Just a little drop on the GSX8R 🙃 new clutch lever ordered and will be installed. Get entered to win at yammienoob.co - time is running out!

Its a fact Yammie is just as clumsy as all of us 🤣 The bump or two from the drop just gives it character. Love the videos man

11:07 seeing that drop was like a jumpscare to me, felt like I dropped my own bike 🤣

11:05 oh maaaaaaan. This is why I have OCD about my kickstand. Every single time: push it all the way - get off the bike - push it again - pull the bike back a bit just in case (optionally: repeat the steps 3 more times, optionally 2: don't get off the bike at all)

Respect for not cutting that drop out of the video 🙂‍↔️

12:03 See everyone? Proof that, regardless of your experience, everyone makes mistakes. It's ok to make mistakes, as long as you learn from them.

Ohhhh nooooo... I felt that right through the heart. I feel for you on that one.

that mic on the bike is spiky as hell

Much respect for leaving the drop in the vid

Thank you much for moddin my bike yam. I just put tires, chain n sprockets, grips, painted the wheels, adjusted the valves, n rebuilt the carbs on my katana. I had to put a new pipe on it too. So Im glad I don't have to put all that on this one.

Got my 1st bike 2 months ago and dropped it for the 1st time today. Had it up on a rear stand changing the oil, finished and lowered the bike and forgot to put the kickstand back down 😅

I grew up in Ohio riding dirt bikes and have since taken MSF BRC and ARC courses, both California superbike school and Yamaha Campions school track days, and I STILL get nervous on technical roads that I know I have the skills for. What you experience is common to all rides and those of us humble enough to admit it understand that we learn and grow from getting out of our comfort zone. Great job, and I hope you had a blast!

Man, that exhaust tip looks so freakin cool.

2WHeels did the flash on my R7 for a full Akro race system and a Yoshimura airbox and the bike came to life, pulls nicely all the way to 100MPH now.🤘😎🏍

A long Allen wrench with a ball head does the trick on that bolt. Also, you can do this by only removing the bottom right plastic.

From now on I'll be triple checking the kickstand on my Streetfighter V4S 😮

Fired up my 1976 honda super sport in gear and it took off down the driveway and thankfully had a nap on my lawn.

I would imagine they recommend an aftermarket style air filter rather than "modding" an OEM one no?

That's why you should ALWAYS turn the handlebars all the way to one side, and pull back on them, before assuming the bike won't roll when it's in neutral. Granted the kickstand is a complicated device that requires decades of experience to operate properly.

Hey Yammie - great videos... Please tell your followers that when changing the O2 sensor over to the new pipe, NEVER touch the sensor with your fingers, or anything. Skin oils (invisible stuff) will burn on the sensor causing incorrect values being sent to the ECU, and could cause running issues. We always install new sensors if we suspect the owner has done a DIY job, and held the sensor in their bare hand. I always hold a sensor in a new microfibre, until it's tightened in.

Since I'm pretending to own a Suzuki GSX 8S (I'm not even kidding) this video has been very useful to watch. (My 22 year old SV650 is well past it's best so I'm imagining that I've replaced it with an 8S). I was thinking that the 8S just needed to sound better and produce a bit more power and torque to completely sort it and then I found this video. I can't wait to fire my new Suzuki up and take it for a ride! Yehaaa!!! With it's mods it now goes and sounds great!. OK, it happens to the best of us, and it happened to me too but making us wait to hear how good it sounds and then putting this video out with terrible sound quality has just contributed to my mental health problems. .

One thing I’ve noticed with every bike I’ve owned, no matter how careful you are you’re GOING to drop it atleast once😂

Bro, I can't believe you dropped my bike :). Exhaust sounds awesome.

almost did this exact same drop today, on the gsx 8r ... i did the akraprovic exhaust, airbox mod and 2wheeldyno ecu mod. its perfect.

THANK YOU for showing yourself dropping that bike. It happens to all of us and we can't be scared of it. You can't let it spoil the fun once you get it back on two either!! I love my Ninja 300. I've dropped it twice. I've had it for 2.5 seasons now and put 6,300 miles on. I felt terrible, and then tried my best to ride on like I didn't feel like a guilty sack of shit for scratching the fairings. Gotta' get over that and see that the thrill and happiness is still there.

wipe the header down with alcohol to remove fingerprints before first start up. I wiped mine down with wd40 after the alcohol and it turned out a nice golden color. can only see a few inches of it on the 8r tho lol

every new bike gets blessed sooner or later

Current dream bike for me! Just don't change the color! That yellow is perfect

The bike looks insane, sounds insane as well🔥🔥

I dropped my SV650X yesterday, trying to inch forward to have visibility when entering a busy main street...this makes me feel better 😁

Suzy got sick of the boys' clubhouse talk 😂

Crazy how far we have come in audio quality!

