Surprising Tool Malfunctions Exposed
Рет қаралды 6,712
Күн бұрынDiscover the worst tools on the internet, from feather boards to scribing tools to lasers and chamfer planes. Find out what tools to avoid in this video!
Thanks to Kospet for sponsoring this video.
Get the same KOSPET TANK M3 ULTRA Smartwatch：s.zbanx.com/r/LWgcmndFwjdr
Discount Code： KOLNPUT
Find more interesting watches: s.zbanx.com/r/Oa89U5x1tCZY
Please check out the new website for links to shirts, tool recommendations and much more!
WWW.FLYNNDOGGWOODWORK.COM
Related Videos:
- Wixey drill press laser installation and set-up video - • Mastering Accuracy: Th...
- Mileseey DP20 Pro laser level video - • Unveiling the Latest D...
- Featherboard Build Video - • Improve Your Woodworki...
- 3D Laser Level Video - • The Secret to Budget-f...
To check out any of the tools featured in this video, please visit the affiliate links below:
Items To Get:
- "Measure Cut Swear Repeat" T-shirt - www.flynndoggwoodwork.com/shop
- Ryobi Airstrike Brad Nailer - amzn.to/3yQilJW
- Laser for Drill Press - To Be Determined...
- Nova Voyager Drill Press - amzn.to/3VnhQPh
- Magnetic Sewing Light - amzn.to/3KEyDZ2
- Mileseey D9 Pro - amzn.to/3VBARP5
- Hedgehog Featherboard - amzn.to/3VAEtRz
- Bow Featherboard - amzn.to/3XepNc4
- Milescraft Featherboard - amzn.to/45jF8Kk
- Kreg Router Table - amzn.to/3Xia2ke
- Duvoh 4D Laser Level - amzn.to/4bXH4uA
- Goingmake 32" T-Square - amzn.to/3VBo0wr
- Sanding Mouse Block - amzn.to/3yXRdZG
- Yonico Router Bit Set - amzn.to/4bSjxLB
- Bench Dog Block Plane - amzn.to/4b3K2fM
- Titebond II Wood Glue - amzn.to/3KAyo1g
- Small Level - amzn.to/4aTgdi5
- Corner Clamps - amzn.to/4cgxBOF
- Bora Outfeed Rollers - amzn.to/3RlX9Su
Items To Avoid:
- Linknal Brad Nailer - amzn.to/3RmNdIo
- Wixey Drill Press Laser - amzn.to/3Vyz4ud
- Mileseey DP20 Pro - amzn.to/3Vi8t39
- Somerfeld Tools Unique Featherboard - amzn.to/4cf02wC
- Takamine 4D Laser Level - amzn.to/3yZndwA
- Gypsum Board Cutting Tool - amzn.to/4cdXChv
- Chamfer Plane - amzn.to/4bWJKsl
- Glue Bot - amzn.to/4cf0ATc
- Collapsable Level - amzn.to/3VBwzaq
- Spring Loaded Corner Clamp - amzn.to/4elrs5C
- Woodriver Outfeed Rollers - amzn.to/45j9IUq
Video Chapters:
00:00 - Introduction
01:11 - Linknal Brad Nailer
03:38 - Kospet Watch Advertisement
06:09 - Wixey Drill Press Laser
08:16 - Mileseey DP20 Pro
10:21 - Somerfeld Tools Unique Featherboard
12:09 - Takamine 4D Laser Level
13:41 - Gypsum Board Cutting Tool
14:51 - Chamfer Plane
16:41 - Glue Bot
17:43 - Collapsable level
18:47 - Spring Loaded Corner Clamps
19:36 - Woodriver Out-feed Rollers
20:51 - Closing
My favorite tools you might see in my shop:
Major Tools:
Jet Bandsaw - amzn.to/3IhIvHP
Nova Voyager Drill Press - amzn.to/446gHhH
SawStop 3HP - amzn.to/3XeN9dL
DeWalt Table Saw - amzn.to/3YuRWsU
Festool Kapex - amzn.to/3JNvYNG
Dewalt Compound Miter Saw - amzn.to/3JLyxj3
Jet 8'' Jointer - amzn.to/3I1NGvf
DeWalt Thickness Planer - amzn.to/3X91dWg
Shelix Cutterhead for DeWalt Planer
DeWalt Router - amzn.to/3Ypl84o
Bosch 2.25HP Router (In Router Table) - amzn.to/40TeIfD
