Suzuki GS850 Cafe Racer Build - Engine/Frame Modifications

Рет қаралды 78,840

2 жыл бұрын

Episode 2 of the GS850 build series! In this video I go through the process of refreshing the engine, carbs, frame and more! Dime City Cycles came through clutch with all the hard to find parts for this old Japanese motorcycle. If you have a vintage Honda, Suzuki, Yamaha they are your number one parts resource!
Also want to give a huge THANK YOU, to Trevor (@Ditstang) for doing an amazing job on the carb rebuild! He got them looking better than when they left the factory! He provides a lot of different motorcycle services (Specializes in BMW K Series). If you are in need of blasting, refinishing, powdercoating, etc. shoot him a message on Instagram or email at ditstang@hotmail.com to and let him know Bay City sent you!
Follow my page @baycityrestorations on Instagram to keep up with all of our custom motorcycle builds! #Suzuki #GS850 #Scrambler
Dime City Cycles Parts - www.dimecitycycles.com
Carb Rebuild Kits - www.dimecitycycles.com/carbur...
Brake Pads - www.dimecitycycles.com/brake-...
Alternator Gasket - www.dimecitycycles.com/gasket...
Clutch Case Gasket - www.dimecitycycles.com/gasket...
Valve Cover Gasket - www.dimecitycycles.com/gasket...
Spark Plugs - www.dimecitycycles.com/ngk-br...
Tuffside seat and frame hoop - www.tuffside.com
Custom Cafe Racer Parts - www.caferacerwebshop.com?ref=baycity
Engine Paint - amzn.to/3v1kQDR
Mechanic Toolset - amzn.to/3r6hbDh
Welder - amzn.to/3Ks6ItS
Mini Belt Sander - amzn.to/3jdIPtQ
Angle Grinder - amzn.to/3x6jf2a
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a BayCityRestorations Subscriber: / @baycityrestorations
→ Instagram: baycityrest...
→ My Channel Home Page: / @baycityrestorations
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*

Пікірлер: 93

@BayCityRestorations 2 жыл бұрын

Hey guys, thanks for watching! Below are links to parts/tools used in this video. Subscribe so you get notified for the next episode of the GS850 build! Dime City Cycles Parts - www.dimecitycycles.com Tuffside seat and frame hoop - www.tuffside.com Custom Cafe Racer Parts - www.caferacerwebshop.com?ref=baycity Engine Paint - amzn.to/3v1kQDR Mechanic Toolset - amzn.to/3r6hbDh Welder - amzn.to/3Ks6ItS Mini Belt Sander - amzn.to/3jdIPtQ Angle Grinder - amzn.to/3x6jf2a

@TheGuyThatsNotMe 2 жыл бұрын

Just picked up an 81' gs850 myself, and you've done everything I've wanted to do so far. Looks awesome!

@BayCityRestorations 2 жыл бұрын

Awesome man! I have not seen very many GS850’s that get customized. They are really solid bikes though 💪🏻

@mightysnafu Жыл бұрын

I had an 81 years back, always been one of my favorites, always fast and reliable.

@Byron-Baytepess Жыл бұрын

Ah ah ah, what memories! I had a GS850L the custon version, slightly modified, 7cm extension for the fork, all the chrome casings and a black gold glitter paint. Strong engine, very reliable and indestructible with good maintenance. What happiness! I can't wait to see the end. Good job!

@BayCityRestorations Жыл бұрын

Awesome man! I’ve had to take a break on this bike because I just moved but I hope to get it finished soon!

@niekization Жыл бұрын

I'm still waiting for the next episode

@raulplascencia4125 2 жыл бұрын

Excited to see the final product 💯

@bigbraintime8632 Жыл бұрын

Sir Y Have U Not uploaded any Videos since last 8 - 9 months ?? Are U Okkk ??

@BayCityRestorations Жыл бұрын

Appreciate you checking in man! I moved to a new place this year and life has just been very busy. Hope to get back on this bike very soon!

@toddpollock4552 Жыл бұрын

@@BayCityRestorationslooking forward to it…iv been off and on with the same bike as a project for awhile Myself

@corner.custom 2 жыл бұрын

Perfect work once again buddy, this will be another beauty!!

@BayCityRestorations 2 жыл бұрын

Thanks brother!

@notyourbrotherinlaw2092 2 жыл бұрын

very nice work so far folks - looking forward to seeing this finished. I'm a tuffside fan too - good choice.

@BayCityRestorations 2 жыл бұрын

Appreciate it! Tuffside makes a good seat!

@markhowlett8070 Жыл бұрын

Outstanding sir

@tristiansamonte3378 2 жыл бұрын

Can’t wait to see the full timeplase build.

@aleckmode1914 2 жыл бұрын

Bro this is so cool! Im looking to get myself one of these next week. You're giving me some ideas...

@BayCityRestorations 2 жыл бұрын

Not many people modify 850’s for some reason. They make a great base for a build!