It happens.

OMG .. I totally did that exact thing at a gas station with my 8R! Wow! That kickstand spring really needs to be a bit beefier.

Gorgeous bike!

Out of all these cross plane parallel twins the TRX 850 with pipes still sounds the best.

Well I bought a yellow GSX8R did the same exact thing. Broke the clutch lever and it has the exact same marks on my bike. BTW the Suzuki levers are awesome!

The manufacturer that allows for easy modification wins, the manufacturer that makes it difficult won’t sell motorcycles. End of conversation. The best bikes are built like legos.

Great bike think I like the Naked 8S version better .

Happy someone put a exhaust install video for this bike. I like to do some research before changing parts on any vehicle. I tried putting my akropovic exhaust on my 8r the other day but stopped when i thought i had to take the radiator off, i can do it but it was cloudy and and might have rained and i have to do it outside happy i might not have take that radiator off now

Fair play to keeping the drop in the edit :-) Have the GSX-8R in mind for my next bike either end of year or start of next. Ticks all my boxes apart from the exhaust so totally looking to replace exhaust so thanks for the vid.

wont lie that exhaust might have made want this over a mt07/r7 😅

I'm not a sport bike guy, but that Leo Vince system gives it a nice bark.

absolutely ! I just dropped my Busa about the exact same way you dropped the give away bike.

Hey Papa Yam, this young squid got his first bike its a Honda SP125, I am from India by the way. Looking forward to use more of your videos to improve my skills . WOO Yammie Noob is my first teacher

I love how he said that he despises working on fully faired overly complicated bikes, but he always is talking about how all the new bikes with new tech. are the best. 🤔

Crash protection first > any other mods, now all we can do is laugh about it, but the fairings didnt crack, thats a good one

I dumped my H2 the 2nd week I owned it trying to park it facing forward (like my Goldwing, that has a reverse gear !!!) -Had to holler at a neighbor to lift her up as it had no bump's installed yet

I rode down to Ski shores down those roads yesterday on my GSX-8R!

Didn't see any anti-seize used. Where to buy all these cool parts? Mic drop! Glad you got that out of the way..😬

I want an 8R but I don't want to go through all this effort. I'll think I'll get mine with the optional arrow exhaust and call it a day. I'm on a GSR 750 now, which is my first bike, but I need the extra confidence the 8R gives me.

Slippin' Brother.

Brilliant honest video dude❤

Yes well, as a car mechanic, I can tell you that European car manufacturers really don't want people fixing their cars either... what they want is for it to be more cost effective to buy a brand new car after 5 years and not fix the old one! question though, if I were to have an electric 3/8's ratchet, and the bits to fit the bolt head, would it physically fit in the gap? (personally I would still drain the radiator, remove at least one of the hoses, and push the radiator out of the way (after I've wrapped cardboard around it) another thing I would do slightly different, if there is no plug and the wires are long enough, is wind the O2 sensor into the collector before putting the collector on, I'd nip it up in place though. can I suggest you emphasize having everything together and loosely bolted, so it can be in line perfectly before tightening any of the bolts? and a paint pen on the bolt heads & what it is bolted to, so a quick glance can tell you if it ever tries to back out, as well as, knowing for sure that it is tight without having to go back and spanner check it when you finish... not just to look professional, but for your own peace of mind, and to know if someone else has messed with it after you have! A cheap loot that will be of great help... a door trim removing tool, trust me it's very versatile, not just for doors, but any plastic clips, popping spark plug leads off the plug, small hoses off pipes and separating the mesh from the air filter without causing any damage. it will quickly become one of your favourite tools! the mesh on the end of the pipe whistles...

I'll take that bike now that you dropped it from the kickstand. It'll match my 22 ninja 650 haha.

Wow, you can't give a scuffed bike away. I'll be glad to come get it. Just send a message😂

Dropped mine and broke the clutch lever too, I seized the opportunity and refer to the clutch lever as a "custom shorty lever" now haha

Forgive me for saying this, but American engineering is born out of Disneyland and real motorcycling engineering is born out of the efforts of men like Allen Millyard in garden sheds. This is in no way an indictment of Harley Davidson Motorcycles or their twin breastfed affiliates. Bless you, Yammy Noob

While it looks like a pain, it's still very much doable. I also didn't like removing the fairing pins when i added my charging port on mine. 😂😂

If I would do the airbox stage2 mod & new airfilter, does the bike need to be tuned/flashed?

