This video describes how to remove and block off the oil jection on a Suzuki LT-A50 LTA50 kids quad.
Пікірлер: 73
@5027bryan2 жыл бұрын
This is a great video! Very detailed and descriptive. It was exactly what I was looking for and very helpful. Again great job alot of the videos on KZfaq are just horrible with these types of videos. Some I've watched I honestly felt like I knew less than I did before watching 😂 liked and subscribed!
@mrmoose70494 жыл бұрын
Thanks for making this video it helped me out tremendously.
@quadjunkie0074 жыл бұрын
Your welcome I'm glad I could help.
@HorsepowerHouse4 жыл бұрын
Anyone know of any aftermarket bodywork for the 2002-2005 LTA50? I have been searching for days and no one offers it. How ridiculous. It's OEM only and a million dollars if all you want to do is install all new body and fender and hood and whatnot. Just ridiculous. And stuff for the KFX50 is even more expensive. Maier didn't have anything either. Anyone know of anything? Maybe something for a Chinese mini quad that will bolt right on? I need the footwell body and the complete frame cover bodywork. Can't find it anywhere other then OEM. :/
@juanmolina64 жыл бұрын
Hello I have a 04 Suzuki 50 quadsport and doesn’t turn on what do you think could be I have a nice spark
@nikdipetta2 жыл бұрын
Hey you never said where you got that airfilter adapter!?
@theMADox892 жыл бұрын
Hello, great video. I'm working on my buddies quad whom he bought from some guy. It looks like the original person also did this but I'm having issues getting this thing running. My buddy said he was riding this thing before but now it won't run. I opened up the carb and the idle screw is shaved down and missing the spring. Is there something I'm not aware of or is this commonly done?
@quadjunkie0072 жыл бұрын
As far as the idle screw, it shouldn't be shaved down; it should be just the stock screw with spring all oem parts, no Chinese parts or carburetor they won't ever run right. The oil mod is a personal preference. I am already mixing gas, so for me, it made it easier to mix one for all quads. Plus, you never worry about the injection getting clogging.
@3DJunkie5 жыл бұрын
good video however no need to go to all that work just block the pipe up and of course then premix at 40/1 mix as i have done that for 20 years on my track LT 50,s and LTA 50,s
@quadjunkie0075 жыл бұрын
OCD
@_.southern_cali_rc_59665 жыл бұрын
What size jets are you running in yours right now I just got a 90 lt50 and I want to eliminate the oil injection system to run 40:1 ?
@quadjunkie0074 жыл бұрын
@@_.southern_cali_rc_5966 90 on the main jet stock I think on the pilot. Although I think I could go up a size or so on the pilot idles fine once started but must give it gas in order to start it.
@philippebattesti16 жыл бұрын
do you have change the jetpilot carb to compensate the leaner air / fuel mixture with the pre-mix?
@quadjunkie0075 жыл бұрын
Yes the I had to re jet it and go up pretty big on the main jet.
@hansgruber65434 жыл бұрын
What jets did you end up using and where did you get them from? Having a hard time finding bigger jets
@nikdipetta2 жыл бұрын
@@quadjunkie007 Yeah what jets did you go with
@davidg37886 жыл бұрын
Hi Robert, on the pull start housing is there a hose connected to it? I know a brake line screws in it but was wondering if there is a hose as well. Thanks in advance.
@quadjunkie0075 жыл бұрын
Yes there is the hose coming from the oil tank reservoir going into the pump to push it into the carburetor and get sucked into the cylinder. I blocked the intake off going into the pump and removed the reservoir.
@HorsepowerHouse4 жыл бұрын
at 1:35, how do you remove that black round piece? I have tried everything including a Shop-Vac, and it will not come out. What's the trick???
@quadjunkie0074 жыл бұрын
I don't quite remember what the trick was o did it awhile ago. Needle nose pliers. It looks like it's just sitting in there from what I can tell.
@HorsepowerHouse4 жыл бұрын
@@quadjunkie007 Negative. It won't come out.