@pdsn1961 2 жыл бұрын

Bravo, quel travail soigné !!!

@davidmackee8575 2 жыл бұрын

Nice job mate...👍👍

@mptorecon 3 ай бұрын

Great video!

@BayCityRestorations 3 ай бұрын

Thank you!

@piatsafilis 2 жыл бұрын

Very nice,greetings from Greece!

@BayCityRestorations 2 жыл бұрын

Thank you!

@ripntearslayer9101 2 жыл бұрын

Lol this is what I want to do with my 82 gs850. I think I want to do red on the frame, carbs and half moon covers tho. None-the-less, it's looking beautiful

@HaltomAutoworks 2 жыл бұрын

Looks great so far, thats quality work! I'm getting started on a 80' gs1000g. I also bought a tuffside seat, similar to yours but with the diamond stitching. I'll be following your build closely! I'm anxious to see how it turns out. I plan to post some videos of my build soon, not sure if I'll do 1 video or break into a few different videos

@BayCityRestorations 2 жыл бұрын

Awesome man! I will check it out! I’m moving at the moment so progress on the bike has been slow but I hope to get it finished up in a few months.

@lhawoekcreator Жыл бұрын

Motor clasic yang keren. Bertenaga dan gahar di jalan. I like it mkdifikasi dan renovasi.

@xXIFLOWXx Жыл бұрын

I just picked up a gs550 for $200 in pretty good shape let the project begin!

@Mo_G 2 жыл бұрын

Good job 👍

@BayCityRestorations 2 жыл бұрын

Thank you! Cheers!

@user-ul7fp4sr6d Жыл бұрын

Супер!!! Жду продолжения!!

@1pasota Жыл бұрын

Why would you leave the carburetor filter box instead of installing K&N cone filter, looks so much better, nice work anyway

@arjunmagar7292 Жыл бұрын

Wowooooo I like

@no-cap5309 2 жыл бұрын

It's been a while bro. Great job as always.

@BayCityRestorations 2 жыл бұрын

Yea man, life has been crazy. Getting ready to move to a new house next month so it’s been tough getting work done on the bike. Happy to be back in the garage for the time being!

@no-cap5309 2 жыл бұрын

@@BayCityRestorations Congrats with the new house bro.

@BayCityRestorations 2 жыл бұрын

I appreciate it! Was not easy buying in the current market.

@UnionJack0286 Жыл бұрын

Are you going to do any more videos on it soon? Love the build so far great work!

@BayCityRestorations Жыл бұрын

The bike is finished! Video should be live next week 😁

@xiaobeixu8359 Жыл бұрын

👍👍👍

2 жыл бұрын

Nice paint job I have to do the same 😁

@BayCityRestorations 2 жыл бұрын

Appreciate it!

@Infektedcustomz 2 жыл бұрын

🔥🔥🔥

@BayCityRestorations 2 жыл бұрын

Thank you!

@jamietedder7887 2 жыл бұрын

GS 850 from the salvage yard pay $250 I need carburetors still working on getting them but I've got it to run now towards run well at least where it's running and carburetors leaking but engine over all is fine had to do a little bit of body work beautiful bike I can't believe they junked it

@BayCityRestorations 2 жыл бұрын

Crazy sometimes what people will junk that still has plenty of potential.

@jerrybigrig Жыл бұрын

Did you get it running any better..??

@butts4653 Жыл бұрын

Any idea on timeline for the 3rd video? Just picked up a 79 and I'm dying to see where this goes.

@Schnurzpiepe789 Жыл бұрын

Sehr saubere Arbeit 👍

@jorgedanielenriquez2191 2 жыл бұрын

Belleza.

@BayCityRestorations 2 жыл бұрын

Thank you 🙏🏻

@corneliuscrewe677 Жыл бұрын

I had one of these in the late 80’s/early 90’s. Way too big for the skinny kid I was then. Damned thing had a buttload of power, I can only imagine what it would have been like lightened up.

@FIN43V3R 2 жыл бұрын

I don't know if you have yet bleeded the brakes, but if yes, did you bleed one caliber first and then the other?

@BayCityRestorations 2 жыл бұрын

I use a syringe and pump fluid up both brakes into the master and then do the bleeding process from there. This is usually the easiest way I’ve found to do it.

@onetwotimo Жыл бұрын

any update on this build? was really looking forward to seeing how the GS850 would turn out like.

@BayCityRestorations Жыл бұрын

It’s back together and running! Waiting to do the final paint work so I can put together the full build video for it.

@igorschirato5001 10 ай бұрын

Are the casings aluminum?

@claytonlivingston210 2 жыл бұрын

Do you have any issues with overheating after the paint and enamel?

@BayCityRestorations 2 жыл бұрын

No issues

@jerrybigrig Жыл бұрын

Anyone else have one of these with a drivability problem..mines a 1980 Gs 850..different style carbe,once you get up near 2,000 rpms it cuts out,,haven't been out in the unheated garage all winter to mess with it..any suggestions,,??

