SWAY BAR BUSHINGS | Professional Sound Diagnosis & Replacement

Рет қаралды 487,058

Күн бұрын

BAD SWAY BAR BUSHINGS AMPLIFY NOISE INTO THE VEHICLE. SOUND SO LOUD IT SEEMS LIKE SOMETHING MAY FALL OFF THE VEHICLE! PROFESSIONAL TEST FOR FRONT & REAR SWAY BAR BUSHINGS. SO EASY YOU CAN DO IT AT HOME!
Full Video: • BAD SWAY BAR LINK SOUN...
*if I have helped you out-please consider tipping me with the "Thanks" button 😃
Video parts ✅
Dorman 928-344- amzn.to/2A0X1zO
Favorite tools ✅
Wireless Chassis EAR: amzn.to/3n3EkaQ
Quiet Bands: amzn.to/2Lr3CKo
Headlamp: amzn.to/2LskvEG
Hub shocker: amzn.to/2Q2b0jO
Power Probe: amzn.to/2NTyaGg
Hydraulic flare kit: amzn.to/2N8Ijzg
Antivibration hammer: amzn.to/2N8W8ho
Pry bars: amzn.to/307BL6b
knuckle savers: amzn.to/2LnkfGS
Spark plug sockets: amzn.to/2N7dnzB
Hose tool: amzn.to/2LoD649
Chassis Ears: amzn.to/2Ltl1SD
Soap: amzn.to/332qyWd
Pewdiepie Chair: amzn.to/2SfIElm
My dogs favorite toy: amzn.to/36irgRl
Ultimate wheel bearing removal tool ✅
Hub Shockers: • HUB SHOCKER Hub Buster...
Support the channel and grab some swag ✅
EF-Merch: teespring.com/stores/easy-fix...
Thanks for being here. Your time is valuable.
~Shaun 🔧
00:00 Bushing Test
01:10 Replacement
03:20 Retest For Play
Easy Fix is a participant in the Amazon Services LLC Associates Program, a program designed to provide a means to earn advertising fees by linking to amazon.com
If you purchase from affiliate links I will get a small commission with no extra cost to you. This helps me to make more videos. Thank you!

Пікірлер: 440

@EasyFixShaun 5 жыл бұрын

*_Watch this video NEXT!_* Sway Bar Link Noise *_ride along_* kzfaq.info/get/bejne/pJuFntmcm7XRk6s.html *_New 2022 sway bar link video_* kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html Sway bar system playlist: kzfaq.info/sun/PLCxbUgf2LX3Rj_ihr76DVVS3R1ySksM_s

@salentinasalentino9634 3 жыл бұрын

IO AVEVO LA 2007 CHE FACEVA RUMORE PRENDENDO BUCHE MA RUMORE MACCANICA CAMBIATO TUTTO

@EasyFixShaun 3 жыл бұрын

@@salentinasalentino9634 Eccellente. Sono felice che tu abbia riparato il tuo veicolo 😃

@scottcondie1363 3 жыл бұрын

Thanks for showing the play in the bushing before and after, it really helps show how it should be

@EasyFixShaun 3 жыл бұрын

No problem. I wanted to show an idea of the difference. Tough to capture sometimes 😀🔧🔧

@NessOrtiz-lk2yy 9 ай бұрын

When they are bad do they sound like metal on metal

@NessOrtiz-lk2yy 9 ай бұрын

I have replaced the front suspension more then once because Amazon sold me a defective part that cause strut blew and rocked my qx56 to shift back in fourth cracked my other strut smh now I thing maybe the bushin

@shunjohn3567 4 жыл бұрын

MAN I BEEN TRING TO FIND THE CLUNK SOUND IN MY CAR FOREVER U JUST HELPED ME!!!!THANKS DUDE!!

@EasyFixShaun 4 жыл бұрын

Excellent! No problem. Thanks for checking me out.

@thebigshift Жыл бұрын

My mechanic first serviced the disk breaks. Then changed all the suspension bushes in the front. Lastly changed sway bar bushes for this problem. Where is mental hospital i want to admit myself and him.

@EasyFixShaun Жыл бұрын

Cars can be super frustrating. Sway bar links and bushings can be very elusive also. The NVH Noise Vibration Harshness they cause can be super difficult to track down. Sorry you guys had to take a few extra tries at it. It for sure happens on occation. Im glad you got it fixed 😀😀

@ferndog1461 2 жыл бұрын

Thank you, Bro. Using the pry bar to see if there is a gap in bushing is the test. Excellent.

@EasyFixShaun 2 жыл бұрын

No problem. See if you can feel any play or too much looseness in there. It doesn't take much to make some thumping noise 😀🔧

@ChristianGutierrez 3 жыл бұрын

Really love your arrows and drawings over the video, superb way to pinpoint stuff out!!!

@EasyFixShaun 3 жыл бұрын

Thanks! I really appreciate that. It takes a lot of time to make those small effects. 😀

@badbrother_g 3 жыл бұрын

Simple and direct. Thank you! 👍

@EasyFixShaun 3 жыл бұрын

Glad it was helpful! 😃🔧🔧

@silvioroesler8284 4 жыл бұрын

Thanks for posting, very clear and concise.

@EasyFixShaun 4 жыл бұрын

No problem. Thank you for watching!

@Conservchick 2 жыл бұрын

Great video. I just purchased the bushing kit (16.00) and I am doing this today. Thank you

@EasyFixShaun 2 жыл бұрын

No problem. Good luck😃🔧

@DylanMorehouse 4 жыл бұрын

Nice video thanks for the great upload as always!

@EasyFixShaun 4 жыл бұрын

No problem! Thanks a lot.

@ibanezmakki 4 жыл бұрын

Just awesome! You'll be amazed just how few mechanics can diagnose something like this. Great job.

@EasyFixShaun 4 жыл бұрын

Thanks man!

@infiniti_chik1225 4 жыл бұрын

Well, even the few that could diagnose it - the question is, would they tell you that it is a simple fix as shown in the video, or would they try to act like you need to replace the entire sway bar....hmm

@ctm9699 4 жыл бұрын

Man I was told the bushings were cheap but a lot of things need to be dismantled so the garage guy was asking a lot of labour charges ..just wanted to check this video before I could go ahead.im glad I did

@ash2092013 3 жыл бұрын

than you! i’m going to try this tomorrow morning!

