SUZUKI DF250 ''hidden issue' Clogged fuel cooler'
Рет қаралды 45,988
4 жыл бұрынwww.captdaves.com - Jacksonville Florida Charter Fishing
WATCH 👀👀 • ACID WASHING OUTBOARD ...
#fuelproblems #nofuel #outboards
"JETTYWOLF LIVE" - 01/17/2020
A FOLLOW-UP TO MY VERY LAST VIDEO ON RYDLYME FLUSHING AND INTERNAL ANODE CHANGING ON MY SUZUKI 250 OUTBOARD MOTOR: • SUZUKI 250 CLEAN-OUT❗
NOW, IT'S TIME TO CHECK THE FUEL COOLER FOR ANY CLOGGING. AND TO SWAP OUT TO A BRAND NEW ONE.
NOT!!!!!!!!! FOR THE ''MECHANICALLY IMPAIRED'' TAKING ENTIRE VST-VAPOR SEPARATOR TANK OUT TO GET TO THE FUEL COOLER. BECAUSE ITS A REAL PAIN.
YES, ORIGINALLY IT TOOK 5 YEARS TO CLOG UP WITH SALT, AND DIRT FROM THE NASTY ST. JOHNS RIVER.
AND I'VE STOPPED USING THOSE SUZUKI FLUSH PORTS INSTEAD, RUN OUT MY SUZUKI 250 OUTBOARD IN A BARREL EACH TIME I GET BACK FROM A DAYS FISHING.
www.captdaves.com - St. Johns River / near-coastal waters sport fishing charters since 1996 full-time / 12 months a year 7 days a week.
VISIT MY AMAZON ''TOOLS OF THE TRADE'' PAGE AND ORDER YOUR OWN BARREL ""(I HAVE 2 SIZES LISTED) SO YOU CAN ADEQUATELY FLUSH YOUR OUTBOARD MOTOR, VIA RUNNING UP TO TEMP. HELP SUPPORT THIS KNOWLEDGE BASED VIDEOS ON MY CHANNEL: www.amazon.com/shop/captdaves...
LOOKS LIKE YOU'LL HAVE TO ADD YOUR OWN DRAIN, JUST DRILL AND ADD A AFTER-MARKET DRAIN PIPE AND CAP.
OTHER VIDEOS ON THIS SUBJECT HERE:
• ACID WASHING OUTBOARD ... - 1ST DESCALING
• SUZUKI OUTBOARD MAINTE... - SUZUKI MAINTENANCE VLOG
• OUTBOARD MOTOR FLUSHIN... - OUTBOARD FLUSH PORTS, DO NOT USE IF YOU RUN THE ST. JOHNS RIVER!
• SUZUKI Outboard $600 P... - $600 Power trim and tilt motor!
• MY SUZUKI OUTBOARD, ma... - MY SUZUKI OUTBOARD, maintenance schedule for 2020
any questions?? contact me by visiting my website and click ''CONTACT CAPT. DAVE''
;
Jacksonville Fishing, AND the dirty St. Johns River
@bjboothe8957 4 жыл бұрын
Thanks for the informative video about the fuel cooler. I run a 250SS on a bass boat in tidal water up here in VA, and during the summer time, I have similar problems as well with fuel vaporizing after a long run. There was a Suzuki bulletin where the fix was putting in a 350 low pressure fuel pump, but I haven't done it yet. Your solution seems better vice putting a band aide on it with a bigger fuel pump.
@CaptDavesSportfishing 4 жыл бұрын
I run a ''dirt river''.....NEVER EVER use that flushing ports on the motor!!!!!!! I only run in a barrel of fresh water up to temp, for 20 minutes every day.
@catfishstalkeroutdoorswith530 4 жыл бұрын
Thanks for the video!
@CaptDavesSportfishing 4 жыл бұрын
need a barrel to flush with???? www.amazon.com/shop/captdavessportfishingcharters SEE VIDEO DESCRIPTION FOR '''''''LINKS''''''' TO OTHER VIDEOS ON SUBJECT, AND BARRELS TO RUN OUT/FLUSH YOUR OUTBOARD MOTOR. DON'T USE THOSE FLUSH PORTS! JAX. FL. SPORT FISHING CHARTERS: www.captdaves.com - since 1996 full-time / 365!