@F1FanCanuck Жыл бұрын

would love to see this bike finished…

@BayCityRestorations Жыл бұрын

The bike is 90% complete. Need to finish final paint work and then assemble everything so I can make the final video edit!

@F1FanCanuck Жыл бұрын

@@BayCityRestorations - fantastic - can’t wait! I’m in the middle of a brat conversion of my own GS850 and your bike is providing a great deal of inspiration.

@darthnobbin8098 7 ай бұрын

How has that rust oleum engine paint worked out? I’m thinking of using the same thing but I want to make sure it holds up

@BayCityRestorations 7 ай бұрын

It has held up great. Once the engine goes through a few heat cycles it really bakes on there. Also gas does not affect the finish at all. I once did an engine with VHT and the first bit of gas stripped the paint right off.

@darthnobbin8098 7 ай бұрын

Awesome, that’s good to hear!

@azcerbic 2 жыл бұрын

I watch your vids. Seen a couple of your bikes online (bit too much for me. how about a charitable part?) always impressed w/the craftsmenship & time you put in, especially the editing & vid work. Personally I'd like to see a different mod now. That & too many copycat BAD Cafe racer/chopped rear frame bikes FS now. Own a mint low mile barn queen CBX I'd never mod & a 38 Indian that just got restored + 3 other random bikes. Frame mod? Low rider/Bonneville type bike? I'd love to see a Bonneville speedster conversion. What impresses me is that you don't go the HI $ method of conversion' yet come out w/show quality work. Puris5s scoff @ using aerosol paint yet you turn out perfect finish bikes. I liked this bike vid as no seat got chopped + you didn't buy another bmw r/75 before I could. (yeah I'm mildly local RN) Love those bricks! Keep up the great vids no matter what style you choose👍👍👍

@BayCityRestorations 2 жыл бұрын

I’m always looking for the next deal! Might do another BMW or Honda next. Appreciate you watching!

@thomaszaragoza1978 2 жыл бұрын

Any idea when you'll have updates for this build?

@BayCityRestorations 2 жыл бұрын

Moving to a new shop at the moment. Hope to get back to this bike near the end of June.

@kylesgeller 2 жыл бұрын

I'm about 3 weeks into an 81 GS 850 Build. I wish you were NOT 2200 Miles away. id love to have that engine rebuild done!!! dang.. I'm out looking for a solid shop!

@BayCityRestorations 2 жыл бұрын

Dang! Haha goodluck with the build! 👊🏻

@kylesgeller 2 жыл бұрын

@@BayCityRestorations just so I'm in the know, what would you have charged a client for just the engine clean up and rebuild? just want too know what im getting into.

@BayCityRestorations 2 жыл бұрын

This job would have been around $1200. If you need to dive further into your internals for any issues than it will probably run you a bit more.

@jerrybigrig Жыл бұрын

@@kylesgeller what's wrong with your bike, why do you want to rebuild the engine,...

@geraldfitzgibbon7428 2 жыл бұрын

Did u have to get new carb mount rubber stubs? The cleaning up of carbs were something else. They look like new

@BayCityRestorations 2 жыл бұрын

It looked like the previous owner must have replaced those rubber mounts at some point. They were still very pliable and in great shape. After I cleaned them up they practically looked brand new.

@michaelbrinks8089 2 жыл бұрын

@@BayCityRestorations Is Trevor the same Trevor who used to have a shop called Shade Tree Mechanic in central Illinois?

@BayCityRestorations 2 жыл бұрын

I don't believe so. He has always worked out of his house. I don't think he ever owned an actual shop.

@michaelbrinks8089 2 жыл бұрын

I think It'd be kinda cool to build a carburetor air box out of clear polycarbonate. I'm wondering how close of shape it'd have to be to OEM to flow properly? I know they make glue specifically for polycarbonate & polycarbonate is the super tough plastic they make bullet proof glass out of.

@BayCityRestorations 2 жыл бұрын

I’ve been trying to think about what to do with it. I don’t want to do pod filters which is why I freshened up the original box.

@michaelbrinks8089 2 жыл бұрын

@@BayCityRestorations The black stock box looks fine but I think a tinted opaque air box would look cool. I wonder how much someone would charge you to make an opaque 3D printed air box? Just throwing some ideas out there . I like the way pod filters look but only if the bike runs good with them. Wanna get some pods & dynojet kit for my 85 Yamaha JX700 but told by many it'll never run as good, compared to stock air box. Others say it'll be faster off the line and/or top speed but sputter in spots throughout mid range. If I knew it wouldn't be terribly bad in mid range/only slight sputter in a couple spots, I might still get some pods. Just hate to spend $200 only to switch back to the stock air box. Also heard side winds on a windy day will cause issues.

@azcerbic 2 жыл бұрын

brilliant idea!

@ramapopbandung847 Жыл бұрын

No no no