While I know the microphones on action cameras are pretty crap, it doesn't change the fact I can still hear "tonal noises" in the LV exhaust. I can say......I really don't like it. The Akra and M4 have better tone. The LV seems to be emitting some after-effect noises that have to do with that turn-out tip and the honeycomb screen on that tip. 2WDW does fantastic ECU work. Probably one of the best. VCyclenut also has a lot of experience in tuning and has great numbers with the Akra system, with the addition of TST velocity stacks.

Other day other yam video

Love that bike, wish I could win but..Guess I'll just have too buy it when I don't win. Either way, keep doin what ya doin. Great job..well minus the oops.

As expected it made the bike a whole lot smoother and a bit faster too. Emissions stuff man..

I definitely didnt use a similar drop as an excuse to cut the bent section out of the lever and polish it to look somewhat like an intentional shorty.

It's loud, but it doesn't sound good at all. Sounds straight piped

I have a yellow Honda Fury this would be awesome to have

Thank you for showing how to do this stuff. I'm following along.

Being a Suzuki I'm really surprised it started after that drop. 😂 Usually have to pull out a paper clip 📎. Iykyk

My Aprilia was a tight fit to get that middle bolt also. I feel ya.

I've ahd 3 bikes in my 14 years of owning a license do ride motorcycles (sidenote, I never had any other license except big bikes so no mopeds no 125 cc nothing). And I've never ever dropped one. Not a single time. I've crashed but not dropped one. Great vid, next time double check where you put that thing Yammie NOOB xD

Is that a giveaway bike that took a tumble lol. It happens bro, no sweat

Sounds a lot better

Sounds great! How long it take to install the exhaust?

Now that is much much better. Makes me want one now 😅😅

There was a guy on KZfaq that upgraded his with a different exhaust and put it on the dyno and got 86hp.

11:07 I suddenly want the bike more now

Oh gawd, my OCD at 4:10 . Wipe it down man , dirt is extra weight. ;)

I felt that drop in my soul, a few months ago i was going through a low speed roundabout in first gear and my bike stalled and just came to a dead stop but my body didnt, dropped the bike infront of a bunch of people smh , it does happen to the best of us

I just don’t wanna hear a bike making under 100 hp making a buncha gotdamn noise. It’s like putting samurai armor on a gerbil.

How do you pass emissions inspection

Quick shifter smooths a lot after oil change. It did on the V Strom 800

Just had that happen to me. Thankfully for my bike, my dads car was right next to it. Not thankfully for my dads car, it now has a dent and some scratches 😂 (it's got issues and hasn't been driven in a few months so it's all good)

The bike look so cool.

Ever think about change the handle bars to a more aggressive gsxr6-750, 1000. Style?

Actually sounds good

Hey guys forgive me if im being totally dumb, im new to the whole bike thing, but i was wondering can you just put a slip on exhaust on the gsx8r for a better sound or do you have to change the full exhaust?

my Gen 3 Busa FeLL because of too easy/soft Kick-Stand as it doesn't come with a Spring ... we don't get the feedback if it's Locked or has moved an inch or 2 away from its locked position in which the bike can be safely parked without danger of falling. If you mistakenly touch the stand with foot/feet while moving the bike forward or backward during parking, the bike will invariably fall. It's a known issue with Suzuki ... at least newer models... so, confirm if the stand is locked before leaving or resting the bike on it.

I'm pretty sure a 1/4 in drive lowpro ratchet with hex bit would work

Yam dang the gsx8

Sounds like a free set of asv levers to whomever may win this bike

Toce looks & sounds better Imo

You are wrong, they are designed by computer assembled and put in in one piece same with car's and the only way to get to some bolts is by removing motor gearbox and front end in one piece on a hoist

I'm told the akropivic exhaust is plug n play and no need to flash the ECU 🤔

I need this exhaust for mine.

Been waiting for this! I hope i win this beautiful bike but congrats to whoever wins it!

Maybe it was edited out, but did you reinstall the exhaust pipe gasket?

Just from the video it looks like it has way more pep than the MT07 going to higher speeds.

Facebook marketplace when the winner decides to sell this one…. Was dropped once by “the previous owner” 😂

I have the same bike, you have to really push kick stand out. It needs help all the way. I lubed it and it really didn’t help.