Kreg Router Table - amzn.to/3ljpbkg
Kreg Router Lift - amzn.to/3liJMFK
Festool Cordless Track Saw - amzn.to/3DKiFtk
Festool Router - amzn.to/40LHL4B
Festool Carvex - amzn.to/43h1zyv
Shaper Origin - amzn.to/41fO3cq
Shaper Workstation - amzn.to/418VqlS
Measuring/Marking
Woodpeckers 642 Square - amzn.to/3wY94vl
Woodpeckers TS 32 T-Square - amzn.to/3Gvmx2H
Paolini Pocket Rule - amzn.to/4194fw6
1-2-3 Block - amzn.to/3A2CRUY
Finishing/Sanding
Festool 5'' Sander - amzn.to/3RC4a0o
Festool 6'' Sander - amzn.to/3jD7coG
Rigid Oscillating Belt/Spindle Sander - amzn.to/3MCGjNw
Jet 1632 Drum Sander - amzn.to/40RXejN
Joinery
Self Centering Dowling Jig - amzn.to/3Xaapd7
Kreg Pocket Hole Jig - amzn.to/40Ksf9E
Festool Domino Joiner - amzn.to/3YaqG32
Drills/Drivers/Nailers:
Festool Impact Driver and Drill Kit - amzn.to/3RBgga6
Ryobi Brad Nailer - amzn.to/3jyBCsf
Festool Compact Drill - amzn.to/3ZONw0d
Thanks for watching! :)
#flynndoggwoodwork
#woodworking
#amazingtools
#woodworkingfun
#woodworkinghacks
#woodworkingtips
#beginningwoodworking
#toolreview
#diy
#easywoodworking
#woodworkinghacks
#woodshop
#woodworkinggadgets
#gadgets
#reaction
#cheaptools
#affordabletools
#newtools
#toolreaction
#kospet smartwatch
#ruggedgirl smartwatch
#smartwatch
#Kospet Tank T3 Ultra
#kospet Tank M3 Ultra
@jokerjr.4849 19 күн бұрын
This is the kind of tool review I like. 6 months of using the tool in a real world situation. Hats off to you Flynndogg. Keep up the great work. 👍
@FlynndoggWoodwork 19 күн бұрын
I agree! A lot of the tools look great in the beginning but they need a little time to make sure they work properly. Thanks so much for watching jokerjr!
@jeffstanley4593 19 күн бұрын
Hey Flynn, you are right, the Gluebot sucks. Here is something I have learned over time. As you said, keep the glue in the original container. The trick I learned is to store the bottle upside down. I drilled a hole that would allow the nozzle and the screw down to be recessed into a "holder" made to hold more than one bottle or even more than one shape of bottle. Even if you store a gallon jug, store it upside down. This will keep the glue from solidifying on top blocking the hole. Any solidifying will be on the bottom of the glue container away from the nozzle.
@FlynndoggWoodwork 19 күн бұрын
love this idea. I actually have a holder I made similar to what you are talking about by using a couple of forstner bits to drill out an upside down holder. I have also found that sticking the bottle in a dog hole works too. just have to make sure that bottle is clean before you put it in there! :). Thanks so much for watching Jeff!
@joegutierrez4197 19 күн бұрын
I hope your dog is okay with that!!!😂😂😂
@FlynndoggWoodwork 18 күн бұрын
@@joegutierrez4197 Haha! OMG I'm dying!
@markhagstrom2659 17 күн бұрын
I purchased the Wixey drill press laser and found the same problems you uncovered. I am notorious at leaving battery powered devices powered on and almost always have to replace the batteries before the next use. You do a great job for most tool reviews so I'm. You have a great channel keep up the great work.!
