Surprising Method for AFDD Testing During Consumer Unit Change

Рет қаралды 19,617

Күн бұрын

When should you consider replacing an existing consumer unit? The circuit protection requirements to meet wiring regulations have evolved over the past decade. Let's delve into why an upgrade was necessary for this fuse board.
During the upgrade, we tried out the new dual-row consumer unit from Lewden and discovered a foolproof way to test an AFDD.
Learn more about the Lewden dual stack range 👉 hub.efixx.co.uk/lewden-dual-stack
Check out the Lewden connector blocks 👉 hub.efixx.co.uk/lewden-blocks
Free Circuit Protection Myth-Busting training module 👉 training.efixx.co.uk/course/c...
Best Practice for Consumer Unit Replacement 👉 www.efixx.co.uk/Know%20How/co...
Check out the Epson LW-Z710 Label printer 👉 hub.efixx.co.uk/epson-lwz710
See how it works 👉 • Epson LW-Z710: Avoid T...
=================
Time Stamps ⏱
00:00 Today we'll be installing a Lewden Double Stack Consumer Unit
00:32 Five reasons to upgrade a consumer unit
00:47 Reason 1 - Regulation changes
01:20 Reason 2 - Surge protection
01:44 Reason 3 - Leakage Current
02:18 Reason 4 - DC Leakage Current
02:50 Reason 5 - Renewables
04:05 Some great installer features
04:45 We've been trying out a new label printer
05:04 A new range of connector (Henley) blocks
05:25 A hot topic - how do you arrange your protective devices?
07:57 Here's how we arranged them in this situation
08:36 Why we've installed AFDDs on this job
09:16 Gordon has found an AFDD tester
10:28 Solar is coming soon on this property
=================
#electricalinstallation #electricians #electricalindustry

Пікірлер: 98

@dsesuk Ай бұрын

I've put hours and hours into building Arc Chamber Mk III this past weekend... and now you're telling me I just need my mother's old Kenwood Chef and a pop-up counter socket??! Pah!

@efixx Ай бұрын

Some say there is a carbon rod in every pop up socket 😉

@_Steven_S Ай бұрын

Just think of the patents Dave 😁

@dsesuk Ай бұрын

@@efixx There's certainly one in Mk III... whether it works remains to be seen...

@tresslerj1985 Ай бұрын

All hail the drunken one!

@jonathanp4128 Ай бұрын

Does it trip a Haeger Single Mod though, that's the real question. Pro Tools might help them narrow it down, and provide that invaluable insight 😂 @@dsesuk

@Dog-whisperer7494 Ай бұрын

Great video Gordon , the reasons for upgrade of the CU I can agree with , in my opinion CU should never of been allowed to be installed in under stairs cupboards in the first place. But what gets my back up is when some electrician’s lie to their customers by telling them that the existing CU is illegal and dangerous and doesn’t comply with the regulations. Then insist that it has to be replaced. I refer you to the onsite guide page 99 . Just because it’s old doesn’t mean it’s dangerous or needs replacing or upgrading. Great video as always Gordon 👍

@TheMatsushitaMan Ай бұрын

never have* been, not "never of been"

@andyburns Ай бұрын

Send it to DSES ...

@JimWhitaker Ай бұрын

5:34 Like that clock. 🙂

@tombickerton5909 Ай бұрын

It’s a neat job and he’s a good electrician too . Great video and equipment too. Learned something today regarding AFDD

@efixx Ай бұрын

Thanks for watching!

@retrozmachine1189 Ай бұрын

The old Chef, I have one of them in the cupboard. Quite a beast of a machine with more attachments than can be imagined, and I think it has a brushed motor but no AFDD should trip from the arcing on brushed motors and glad to see this wasn't the case here either.

@efixx Ай бұрын

A classic of British Engineering lives on forever!

@r.h.8754 Ай бұрын

Most of the sparking comes from the centrifugal speed controller switch - when the motor reaches the desired speed the switch opens thus cutting the power so the motor is actually running at the speed controller switching speed - the switch is continuously opening and closing to keep the motor running at a constant speed.

