I’d rather have 10 of these than 1 stihl

Nice review. I have the cheaper supmix. They're 54.5cc not 62, it doesnt really matter but a real 62cc saw will smoke it. You're pulling the saw over way too hard, it has a spring assist easy pull starter, pull super easy like your arm is broken and it will start right up. This feature bugs some people but I like it, once you get used to barely pulling on the pull rope it's nice.

I absolutely love the quality and the content of your videos! No bullcrap, and very detailed. You deserve a bigger audience than you currently have! Subbed, liked.

I bought one just because of your review. I really appreciate your review.

Very good review. I’ve owned this chainsaw for about 5 months now and I don’t use it too often. I put at least 6 tanks of gas through it and it’s a pretty good saw. The chain is crappy though but that is to be expected.

I bought one of the blue and white ones over the summer. Amazon delivered it with a corner of the box crushed and I didn't think it was a big deal until I discovered the blade studs were bent. I ended up getting a full return from Amazon and they let me keep the saw, then I discovered those does just screwed out at the time when I did the return process I thought they were retained from inside the crank case. So I repaired it easily. I'm about 3 tanks in and so far it's been great. Plenty of power for the 20" blade and I'm sure it could handle more. The spring assist starting is awesome, I noticed in your video you didn't seem to use it. Just pull the cord slowly until you feel the tension build and then just a bit more and it cranks super easy. Mine usually starts in about three pulls or less, I used it yesterday for the first time In a couple of months and it actually started in two pulls total. I'm still running it on a 25:1 mix for break in, I'm curious to see what it will do with a bit leaner mix and a retune. It's probably not actually 62cc, but whatever size the engine is it has a lot of power for the weight of the saw.

Very good review and you covered all the questions I would have asked. Thank you for your video review.

Spare parts should be ordered from a Chinese online store, e.g. a circuit breaker costs 50 cents. It's a good idea to replace that breaker with a low rocker model, they are also available as self-resetting, meaning that the ignition current comes back on after switching off. Starter rope wheels have sometimes been replaced with these, it costs about $1.50 in China. 🙂

Appreciate the straight up unbiased review. The only comment I might add, having a Similar saw in the Salem Master 6220H, These saws might just fool you with their capabilities. I easily upgraded to a 22" Bar and chain for Both cut depth and Reach when bucking. Less bending is always better. The 62cc saws easily handle most hardwoods to 30"+ with good cutting techniques and I have cut several Trunks up to 38". Keeping the Chain in good condition is Key to a good day in the wood. My 62cc has cut up about 5 cords of 18"+ Black Walnut, 30"-38" Tulip poplar, and a 24" green oak since March. I use a smaller49cc 4 stroke Senix 18" saw for most of the smaller rounds. 18 total cords cut, transported and stacked for splitting.

Excellent review, thank you for taking the time produce this video

Excellent review, site. Thank you

Great review!

I purchased the blue and white version of this saw new in the box on marketplace for $80. I have a half dozen other saws, all Husqvarna and Stihl and much larger. My brother and I have been wondering how these inexpensive saws perform and for the price this seemed like a good way to get one in hand. .....so I was looking for a couple reviews on this model and found yours. I watch alot of product reviews and have maybe left a comment on one or two out of hundreds.... But I wanted to make sure to thank you for your excellent review of this product. It was informative and well produced and I'm confident it was 100% honest. Seeing a review that is more than an unboxing is always a good thing but most turn into someone trying to hard and putting the focus on themselves more than the product. You highlighted the important things that people should consider prior to purchase and didn't get too technical with a bunch of time spent on specifications and head to head contests with products 4-7x more expensive. Your video was well narrated and well edited and was one of the best I've seen on any product. Thanks again for taking the time to post this review, it's something you should be very proud of.

bought this saw last december. you can pull the chord very slowly and when it reaches the end it will rev itself. never had the issue with the on/off switch because i just pull it up slowly and bring it down slowly. processed maybe 20 trees with it. still running great after a year. the saw is a clone of an old echo so i bought a cheap 2 dollar echo tensioner off ebay. now i can tighten the chain from the side instead of the front like a stihl. plan to use it a lot at work this winter before writing a real review. will be bucking and splitting wood for months so we will see how it holds up.