@FlynndoggWoodwork 14 күн бұрын
Well hopefully your lasers still work. Still can't figure out why mine burned out (if that's what happened). Thanks so much for your compliments. Really appreciate it and have a great week! :)
@peterferrydriver 16 күн бұрын
We made a small wooden sailboat five years ago, and we bought a large container of Titebond III. We refilled the glue bottle often and it worked like a charm. I use it often now for smaller projects and it still works well. There is some cleaning maintenance required, but I've had good luck with it and it's one of my useful tools.
@FlynndoggWoodwork 14 күн бұрын
So happy it's worked for you Peter. Sounds like some people have success and others have issues. I'd love to see that sailboat. That sounds like a big project! Very cool
@lhhood423 19 күн бұрын
Thank you Flynndog! I appreciate the honest reviews and after use follow up. Keep up the great work!
@FlynndoggWoodwork 18 күн бұрын
Thanks os much! I appreciate that and thanks so much for watching. Means a lot! :)
@w9jim 19 күн бұрын
Looking at the stuff you buy, I'm surprised this list isn't 10 times longer.
@FlynndoggWoodwork 19 күн бұрын
Haha! Thanks for watching w9jim!
@PelicanPointeMusic 18 күн бұрын
EXCELLENT follow up on these tools! It's hard to find long term follow up reviews on almost any tool so this is appreciated.
@FlynndoggWoodwork 16 күн бұрын
My pleasure. I'd like to continue to do videos like this as well. Top tools videos as well as dud tools videos. Thanks so much for watchign PelicanPointeMusic!
@kwilliams2239 19 күн бұрын
I looked at the Woodpeckers chamfer plane too. I didn't think I'd use it enough to justify it. I bought the Hongdui CR-MulTrim, which has round-over and chamfer blades. I think it's better than the one you have because it has carbide inserts, instead of steel cutters. The carbide inserts have a chamfer cutter on two sides and a round-over profile on the other two sides, giving four carbide cutters, of each profile. I don't know where to buy replacement cutters and I'll probably never need them. I haven't used the tool since I got it, perhaps a year ago. It's a beautiful hunk of aluminum and stainless but I'll likely never remember that I have it, if I ever need it. A trim router and bit is my go-to solution too.
@FlynndoggWoodwork 19 күн бұрын
Oh nice! I'll have to take a look at that. Sounds like a better design. I think what you spoke of is the problem with mine as well. I never think of using mine either. Kind of sits in a drawer, and I go for more conventional ways of putting in a chamfer. Thanks so much for watching kwilliams!
@robertberger8642 19 күн бұрын
THIS! We need reviews that show what happens after long-time use. First impressions are so often wrong.
@FlynndoggWoodwork 18 күн бұрын
Totally agree Robert! Really appreciate it and thanks for watching!
@a9ball1 19 күн бұрын
Brian, I think this is one of my favorite videos from you. I love the honesty. I'm seriously looking into that watch. I have the Ryobi nailer and love it. I've never had an issue with it. I hope you do more videos like this one. Honesty goes along ways nowadays.
@FlynndoggWoodwork 18 күн бұрын
Thanks so much a9ball1. I totally agree. I will be doing at least one of these a year. I completely agree with you on the honesty part. NO better way to be! :). Thanks so much for watching!
@PoorJohnn 19 күн бұрын
Please do more of these. Saving us money.
@FlynndoggWoodwork 18 күн бұрын
Haha! I'm sure I will Poor Johnn! Thanks so much for watching! Really appreciate it!
@TomSL55AMG 20 күн бұрын
Thanks for the honesty.
@FlynndoggWoodwork 20 күн бұрын
Thanks for watching Tom! I appreciate it! :)
@GuillaumeDuteil1 16 күн бұрын
Thanks for doing so. Having a real life review is very valuable. I guess the natural conclusion is to not do reviews just after purchasing new tools to avoid recommending bad tools. Will you stop new tools reviews?
@FlynndoggWoodwork 14 күн бұрын
Oh no, of course not. I am too much of a tool junkie to do that. I will do updates if I have issues. I've done probably close to a thousand tool reviews, and it was even a little difficult to for me to come up with this list. I typically don't even show a tool if it sucks right out of the box. Thanks for watching GuillaumeDuteil
@patcross5799 20 күн бұрын
Well that was interesting, a few of your observations lined up with my concerns, particularly the folding level and the corner clamps. Still it was a fun video to start out my Saturday. Have a great weekend and thanks for the Crow Vid.