@ellisgarbutt1925 Ай бұрын

@@efixx Unfortunately not the case these recently scraped a 10 yr old washing machine because he motor failed

@TimmyBoja Ай бұрын

3:19 - NB. "...the power can flow in the reverse direction." Great to see eFixx getting it right! Too many sparks talk of reverse current. 👍

@TimmyBoja Ай бұрын

10:51 - I love that word clock. They seem to vary in price wildly! 😱

@thattoolguy9432 Ай бұрын

A fellow QLOCKTWO owner , neat install

@sergiofernandez3725 Ай бұрын

The CU does not have to be Instagram ready but is should be Square, straight and Plumb it should be suitably Selected & Erected

@andyhodchild8 Ай бұрын

I have just replaced my 12 year old wylex 11 way RCBO board for exactly the same reason and because I needed more ways with going all electric. I used a 25 way Hager board with all what you're fitting and fitted a bidirectional RCBO on my existing solar. I live in a small but very well insulated bungalow with solar PV (SE) and solar thermal (SW). I have an Eddi doing the morning shift and thermal doing the afternoon. I dread to think how many ways you need in very large property going forward.

@efixx Ай бұрын

can’t see them getting smaller

@T_Perkins Ай бұрын

No solar, no car charging. Eco 7 1 bed flat. 15 on peak + 2 for surge 4 off peak + 2 for surge 21+8 way fitted Chap who fitted the boards was just giggling because he thought I was over speccing at first... It did dawn eventually being an electric only - so many places have gas heating and require much less circuitry!

@barryhodgetts5918 Ай бұрын

I suppose I am showing my age saying we had one of those mixers. (it got damaged a few years ago while extending the kitchen) Having repaired it in the past the speed control was by two contacts breaking the supply to the motor. One contact moved due to the centrifugal force from a couple of weights spinning around while the other contact was spring loaded from memory with more pressure the faster you wanted the mixer to go. The system finding a happy medium with the centrifugal force balancing the spring pressure. I suppose it worked but produced a lot of sparks so really surprised you got ot to work at all on the AFDD circuit. Maybe a good buy from a second hand shop as a cheap tester for AFDD😂

@efixx Ай бұрын

Great insight thanks - might have to take a closer look at the motor control.

@Stueyb22 Ай бұрын

Tripping AFDD/RCBO - Does your pop-up socket contain a type 2, 2+3, 3 SPD? I've found quite a few instances of surge protected extension leads/multi-gang leads causing nuisance tripping with the SPD threshold voltage decreasing with age/being naturally low, mixed with reactive loads it can be quite an issue.

@imark7777777 Ай бұрын

Interesting my suspicion is there's something that's weird in the pop-up socket which is compounded by maybe the additional fix to the cord and motor characteristic?

@CountBOBOinDAhouse Ай бұрын

Could you explain your point from 3:10 a little more please. Why would the power be travelling in the reverse direction?

@chrisswindell7517 Ай бұрын

Does the pop-up socket have a filter? It could be a mixture of the noisy triac based speed controller and a filter doing its best to dump all the noise to earth.

@efixx Ай бұрын

Don’t think so but we’ll investigate

@r.h.8754 Ай бұрын

The Kenwood A701 (the model shown) has a centrifugal speed governor the setting of which is controlled by the speed control knob - when the motor reaches the desired speed the governor opens a switch thus cutting the power to the motor. Although there is some capacitor-based suppression a considerable amount of sparking still occurs which is probably why the AFDD trips - it can also mess up radio reception. The mixer is class II insulated and doesn't have an earth connection. PS I've just had to say goodbye to my A701 - they were made to last!

@professionalineverything Ай бұрын

Will AFDDs trip if I am using CMH-TT, SON-T lamps. If so I am moving to electronic ballasts for them.

