thanks!

@shooshinejonnie 3 жыл бұрын

Thanks for watching and commenting. On the center console, I didn't install the front or the middle brackets. I couldn't figure out how to mark them to drill them out. I haven't had any issues with it so far. One time I leaned heavily on the very back part and the front flipped up a bit, but it's never happened again. I do have a center console install and wiring video.

@6.blowpowerjoke791 5 жыл бұрын

I just did the swap, and finish the door panels, the dash and im working on the gauge cluster. Almost done with the gauge cluster and everything works flawlessly. If you need help i can give you my number to send you picture and walk you through what i did.

@shooshinejonnie 5 жыл бұрын

Thanks Gunnar. If in the future I decide to still do the dash swap I may take you up on your offer. Keep the pictures handy because if I do the swap it may be awhile.

@6.blowpowerjoke791 5 жыл бұрын

shooshinejonnie 👍 i can build the gauge cluster for you and walk you through the hvac box conversion when you decide to 🤘

@shooshinejonnie 5 жыл бұрын

@@6.blowpowerjoke791 👍👍

@alex695215 4 жыл бұрын

Can you make a video of the finished product?

@koltonburtard9921 4 жыл бұрын

Gunnar Easley I’m doing 2000 to 08 only problem I’m having is getting the lights in the door switch to come on is there a wire that I need to hook the led+ wire and led- wires too

@willmurphy3790 4 ай бұрын

What is that console out of?? I’ve never seen a flow through style console in any 08-16 SD…I’ve seen the expedition ones swapped in which look good, but that one looks really good…

@shooshinejonnie 4 ай бұрын

2012 f250.

@mrmotita510 4 жыл бұрын

damn great video. i want to do the same thing to my 04 excursion n=but was wondering about the wires matching. do you have any pin outs for the 04's?

@shooshinejonnie 4 жыл бұрын

Hey thanks for watching. I don't have the pinouts for an 04.

@mrmotita510 4 жыл бұрын

@@shooshinejonnie thanks boss.

@shooshinejonnie 4 жыл бұрын

@@mrmotita510 I have 02 which is completely different than my 00. Can send you those to see if it's close. Shoot me an email at shooshinejonnie@gmail.com.

@mylifeisdope916 3 жыл бұрын

are those factory mirrors? looked to see if you had a video on them but couldnt find it. ive got ford mirrors and was hoping to find a wiring video for them

@shooshinejonnie 3 жыл бұрын

They are factory style for 08-16. They are not oem. They are Dedc brand purchased on Amazon. www.amazon.com/dp/B00VT02ZEE/ref=cm_sw_r_cp_apa_fabc_GCEQCR48V22MPYA9YEFJ?_encoding=UTF8&psc=1 I wired them in with the help of this video: kzfaq.info/get/bejne/n5Z2itCmq83VZX0.html

@davidspurrier7605 4 жыл бұрын

hello all , great video my friend thank you for sharing it , i m in costa Rica 🇨🇷 and ready to do my door panels swap from an 06 f-250 to 2016 panels and i wanted to ask if your diagram will work for my 06 truck and if so will you be willing to share it with me than you in advance.

@shooshinejonnie 4 жыл бұрын

I have the diagrams for 2000-02 and 2012-13. I'd be happy to share them with you but I'm not sure they are going to help you much. Connect with me at shooshinejonnie@gmail.com.

@noelmartinez5417 Жыл бұрын

Do you have video on driving door wires

@shooshinejonnie Жыл бұрын

I don't. I have some wiring diagrams that I used that I will share if you send me an email at shooshinejonnie@gmail.com.

@dandolan3946 5 жыл бұрын

for the rear doors, did you use the newer door handle cups or the existing ones and trim them?

@shooshinejonnie 5 жыл бұрын

I used the newer style cups.

@SoCalCitizen 3 жыл бұрын

The you have a part number for door cups or year/model used when ordering? Ford has already sent me two different kinds and both were wrong (one protrude too much and the other was short in length).

@bobodine9299 5 жыл бұрын

Nice work it's good to see people like you have the passion to do these kind of upgrades my question I have a 2001 F350 I bought a set of 2013 door panel you think the wiring would be the same as a 2012

@shooshinejonnie 5 жыл бұрын

Thanks for the kind words Bo. The wiring would be real close. The good news is I have both of those schematics. Shoot me an email at shooshinejonnie@gmail.com and I'll share those with you.

@dandolan3946 4 жыл бұрын

Any pictures of the front end swap yet?

@shooshinejonnie 4 жыл бұрын

Nope. I never did the front end swap. I sold all my parts. Maybe I'll eventually get the newer front end (on a newer truck). 😁

@adamjohnson319 5 жыл бұрын

Where did you buy the whole kit from? My local junk yards never have any newer f250’s

@shooshinejonnie 5 жыл бұрын

I bought it from someone in one of the Facebook groups. I did have to drive about 7 hours one way to pick it up. Check out different Facebook groups such as Power Swap Nation. Check Craigslist. You can use searchtempest.com for Craigslist to search by regions or states to give you a broader search area in a short amount of time.