@kwilliams2239 19 күн бұрын
Yeah, the corner clamp sure looked suspect. I'm not a fan of any corner clamps but these looked really weak. Even if the springs stayed where they should, it didn't seem like there was anything keeping the corner square. A parallelogram or trapezoid wouldn't be apparent. It was a "pass" from me, the first time around.
@FlynndoggWoodwork 19 күн бұрын
Thanks so much Pat! I glad you liked the video. I'm going to try and keep track of items like this for future videos. I even have a notebook in my shop now to keep track! Have a. great weekend!
@denisbeaudry5396 20 күн бұрын
Great video, nice to see the honesty. Channel keeps growing and you deserve it. Most active woodworking KZfaqr at this time I would guess.
@FlynndoggWoodwork 19 күн бұрын
Thanks so much Denis! I appreciate that. I'm trying. Having fun doing the channel for sure. Thanks so much for watching!
@joegutierrez4197 19 күн бұрын
Thanks for the info. I thought I was using the Gluebot wrong! It works great with salsa!!! Blessings!!!
@FlynndoggWoodwork 18 күн бұрын
Haha! So there is a practical use for it! :). Thanks so much for watching Joe! :)
@Damon_Barber 20 күн бұрын
You need a metric pencil for the gypsum board cutting tool. 😂😂
@FlynndoggWoodwork 20 күн бұрын
Haha! If that is a thing, I can understand why I have a hard time finding it in the US!:). Thanks so much for watching Damon!
@michaelkelley6905 17 күн бұрын
On some of those digital tools, I was quite skeptical when you reviewed them originally. it may be a little confirmation bias that I remember the ones that looked suspect. Enjoyed the review good job and thanks again. I’ve got a bunch of tools that are just gathering dust also.
@FlynndoggWoodwork 14 күн бұрын
Thanks so much Michael. I feel like that's the nature of the beast. I tend to buy stuff and then, forget I have things 1/2 the time or misplace things. This channel doesn't help! :)
@The3wheelin 20 күн бұрын
Agree 100% on the glue bot. I kept seeing these great reviews online, and thinking I must be stupid.. finally threw mine out...pure junk!
@kwilliams2239 19 күн бұрын
I don't have a problem with them. I never get glue separation, as evidenced in Dogg's. They work. In fact, I was about to buy a couple more (for TB-II and TB-III).
@The3wheelin 19 күн бұрын
@kwilliams2239 ...seems like a hit or miss product. Glad it works for you
@FlynndoggWoodwork 19 күн бұрын
Sounds like some people have better success than others. But after giving 3 of them a shot. I think I'm done with them as well. Thanks so much for watching The3wheelin!
@a9ball1 19 күн бұрын
I bought one and it's trash. I tried using Teflon tape to help but it didn't. Funny thing is I bought the smaller one from milescraft and it works great and is still working.
@FlynndoggWoodwork 18 күн бұрын
@@a9ball1 Interesting on that milescraft one. Doesn't surprise me. Seems like a lot of milescraft tools are quite good quality wise!
@lespaulguitarmn1 19 күн бұрын
Sorry about the outcomes encountered Mr Flynndogg but truly respect the transparency and honesty with your follow up reviews after more hands on time with these products! Your the best glad to see you enjoying your new shop and the conditioned environment! Relieved the shop dog wasn't included on this! :)
@FlynndoggWoodwork 19 күн бұрын
Haha! I really appreciate it! Loving the new shop. It's amazing how much a difference a little cool air makes this summer! Thanks so much for watching as always lespaulguitarman!
@MakeWithMike 19 күн бұрын
Flex Brad nail os the best in my experience/comparison any one else flex 24v ?
@FlynndoggWoodwork 18 күн бұрын
@@MakeWithMike Thanks for sharing MakeWithMike. I'll have to check that out. I've not owned any flex tools but always wanted to check them out!