@EasyFixShaun 3 жыл бұрын

No problem. Good luck!

@ua7pyro591 2 жыл бұрын

Fantastic! Works for most suvs. My damn Kia was rattling like an old wagon. Thank you.

@EasyFixShaun 2 жыл бұрын

Haha! No problem. Yup same concept in every vehicle front or rear 😀🔧

@theexodussoldier5856 3 жыл бұрын

On the 2010 cobalt LS there are two options on the bushings. There is a 18mm and 24mm depending on sway bar thickness. Took me a while to find that out

@EasyFixShaun 3 жыл бұрын

Oh! Sometimes a larger bar is used for performance models 😀🔧🔧

@daviddavis7878 2 жыл бұрын

Hopeful this will work, your video was great. My mechanic has replace the struts front and rear and one motor mount over the past 2 years to get rid of the clunking but never has. I just changed mechanics and he suggested the sway bar and this seems quite like the origianl problem. This noise drives me nuts when I am driving my wifes car 2007 Ford Freestyle. Thanks for the clarifications

@EasyFixShaun 2 жыл бұрын

No problem. Let me know if the replacements help. They are some of the most common and cheapest parts that wear out on the steering and suspension system. So when they go bad at least we have that going for us 😀🔧

@BringBackMasculinity1987 5 жыл бұрын

I gotta do this on my 13 Yukon! Mines sound really terrible. Thx for the vid bro!

@EasyFixShaun 3 жыл бұрын

Sorry buddy. Good luck! 😃

@gkireland7796 3 жыл бұрын

Helpful, thanks.

@EasyFixShaun 3 жыл бұрын

Yup! Thanks a lot for your comment 😀

@NG-sf9tu 5 жыл бұрын

A++ Excellent Video

@EasyFixShaun 5 жыл бұрын

*_Thanks a lot! Really appreciate :)_*

@thurm101 5 жыл бұрын

Great video. I just ordered a set for my front. I only got the bad clunking when it was real hot outside. This drives me crazy. I think this is my issue. But great video.

@EasyFixShaun 5 жыл бұрын

Thanks man, I am glad it helped out. Good luck!

@tonistarks2874 4 жыл бұрын

Great video bro!

@EasyFixShaun 4 жыл бұрын

Thank a lot man 😃

@Tomsfoolery. 5 жыл бұрын

Great video!

@EasyFixShaun 5 жыл бұрын

Thanks a lot!

@manjichromagnon5480 2 жыл бұрын

Nice presentation. Thanks :)

@EasyFixShaun 2 жыл бұрын

Glad you liked it!

@chevroletsail7324 5 жыл бұрын

Useful 👏👏👏

@EasyFixShaun 3 жыл бұрын

Thank you 😀

@diegonunez6874 4 жыл бұрын

Good video you make look so easy ¡!

@EasyFixShaun 3 жыл бұрын

Thats my name. 😃

@sulimandc3467 4 жыл бұрын

That was useful, thank you

@EasyFixShaun 4 жыл бұрын

You are welcome. Thanks for checking it out!

@sulimandc3467 4 жыл бұрын

@@EasyFixShaun I changed my grand cherokee sway bar after one day of your video, and the clunking immediately stop

@user-dg2fy4ed5g 4 жыл бұрын

بارك الله فيك good

@EasyFixShaun 4 жыл бұрын

Thank you!

@hardycoffman6896 6 ай бұрын

Great video! Subscription earned!!

@EasyFixShaun 6 ай бұрын

Thank you. Welcome aboard! 😀

@martincraven1411 4 ай бұрын

Great video smashed the like

@EasyFixShaun 4 ай бұрын

Much appreciated😀😀

@agustinvazquez3266 4 жыл бұрын

Great video! Thank you!! I have done basically the whole front suspension, upper and lower ball joints, sway bar links etc. Still had a bad noise that was driving nuts. I had the bushings just need to find the easiest way to install them. Your video helped so much. Saved me about$500 on new shocks and struts.

@EasyFixShaun 4 жыл бұрын

Awesome man! I am glad you got your ride repaired 😃

@bobrat 2 жыл бұрын

Good video pleasant instruction

@EasyFixShaun 2 жыл бұрын

Glad it was helpful! 😃🔧

@jeremyfarillon2512 4 жыл бұрын

Got an idea how to diagnosed easily. Thanks

@EasyFixShaun 4 жыл бұрын

I’m glad it helped!

@tomstickney5500 3 жыл бұрын

thank you

@EasyFixShaun 3 жыл бұрын

No problem! Glad to help 😀

@steveau1747 2 жыл бұрын

excellent

@EasyFixShaun 2 жыл бұрын

Thank you. Glad it helped you out!😀🔧

@salentinasalentino9634 3 жыл бұрын

BRAVO😁

@EasyFixShaun 3 жыл бұрын

Thank you 🤓

@user-oc6wi3tg1h Жыл бұрын

感恩，謝謝分享！

@EasyFixShaun Жыл бұрын

沒問題。樂於助人！

@gasperajdnik5627 4 жыл бұрын

Tanks mate 👍☺️

@EasyFixShaun 4 жыл бұрын

Ya man! No problem. Anytime. 😃

@gasperajdnik5627 4 жыл бұрын

I like your videos 😀. Keep Up The god work

@ramsesmunoz1889 3 жыл бұрын

Mucho bueno amigo

@EasyFixShaun 3 жыл бұрын

No problem! Thanks for watching. Really appreciate.

@rogersohis2297 3 жыл бұрын

Thanks for the info

@EasyFixShaun 3 жыл бұрын

Glad to help!

@rogersohis2297 3 жыл бұрын

@@EasyFixShaun yeah that was the cos of the noise in my car. May the Lord bless u nd grant u all ur hearth desire

@EasyFixShaun 3 жыл бұрын

@@rogersohis2297 You are welcome. May there be many great blessings upon you sir! 😃

@tinadipaulo1602 5 жыл бұрын

I sure hope this is what my problem is. Ordered bushings. Fingers crossed.