I got one of these a few weeks ago, runs and starts great and will eat anything you throw at it, I dont have to sharpen as much as a saw with an oregon chain. Keep sharp, file the rakers a bit and it tears through everything. used it a handful of times and happy with it!

I also have a China saw as a backup, its not a pro saw , but i really like it, and i did actually ...( change the muffler) so it dosen't get so hot. And as you say , keep the chain sharp, clean it regular...and it actually is a good home saw . Once again, they are not pro , not made for run 4-8 hours straight, each day. But for that price , i will actually try 16 tums blade and see how it handle it . Great review 👍👍👍

Good video man.

I think it's great information thank you

I’ve got the blue and white(slightly upgraded model, what’s actually upgraded, IDK - it looks the same). That thing is a champ….. only ever put ethanol free gas in it, and it starts every time I need it. Chews through everything I’ve tried to cut, never had a failure. It runs until it runs out of gas. Ive used more expensive chainsaws, but this thing worked just as good for less than half the price.

Great review, if I didn't buy 20 in Salem Master I would have bought that one. With all the extra the SM did not come with. The sound coming from that engine sounds like the STILH CHAINSAW.

Cool video

I'm a huge fan . . . Bot 1 a cuppla munts ago . . . Bin using it as my main saw . . . Gives the other 1s a brake . . No complaints @ all . . Still runs like the day it arrived . . I put about 30 tanks of gas threw it . . . On itz second chain now

I have the blue and white model of this saw It is an awesome saw. Fast and powerful However it goes through a lot more gas than any other saw that I have ever used

I own a couple of these now and I love them. They start right up and have plenty of power. The switch is horribly annoying -- I usually keep my thumb on it when running the saw because it will sometimes just vibrate itself to the off position. But I bought some low profile switches on amazon and installed one of those instead of the toggle style switch. Just had to file a bit of the chassis and plastic cover away to get it to fit but its WAY better now.

Any suggestions on a good replacment chain? Thanks in advance

honest man

Excellent review!! I have one of these saws on order. I will be doing a review on my channel later. Like you, I don't review something until I've actually used it. 😄New subscriber here.

Can we get air filters for it ???? What about other parts ????

Routine maintenance also includes changing your fuel filter and to prevent hitting the switch start the saw on the ground and not really suppose to drop start a sawjust my opinion though

You want to be careful using compressed air on an air filter as it can damage/enlarge the filteration holes/ filter membrane. Good video though, much respect and merry Christmas from the uk

I’m sticking with poulan and easy to get parts at reasonable prices 😊😊

Keren mesin nya bro

Your starting problem is because you are starting left handed. You should be doing dropstarting with you holding the saw lefthand on hand hoop and pulling the starter rope with your right hand. The is why the on off switch broke.

HUSQVARNA CLONE,HAD SAME SWITCH PROLEM

I found out after buying a 70cc chainsaw on line it was really a 58 cc saw

You are hitting the switch because you are not starting it correctly. This saw has the « easy start »feature . You pull slowly

Mine says to run it 1:25 mix is that what you were running on yours?

Looks. Rey much like a Poulan pro design,,,,,

What am I doing wrong when I cut something my chain keeps coming lose

Hey man this has easy start on it dont drop start it

It's actually 50 some cc chainsaw

Glad to see you use the unsafe drop start method. I've been starting my saws like that for 40 years without problems. I am not going to put the saw between my legs to start it.

Pull it right handed ,you won't hit the switch.I'm tempted to buy one and see how many cords of firewood it survives. Seemed to run ok.

Cheep or inexpensive ?

Why does it keep deleting my comment I'm only trying to tell you how to add a side chain tensioner

Could I lend your saw

Mine lasted 20 minutes

You need to tune the saw its running too rich lol

Dulmar clone?

Problem is not the saw It’s you. You have to learn how to start a saw is all. I have a supmix. Fantastic saw

03:11....yeah. don't start a $125 chainsaw like this. You are just asking for something to break. No wonder he ripped the toggle switch off the saw. Put it on the ground and give a couple of mellow pulls and it will start right up. This isn't a stihl. Good vid otherwise.

The only value I can see is to take the high road and not buy anything made by a country that is an enemy of the country that protects you from it.

Bla bla bla. Review?