@MakeWithMike 18 күн бұрын
@@FlynndoggWoodwork Yes start getting it now while there are a little cheaper not much cheaper but cheaper than the other ones and they have their lifetime warranty, There's a battery issue where people thought it was liquid back in 2022 but that's been taken care of and it wasn't battery liquid it was a piece of plastic inside the battery that was getting hot and melting they no longer put that in there
@FlynndoggWoodwork 14 күн бұрын
@@MakeWithMike Oh nice. I did check them out after you commented. Man, they are quite a bit more pricey than what I thought they would be, I think i will check them out though. I've seen so many commercials for them and always wondered about their quality. Sounds like it is pretty good from your experience!
@patrickbrown551 20 күн бұрын
Thanks for the video.
@FlynndoggWoodwork 20 күн бұрын
Thanks for watching Patrick!
@norm5785 20 күн бұрын
Use overtime definitely does make a difference. Thank you for sharing. Stay safe, warm, happy and healthy. From Henrico County Virginia
@FlynndoggWoodwork 19 күн бұрын
Totally agree! Kind of like when that new car smell wears away! :). Thanks as always for watching Norm!
@klmbuilders5385 16 күн бұрын
I have a similar outfeed roller stand. I finally welded the roller mount to the stand. The other problem of the stand collapsing was cured with addition of a stabilizing strut between the legs. Things that the original manufacturer should have pre-engineered into their product.
@FlynndoggWoodwork 14 күн бұрын
Oh nice! Thank you so much for sharing this. Those are some great ideas to stabilize it. I totally agree, It sounds like a lot of people are having the same problems with them. Seems like they should have fixed these issues by now! :(. Thanks so much for watching klmbuilders!
@Dragonited 19 күн бұрын
I used teflon tape on the threads on my Gluebot and it works perfectly when I use it. My rubber seal broke so thats when I put on the tape. You have to reapply the tape when you fill it up though but it will keep itself sealed. It also works to extend the shelf life of opened caulk and silicone tubes.
@FlynndoggWoodwork 14 күн бұрын
Excellent tip Drgonited! Thanks so much for sharing. I'll have to give that a shot and see if it works for me. Thanks so much for sharing and watching!
@hansangb 19 күн бұрын
@17:30 That's odd. I've had my glubot for about 4 years with zero issues.
@FlynndoggWoodwork 19 күн бұрын
I'm glad you've had better luck! It's a great idea, and I wish mine worked better. Thank you so much for watching Hansangb!
@liquidrockaquatics3900 19 күн бұрын
The gluebot is helpful for big projects when you are getting glue in gallon jugs. I have had two for over a year and the seals are fine
@FlynndoggWoodwork 18 күн бұрын
I'm glad they have worked out for you liquidrockaquatics! I wish I had the same luck! :). Thanks so much for watching!
@painterman8863 20 күн бұрын
Get the houngui Bevel plane, mate. It's more expensive, but it's a beautiful tool. Much,much better then that cheap one.👍 Thanks for the video's from over the pond in England. ❤
@FlynndoggWoodwork 19 күн бұрын
Someone else mentioned that as well Painterman! I'm definitely going to have to check that out. Thanks so much for the suggestion and I appreciate you watching!
@painterman8863 18 күн бұрын
They make some very high end tools👍👍@FlynndoggWoodwork
@Pat64783 20 күн бұрын
Sure glad I didn't get one of those cordless brad nailers but I'm still looking for a good one that is dependable like that Ryobi.
@FlynndoggWoodwork 19 күн бұрын
You it's funny you mention that. It was another viewer's comment a few weeks ago that did buy the nailer and had the same expereince as me. Worked well at first and them used it on hardwood and it failed like mine. When I read their comment i thought it was worth making this video.
@a9ball1 19 күн бұрын
I have the same Ryobi one and love it. I think it's one of my most used tools.
@smorgasbord42 19 күн бұрын
Not that this helps make the chamfer thing you bought any more worthwhile, but you can sharpen all those cutters on the flats. Agree with the above reference to the Hongdui version for chamfers/rounds, but it's not cheap. And FWIW, my Wixey drill press laser is still going strong after 3 years. I agree that not having auto turn-off is a problem, but nothing replacing the batteries didn't fix for me. Maybe I just jinxed it?