@EasyFixShaun 5 жыл бұрын

Good luck! Let me know how your project goes.

@Stranger_In_The_Alps Жыл бұрын

Well? Did the bushings fix it?

@ericmeyer4583 2 жыл бұрын

Thanks, I never thought a Suburban drive train would out live the bushings

@EasyFixShaun 2 жыл бұрын

Haha. No problem😀🔧

@adilalhumady1672 4 жыл бұрын

nice

@EasyFixShaun 4 жыл бұрын

Thanks!

@FFL-tn4yk 3 жыл бұрын

Professional!

@EasyFixShaun 3 жыл бұрын

I hope it helped out 😃🔧

@gabemartino5634 8 ай бұрын

Is it necessary to have the front end lifted when replacing the bushings?

@fatherguidosarduchi5204 Жыл бұрын

I just replaced the front and rear bushings on my wife’s grand cherokee. They were banging around a lot. A very annoying knock. The bushings are dirt cheap and an easy quick replacement. No more knock and happy wife now. VERY IMPORTANT!!!!

@EasyFixShaun Жыл бұрын

Outstanding! I am glad you got it all fixed up! 😃🔧

@rafaelk263 4 жыл бұрын

Cool vid 👍. I had thought the bushings went "harder" with age. I didn't know better. In the vid you're working on a rear axle right ? I've got kind of a funny noise but mine's up front, when turning the wheel almost all the way. My ball joints (steering, suspension) are less than 10k miles old And my bar links are also pretty recent. I'm guessing it's those bushings. Ought to be them, right ?

@EasyFixShaun 4 жыл бұрын

The bushing are basically made of a polymer or rubber compound. They are made to be softer than the steel bar that goes through them. So basically the bushings will typically always be the wear component. I would highly suspect them. But to be sure I always shake everything down and try to locate the loose component. 🙂

@nfsdude0125 5 жыл бұрын

Great video, thank you. Looks like I found my clunk!

@EasyFixShaun 5 жыл бұрын

Awsome! I’m glad it helped. Those bushing and also the sway bar links can make a lot of noise when they go bad.

@rondhole 3 жыл бұрын

@@EasyFixShaun I have Crorolla IM has similar clunk on your video about sway bar link noise but when I checked it, everything is tight and the bushing is also not as bad as yours. Thanks.

@EasyFixShaun 3 жыл бұрын

Ok. That type of noise is most likely sway bar type noise.There are other components that can make similar noise. You will need a complete steering and suspension inspection of every bushing, tie rod, ball joint, strut to find the loose component. 😀

@rondhole 3 жыл бұрын

@@EasyFixShaun it is from the rear, I checked the ball joint, bearing, and any bushing that may crack but everything is tight. It is not steering since no noise in a curvy road. Only when it has some flex left and right not at the same level, which is what sway bar area got the most strain for such movement. The struts and springs are all tight and no noise in any large bumps, fast speed cornering, etc. Only at low speed with a rough road. Higher speed does not change the loudness of the rattle/knocking. There is a slight gap on the bushing when I jack one side up, so I will change the bushing first. It started after my 1000miles road trip in the rocky mountains.

@EasyFixShaun 3 жыл бұрын

Ok. It’s hard to tell exactly what it could be from here. But starting with the obvious is always a good idea. If there is some play in the bushing it would be an excellent test to replace them and drive it again and see what you have. 😀

@joehyundaitech7961 Жыл бұрын

I see its made by Dorman I wonder if they sell this setup for my 03 ford focus I like the kit new hardware and bracket real nice

@EasyFixShaun Жыл бұрын

I am not sure. Go directly to dorman's website and do a part look up. It is pretty easy to do and you can see what other parts they make for your car also. You can also be 100% sure you have the correct part number and then look it up on ebay or amazon or rock auto or wherever 😃🔧

@jesbsnrn Жыл бұрын

good job. i was just wondering if the car needed to be jacked on both sides at the same time to replace these. or can it be done without jacking car up. my accord been clunkjng in the rear for ten years

@EasyFixShaun Жыл бұрын

The axle being worked on needs to be level. Level can be done in the air by lifting and letting both sides droop evenly. It can also be done on level ground. The sway bar system doesn't hold the weight of the vehicle so it can be serviced on the ground or in the air. If the axle being worked on is not level there will be twist in the bar and pressure can be applied to the parts. Servicing components could be dangerous because of the "spring" like pressure in the bar. Removing parts and installing could be dangerous and also difficult to line back up. As long as everything is level, side to side suspension is equal height, should be good 😃🔧

@clearsailing7993 4 жыл бұрын

I like your video. We were required to wear safety glasses. On the third write up for not having them on, we were fired.

@EasyFixShaun 4 жыл бұрын

Thanks man! Yes safety glasses should always should be on. I forget sometimes 🤨

@mistyssidemeattreat9498 3 жыл бұрын

Found the Safety police!

@XMostaxX 4 жыл бұрын

I'd have loved hearing the noise before the fix, and check if it's gone after it.

@EasyFixShaun 4 жыл бұрын

Good point. You have to use you imagination a bit with the video. I will make another video for you. Seriously. 😃

@XMostaxX 4 жыл бұрын

@@EasyFixShaun It was quite helpful to get me to know where to start. Thanks

@EasyFixShaun 4 жыл бұрын

No problem! I am super glad it helped!

@onilovni1234 4 жыл бұрын

My 2010 Acura TL looks like these bushings are worn out on the front and I do hear a metallic noise over sharp bumps. Are you sure this was the culprit in your case? Have you got rid of that clunking noise?

@EasyFixShaun 4 жыл бұрын

It did fix my problem. If your bushings are loose like in the video they are the first thing to start with because they are the cheapest suspension component on the car. Replacement is usually pretty straight forward. There could always be more parts needed. Sometimes the links are needed at the same time. Car repairs aren’t always cut and dry. When in doubt start with the cheapest items to repair. Both links and bushings are common failure points on most suspensions.