@ericredford2614 Жыл бұрын
I appreciate you man thank you
@FishAholicTV 3 жыл бұрын
Hey Captain Dave this video was really cool and informative! So thanks for posting it! I have a 04 225df and was wondering what the meaning of the VST tank buzzing sound is when I turn the key before trying to start the engine...? When I first got the engine it never made that noise so now I’m scratching my head and when I tried to run it with the ear muffs before that noise occurred the engine started right up twice but wouldn’t piss. Any suggestions of any kind would help a ton. Thanks
@CaptDavesSportfishing 3 жыл бұрын
The buzzing is your fuel pump that round thing cylindrical next to your VST tank that's it pumping fuel from your fuel filters. I'm sure it's always done it and you just ended up just noticing it or something. I went through all this because the fuel cooler behind a VST tank was clogged with salt and Bud from The Wonderful river that I run up and down. Which isn't so wonderful its a dirt mixed with ocean Salt River. And after years of using that flushing on the front or the back of the motors it does not flush your engine properly at all. That's the reason fuel cooler clogged your fuel cooler really means a lot when it's a hundred degrees and your run hard and it's two hundred and something degrees under your kaleng on a hot summer day you turn the engine off you go to restart it runs for 30 seconds and then conks out because all your fuel gets vaporized. Don't ask me about the engineering part of it all I don't sort of totally get it but I'm not a Suzuki engineer over in Okydoky, Japan. The reason you're probably not saying the tattletail piss stream did you may not have enough water pressure or it's clogged you can run a fine wire up an error some heavy-duty monofilament sometimes little shells and stuff like that get stuck in there and keep it from pissing as they say
@durwinburdett5873 2 жыл бұрын
The peep hole also cleaned out. Water pick up clean also
@timothymcvay7286 4 жыл бұрын
Alright buddy where are the new videos at stay safe
@johnbocchino5301 Жыл бұрын
Great video. Thanks for putting this together. I have a 2018 DF200A outboard with about 160 hours. The engine runs in salt water in the north east. I boat the boat / engine in 2020 with 80 hours on it. I always use non ethanol fuel. I’m having an issue after the engine is running for a bit. It has a hard time starting. Starts fine with a cold start. Took the VST apart. Looks very clean. Engine is maintained per the manual. Would like to here your thoughts if you think the fuel cooler being blocked on the sea water side would cause this? Thanks again!
@CaptDavesSportfishing Жыл бұрын
NO my problem was in 100 degree Florida heat at first, then got worse. My motor had thousand plus plus hours and runs in absolute dirt water. plus I used that stupid flushing port versus a barrel, because a 250 has low water pick ups in the lower unit and cant use the muffs on it efficiantly. DO NOT EVER USE THOSE FLUSH PORTS.
@chuckmatt4662 4 жыл бұрын
Great video! Was your motor having issues when clogged? If so what was your motor doing?
@CaptDavesSportfishing 4 жыл бұрын
yes......not running!
@rogerjones1628 4 жыл бұрын
👍👍
@luisgarcia4128 Жыл бұрын
Pontchartrain LA It's where I go every weekend 👍🏽
@CaptDavesSportfishing Жыл бұрын
a little too far for me to do that every weekend. But it's where I'd RATHER be!!!!!!!!!
@philipbotha5583 3 жыл бұрын
Good Morning Dave….! Great vid thanks. I have another DF250 (2008 I believe) Serial Number starts 25001F-88…… I can get a parts motor starting 25002F-88….. Do you perhaps know if parts are interchangeable….? Particularly the tilt and trim. Mine still work,but has been corroded by salt from previous owner
@CaptDavesSportfishing 3 жыл бұрын
i know there's after market parts out there, like Sierra but if they don't work, i don't have time to screw around. days equal dollars for me, so i use OEM.
@riggo44able Жыл бұрын
Hey Captain Dave. I have spent a couple days working on that same engine. The fuel bulb was getting completely flat and it would shut down the engine with beeping. Computer says no active faults, but says it’s overheated 6 times. I removed the check ball in the tank, and replace the bulb and lines to the engine, so now it will run fine up to 5100 rpm’s. If I go 52 or 5300 it will start cutting out like it’s not getting enough fuel. No more beeping and engine coming to a stop like before, so it has gotten better. Do you think the fuel is vaporizing. Great video btw.
@CaptDavesSportfishing Жыл бұрын
Ya may want to check that good ole fuel cooler. or VST/ fuel pump. I'm no expert, just a shade tree mechanic / charter boat that looses $ if something happens and can't drop it off at a mechanic for 3 weeks.