@FlynndoggWoodwork 19 күн бұрын
Haha! I hope you didn't jinx it! I've been trying to find another one by another brand but no luck so far. Looks like wixey has a monopoly on the market! :(. I may end up with another one even though I'd like to try another brand. Best of luck to you smorgasbord!
@oldguy1030 18 күн бұрын
Good video. Pretty much all of it makes good sense. However, in my particular case I'm happy with my collapsible level. But that's because I will likely never use it for woodworking! The one I got is fairly accurate and since it will likely be used less than a dozen times per year for helping level my travel trailer. Given infrequent use it is likely to last me for years to come - and I'm not all that worried if it is a just a little off. But for woodworking? Not going to be used for that at all and I've no real disagreement.
@FlynndoggWoodwork 14 күн бұрын
Haha! I'm glad it's working out for you! :). I think the one I got was kind of a knock off of the higher priced one and that's probably why it is getting so off. Thank you so much for watching and commenting really appreciate it! Have a great week!
@terekschultz1230 19 күн бұрын
The only time I'd even think about putting glue in a different bottle is if I was using so much, I was buying the gallon jugs. The rest of the time, it's not worth the trouble. As for the rollers, I have some husky ones that I try to use with my planer for long boards. No matter what I do, they won't stay in the correct position and sink after a board or two.
@FlynndoggWoodwork 19 күн бұрын
Sounds like the rollers have problems no madder what brand they are. And I totally agree with you. Better just to keep the bottles in their original container. I used to buy gallon jugs of glue. But never went through them quick enough! :). Thanks so much for watching Terekschultz!
@Imtheonewholetthedogsout 19 күн бұрын
Formerly baddog, I totally agree one the glue bot plus win it gets low you have to squeeze the heck out of it to even get anything out 🤦♂️
@FlynndoggWoodwork 19 күн бұрын
Yep, that definitely the truth. I think that's when the seals get messed up too! Thanks so much for watching lmtheonewholethedogsout!
@anthonyp1625 14 күн бұрын
Thank you...
@FlynndoggWoodwork 14 күн бұрын
Thanks for watchign Anthony!
@Damon_Barber 20 күн бұрын
🤔 maybe try putting some Saran Wrap and a rubber band over your GlueBot caps? I know you shouldn’t have to rig up a tool, but seals are bound to breakdown. Making Lemonade out of lemons is sometimes necessary. You already have 3 of them, so might as well try to make them work again.
@FlynndoggWoodwork 19 күн бұрын
You know that's not a bad idea. Probably not doing to remember to do it! :). but I'm sure that would work! :). Thanks so much for watching as always Damon!
@davidcurtis5398 16 күн бұрын
Only thing I have that you have on this video is the glue bot and I never use it for the same reasons. I love the original glue container with a holder from Rockler that mounts on a wall surface and holds the glue container upside down. Glue is always ready and no air can get in.
@FlynndoggWoodwork 16 күн бұрын
I've seen those rockler glue holders before. Good to hear they work well. I've thought about getting those in the past. Thanks so much for sharing and watching David!
@karlriley1314 18 күн бұрын
I went to there site but it didn't say what comes with the watch. It listed that a charger cost $19.95. Does it come with a charger?
@FlynndoggWoodwork 18 күн бұрын
Yes! The charger comes standard with the watch. Really quite a nice unit!
@terrydawson5304 20 күн бұрын
The goinmake tools I bought I'm pretty happy with so far especially the pocket hole jig. It's made with aluminium and not plastic being a machinist by trade steel always seems to last longer. And my luck if I drop it its surely going to break lol. Next one I want is the T square. Keep it up Dogg love your channel.
@FlynndoggWoodwork 19 күн бұрын
Totally agree! I love all the goingmake items I've gotten so far. Really high quality from what i've seen. I probably should do a similar video with best of in the near future. I'll probably do that near the end of the year. Thanks so much for watching Terry!
