I really liked the tip about the how to untangle the filament.
@LoyalMosesАй бұрын
Thanks! It's funny, it's very simple, but it costs a lot in wasted filament if you try and cheat your way out of it!
@vreedognight4 ай бұрын
We all know the truth! Mrs LM plugs all the printers in and that was your first, awkward, attempt at doing it. We know nothing happens without her! 😛 lol
@LoyalMoses4 ай бұрын
Was it that obvious?!
@vreedognight4 ай бұрын
@@LoyalMoses a little but you played it off pretty well
@brianwilcox25434 ай бұрын
She's the brains of the operation!😁
@russdesigns4 ай бұрын
@@brianwilcox2543if she’s the brains does that mean LM is Pinky??
@William3DP4 ай бұрын
This looks like a nice machine. I wonder how much quieter the printer would be if it were enclosed? And enclosing the printer would make it able more able to print higher temperature filaments (ABS, ASA, etc.) And if it were the size of a Sovol SV08, I would be very likely to buy it...
@LoyalMoses3 ай бұрын
Could help.
@rjakiel734 ай бұрын
$499 is too much for this printer. For $299 you can get the Adventurer 5M and it's only downside is the lack of 3rd party nozzle options. Then there's the Infimech TX (Flyingbear US branch) which is an all open Klipper Core XY with incredible build quality for $299. Lastly the SV08 which is the same price with a 350mm3 build area and pretty much a Voron. So Twotrees needs to drop this price a lot to remain relevant.
@LoyalMoses4 ай бұрын
Lots of options now for sure!
@shanechristiansen384 ай бұрын
I kept looking for the "2 hours later" button, lol. Good review. Definitely better results today than during the live stream.
@LoyalMoses4 ай бұрын
Hehe! Also, yes, great print results!
@shanechristiansen384 ай бұрын
@@LoyalMoses at least if this printing gig fails, you made a very good video resume of being a good cleaning lady...
@zk_63122 ай бұрын
Sounds like you need a quieter fan as well as pwm control for the electronics fan. Looks like a good printer though.
@LoyalMoses2 ай бұрын
I like the printer a lot! It would be a fun one for people to really play with.
@3rdpig2 ай бұрын
I'm curious how this compares to the Flashforge Adventurer 5M. Both seemed to aimed at the same market and are about the same price. You have to do some work to enclose the 5M, but the ability is there and wouldn't cost much.
@LoyalMoses2 ай бұрын
I’m not sure, I don’t have a 5M to compare or I would love to share that!
@martijndeman47894 ай бұрын
Update orca and the sk1 profile is right there. I installed orca first time 3 weeks ago on it was just there
@LoyalMoses4 ай бұрын
Yeah, it actually asked me to update it when I was recording… so I skipped it. 😆
@Salamattder4 ай бұрын
These kind of machines are tempting and I don’t mind tinkering a little bit. But my current 3d printer has basically exhausted me with tuning. I just need something to accurately print dimensions and parts so I can start some projects for my kid and others and know I can promise to get them finished instead of it having to pause and dial in more. Bambu I know is probably the answer but I am waiting for gen 2 x1c. But I’m getting impatient. A lot of multicolor coming out too so I’m going to have to wait. I hate waiting.
@bleach_drink_me4 ай бұрын
Flashforge adventurer 5m has worked out of the box for me. Prints are good quality and everything has fit together. Default profiles are okay but need tweaks for strength.
@AlexanderSmith6004 ай бұрын
Also have been loving the Flashforge 5M - cost less than my Creality K1 and outperforms it in print quality!!
@riceklown4 ай бұрын
Get the A1 mini in the mean time. I bought the A1 mini and X1C at the same time. The A1 has excellent dimensional accuracy and passed the Multiboard test print with default settings, first try. The ring slid right off the tower. If you're waiting for a $1500 machine, certainly you'll love a $250 machine until then.
@bleach_drink_me4 ай бұрын
@AlexanderSmith600 funny you mention the k1. I was going to get the k1 but came across the flashforge. I'm happy with my decision. Truth be told, I actually use the 5m more than the vz330 anymore.
@LoyalMoses3 ай бұрын
A lot of people feel the same way!
@86Carrera9114 ай бұрын
Here I am at 6:47 in the morning watching LM clean a 3D printer...
@LoyalMoses4 ай бұрын
Here I am at 4:49AM replying to you while you watch me clean a printer! What’s wrong with us?!
@86Carrera9114 ай бұрын
I was wondering what I did to deserve this! LOL
@86Carrera9114 ай бұрын
Makes me want to fire the printer up, though!
@LoyalMoses4 ай бұрын
Haha
@berlinberlin42464 ай бұрын
Is this really a native clean Klipper Install? For me its really important.
@LoyalMoses3 ай бұрын
Even if it isn’t, it’s linux, you can do it if you want.
@berlinberlin42463 ай бұрын
@@LoyalMoses no as some manufacturings are using binary blobs for some functions like the LCD communication and this are not available than
@AltZyeus4 ай бұрын
Mrs.LM didn’t have it setup for ya so it was difficult start to the video. We all know she keeps everything going! 😂😂😂
@LoyalMoses4 ай бұрын
You’ve figured it out! 😆
@cdsmakestuff4 ай бұрын
need to update your OrcaSlicer... SK1 is there in the latest build
@LoyalMoses4 ай бұрын
You know why this is funny?! It asked to update while I was recording, and I said no. 😆
@hed4204 ай бұрын
Which fdm printer has the best print quality?
@LoyalMoses3 ай бұрын
Hmmmm… Bambu at this point.
@user-xr3xy3tf1s3 ай бұрын
Can I install multi-color printing here ?
@LoyalMoses3 ай бұрын
With a pallete, sure
@peterpeter56664 ай бұрын
id rather have a p1s for the same money!
@LoyalMoses4 ай бұрын
That’s a great machine!
@nigel58234 ай бұрын
I HAVE ON MY ORCA SLICER TWOTREES SK1 YOU NEED 2.0.0 VERSION THEY ADD LOADS OF PRINTERS
@LoyalMoses4 ай бұрын
That makes sense!!!
@ThingsYouMightLike4 ай бұрын
Talks about energy drinks the same way Mark Zuckerberg talks about Sweet Baby Rays.
@LoyalMoses4 ай бұрын
He talks about what?!
@ThingsYouMightLike4 ай бұрын
@@LoyalMoses Go watch some videos on it. It's pretty funny. Just insists on saying "sweet baby rays barbeque sauce" over and over. All in good fun.
@LoyalMoses3 ай бұрын
Haha! I didn’t know that.
@emmanuelskolinos13614 ай бұрын
Nice at list prusa can sell filaments 😅 sk1 is a solid printer
@LoyalMoses4 ай бұрын
😜
@PieCatArt4 ай бұрын
Hmm that looks very similar to the p1… I mean the ender 5 NO NO I mean the creality k1
@LoyalMoses4 ай бұрын
Haha! Exactly!
@KennethScharf4 ай бұрын
Looks like a Voron Trident clone.
@LoyalMoses4 ай бұрын
Obviously copied from Sovol! 😉
@KennethScharf4 ай бұрын
@@LoyalMoses Sovol's new printer is a Voron V2 clone. Or do they also make a Trident clone?
@keltblioux49673 ай бұрын
Nice video, however, it was hard to hear. The background music dominated the video. Great job, thought, and thanks for all the videos.