@quadjunkie0074 жыл бұрын
I think I just lifted straight up with some small needle nose pliers. I remember it slipping down a couple of times and starting over. It's a tight fit. I see there is a notch in the side of the black plastic but I don't think it has to align up with anything. I can look tomorrow closer at it. But very small tip needle nose pliers and pull up. Try turning the motor over and rotating it around. Make sure it's in the off position though.
@HorsepowerHouse4 жыл бұрын
@@quadjunkie007 The pump is dead. It hasn't worked in months. Which is why I want to remove it.
@quadjunkie0074 жыл бұрын
@horsepower house your part of the big dogs views program. Nice job.
@5dtrevino5 жыл бұрын
Where did you get the aluminum air /carburetor filter? Mine is smoking a lot of white smoke and ozzing oil out of muffler and oil injection has been removed? Any suggestions
@quadjunkie0075 жыл бұрын
Sounds like it could be time for a rebuild or it's just oil build up and a oil Saturated exhaust system. I bought the package from CT racing it came with the pipe filter piston and aluminum round thing that attaches to your carburetor for the K&N air filter to fit. You also have to send a head in to have it milled it's an expensive package but there's quite a bit of difference between that and stock. Plus you need to remove any of the restrict or plates that were put in by the factory if it hasn't been done already in the muffler and on the intake.
@kimber8414 жыл бұрын
I am doing this on my sons LT80 and I have read that the petcock filter/screen is so fine that it can prevent the oil from flowing through in the correct ratio. I am assuming that this isn’t true since you haven’t had trouble?
@quadjunkie0074 жыл бұрын
Nope 32:1 ratio same as my 250R
@davidg37886 жыл бұрын
That hose thats connected to that small inch or two steel cylinder, does that connect to anything or is it some kind of overflow or breather? I just bought one used and its spitting out some kind of gear oil and its not currently connected to anything. On your video it seems as if the little hose is leading to the pull start. Thanks in advance.
@quadjunkie0076 жыл бұрын
That's the oil injection hose. There was a hose coming from the oil tank to the injector pump that's what I removed.
@davidg37886 жыл бұрын
Thanks for the quick response Robert. The hose that i am referring to is the very small one that is connected to the silver looking cylinder and on your video the hose seems to lead to the pull start. At .49 on your video you almost zoom in on it before you head back to the table.
@davidg37886 жыл бұрын
At .49 on video its on the top left side of the shot.
@quadjunkie0075 жыл бұрын
That is the crank case breather tube connected to that silver cylinder.
@HorsepowerHouse4 жыл бұрын
Anyone find a good alternative to installing a better air filter on this model? I have been searching online for hours and finding nothing. I just want to install a better air filter and not use this stupid plastic air intake setup. Anyone? Anyone?.... Not seeking to pay a million dollars for the CT Racing one either. Surely there is an alternative... Same for exhaust upgrade. Anything out there other than the million-dollar CT Racing one?
@fin-addictyaker65736 жыл бұрын
Hey man, any other vids on the LT-A50? Buddy of mine gave me a 2003 that won’t start. Already have a new carburetor and one foam filter element on the way. I also plan to do what you’ve shown in this video.
@coronadoegsi6 жыл бұрын
Are you planning on de-restrict that little beast :)?
@quadjunkie0076 жыл бұрын
Yes I changed the jets out on the carb.
@quadjunkie0075 жыл бұрын
@@coronadoegsi All the factory restrictions have already been removed along with re jetting aftermarket racing pipe K&N filter and piston and milled the head.
@juanmolina64 жыл бұрын
And what kind mix ratio are you recommend me to do it when I have my oil pump block
@quadjunkie0074 жыл бұрын
I run 32 to 1 ratio same as my trx250r so I only have to mix one fuel
@pickleberryyum4043 жыл бұрын
What size jet did you change the lt50 in order to run 32:1?
@BjorkOffroad5 жыл бұрын
After having this done for awhile, have you seen anything negative from it?
