Suzuki RF 900 Valves Clearance Check

Рет қаралды 10,939

Adikxx

5 жыл бұрын

RF 900 Tappet Clearance check
Link to part 1 video below:
• Suzuki RF 900 Carburet...

Пікірлер: 24

@brentsmith5647 Жыл бұрын

Love watching the gentlemen do his thing👀♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@fidibus67 4 ай бұрын

Ich hatte 1995 eine RF600 danach eine TL1000S, ich hatte immer die RF900 bewundert und 2024 suche ich eine. Danke für das Video. Thank for Video👍 from Germany! Suzuki vorever

@md123420 5 жыл бұрын

I finally got my 94 rf600r running. The Vance and Hines ECU was on some setting so I put it on the low performance setting and it came to life. Just gotta clean the Jets and it'll be good.

@brentsmith5647 Жыл бұрын

Brilliant man 👀♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@dimonmakas3041 5 жыл бұрын

Спасибо за видео,у меня тоже suzuki rf900r ,стали постукивать клапана,буду регулировать

@brentsmith5647 Жыл бұрын

Fantastic video thank you👀♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@brentsmith5647 Жыл бұрын

Brilliant video thank u 👀♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@pauleast6291 2 жыл бұрын

Thank really usefull

@pauleast6291 2 жыл бұрын

Cause finding informations about the rf900r is very rare indeed plus you explain everything really well

@charles-336 3 жыл бұрын

In the user manual for the rf900r (1997) it lists 5 or so different types of valves. (E-03, E-04) etc.. how do I identify which valves are installed on my bike?

@robertlewis3778 Жыл бұрын

I know this is an older post but your work on the RF has been great. I'm just in the midst of checking my valves only to find there is no T mark (or anything at all) on the part under the cover...and there are no notches at all on the ends of the camshafts! So I've turned to what I think would be the T position and both cams are facing away from each other as per the manual but how can I check if this is correct?

@Adikxx Жыл бұрын

If you have no marks on the rotor perhaps you have aftermarket 5 degree ignition advancer. It's very strange though that you have no marks on camshafts(unless you have gsxr cams and somebody machined them off). Either wau if you want to check valve clearance without any marks just rotate the crank to have cam lobes pointing up(vertically) and measure the clearance. Once you measured all clearances for valves which had cam lobes poiting up again rotate the crank so remaining lobes point vertically and measure those. It's a shortcut way but it's still good.

@robertlewis3778 Жыл бұрын

@@Adikxx maybe..it's a bit of a mystery machine, bought cheap with unknown history as a project. Slowly getting through the little jobs to get it up and running again. From cam positions alone and the rotor being in what would be the T position all seems pretty good. Only trouble is I dropped one of the rubber rocker cover washers down the timing chain hole in the middle so I've got to locate that now