@jacobpiccolo2461 2 жыл бұрын

I’m converting 2012 Ford F-250 panels to my 1999 Ford F-250 I bought a light up volt tester I found window up and window down wire but I also found one wire constant and two wires with nothing. I’m might be in over my head not really sure. Any advise ?

@shooshinejonnie Жыл бұрын

Sorry Jacob. Did you find what you were looking for? shooshinejonnie@gmail.com

@BayaerialsProductions Жыл бұрын

A wiring diagram would be nice

@shooshinejonnie Жыл бұрын

Shoot me an email at shooshinejonnie@gmail.com and I'll share what I have.

@burrejo 4 жыл бұрын

There's kits for the dash. Definitely be a pain though

@shooshinejonnie 4 жыл бұрын

I'm thinking even with a kit it'll still be more than I want to deal with. It looks cool and all but at the end of the day for me it's not a good investment of time or money.

@resendizconstruction 5 жыл бұрын

im doing this swap to my 2001 f350 do you have the schematics for the rear doors?

@shooshinejonnie 5 жыл бұрын

I do. Shoot me an email at shooshinejonnie@gmail.com.

@Mr.LA562 3 жыл бұрын

You going to do the interior as well or front clip

@shooshinejonnie 3 жыл бұрын

As far as interior I have done seats, console, and carpet. I had all the rest of it as well, front clip, bed, dash, etc. I decided against doing all that and sold all of it.

@huntercollier518 2 жыл бұрын

Do you have a copy of the pinout you made?

@shooshinejonnie 2 жыл бұрын

I do Hunter. You can contact me at shooshinejonnie@gmail.com.

@willehlert2498 Жыл бұрын

so what do you like about the 2012 door panels? what would make me want to swap?

@shooshinejonnie Жыл бұрын

Functionality? Nothing. They are basically the same. They have the same function. It's mostly about the look or the continuation of the look for me since I had purchased them in a package deal.

@dandolan3946 5 жыл бұрын

Also, is that new carpet on the floor? Did you order it online?

@shooshinejonnie 5 жыл бұрын

It came with my package deal. I bought nearly a complete interior and it was included in that. It works fairly well. My original door sills aren't quite as wide as the newer ones so I have a few threads sticking out.

@jfubele 4 жыл бұрын

@@shooshinejonnie Where did you buy your package deal?

@shooshinejonnie 4 жыл бұрын

@@jfubele I found it through a Facebook group.

@666silva666 3 жыл бұрын

Where did you get your speaker kick panels.

@shooshinejonnie 3 жыл бұрын

They were in the truck when I bought the truck so I have no idea where they come from. I've never seen a brand name or anything on them.

@paulbasco3363 4 жыл бұрын

Did you put the newer seats in to

@shooshinejonnie 4 жыл бұрын

Paul, I did put 2012 seats into my 2000 superduty. You can find the video here. Thanks for watching. kzfaq.info/get/bejne/n8Wjl8WBstPOlYk.html

@strokenobs___181 2 жыл бұрын

Where did you find the pin outs for the 2012 switches

@shooshinejonnie 2 жыл бұрын

I purchased them. If you shoot me an email at shooshinejonnie@gmail.com I will send them to you.

@strokenobs___181 2 жыл бұрын

@@shooshinejonnie okay 👍🏻

@Adam-xc7jz 2 жыл бұрын

Can you send me the wiring diagram. I got a 99.5 and the door panels I got are from a 08

@shooshinejonnie 2 жыл бұрын

I have 2000-02 and 2012-13. The 2000 should be close and I'm not sure on the other. You can send an email to shooshinejonnie@gmail.com and I'll be happy to send those to you.

@bobstark4201 3 жыл бұрын

Where can I get those pin outs? Doing a swap from a 99 to ‘12. Cant seem to find the info I need without paying someone $50.

@shooshinejonnie 3 жыл бұрын

You can connect with me at shooshinejonnie@gmail.com.

@coreysclassicpaint 5 жыл бұрын

I hava1999 f350 but got the hold interior out a 2008 f150 will it work including the dash

@shooshinejonnie 5 жыл бұрын

I don't think so. Completely different cabs. You can fabricate or mashup seat brackets for seats. Seats are a few inches more narrow than superduty. The dash I can't see working. I'm sure with enough money and time you can make anything work but just because your can doesn't mean you should.

@chrisfarley9213 5 жыл бұрын

08 will work, check out mcnasty customs, sells a bracket and has a video on how to

@jerryknorr679 5 жыл бұрын

? Where do u find ur interior parts must newer parts are in insurance yards.

@shooshinejonnie 5 жыл бұрын

I found my parts from a guy that had gotten them for a swap and then decided to go a different route.

@leohernandez7.3powerstroke61 3 жыл бұрын

Where do I find those schematics

@shooshinejonnie 3 жыл бұрын

You can connect with me at shooshinejonnie@gmail.com.