@foresterlady448 5 жыл бұрын

Do you have any advice if the bolts are extra stubborn to remove? I drive a rust bucket 😂

@EasyFixShaun 5 жыл бұрын

Yes! Rust sucks. In Michigan it is just part of life unfortunately. Its a salt problem. We have the worst cars, but we have the best boats! Anyways, three methods for stubborn bolts starting with the least intrusive. First soak in PB Blaster or another penetrating solvent. If that doesn't work heat them up with a map gas torch or something similar. If that doesn't work cut them off or drill them out. Replace them with standard bolts nuts and washers.

@julesrockz2960 3 жыл бұрын

Hi there. Question when installing a bushing , should it fit some what tight with out the bracket being installed yet?? Thanks

@EasyFixShaun 3 жыл бұрын

Yup! That sounds just like how I would want it.

@julesrockz2960 3 жыл бұрын

Thanks so much,. I didn't know bushings came in two different sizes for my F150. I had the wrong size..

@EasyFixShaun 3 жыл бұрын

@@julesrockz2960 No problem! Sometimes manufacturers will change the sway bar diameter depending what suspension package the vehicle is ordered with. 🔧🔧

@thurm101 5 жыл бұрын

I real the comments. So I am going to put them on dry. No grease. Just like you stated about the squealing.

@EasyFixShaun 5 жыл бұрын

Sounds good! Dry is the way to go for sure.

@ctm9699 4 жыл бұрын

I went to this garage to replace the drive shaft and asked him to check if the bushings were fine.He opened the connections to the sway bar and rotated the bar with the bushing intact and told me the bar shouldn't rotate so easily and told me they need to be replaced. He told me the bushings were cheap but he asked me a huge amount for the labour charges.told me he needs to open a lot of things. He didn't shake the bar like u did..just rotated it and said it needs replacement..should I go ahead. I just paid a huge amount for the drive shaft and labour charges do I need to change the bushings now?

@EasyFixShaun 4 жыл бұрын

Hi C P! Can you send me a video? I can check it out for you. I am not sure what year, make, model, engine, and charges for your repair are. If you can get specific I can see if it is a reasonable repair price. Cars are expensive to fix but bushings are usually relatively very inexpensive in the car repair world. Usually a bushing repair is $100-200 max. That is just a generalization though and not a rule of thumb. Every car is different. Most bushing replacements pay .5-1.0 hours at a shop for reference. You can bounce those numbers off their shop rate. Most bushings cost $20-80 max. Usually the bar will NOT rotate at all in the bushings. So I am not sure what you mean by that. Now, If you have a sway bar link that needs repair, the total bill can be equal to double that of a bushing repair. Maybe you have a link bad?? Does that help? A video speaks a thousands words if you can get one. Thats the best way for me to see if your part is defective or not. Send me a video! 😀

@peterrudy9207 10 ай бұрын

I'm able to use a mechanics lift when changin my oil at 5000 miles . And when the oil is draining , I liberally spray all rubber components / parts underneath with 303 Protectant . As to resist them drying out and cracking . And some people soak rubber components / parts overnight in it , wipe off and install .

@EasyFixShaun 10 ай бұрын

Interesting. Does that stop cracking long term? Will it work on tires also?

@peterrudy9207 10 ай бұрын

@@EasyFixShaun Yes , it deflects the UV rays of the sun . I periodically spray the outside tire walls and just let it soak in . Anything rubber or plastic it will protect . I power wash my engine compartment around every six months and let dry . And then liberally spray it all over the engine compartment and let it soak in . Again , to resist the heat of the egine on the rubber and plastic parts , keeps them new looking . As my intake valve cover is plastic . You could search for auto detailing channels , where they mention it's use .

@EasyFixShaun 10 ай бұрын

Interesting. I will check that out. Thanks! 😀

@ryd137 5 жыл бұрын

does it clunk in the rear backing out of drive way / pulling in drive way and even going straight over bumpy roads

@EasyFixShaun 5 жыл бұрын

Yes! Especially over sharp bumps.

@mychannel-mt3ik 4 жыл бұрын

What causes this noise

@EasyFixShaun 4 жыл бұрын

When the rubber bushings that hold the bar to the frame get worn and loose there is a gap between the bushing and the sway bar. The bar basically rattles around in the bushing or bushings. There are always two bushings. There is a lot of force from being attached to the suspension on the ends where the end links are. When any of the sway bar components become worn and loose the noise is amplified because the sway bar is attached to the frame by the bushings. It can be so loud that it sounds like something is falling off the car!

@jerrycollins7694 4 жыл бұрын

Going down a bumpy road

@TheAlexander9871 4 жыл бұрын

I need to change my 03 Altima bushings and I need advice if it’s a good idea to buy them new online then install them or just get them new from the dealer ‘more than double the price’ also if there’s a difference between front and rear bushings or just buy 4 of them ? Thanks a lot.

@ho0dini794 4 жыл бұрын

Same question I have do we buy 2 for the front and 2 rear? Probably so I’ll keep you posted once I receive the parts this week

@EasyFixShaun 4 жыл бұрын

Usually they come in pairs when you buy them. Usually the fronts are different from the rears. I would look up the aftermarket parts you need based on the year, make, model, and engine that you have. When looking them up at the dealership the vin number is usually the best way so you will want to have that handy. On bushings usually any brand will work fine. Since they are usually dirt cheap parts in general I don't hesitate to use OEM parts from the dealers. They are usually very similar in price and the quality is always better. With nissans, parts are generally harder to find so that may be your only option. Good luck! 😃

@EasyFixShaun 4 жыл бұрын

Yup usually they come in pairs. Not always, so double check when ordering 😀

@jonnnn4895 3 жыл бұрын

These are 12 $ by moog for rear and 12 for front at advance auto

@ryans413 Жыл бұрын

My car is so annoying when driving not even going over any bumps just driving down a smooth road all I hear clunk clunk clunk. From the front end it really sounds like sway bar it’s a lower end noise but kinda in the middle of the dash is where you hear it inside the car. Both sway bar bushing mount the bar on the body so it’s probably that.

