All I can say Bale, is HIRE A FULL TIME EXPERIENCED MECHANIC for this new fleet, and all your other equipment. Your gonna need it to keep things running even moderately smooth!

Very nice New Holland Self-Propelled mower demo and tour of the upgraded mechanics.....makes me want to buy one!

You hit right on the head... when you lightly commented on drivers (for your future trucking gig)........ that will be the constant challenge.... good luck to you...

Literally made me lol at the “shooting them in the face” and “people are dumb” lines. Epic.

30 mph down the road sounds crazy! Looks like a nice machine. I just went from Deere to Case self propelled rotary and really like the change. Older machines than this though.

Good review, very informative. The salesman did address your concern and did not appear to shy away from it. You commented about the edges.

We ran New Holland self propelled swathers back in the 70's on a custom hay crew. If I remember right we drove about 12 mph. Also had NH self propelled balers and a bale wagon. They all ran very well. Thanks

I’ve ran a new Holland for a couple years a decade ago. That thing looks lovely, new Holland is really stepping up their game.

👍 Great video! Good job making the demo interesting.

Really liked the video hope you keep them coming .

Great video that was a beautiful machine!!!!

We have a 9770 Massey and when I got into 3.5 ton pluss grass I couldn't cut it with new knives and max header speed. Used my neighbors NH hw365 and cut it at 7 mph no problem. That 416 with the auger had no trouble in the grass. In alfalfa though Massey for sure! Great video

Welcome to the trucking world. It has its pros and cons. You have more control when you own your own trucks but you also have more headaches such as matinance and keeping them road worthy.

Way neat video. The cameras showing how the header works was a great idea.

Hello from Moosomin ,Saskatchewan, Canada Great videos thanks for sharing.

Seeing you toss those bales on the truck from the stack that you forgot reminds me of my youth in a small farming community in Indiana. I would hire out in summer while in high school and bale hay for the local farmers. Of course back then (60 years ago) we pulled a hay wagon behind the baler with a rack on the back of the wagon to keep the bales from falling off the back. As I was going to be riding the wagon, I would ask the farmer how he wanted the hay stacked on the wagon. For hay, it was usually "5 high with a tie", for straw it was 6 high, though one or two ask for 7 high with straw. As the farmer drove the tractor, pulling the baler, pulling the wagon where I was located it got exciting at times. I had to pull the bales out of the chute, carry them to the back of the wagon and manually stack them. Of course there was always loose hay on the floor of the wagon which made the footing somewhat unsure. Also, being in Indiana the fields were not as flat as they are in Arizona which added an additional dimension to the task. As the fields were somewhat smaller, the farmer would often rake the fields around the corner in a somewhat circular fashion instead of long straight rows. This meant the we would still be baling as the farmer went around the corner. This also meant that the next bale was being spit out when the tractor, baler and wagon were out of alignment and I would have to stand on the front corner of the wagon and grab it when it was about 2 feet away from the side of the wagon and bring it in. Ah yes, good times!!! As I was 5'8" and weighed maybe 155lbs soaking wet, it got exciting at times. I don't know how much the bales weigh today but back then they were about 1/2 my body weight plus or minus. I did wind up with excellent upper body strength though! ;-)

I'm impressed how fast they go!!!! Looked like 60 mile an hour on the video 😆!!!

1 thing though is you can’t out condition Massey cutters. I specifically remember cutting our crop on the same day as our neighbors. We have 16ft on 9635 they have a 16ft on a macdon. Our hay was raked 2 days earlier. And our first bale was made 3 days before there first. Our crop was actually heavier then there’s too. Keep in mind this 2x the height/yield of crop then in the video. The premo cutters around here in southern ab is a Massey hay cutter. The biggest of hay producers around here use Massey cutter only for the conditioning ability. I’m not sure if you know hubkas or green prairie. Speed of cutting doesn’t matter for us it’s how fast you can have it raked and into a bale and in the shed

Congrats on the truck purchases. Hope you can find drivers we can't here in Montana. No one wants to work anymore.

Pretty kool ur buying more trucks im excited to see that adventure and that demo is sweet good luck with everything

Being a big rig owner is gonna bring it's own set of problems but you can work through them The problem is finding drivers worth a darn and keeping them long term. Love the new equipment but if ain't broke don't fix it. Great video. 😎👍👌

Way back when we were haystacking our windrows were half as wide and four times as tall. We used Hesston 60A tine pickup Stack Hands.