@quadjunkie0075 жыл бұрын
Nope it runs like a champ.
@colonialroofingofnorthcaro4414 жыл бұрын
What ratio are you mixing for the guard now, tks
@quadjunkie0074 жыл бұрын
32:1 same as my trx250R
@hsdthast91843 жыл бұрын
Good 👍
@santiagopacingonzalez80144 жыл бұрын
One question, in a lt50 there it goes 2 strock oil?
@quadjunkie0074 жыл бұрын
Yes it is a 2 stroke engine
@josephhursman33745 жыл бұрын
Doesn’t this bike lube the bottom end and top end... how does the bottom end get lubed if you remove?
@quadjunkie0075 жыл бұрын
This is for the oil injection on mixing the gas with the oil and sending it to the cylinder to get burnt and lubricate the cylinder walls with the gas. The bottom end has transmission fluid in it that sloshes around when the crank spins while running. There is a fill hole on the side of the case for the transmission fluid and a drain plug on the bottom. Hope this helps.
@christiantillman843 жыл бұрын
I’m wondering that myself, the transmission fluid is for the transmission not the bottom end/main crank shaft bearing. On regular 2 strokes, a small part of the oil air mix goes below the piston and lubes the bottom end when running. Since this motor isn’t made to allow that small seep,(assuming since it is plumbed to have that injection oil go there and to lube the cylinder rings) I feel that by blocking the oil injection off will eventually lock up your main crank.
@rumplestiltskin10562 жыл бұрын
@@christiantillman84 Fuel goes into the crankcase first and up through the transfer ports to the top of the cylinder. When you use fuel/oil mix it will lubricate the bottom end of crankcase first.
@POOL_EXCAVATIONS3 жыл бұрын
So you just take out what you can and block it off and that's it?
@quadjunkie0073 жыл бұрын
Pretty much I wasn't going to split the case to do it wasn't needed
@POOL_EXCAVATIONS3 жыл бұрын
@@quadjunkie007 no problems so far?
@quadjunkie0073 жыл бұрын
@@POOL_EXCAVATIONS nope hade the quad for about 8 years
@emoneybagsthedon3 жыл бұрын
@@quadjunkie007 does it run any better?
@pickleberryyum4043 жыл бұрын
Lt50 is the same engine as the jr50 right?
@quadjunkie0073 жыл бұрын
Yes I do believe so
@steve59125 жыл бұрын
I keep my oil injection and I put so much oil in the tank and itll cruise at 30mph all day with me and I weigh 250lb. My top ends last about 150 hours at almost max rpm for hours a day. Itll smoke out the whole street everytime I go by but at least my top ends last.
@quadjunkie0075 жыл бұрын
I don't ride it just my kids do and it does just fine pre mixed.
@steve59125 жыл бұрын
@@quadjunkie007 I beat the piss out of mine and nothing happens lol
@jeffglauser41083 жыл бұрын
Steve, I don't know if you'll see this but I have a dumb question. Why would keeping the oil injection tank and everything allow you, a heavier guy, to ride around all day? How does it help?
@steve59123 жыл бұрын
@@jeffglauser4108 Because me being a heavier guy puts a ton more stress on the little engine which means more heat and the more oil you can get the longer the engine is going to last because it’ll have a lot less heat with more oil so less friction
@jeffglauser41083 жыл бұрын
@@steve5912 and premix wouldn't provide as much oil as the injector?
@mikeheiss65004 жыл бұрын
We use that benol for bikes
@Brian-gt4wz2 жыл бұрын
I use benol for everything 2t I own.
@dcsymbols44505 жыл бұрын
Why block it off?.
@quadjunkie0075 жыл бұрын
I am pre mixing my gas and oil together and no longer need the oil injection system. This way I can control how much oil is being used. The oil injection system run extremely rich and if they ever get clogged up you'll burn up the motor this solves that issue. I have 3 quads it allows me to mix one set of gas and use it across all 3.