Replacing the brake shoes on 2009 SX4 M8 bolt to remove the drum.
Пікірлер: 99
@derickpearson10785 ай бұрын
One of the best Mechanics on here. He always gives nice clear instructions and good quality video. It is a pity he did not do more videos. He would be well worth paying and he gives straight forward instructions and is very acceptable. Full Marks and well done for all that I have seen. Having been in the trade for 50 plus years it is a pleasure to see such a good man doing a good job.
@locolobo18 жыл бұрын
Good video. Good camera work. Only problem is, I don't have three hands like you do. LOL
@Replevideo5 жыл бұрын
Excellent video, and just what I was looking for. I am intending to replace the shoes on my Suzuki Wagon-R, which I think will be much the same. Particularly I was interested in the self adjusters and how to reset them. Only one thing, I think I will clean the crap out of the brakes before re-assembly with brake cleaner. I also did not know about the screw holes for extracting the drum, so that will save me a lot of head scratching.
@Replevideo5 жыл бұрын
One added tip. Wrap some cloth round the base of the master cylinder reservoir. When you push the brake cylinder pistons back in it may force some brake fluid out of the reservoir, and there's no better paint stripper than brake fluid. Don't get it on your bodywork, and if you do, wash it off immediately with soapy water.
@JohnHenryEdenUSA10 жыл бұрын
Thanks this was helpful, helped me with a 2004 Suzuki Aerio
@The1PatSmith5 жыл бұрын
Very helpful, thank you, and happy 2019 to you from NZ.
@ivojara7 жыл бұрын
Hahaha, you are the perfect mechanic, I wish I had three hands like you... :) btw, thanks, excellent video.
@stevelong30073 жыл бұрын
Going to do my Suzuki swift tomorrow .. Thanks .Great video
@piznigley7 жыл бұрын
Great Video Thanks. Really Helped Me
@tommaestro73563 жыл бұрын
It's very helpful and nice video!
@Naomi-ge1qf7 жыл бұрын
how or what do i do if i got a little pin hole in the brake cylinder seal or cap whatever its called and can i replace it do i buy a new cylinder all together or can i buy just the little rubber seals and are they hard to replace
@Norsology8 жыл бұрын
Nice video. Same brake drum design used on Suzuki Ignis I (FH) 2000-2005.
@Replevideo5 жыл бұрын
Thanks for your comment. I have a Wagon-R and your comment makes me think my brakes will be same as in this video.
@jingguriktoink6117 Жыл бұрын
What is the size for 2 bolts you use to take off the cover
@whatudoingrandad2294 жыл бұрын
Great video and a big help thanks
@jaykay26577 жыл бұрын
Thanks . You are a life saver. keep on !!!
@keyfir6523 жыл бұрын
Does the rear side suzuki swift 4x4 have abs sensors.
@lastisfirst56183 жыл бұрын
Why do you remove the not on the back side ? Please explain the purpose.
@MrBoricuahastalamuer10 жыл бұрын
Thanks !!! this video helped me for Suzuki Aerio 2006
@marshalldestro5 жыл бұрын
Hey, i did the same thing with my 2006 aerio also, but now my hand brake is loose. Did you have that problem also? if so, how did you fix it? thanks
@agrobotics4 жыл бұрын
@@marshalldestro did you figure out the loose hand brake issue?
@MiguelFernandez-cx2ym6 жыл бұрын
Why do you have to make the Emergency brake cable lose
@tessiehuskey13 жыл бұрын
Why didn’t you adjust the spring loaded adjuster so the clearance between the drum face and the shoe is the right distance
@balajicartechinfo58364 жыл бұрын
Very very nice explained vediou Tq sar.
@Rustomhavewalla3 жыл бұрын
Very good video. Learnt a lot. Thank you. Recently, when my mechanic opened the drum, we found that one pin that goes through the centre of the brakeshoe was missing. It comes at 3:02 in the above video. Was that dangerous? What could have happened? After placing a new pin and clip, the handbrake has become very efficient. It works within 3 clicks. Earlier, it used to take 5 clicks. Please let me have your views. Thank you.
@denzildoctor5 жыл бұрын
Nice vdo. Well explained.
@2WheelDerness3 жыл бұрын
thanks for video. reduce the puzzle time when I`ll change mine.
@Bear-form4 жыл бұрын
This will help me on my 2006 Grand Vitara.
@OMAARVIP Жыл бұрын
I have the same car and my ESP light will not turn off. Any help?
@shawnshawn9112 жыл бұрын
Where can I get new rear wheel cyclinder online?
@raiderrx4 ай бұрын
Подскажите какие два болта которые используются для снятия барабана?
@claudiuvasile45763 жыл бұрын
Very useful 👍
@speedy7024 Жыл бұрын
Thank you soo much help me a lot
@generalrigs24296 жыл бұрын
Could this be a reason why I hear a horrible knock from the rear of my car while driving every so often?
@cusmile97487 жыл бұрын
Thank you for sharing.
@scicero15 жыл бұрын
bolt size not in description
@Technoaid-g5r3 жыл бұрын
Very good! Thank you.
@UKLifeway3 жыл бұрын
Which no of remover bolt
@MrBat0006 жыл бұрын
nice video. Thanks!
@GSmithkayakangling4 жыл бұрын
Good video, cheers.