@nickthronson1310 4 жыл бұрын

Any chance you still have your old door panels? Could a guy buy them from you? Tks

@shooshinejonnie 4 жыл бұрын

I do have the front panels. Connect with me at shooshinejonnie@gmail.com. I'm located in Western North Carolina.

@jasonmontgomery5973 4 жыл бұрын

I also have a grey set of door panels and seats out of a 2003 Super Duty, in excellent shape..... in Dallas TX.

@Mikeynuts21 5 жыл бұрын

What mirrors did you go with?

@shooshinejonnie 5 жыл бұрын

Mikeynuts21 I went with these in the link below. I did however swap out the amber lenses for smoked LEDs to match the rest of the truck. Overall they have been very good. No wavy or shaky glass. Nice and solid. Thanks for watching and commenting. DEDC Ford Towing Mirrors F250 Ford Tow Mirrors F350 F450 Pair For 1999-2007 Side Mirror Power Heated With Signal Light (Upgrade to 08 Superduty Retrofit) 1999 2000 2001 2002 2003 2004 2005 2006 2007 www.amazon.com/dp/B00VT02ZEE/ref=cm_sw_r_cp_apa_i_GhlcDbBNKR7QG

@Mikeynuts21 5 жыл бұрын

@@shooshinejonnie thanks buddy. Great video, thank you for sharing the knowledge.

@shooshinejonnie 5 жыл бұрын

@@Mikeynuts21 my pleasure.

@tommybrown7499 4 жыл бұрын

Can you send me the wiring fir the drivers door for a 2000 model

@shooshinejonnie 4 жыл бұрын

I received your email and sent them to you.

@tommybrown7499 4 жыл бұрын

@@shooshinejonnie thankyou for the information it was a great help

@shooshinejonnie 4 жыл бұрын

@@tommybrown7499 my pleasure. Happy to help.

@EleazerMills 4 жыл бұрын

Where is the link for the pin outs

@shooshinejonnie 4 жыл бұрын

You can shoot me an email shooshinejonnie@gmail.com and I'll share what I have. I have 2000-02 and 2012-13.

@ianbartram3568 3 ай бұрын

Just sent you an email. Would love your knowledge hooking up my 2012 door panels on my 2002 truck.

@SirBradfordII 3 жыл бұрын

Emailing you about wiring diagram.

@shooshinejonnie 3 жыл бұрын

Happy to share and help.

@haxthis 4 жыл бұрын

Hi there, would you mind sending the digram?

@shooshinejonnie 4 жыл бұрын

I can do that. Shoot me an email at shooshinejonnie@gmail.com. and let me know which years you're looking for.

@AlexHernandez-nv3mg 3 жыл бұрын

@@shooshinejonnie hello i have 07 f350 and a have to do the same condition with the 08 switch can you send me the diagram pls

@shooshinejonnie 3 жыл бұрын

@@AlexHernandez-nv3mg shoot me an email with what you're looking for. shooshinejonnie@gmail.com

@BrianBeKillinEm 5 жыл бұрын

Do you still have the diagram for the driver side controller ?

@shooshinejonnie 5 жыл бұрын

What year (s) are you looking for?

@BrianBeKillinEm 5 жыл бұрын

My truck is a 03 lariat crew cab. So far I’ve installed the rear and passenger side panels of a 2011. Just need to do the driver side.

@shooshinejonnie 5 жыл бұрын

@@BrianBeKillinEm I have 00-02 and 12. Shoot me an email at shooshinejonnie@gmail.com and I'll share them.

@dutch971 5 жыл бұрын

shooshinejonnie - Hi. I’m interested in this also. Can I shoot you an email. I have a 2000.

@bobodine9299 5 жыл бұрын

I have a 2013 door panels you think the wiring would be the same as a 2012

@randallarnett2382 5 жыл бұрын

Can u send me the wire diagram im doing same thing i can paypal u some money

@shooshinejonnie 4 жыл бұрын

Randall, I'm sorry I didn't see this post till today. I usually see comment almost immediately. Did you still need the wire diagrams? Send me an email to shooshinejonnie@gmail.com.

@blkboy1124 5 жыл бұрын

Where are you located?

@shooshinejonnie 5 жыл бұрын

North Carolina.

@blkboy1124 5 жыл бұрын

Did you just do your personal truck or will you install for others?

@shooshinejonnie 5 жыл бұрын

@@blkboy1124 I just did my personal truck. I've thought about following someone else's build and film a video series if they were close by.

@cameronsmith5240 5 жыл бұрын

Where did you find the pin out diagrams? Do you have a diagram for the driver door? I’m doing the same and am totally lost on the drivers side

@shooshinejonnie 5 жыл бұрын

Originally I had someone help me out and find the diagrams for me. I do have them now and for specific years. I have 2,000 to 2002 and also 2012 and 13. If either one of these would be helpful please send me an email to shooshinejonnie@gmail.com And I'll see if we can get you hooked up.

@cameronsmith5240 5 жыл бұрын

shooshinejonnie awesome! Sent you and email