@ladams5356 Ай бұрын

Great video . Experienced spark know how specifically knowing to create an air gap where possible around mcb’s with sustained high load 👍👍👍👌

@efixx Ай бұрын

Great to hear!

@simoncollas2383 Ай бұрын

any chance of link to the Epson DB label printer please.... like the look of that !

@efixx Ай бұрын

Here it is 👉www.docs-store.co.uk/product-page/epson-labelworks-lw-z710

@simoncollas2383 Ай бұрын

thanks Guys @@efixx

@therealdojj Ай бұрын

I really wanted to have a pop up socket installed But I'm glad we're didn't But if be really interested to find out what is faulty with it 👍

@simoncroft9792 Ай бұрын

Tidy network installation too.

@ellisgarbutt1925 Ай бұрын

Interesting video you should install a a hagr afdd and see if the mixer would trip it or not got a kitchenaid mixer

@MartinE63 Ай бұрын

3:09 Are there any markings to determine which manufacturers RCBO’s are unidirectional and which ones aren’t?

@T_Perkins Ай бұрын

Double pole perhaps? Where by both the live and neutral are being monitored?

@ladams5356 Ай бұрын

It’s a good point and hope a standard is agreed and manufactures apply

@ladams5356 Ай бұрын

@@T_Perkins I believe his question is , is there a symbol on the device indicating if it is capable of correct operation with current flowing in either direction. I don’t believe there is a symbol as yet that a standard specifies . @Efixx ?

@T_Perkins Ай бұрын

@@ladams5356 now you mention it, I haven't heard of a standard. However, if the schematic is drawn on the device itself, one should be able to determine its operation or reading a technical diagram for it. (I do get the point being made a bit more however) Unfortunately, mobile phone do mean there is a penny pinch in companies to say 'info is available online' rather than trying to describe anything in packaging or on the product that isn't required by law. But yes, I see the point that is being mentioned - I'm not clued up on solar or battery installs as of yet so I assumed that perhaps double pole rcbos would monitor both live and neutral as AC is alternating back and forwards... By that definition double pole rcbos should be able to monitor both incoming and outgoing changes on both live and neutral. That's my forth pence of an assumption! :)

@ladams5356 Ай бұрын

@@T_Perkins while AC ‘will’ flow in and out of the mcb portion some manufacturers leakage architecture uses CT’s which are flow direction consensus and hence detection is inoperable in reverse. If you note AC CT’s are directional 👍

@andrewjames3908 Ай бұрын

I dont get the trend for fitting dual stack units, wouldnt a vertical 3 phase one with a single phase conversion kit fitted be easier to work with?

@T_Perkins Ай бұрын

Familiarity is a word that comes to mind, especially on the consumer end. The double stack units take up less space per way than a 3 phase, however marginal. Also, if by vertical you mean the ways centrally going top to bottom, cable length may have been an issue. Trend it may be, but familiarity I reckon is the key to most of it. Up and down. Rather than left and right being the same depending on which bank... I can just imagine trying to have the conversation with me ol ma with a 3 phase board... Left and right... No. I'd rather rip tarmac off the road in 0 degree weather thanks...

@markpotter8280 Ай бұрын

Just a question I thought the outer sheaving on the tails are meant to butt up to the main switch in the DB, am I wrong in thinking this?

@efixx Ай бұрын

You need to remove a small section of the protective sheath to indicate the polarity of the conductors

@markpotter8280 Ай бұрын

@@efixx Thankyou for letting me know I get the point

@eddiereed5025 Ай бұрын

Not best practice I believe plastic indicator sleeves used by DNO better .@@efixx

@TurboBaldur Ай бұрын

When it comes to RCBOs, they exist in both single pole and dual pole versions, with the dual pole also interrupting the neutral wire on a fault. In what type of earthing system or use case is the single pole deemed insufficient and a dual pole is required?

@efixx Ай бұрын

TT must be double pole. TNCS can be single unless supplying a defined special location such as an EV charger.