@EasyFixShaun Жыл бұрын

Sounds very likely a sway bar component! Here is my newest video with a Sh9t ton more information on both the links and the bar to help you out 😃🔧kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html

@edwardkareem6446 2 жыл бұрын

Today I felt like my steering was kind of loose when I drive fast into a soft curve it feels like the truck moves to the left or to the right I didn't notice that my sway bar had moved to the left because I could see dark black so I'm thinking it could be my sway bar bushings are worn out

@EasyFixShaun 2 жыл бұрын

You should be able to do a quick wiggle test on bushings and links while on the ground on a level surface. If you find any play, replacement of the loose parts is needed. For best inspection results also lift the wheels off the ground safely, shake and inspect all other steering and suspension components for excessive play. Same thing, all loose components must be replaced. This should be done for front and rear. I hope that helps 😃🔧

@luisponce1472 Жыл бұрын

Will This make My Ride alot Smoother when going through Speed bumps

@EasyFixShaun Жыл бұрын

Yes. Especially if they are loose and loud. Not having that clunk would be a game changer 😀🔧

@JeffreyThomas-yc3lr 2 ай бұрын

Could you do a video diagnosing all of the front end clunking noise possibilities for a rwd truck?

@EasyFixShaun 2 ай бұрын

Sure can. Thats a great idea! What particular kind of truck do you have?

@JeffreyThomas-yc3lr Ай бұрын

04 ram 1500

@EasyFixShaun Ай бұрын

I will do that video. Gonna take me a while. But I will do it. In the mean time any luck finding a video on youtube that will help you?

@JeffreyThomas-yc3lr Ай бұрын

@@EasyFixShaun no, I’ve replaced all 4 control arms and struts and outter tie rods. If the sway bar links don’t shut it up then i might replace the knuckles and rack/pinion.

@EasyFixShaun Ай бұрын

A for effort man! Sometimes when you can't pinpoint the problem and you want to solve it throwing parts at it is a great last resort. Cars are stubborn and hard to diagnose sometimes. Sorry you are having trouble. Another option is a chassis ear. They will find any sound. You just have to test things until you find the problem. Here is a link, I do make a small portion from amazon. I have one of these and they will make you the expert 😃 amzn.to/3zd0QUn

@DwayneDelacruz 5 жыл бұрын

Hey brother, I had a question...are we supposed to add grease to the bushing also? I saw other videos where they add grease...just wondering, because I'm going to install one of these on my truck today. Thanks in advance man! 🙌

@EasyFixShaun 5 жыл бұрын

*_Hey man. I would install dry only, no grease. Standard procedure. Grease won't help in the long run. I did try it one time and about a couple months later it created a horrendous noise. They put em in dry from the factory so that is what I stick to. Let me know how your project goes!_*

@DwayneDelacruz 5 жыл бұрын

@@EasyFixShaun Ahh okay, thanks man!! I want to do a video on it, so I don't want to give people the wrong information and something happen to them. I really appreciate your response man! I subscribed and liked! 😀

@EasyFixShaun 5 жыл бұрын

Ya man no problem. Put up a card for me in your video if you want to. Either way good luck on your video!!

@DwayneDelacruz 5 жыл бұрын

@@EasyFixShaun for sure man!

@truthalways247 Жыл бұрын

Can I use the same kind you purchased or do I need to get a different kind to fit my 2019 Jeep Cherokee Trailhawlk...???

@EasyFixShaun Жыл бұрын

Any brand will work. Usually it is worth the extra effort though to get " "oem" bushings. They usually fit slightly better and last the longest under almost all circumstances 😀🔧

@truthalways247 Жыл бұрын

@@EasyFixShaun Awesome! Thanks so much for the clarification 😇👍. Keep up the good work on your videos.

@EasyFixShaun Жыл бұрын

Thank you!!

@lexusfan100 4 жыл бұрын

Do u have to raise the cat up. Can u do it without raising car up or.removing tires (if those bolts r easily assciable)

@EasyFixShaun 4 жыл бұрын

Great question. You don't need the weight off the vehicle. The sway bar doesn't hold weight up. So you can replace the parts while on the ground. I have done it many times in the driveway. 😀

@jon_918 10 ай бұрын

Did you eyeball it when reinstalling the bush? Because my Honda has paint/ markings on the bar....

@EasyFixShaun 10 ай бұрын

Yup i eyeballed it and matched up the new bushing positioning to the witness marks from where the old bushings were mounted on the bar 😀

@vincentvanderbilt5598 Ай бұрын

Hey Shaun, Im a new subscriber to your channel. A little background of my vehicle, I was side swiped on my my rear bumper panel and the wheelbearing was also out, it started to make a loud noise. Car was dropped off to get it fixed, a new bearing installed and now the noise disappear. However, 3 weeks into driving the vehicle again, I started to hear noise from my passenger side, started making a noise on every bump it encounters... my question is do you think 10 years powertrain warranty will replace bad struts, bushing, sway bar links, shock absorbers or any other things that causes it to make a noise? Also got this brand new 2023 kia soul last year and the car only has less than 15k miles within 2 years of ownership. Is there any way I can send you a quick video to determine why causing the passenger side suspension to make noise it makes everytime I go over a small bump or big ones?? Your kind thoughts would be much appreciated.

@EasyFixShaun Ай бұрын

Hey man! No problem, post a youtube video on your channel and let me know when you did and I will gladly check it out. The warranty question should go to the dealer. Depends on your warranty length and what is covered. If it's under warranty those components would be covered most likely. In the mean time also check out my other superior sway bar link video and try the hand shake test on links and bushings. The shake and sway test also helps point towards links and bushings if you can't get them to make noise by hand. 😃 kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html

@axenz1 4 жыл бұрын

Nice, do you recommend rubber grease?

@EasyFixShaun 4 жыл бұрын

Thanks! No I wouldn’t use any grease. It’s best to install them all dry just like the factory does it when new. I have tried grease a long long time ago. After a month or two the grease washed out or dried up and the worst squeak noise developed. I had to replace the bushings again.

@andredesousa96 4 жыл бұрын

The problem with using grease on the bushings it's that because of it's "jelly glue" nature it will trap all kinds of dirt and sand in it, making the bushing go out prematurely. Maybe a tiny tiny dab of grease where it meets the sway bar wouldn't hurt, but make it Lithium grease. By the way, great video!