@joshuapuyear6818 18 күн бұрын
Well, good sir. I have to agree with you on the glue bot. I got one when I first started woodworking. And the reason for that is I get my glue in gallon jugs. But after the failures of the glue bot, I went to amazon and got cheap condiment bottles. And I got 6 of them for under 20$. And I have only used 2. 1 for glue, and 1 for mineral oil for my cutting boards
@FlynndoggWoodwork 14 күн бұрын
Excellent glad to hear I'm not the only one. I did the same thing with the condiment bottles. I kept on losing the caps though and the glue would dry up. Not the bottles fault but mine! :). Thanks so much for watching and sharing Joshua!
@themeat5053 20 күн бұрын
Dogg man, you're eating humble pie because you have more tools than one man could ever use in his lifetime. Hopefully you can recuperate some of your expenditures at the recycling yard (or passing them on to some unsuspecting newbie woodworker). Woodpeckers...push ups. Well, our brother, new doesn't always mean better, but can be fun for awhile. We love the wry smile on your face with that level. What ever made you think that was a good idea? You may be able to clip a couple of coils off the end of those springs and re-install them for the clamps. Free shipping...holy cow, push ups and pull ups. Effing Burt.
@FlynndoggWoodwork 20 күн бұрын
Haha! Love it. Yeah, I'm a sucker for any new design even if it is crazy like that level! :). That's exactly what I'm doing with a lot of tools. I've got a bunch se aside to either sell or give away. Some of them are quite good, just don't need two of everything! :). Good idea with the springs. Reduce a little tension! Thanks as always for watching Meat! Have a great saturday! :).
@dougsoderberg-uh9fw 18 күн бұрын
never been a fan of battery powered anything, my 30 year old air powered nailers have always done exactly what is required with no issues .
@FlynndoggWoodwork 16 күн бұрын
I hear you. Battery powered tools also seem to have a little less power than most corded tools. Thanks so much for watching Doug!
@karlriley1314 18 күн бұрын
I see you have the same problem that I have with the GLUBOT.
@FlynndoggWoodwork 18 күн бұрын
I'm glad I'm not the only one. I see them in action so much and I knew I couldn't be the only one having this problem! Thanks so much for watching Karl!
@timh7156 19 күн бұрын
🤣🤣🤣 Folding level! It should be obvious that something like that is useless. It’s hard enough finding a rigid level that’s accurate.
@FlynndoggWoodwork 19 күн бұрын
Totally agree! :). Thanks for watchign timh!
@heystarfish100 19 күн бұрын
Those roller supports used as an out feed support on your tablesaw are a disaster no matter who makes them. 😂
@FlynndoggWoodwork 19 күн бұрын
I'm glad to hear i'm not the only one having problems using them like that. Thanks so much for watching heystarfish!
@a9ball1 19 күн бұрын
I made my own from an old wooden rolling pin my wife didn't want.
@FlynndoggWoodwork 18 күн бұрын
@@a9ball1 what an excellent idea! Great thinking!
@davidshirk2024 19 күн бұрын
Brovo!
@FlynndoggWoodwork 19 күн бұрын
Thanks so much for watching David!
@nonfacebookuser5867 12 күн бұрын
LAMP
@FlynndoggWoodwork 11 күн бұрын
Thanks for watching nonfacebookuser! I've got you entered!
@Sly_Wolf_1 20 күн бұрын
Sorry but american cuisine sucks, Crow.. 🤔 Crow... 🤔 We brits eat humble pie much tastier 😂😂😂
@FlynndoggWoodwork 20 күн бұрын
Haha! Crow is probably a delicacy somewhere! :). THanks so much for watching Sly_Wolf!
@Sly_Wolf_1 20 күн бұрын
@@FlynndoggWoodwork Thank you for another great video, it's really great that you take the time to return to tools/items that after long term use don't float your boat or live up to expectations. Thank you.
@FlynndoggWoodwork 18 күн бұрын
@@Sly_Wolf_1 my pleasure thanks again!
Gufee.medalin
Рет қаралды 8 МЛН
Immersed
Рет қаралды 70 МЛН
Technology Connections
Рет қаралды 2,3 МЛН
Midlife Stockman
Рет қаралды 8 МЛН
Torque Test Channel
Рет қаралды 511 М.
Gufee.medalin
Рет қаралды 8 МЛН