@walldog1457 4 жыл бұрын
PROBABLY JUST TAKE IT TO A MECHANIC NEXT TIME, ARE YOU KIDDING ME, (YOU)PLEASE TELL US YOU DIDN'T HAVE A FEVER ..LOL THANKS FOR THE VIDS OVIEDO FL 😎
@CaptDavesSportfishing 4 жыл бұрын
orowock said the same thing....!!
@waynebert7357 11 ай бұрын
Capt Dave, Do you know if the fuel cooler is similar on the DF 150? My DF 150 does not pee when in the water, but pees great on the flush ports. I flushed it changed the thermostat, OP vlv, cleaned the oil pan cooler, and the electric unit cooler. Everything was full of sand, I bought the motor used was given the song and dance how great it was. I guess the next thing is the fuel cooler do you have any other suggestions before I attempt the fuel cooler? Thanks
@CaptDavesSportfishing 11 ай бұрын
sorry I had to have the mechanic tells me to change or check the fuel cooler that was behind by VST tank when mine was actually cutting off from fuel vaporizing before it ever got to the injectors. I don't know if that has anything to do with not having a indicator stream. I am not a engine mechanic. I'm one-hundred-percent shade tree.
@tertiuspretorius2045 3 жыл бұрын
Thanks for the video, just to confirm,I have to drill out to be able to clean,no other way thru the actual nozzle connections?I take it the fact that no water comes thru that its totally blocked
@CaptDavesSportfishing 3 жыл бұрын
If you take out your fuel cooler from behind your VST tank and you cannot blow through it. It's clogged!! Yes it's plugged with pressed in aluminum plugs I drilled my out. then ran a wire brush thru it with a drill. pipe cleaner type wire brush. then used JB Weld to re plug it up. re installed and Never had a stalling issue again, but Im in hot as hell Florida! Problem was in the Florida heat, under the cowling would get so hot, after a hard run. Then, Id get stalling, with no more starts for at least 2 hrs. Suzuki engineers used this to cool fuel off, the system is FLAWED! But thats a modern 4 stroke outboard for ya. Plus, NEVER, EVER, EVER, use flushing ports on motor!!!!!!! Flush and run in a barrel, up to temp. if you run in dirt shit water like I do.
@tertiuspretorius2045 3 жыл бұрын
@@CaptDavesSportfishing thank you for taking the time to reply,mine is definitly clogged then,will follow your advise here,i do have another issue unrelated with my Df140,if i may?Motor is rebuilt,still running her in,now onto 4 hours of the first 10, on 4200 rmp it drops to 300o rpm, and will stay there, i tapped back and re try to accelarate ,it goes to 400 rpm and drops again,the starts to search a bit, any idea?thanks in advance
@CaptDavesSportfishing 3 жыл бұрын
@@tertiuspretorius2045 INJECTORS?? sounds like it needs to run with the laptop plugged and software, with a real mechanic. The diagnostics software will tell the story.
@tertiuspretorius2045 3 жыл бұрын
@@CaptDavesSportfishing Thanks Mate ill keep you posted
@CaptDavesSportfishing 3 жыл бұрын
@@tertiuspretorius2045 GREAT!
@christiandrumr80 4 жыл бұрын
Are the ECM's on the Suzuki's water cooled? If so, could they get clogged? - - - Lake Ponchatrain, LA - right near my home town!
@CaptDavesSportfishing 4 жыл бұрын
no....FUEL COOLER (did you actually watch video???) can get clogged. NEVER EVER in nasty water use on board flush ports
@christiandrumr80 4 жыл бұрын
I did. I was wondering in addition to the fuel cooler if there was a water cooled ecm that could get clogged. I appreciate all of the videos you have done. I am making notes for my zuke.
@durwinburdett5873 2 жыл бұрын
Question. I have DF115 2002. Hardly any water shoots out the peep hole. New impeller
@CaptDavesSportfishing 2 жыл бұрын
FUEL COOLER has zero to do with water coming outa the pee hole. If it isn't running hot, don't worry about it. The pee hole isn't but indicator. Still could have junk in it unless it's been cleaned out all the way to the block, and that hole could be obstructed. a tiny shell will cause it. I am not a mechanic. Just a fishing guide keeping my stuff running.
@kevinmifsud4683 2 жыл бұрын
Hey hi with thermostat removed from place flushing the engine will water come out from top where thermostats seat in place????