@EasyFixShaun 4 жыл бұрын

Thanks man! I still say zero grease unless you want problems. But if it works for you I can respect that too 😃

@mikefaith7741 4 жыл бұрын

What can cause a sway bar link to keep going bad? I end up having to fix my sway bar link and left strut. Once fix it started driving smooth again but now it's coming back I could feel that it's coming coming back. What can be causing the sway bar link to go? (2011 Rav4)

@EasyFixShaun 4 жыл бұрын

What part manufacturer do you use. It could be a crappy part. That’s my first thought. I’ve used the cheap ones in some situations. They are good for a year or two usually. How long before they go bad for you?

@ToddTinley 4 жыл бұрын

@@EasyFixShaun My Honda Accord broke new front sway bar links every 4 months. I was using Moog links every replacement. I replaced them 3 times in the last year I had the Accord. I'm glad someone crashed into me and totaled the vehicle. Then, I used the insurance cash to buy a Toyota Camry. But the Camry needs new Struts. I'm using new KYB Struts & MEVOTECH Stabilizer Bar Links . Hope it lasts a few years.

@jerrycollins7694 4 жыл бұрын

No bump until I replace bushing

@EasyFixShaun 4 жыл бұрын

Ok. I wonder if the bushing size is incorrect?? Sometimes certain manufacturers put different size bars on the same car based on engine size or equipment. For instance some will have a 17mm a 20mm and a 22mm bushing that fits the same car dependent on the bar it is equipped with. The sway bar and sway bar bushing need to match. The bushing could be too big. Can you shake the sway bar and feel any play in the bar? That’s were I would start to try and sort out what happened.

@abdulazizel-feky5169 4 жыл бұрын

Thanks u for this great video One question plz Should i have to change the Stablizer bushing + the bracket ?! Or i can change only the stablizer bushing and use the old brackets?!

@EasyFixShaun 4 жыл бұрын

Thank you! Yes you can reuse the old bracket with no problems.

@abdulazizel-feky5169 4 жыл бұрын

Thanks buddy

@hoseinnajafi1988 3 жыл бұрын

Inside the slotted bush should be used greased locks to work better

@EasyFixShaun 3 жыл бұрын

No grease should be used. Install it dry. That is how the manufacturer designed it and installs them when new. I tried greasing a couple times. Once the grease drys out the most most horrific squeek noise started and I had to replace the bushings again.

@mikexcanxjerk 4 жыл бұрын

Hi , Question can getting new sway bar bushings improve overall ride quality and smoothess ??

@EasyFixShaun 4 жыл бұрын

Hi Mike. Good question. If the bushings are worn and making noise yes. If they are working properly no they won’t help in that department. Probably shocks and struts would be your best bet to improve overall ride and handling. I recommend kyb brand. They are excellent.

@mikexcanxjerk 4 жыл бұрын

Easy Fix so far ive change my struts have done the complete strut assembly ~ KYB // I have change my lower control arms complete even with new ball joints ~ Moog // still my car doesn't feel stable/planted the way I would want , what else contributes to a much smoother and stable ride ? What about sway bar end links ? Do they play a role on that department?

@EasyFixShaun 4 жыл бұрын

Ok sounds like you have replaced a lot of parts. Did you have an alignment done after the strut replacement? Is your air pressure correct in the tires. Those can be major factors. If those things have been checked and are good the next thing I would check for is a broken or loose part. A broken sway bar link will cause a lot of instability.

@mikexcanxjerk 4 жыл бұрын

Easy Fix yes I did I actually had Toyota dealer do the struts and yes I did get the alignment and yes I do monitor tire pressure , however does tire brands makes a difference in ride quality ? Currently riding on some Hercules brand , don't know if certain tire brands contributes to butterry smooth ride ... I have a 2013 Camry se , in your opinion which is better for Toyota or in general ~ continental or pirelli ?? I I've been thinking to replace the endlinks , if I do , should I do all 4 or just the front two ~ FWD , then later the rear ??

@EasyFixShaun 4 жыл бұрын

Ok. You are on the right path. You’ve eliminated most causes. I would do the tires next and hold off on the links unless they are loose. You would be amazing at how nice a car will ride with new tires. If you modify the sidewall to a thinner side wall. The ride will significantly be harsher. If you want butter smooth get a stock sidewall if you can. I think either of those brands work just fine. Let me know how it goes😃

@gramtec 4 жыл бұрын

Man , you could have made us listen to the noise that was comming of possible. Lot of people would have identified that sound and could understood this was the problem they all had. Its just a suggestion. But it is a great video thougj

@EasyFixShaun 4 жыл бұрын

Thanks man. I should have. I apologize. I do have a bad sway bar link and the sound is sumiliar but a little more dampened. I will work on one for you.

@gramtec 4 жыл бұрын

@@EasyFixShaun thanks Man. Man Should never apologise for such a Great Helping Video.

@EasyFixShaun 4 жыл бұрын

Thanks man! It’s fun to help out. Easy to miss things along the way though for sure. I’m definitely trying to get better with each video. Thanks a lot!

@josephgarcia3767 3 жыл бұрын

Is there a torque specification for those bolts?

@EasyFixShaun 3 жыл бұрын

There is. You should be able to google that for your year make model and engine of vehicle. 😃🔧

@DStrayCat69 9 ай бұрын

Could you Please tell me the distance (Center to center) of those bolt holes...??? I just swapped out the original bushings for a set made by Moog. The bolt holes were wrong. I had to drill them out and cut off a piece of the strap to make them "Sort of" fit. I have been looking at that very set, which you installed, but No one seems to be able to tell me what I need to know... No one in Amazon would reply to my query... Sheesh! Please help... 🙂

@EasyFixShaun 8 ай бұрын

I wish I had the specs for you but I don't I am sorry. That info has to be out there, but it's not super common to look up bushings or bushing straps with that information. You could order the amazon Dorman bushings somewhere, measure and return them to get the specs if you are in a pinch....? 😃

@SPAZTICCYTOPLASM 4 жыл бұрын

Where do you live where a 2015 vehicles bushings wear out this quickly? My 2003 corrola has this problem but that's a 16+ year old car in salty Canada.