@pramodgavit7666 Ай бұрын

Sir How much leakage current is permissible in domestic circuit.and how to measure?

@raychambers3646 28 күн бұрын

Was the italianin stallation based around a lot of plastic casings ?

@efixx 28 күн бұрын

Most properties in Italy are based on concrete construction so fire risk is less of an issue.

@mw0358mw Ай бұрын

Need a link for the clock on the wall!

@efixx Ай бұрын

It's called a Qlocktwo - sit down when you google it.

@AndyK.1 Ай бұрын

What an AFDD cliffhanger.

@eliotmansfield Ай бұрын

shitty clickbait more like 😠

@bigjd2k Ай бұрын

The mains filter caps regularly fail in those old mixers!

@freddiewithers9617 Ай бұрын

The magnetron in old microwaves causes havoc with these devices. This is compounded by the fact that many in HMOs where they are mandatory have rubbish old devices running in their rooms causing nuisance tripping. Total nightmare tbh

@efixx Ай бұрын

Some would say that’s the real driver for moving to AFDDs

@freddiewithers9617 Ай бұрын

Yes, filters out old junk. However leads to some heated conversations with landlords/Tennant's and often involves several call-outs before the issue is resolved. Kinda awkward to charge for after charging a fortune for board change with afdd's.

@deang5622 Ай бұрын

Get a digital storage oscilloscope on to the line driving the pop up socket. Get one that does FFTs, just in case that is useful.

@efixx Ай бұрын

We’ve got one at the unit - perhaps a weekend job.

@deang5622 Ай бұрын

@@efixxWould love to see a video of the waveforms you encounter which trigger the AFDD. That would be really useful for everyone Lightening - not dissimilar to lower voltage arcing! - causes I believe wideband RF interference; I don't what waveform aspects these AFDD's trigger on, it could be a waveform shape in the time domain, or a particular spectrum in the frequency domain.

@mfx1 Ай бұрын

Does it trip Hager AFDDs ?

@TheJoeyDeacon Ай бұрын

Type 2 SPD? On overhead power lines??? Am I the only person splashing out for Type 1s?

@charleslockerbie4027 Ай бұрын

I agree, overhead lines should be type 1. Perhaps tho the overhead lines /transformer are just random B roll and not actually the supply for this property

@efixx Ай бұрын

The overhead lines are to an 11kV transformer which converts to 230 /400 network which is underground and TNCS .

@craigharvey17 Ай бұрын

Was that a type 1 or 2 spd?

@efixx Ай бұрын

Type 2 as the supply is TNCS

@_Steven_S Ай бұрын

But will it trip a Hager AFDD?

@paulmatthews5470 Ай бұрын

Will it shite. I have 15 of them (trying them for myself) and never tripped with a dodgy heater arcing away and melting the plug top! Won’t be installing the Hagers for customers.

@redcar2011 Ай бұрын

How come you're eating the cake And Poor Ross is in the cupboard like Harry Potter. I don't see any cake and tea of him FREE ROSS✊️😂 P.S nice work ross👍🏻

@efixx Ай бұрын

Ross loves a cupboard he’s graduated from under the floor in an earlier video!

@AndrewLumsden Ай бұрын

I would still replace the cable on the Kenwood!!

@TimmyBoja Ай бұрын

5:14 - why are these all still rated at 100A? If the main fuse is 100A and you are adding 16A or more, these need to be rated higher - especially when there are multiple DBs running off them

@AndyK.1 Ай бұрын

8:37 AFDD

@DH-tv2yw Ай бұрын

Probably a switching power supply on the same circuit. Or something WiFi related. It will be something that you dont expect.

@efixx Ай бұрын

Oh no not the dreaded EMI

@DH-tv2yw Ай бұрын

We have the same issues in our home. Some appliances trip the AFDD, but you move it to a different circuit and they are fine. You switch other items off and you can use it on the original circuit. Seems to be electronic devices mixed with electrical devices that causes the tripping. Can use the TV or the hairdryer, but not both together.