@Pancho23-wi2fp5 күн бұрын
Спасибо большое пацаны 💯
@steve19628 жыл бұрын
I have a suzuki swift 1.3ddis 2005 - are my rear brakes the same as these? Brilliant video by the way - I am not great at mechanics but I could follow your instructions easily. Thanks. Steve
@MrTripplex954 жыл бұрын
I want to know also
@ufartface3 жыл бұрын
you want to lube the backing plate where the shoes rub
@xanavy3845 жыл бұрын
In Indonesia the rear disc brake model frm OEM
@peterhughes51873 жыл бұрын
Nice, clear video. Thanks. One question...when you loosen the handbrake cable, does the handbrake need to be off. Also do you have to do any resetting if the handbrake afterwards..
@peterhughes51873 жыл бұрын
@@jonbertjustesen510 Thank you very much.
@charlesgosselin35792 жыл бұрын
Nice Thank you
@o0crazyboneso0o37 жыл бұрын
My sx4 has disc at the back. Do you a have a video? disc with emergency bake shoes.
@volvosweden7 жыл бұрын
+anthony serra Sorry no. But its not difficult.
@TheMisterMib10 жыл бұрын
Все супер. Единственное что плохо,ты не смазываешь детали =( смазкой
@jimmimak8 жыл бұрын
The video says "bolt type in description", but it's not there. Is it M8 or something?
@volvosweden8 жыл бұрын
M8 yes
@pprelo7610 жыл бұрын
thank you !
@MiguelFernandez-cx2ym6 жыл бұрын
Do you have to bleed the rear breaks after you replaced them
@volvosweden6 жыл бұрын
+Miguel Fernandez no
@marshalldestro5 жыл бұрын
Hi, I did this job on my 2006 aerio (lania) but I forgot to remove the 10mm bolt for the hand brake cable, instead I detached the cable from the bracket it attaches to. I put it all back together properly, but now my hand brake is very loose. Is the best way to adjust it to go through the console near the brake lever inside the car like I have seen in other videos? Or is there a different way to do it. Thank you and great vid!
@volvosweden5 жыл бұрын
Any hardware store. Its M8 bolt
@Replevideo5 жыл бұрын
@@volvosweden Thanks. I was guessing it was M8 but it's good to know for sure.
@johndemore64022 жыл бұрын
Liana Life In A New Age
@skbabasatthar33572 жыл бұрын
Super bro
@SLDDEPO5 жыл бұрын
Здравствуйте. Скажите, а у вас есть видео как отрегулировать стояночный тормоз на сузуки sx4 задние тормоза барабанного типа?
@volvosweden5 жыл бұрын
Нет.
@hannahramsey63232 жыл бұрын
I need further description on the bolt size. There's tons of different M8 bolts that are different mm sizes
Есть разница по замене тормозных колодок, когда коробка автомат или механика? И что делать с ручником? надо не надо его ослаблять?
@volvosweden5 жыл бұрын
Честно не. Огу ответить на оба вопроса. Не знаю.
@Tao19882 жыл бұрын
thank you
@noelmorales72833 жыл бұрын
Ese trabajo requiere de limpieza y no lo hizo y al final no mostró el ajuste de frenos.
@xevier69115 жыл бұрын
What is the bolt size to remove the drum??? It says in description but there is NO description... :(
@volvosweden5 жыл бұрын
M8
@xevier69115 жыл бұрын
volvosweden Thanks! BTW... I like your videos... working on Aerio...
@mikethk8 жыл бұрын
Thx ALTO LOT. Works for Alto 2005 aswell. Very much the same, if not 100% the same. BUT.... You need better tools, SIGH.
@martlockuk10 жыл бұрын
I know you said the screw size was in the description but I can't find it lol. Can you tell me what size they are? Many thanks. I like your videos.
@yuriyermilov492310 жыл бұрын
M8
@martlockuk10 жыл бұрын
***** many thanks
@ZimboGamer3 ай бұрын
Is bro from Chernobyl, got 3 hands 🤔
@greemstrider7 жыл бұрын
Yeeeeee... that russian accent
@Bear-form4 жыл бұрын
Niko ..
@navuhadonoser13 жыл бұрын
А хуле ты думал, ваши гайки крутят?
@vova2639 жыл бұрын
пацаны говорите по русски все здорово делаете спаибо
@lemagreengreen5 жыл бұрын
Unfortunately there's two variants of SX4 drum brake, first gen cars sold in the UK (made in Hungary I think) have a different adjuster mechanism which isn't as reliable as this and a bitch to set properly.
@volvosweden5 жыл бұрын
Good to know. Thx for sharing this info here for others.
@Jbieberlykesdick Жыл бұрын
And use a completely different brake pad as I found out with my 2008 Grand Vitara... Oem part 53200 65J01 says its not for my car, even though it is literally whats installed
@SLDDEPO5 жыл бұрын
Можно это видео на русском?
@volvosweden5 жыл бұрын
К сожалению не будет. Если есть вопросы могу ответить.
@serikminaliev86098 жыл бұрын
можно всё ваше видео на русском языке о сузуки? Вы ведь на русском говорите!
@volvosweden8 жыл бұрын
Теперь будете озвучка на двух языках. Спасибо за Ваше внимание.
@GetHigh7 жыл бұрын
9:49 гайки одевай))) русский язык))
@volvosweden7 жыл бұрын
+Получай Кайф Что поделать. Три языка знаю и все не полностью.