@EasyFixShaun 4 жыл бұрын

Corolla’s are bullet proof! I live in Michigan. Rustiest place on the planet.

@SPAZTICCYTOPLASM 4 жыл бұрын

@@EasyFixShaun "Corrola's are bullet proof" You can say that again, i have a 97 with over 320,000 km on it, and a 03 hitting 290,000. And yea I've heard Michigan rust is bad, i feel for you. Happy wrenching.

@EasyFixShaun 4 жыл бұрын

Sweet rides man love em! Happy wrenching!

@lukaszM46 11 ай бұрын

when removing the sway bar links or the sway bar bushings, should the suspension be at ride height or can i just jack it up, let the suspension extend all the way and remove the bolts?

@EasyFixShaun 11 ай бұрын

Can be at ride height or full suspension droop. I would make sure suspension side to side is basically level either way or you could fight with it a bit from the twisting spring action of the spring steel bar. Here is another video that explains it better if you need it 😃 kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html

@lukaszM46 11 ай бұрын

@@EasyFixShaunthanks for the quick reply! i have an issue where something is squeaking when driving straight, but as soon as i start turning either way (even slightly) it goes away. I was thinking it's some suspension/steering component that gets under load when turning (removing the slack under load) but is not under load when going straight.

@EasyFixShaun 10 ай бұрын

Could be anything. Check the brakes also 😀

@lukaszM46 10 ай бұрын

@@EasyFixShaun i fixed it a while back, turned out to be a stuck brake pad, i cleaned it off and the caliper bracket with a file and its good now.

@EasyFixShaun 9 ай бұрын

Excellent job sorting that out! 😃😃

@harryisaac1273 5 жыл бұрын

i have one of these bushes on the inside rear of my suspension arm but it doesnt have a split down the middle and im having a hard time getting it off is their a special tool for this

@EasyFixShaun 5 жыл бұрын

What year make and model vehicle do you have? Front or rear?

@harryisaac1273 5 жыл бұрын

@@EasyFixShaun sorry My vehicle Toyota Cynos 96 front

@harryisaac1273 5 жыл бұрын

@@EasyFixShaun TOyota Cynos 98 and its on the suspension arm

@EasyFixShaun 5 жыл бұрын

Sorry for the delay. I have been missing messages lately. My bad. Do you have a Celica? I have never heard of a Cynos.

@harryisaac1273 5 жыл бұрын

problem solved new bush had a split old one none burnt them off replaced with new ones passed warrant and it is a Cynos

@kitt23NY Жыл бұрын

Does the car have to be in the air or on jacks to determine if the bushings are bad?

@EasyFixShaun Жыл бұрын

No, if you can access them you can shake them down and look for play. As long as the vehicle is level there should not be any pressure on them and play will be detectable if it is present. Here is a new video I made on links and bushings and sway bars in general if you need more information 😃 kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html

@ricardojuarez291 4 жыл бұрын

I just replace the ones in my GMC Acadia but now it seems like I have no suspension it all, every time when I pass by bumps it's too hard,.. what I did wrong?? Maybe it needs to be greased??

@EasyFixShaun 4 жыл бұрын

Hard to say. But you may have another issue. If the links are tight and the bushings are tight after your repair I would look for other things. Usually the links and bushings are either good or bad. So if they are tight I would look at other suspension components like maybe struts. When all else fails start at square one and recheck everything for looseness in the steering and suspension. Sometimes its easy to accidentally miss something. Stick with it you are on the right track. Sounds like maybe you will just have an extra step to do, to get it repaired.

@robmohi1734 3 жыл бұрын

Thats so easy, save me some money

@EasyFixShaun 3 жыл бұрын

Usually they are pretty easy. Corrosion is typically the only thing that makes it difficult.

@ricardojuarez291 3 жыл бұрын

@@EasyFixShaun you know what I ended up taking the off, and add silicone grease and they just work awesome... I recognize my mistake 😂...

@EasyFixShaun 3 жыл бұрын

I’m glad you got your a fixed 🙂

@cassanix9093 2 жыл бұрын

Hey there, are the bushings make and model specific?? Or can I purchase ones that look like yours?

@EasyFixShaun 2 жыл бұрын

You want to order them for your specific year make and model. They are all slightly different 😀🔧🔧

@cassanix9093 2 жыл бұрын

@@EasyFixShaun thank you!

@squirrelattackspidy 2 жыл бұрын

Other than a clunk, what problems will I have with loose sway bar bushings? Thanks!

@EasyFixShaun 2 жыл бұрын

Usually they wont cause breakage in any way. There will be annoying rattle and clunk. It does play a big part in the stability of the vehicle so there may be a loss there also. I hope that helps 😀🔧

@squirrelattackspidy 2 жыл бұрын

@@EasyFixShaun If those bushings are worn, do you think it would help with overall stability on the highway when changing lanes? Mine are worn and it feels like I'm driving a boat on the highway. I probably need to get new struts as well, but wondering if it would be worth doing those bushings first.

@EasyFixShaun 2 жыл бұрын

@@squirrelattackspidy It is possible it could help to replace the bushings if they are worn with that problem. I would look more into it and check all suspension and steering components though to make sure there is nothing else that could be loose and worn😃🔧

@squirrelattackspidy 2 жыл бұрын

@@EasyFixShaun With my old car, it's about as loose and worn as I am. :P I

@EasyFixShaun 2 жыл бұрын

Haha 😂

@callmebackfriday2 Жыл бұрын

What is the reason the bad bushing (loose) cause clunking noise? What metal to metal it is hitting. I looked at the sway bar and it goes to sway bar link and strut but it wasn't hitting any metal? I have changed sway bar link (leak), outer tie rod (leak) but noise still there. I checked ball joint , control arm and strut there is no leak and it seems fine. I think it may be the bushing but it looks ok and no play or loose but it has 190k on it and almost 13 years. Th e clunk noise only when car slow down or slow start up or turning. Other than that, car runs ok. No noise. I think it may be the sway bar bushing. Thanks for the video.