I can send Jason out to run semis!!! Lol 😆 but I’ll need him back come April

That new Holland did a great job making a neat and uniformed swath. Looks like it could be a contender in the future. It's always good when they demo and listen to feedback on what farmers need for consistent dry down. Great video and see you next time

The old Massey left a little more raised edge, Always been a NH guy. With that being said the old Massey small Sq balers and their feed system was better until their patent ran dry, then starting with the NH 575 balers I believe the NH came out ahead. Our first self propelled swather was what we called a crazy wheel. they still work the best for a sickle mower in grass hay.

If I had a CDL I would come to Arizona and help you guys haul hay for the summer

Shoot I get nervous driving 7 miles an hour swathing. Although it’s not irrigated land, can find gopher mounds, frost can push football sized rocks up and out, & we know where the boulders are sticking out roughly. Although just 2 years ago we found a homestead well casing about 12” in diameter that we had been missing last 6 years.

I work at a Golf Course in MN during the summer and we went from Hydraulic gangs on our fairway mower to Electric gangs. Only difference I have seen in two years is with the hydraulics you worry about a hose breaking and killing grass. With an electric unit if there is any sensor issues the mower is moot until you find a "golf course electrician" :-)

We had a new Holland small baler 50 years ago Then we had n h big baler in the early eighties

Love the gopher story hilarious dream.

I’d be there if I lived that way bud. 👍🇬🇧🇺🇸

That's a wild dream what you eat before you went to bed lol. Sounds like some Caddy Shack stuff.

Semi's= always something to fix...Up north here we always call them Haybines disc or sickle....Swathers have canvases and are used to cut grain;)

I love my NH HW340 16ft discmower, at 2,500hrs just done the header pump rebuild and now the turtle gearboxes are starting to go, 3 done and 9 to go at $350 cdn each. Man that 30mph sounds like a squirrel on RedBull

Yo, but the New Holland maybehas new sharp knives and the Massey blunt knives?

Looks like CNH has been reading the AGCO playbook - the electronically-controlled hydro pumps and the overall rear axle design are like what Massey windrowers have been using for ten years.

Those big Gophers you're talkin about , we call them prairie dogs up here in North Dakota. After years of trying to eradicate them, now the government has protected them. I don't have nightmares about it but it's a little frustrating. Too bad we can't ship them to where they live and then they can worry about the plague they carry. Obtw, it would be great to be one of your semi drivers but at my age of 70 , with the poor circulation in my lower extremities. Also with that enlarged heart skipping a Beat, when I'm sitting in a seat , it doesn't do it when I walk down the street. It seems to keep the doctors from signing my medical sheet!

Yes I do

Hard pick, both make great machines.

👍great video

Thanks Treavor for an interesting video. You taking us along to look over the new swather by New Holland was extremely interesting. Was quite interesting seeing and hearing about the updates and new design of the machine. I must admit that the windrow it laid down was very smooth and even cut. Now I am not a hay person so I say that just looking at it. Seeing the inside of the machine was interesting. Seeing the rubber tubes that squeeze the hay moisture down was new to me. Always wondered how they did that. When those knifes are running, boy that is a high speed situation. 18mph cutting is pretty darn good. Wow. Nice machine. What would a standard machine like that cost??? Is the cab quiet??? The cab and controls I assume are about the same. You said one of your operators used the demo machine. What did he think of it compared to his current machine????? Stay away from the gophers-ha. Leaving a stack in the field-probably have to dock your pay. Many thanks for your time doing this. I found it really interesting. Looking forward to the next video. Thanks. The Iowa farm boy from years ago.

220 plus. I think that pretty close to what they cost now !😳 you sure you should be combining that alfalfa instead if swathing and bale it. 😃 we demo it for 3 days it’s a good machine.

A new and improved no rower

A single airbag with 4 link suspension it will bounce at high field speeds

That dream sounds like fun maybe next time invite me

Great day on you tube. I saw swather races and telehandler races!! Lol I’d be curious on the New Holland about how easy to do maintenance. Still a sweet looking machine. Have you considered MacDon? They have some cool features like when you go down the road. Back end first.

That gopher dream though...🤣😂🤣😂 Stay Golden! 💪🇺🇲👍

You had a caddie shack dream!!

Just curious have you ever considered a triple mower or dedicated Mower like a krone big m and what’s the advantage of a swather for your farm

How much is the price of the alfalfa scissors?

They should let onelonelyfarmer test it out

18 mph cutting speed? Holy cow! That new "turtle" cutter header is amazing. I only drove sickle bar headers. Nowhere near as fast and clean as the turtle. And I hated breaking a tooth and leaving a strip down the field and fixing it in the field. :-( Also, love the family and company name. Do you sell merchandise to the public?

"Dan-Sauerfoss drives"? Must be new. I've only heard of Sauer-Danfoss drives 😅. He was obviously nervous. Nice machine but I'd probably stay with what you know. I didn't see any big advantage, unless it's price.