@CaptDavesSportfishing 2 жыл бұрын
YEP....thats why those flushing ports are for shit! ALWAYS run motor up to temp, with flush muffs or in a barrel for complete flushing. Without up to temp, t-stats never open. IF YOU RUN IN DIRT WATER like I do, and use the flush ports on motor, give it 3 yrs and your fuel cooler can clog and you'll experience motor shutting down when it's 110 degrees in the FLORIDA summers after hard running and then anchoring up for hrs. I had it all happen to me......
@charlieeng2553 3 жыл бұрын
Can you tell me what diameter size was the cleaning brush you used? What type of material was the brush?
@CaptDavesSportfishing 3 жыл бұрын
no idea. It was a brass harbor freight brass ''pipe cleaner'' like brush. fit fine inside after drilling out plugs.
@charlieeng2553 3 жыл бұрын
@@CaptDavesSportfishing Thanks for the Harbor Frieght lead for the brush.
@andrewfalik2504 2 жыл бұрын
Does any hot water from the power head run through the cooler or is it only cooler water directly from the lower pickup?
@CaptDavesSportfishing 2 жыл бұрын
no no water doesn't come from any pick up, it comes from a hose routed from the back of the motor if I can remember before it goes in the block cooling passages.
@andrewfalik2504 2 жыл бұрын
@@CaptDavesSportfishing I have a 15 hp fuel injected Suzuki that has only 8 hrs on it. There is a hose directly connecting the fuel cooler to the P tube which results in cool water leaving the P tube. On idling with the ear muffs it starts right up and after a minute the engine block feels warm however the P,tube water is still cool. So is the warm water from the engine block shunted directly to the lower unit exhaust ?
@CaptDavesSportfishing 2 жыл бұрын
@@andrewfalik2504 well number 1 your 15hp is a far cry from a 250! You may not have a fuel cooler at all. And the piss stream is just a indicator of water flow, has zero to do with engine temp. The T-stats regulate all that. Yeah warm water exits the exhaust. Unless you're having issues with sut downs due to over heating don't over think it and consult a real Suzuki mechanic, in which I am not. I'm a fishing charter boat doing my own maintenance and work because I can't drop my boat off to sit for 2 weeks till the work is done like Willy Weekender can.
@adl2005 3 жыл бұрын
what will this do to the engine if it's blocked.
@CaptDavesSportfishing 3 жыл бұрын
ENGINE STALLS AND WON'T START
@andrewschoenfeldt5620 2 жыл бұрын
Just pick up a 45 gallon used food grade barrel $20 CAD cash tops
@CaptDavesSportfishing 2 жыл бұрын
don't need too. I have the perfect barrel right now. Been using it for years
@gerardhaubert8210 4 жыл бұрын
How do you prevent this problem?
@CaptDavesSportfishing 4 жыл бұрын
never ever use motor flush ports, when in shit water.
@trimmerslandscaping8260 2 жыл бұрын
Could this have anything to do with 2 cylinders not firing?
@CaptDavesSportfishing 2 жыл бұрын
Not at all. Its due to using that stupid flush port on the motor in nasty dirt saltwater, instead of running it out in a barrel full of clean fresh water.
@jodeco6147 10 ай бұрын
There just aren’t enough curse words for Suzuki repair 😂
@CaptDavesSportfishing 10 ай бұрын
ANY OUTBOARD....unless you're a trained mechanic. I'm a poor fishing guide!
@mikerudin7194 4 жыл бұрын
Hey Dave, Sorry for the bad end of your day, however willing to help you out and save some $$. Northern tool has hubs on standby for MUCH cheaper then your trailer repair place. Let me know if you would like my son and I to assist you. We are local fisherman and have probably watched most all of your 705 videos. As subscribed viewers we can bring our impact, grease and free labor. Let me know as it is Sunday morning and we are not fishing today...Would like to help.
@CaptDavesSportfishing 4 жыл бұрын
SUPER GREAT TALKIN......''TO LONG'' TO YA. I'LL TALK AT YA SOON, AGAIN. THANK YOU FOR EVERYTHING MIKE!
Fabiosa Animated
Рет қаралды 10 МЛН
Royal Yachting Association - RYA
Рет қаралды 398 М.
Boat Parts
Рет қаралды 201 М.
Team Marine Service
Рет қаралды 114 М.
Boat Buyer's Secret Weapon
Рет қаралды 641 М.