Man if I would go work for you if I could I drive retriever truck for star milling Co but without cdl it's along distance!

do you guys run autosteer on those swathers?

After growing up in New Holland 1112 and 1116s I would never own another NH no matter what they’ve improved now! Looks like NH has pretty much just copied the Massey with the dual hydraulic pumps. We’ve been really happy with the Massey Razor Bar headers and double conditioners. They do kinda suck in heavy short grass though The new MacDon heads are pretty good in that regard but still don’t cut as clean in my opinion. Massey dumbed down the TopCon GPS and it flat sucks without RTK. Probably not as big a problem with straight swaths compared to pivots

I’ll come haul hay where there’s nice roads and no snow lol

How wide is that new Holland swather?

Car seat in the back, seat belt over left shoulder?

I wonder if that’s the same head they put on the hydro swing mowers

Where you from imma go to truck driving school first year

What RPM are The Cutter Heads Running?

What kinda pay you have for a driver

need drivers like me Trevor, who can drivem and can fixem. Exactly correct. Some one who can fix them CORECTLY. that is the one tiny word CORRECTLY. sorta how i tell it, A Driver who can get from "A" to "B" with out any service trucks fallowing them, and getting Home to "A" with out a 20,000 repair bill required before next trip. or possibly a truck laying on it's LID. The worst of the worst is todays trucks with their ELLECTRONIC Night Mares. as far as i am concerned COMPUTERS are made to sit in a dry heat controled HOUSE not on wheels in possibility of rain snow blistering hotness freezing cold ect ect.

im running a massey triple mower on a 936 fendt, spring tooth conditioner, im dropping 30 feet at 14 mph its banging, neighbors got nothing on it

Have you ever considered getting triple mowers

Massey all the way

Isn’t a Krone Big M better for your operarion? Krone’s always at the top of the forage game 😎

Demo New Holland v. older Agco/Massey 🤔😉...so, New Holland is experimenting to catch up🙃

Ask your friend to keep an eye out for a springer for me. Lost my best friend to old age a while back.

Gotta love the new hydraulic machinery .... it's just glorified logsplitters lol so much easier to work on

Idk your email but that's my dream job but in 16 in calexico California but if I'm working on a farm i don't need a cdl and i can only go 120 miles into the next state

Can I have what you have before bed!!!! I’d come drive but idk if I can handle the heat

Didn't you just get 3'' of rain, I know your in the dessert 3'' disappears that fast? WOW

Looks like the New Holland is still leaving streaks in the windrow.

umm all looks prity god but dont think much to those alloy pumps can see short working life been pushed like that

What happens when that swather hits a gopher or other animal? Does the carcass go into the bale?

Hello interesting video. That kinda speed is unbelievable but it does not give any consideration for animals in the field and that should be your concern also whether you think you need thouse elements or not you need them. What's your view as a shepherd of the land? I like making hay I enjoy it. Have a good day.

Are you considering buying the New Holland

Humm, you think you're dream gophers are big? Muh gophers not only drug in a sofa into their hole, but also a mini fridge. And for me, that was the last straw for them uppity gophers. So I had to go out and buy a flamethrower. Oddly enough it's perfectly legal; not to mention downright flame-throwing awesomeness and fun. BTW: The New Holland windrower looks like it's doing a great job. Windrower? Is that even a word?

rattle snakes are tasty dinner... not sure if you can eat gophers... but if one get hungry enough..

Everything looks way faster on a Go-Pro, but them swathers are still shifting along!

What do they sell for ??????

I know more than you guys, just wanted to see how you were presenting new machines!

hell yeah id come be a truck driver lol

Massey ferguson rule!!! Enough said.

Can’t even order a NH swather with a steel on steel roller crimped either.

Id be there in a second

18 mph? I don’t have a field that I can even drive 10 mph.

U can if u look closely

I want to get my CDL and I would love to drive for you guys

I want to see them cut cattails

Caddy shack bales hay style 😂

Need a John Deere to show them up they can cut in road mode at 22 15 normal we can cover about 200 acres a day with 1 machine with some road time and generally small fields

Big sandwiches equals big dreams ! Lol

Rubber roller suck I already see a big cut and split a brand new one on the new Holland steel on steel is the only way to go brother

Maybe ROUS's...

Make your Health number one priority after God. Everyone else will see the benefits. Talking from experience. 18-year-old plus disabled dude .Who has experience God’s blessings.PS your nightmares are awesome! They are so cool! Again God bless. Lol

We called the rollers, crimpers

The thumbnail picture made me laugh. There’s no way a new Holland can put cut or out perform a razorbar hesston. Just know way. I’ve drove both and ran with both in the same field. Nothing out cuts nor out performs Hesston.