@EasyFixShaun Жыл бұрын

No problem! The clunk from sway bar bushings is very much like a loose link, except bushings have a slightly noticeable rubbery clunk. Sway links sound more like a metal clunk. It is a very subtle difference, but it is there if you have a good ear. Any part of the sway bar system that is loose causes an amplified noise. That is because the parts are hooked directly to the body/subframe/or frame of the vehicle. They sound louder than you would think they could ever be for such little clunking movement in the parts. Through process of elimination is nothing else is loose and you have higher mileage, and you can not pinpoint the cause, bushings is a great guess. Plus they are one of the cheapest repairs on the car. I see a mysterious clunks from bushings once in a while like you describe. Probably worth a shot if you can not pinpoint the problem and everything else looks ok 😃🔧

@callmebackfriday2 Жыл бұрын

@@EasyFixShaun Thank you so much for your explanations. I will update later whether it is bushing. By the way, that little noise drives me crazy.

@ironfistarrival 4 жыл бұрын

The car needs a good rust cleaning and a thick Anti rust under and around it .

@EasyFixShaun 3 жыл бұрын

Yup 😃

@klasek29 2 жыл бұрын

I am gonna try this. I have replaced basically everything in the front end besides the sway bar bushings and lower control arms and i would not like to tear a bunch of shit apart again

@EasyFixShaun 2 жыл бұрын

The make a bunch of noise sometimes and also it is hard to find at times. Most times you can feel a clunk right in the bar. There are times were you can not feel the clunk by hand but it winds up being a link or bushing. Sometimes they are very sneaky. Its probably worth a shot. Plus they are relatively cheap 😀🔧

@klasek29 2 жыл бұрын

@@EasyFixShaun i hope thats what it is! I replaced the links already

@EasyFixShaun 2 жыл бұрын

Good luck! If that doesn't do the trick, keep going and start from step one and try to locate the noise again. The goal is to pinpoint to culprit. If you exhaust that method- Plan B. Plan B is replacement of parts even if they are wrong in an attempt to repair. Since Plan B is a guess, start with the cheapest and easiest parts first 😃🔧

@klasek29 2 жыл бұрын

@@EasyFixShaun i have a question. If i was driving on bad sway bar bushings. Do you think that might have damaged the shocks?

@klasek29 2 жыл бұрын

I just replaced them 2 months ago

@MusicRepostz Жыл бұрын

Can i replace the rear sway bar bushings without the car jacked up?

@EasyFixShaun Жыл бұрын

Yes you can. You want to make sure the suspension is level on the axle you are working on or the bar will have spring pressure in it. (It is always trying to level the suspension side to side). This could make disassembly dangerous and reassembly very difficult. Basically you will be fighting the bar if the suspension heights side to side are not level. Here is another video I made with more information for both the bushing and the link 😃🔧 kzfaq.info/get/bejne/ZrlofaWWxNDSZps.html

@travisk1487 5 жыл бұрын

I have a 1993 buick lesabre that doesnt make a clunk, but it does make a tambourine- like noise coming from the front left wheel - Incidentially It needs sway bar link bushings. Im going to replace sway bar bushings too all around.

@EasyFixShaun 5 жыл бұрын

That tambourine sound could be a broken Coil spring on the strut or upper strut mount bearing may be bad. Somewhat common on those I think. Hard to diagnose from here but defineatly shake everything down and try to pinpoint your noise. Keep me posted!

@travisk1487 5 жыл бұрын

@@EasyFixShaun Im thinking its the bushing links. I saw visible play in the bushing when i inspected. so makes sense. also old owner replaced struts all around so im hoping its not that.

@EasyFixShaun 5 жыл бұрын

Oh ok. Yes the links have a high failure rate. If those are loose that’s the best place to start for sure! Nicely done sir!

@Xiferr 5 жыл бұрын

@@EasyFixShaun Thank you, but sadly it did not fix the issue.

@EasyFixShaun 5 жыл бұрын

Bummer! I am sorry. It happens to the best of us. When in doubt start all the way over at step one. Shake it down and try to pinpoint the problem. Please keep me updated!

@Shorty40101 4 жыл бұрын

I just got my changed but still squeaking does it do that till they ware in or

@EasyFixShaun 4 жыл бұрын

Usually the bar doesn’t squeak at the bushings from my experience. Wet them down with water and see if the squeak stops. I would tend to think of the bar is squeaking at all it’s a dry sway bar link ball joint. They are usually not guessable and when they dry out I have had noise from the links.

@Shorty40101 4 жыл бұрын

Easy Fix is it bad or good ? If it still does squeak

@EasyFixShaun 4 жыл бұрын

If it squeaks something is wrong. There could be lubricant on the rubber or something. The bushings are soft and designed not to squeak. So I doubt they are squeaking. But anything can happen, double check them. Try to pinpoint the squeak and go from there.

@bodokerivers9695 Жыл бұрын

Hey, so my honda was making a sound like an old door with not oil, I changed the sway bars and it went away for a while, then it came back, it been having it for a while that sound, I finally decided to try to fix it and thought it would be the sway bar bushing, I just changed them today and the sound is still there, and also just extra info, whenever I have more weight in thr front, like driver and passenger the sound sounds more, you can also hear it whenever you get out thr car, or whenever you push thr car down, it sounds like an old door with no oil, and also is weird, whenever it rains and I drive by puddles and water goes inside the bottom of the car, the sound stops, is weird, what do you think the problem is?

@EasyFixShaun Жыл бұрын

Sounds like a steering or suspension problem most likely. I would check all components. Your description is really good though. I would check the upper and lower ball joints. That would be the most likely cause from what you describe. You could have someone jounce test the car in park to get some suspension movement and squeaking and then try to track down the noise. Usually a squeak like that can be felt in the ball joint just by touching the control arm that it is mounted in, or the ball joint it self. If you find that is the case you can further isolate the problem by piercing the boot and adding grease. Usually the noise will go away. Ball joint would need replacement 😃🔧

@bodokerivers9695 Жыл бұрын

@@EasyFixShaun really appreciate the info thank you, will do check them, the ball joints are hard to change, how much you think a mechanic charges, it can bell the ball joints or also the shock absorbers

@autumnntimmy4280 4 жыл бұрын

I don't hear clunking going down a bumpy road. I only hear like a clunking/popping noise when I make a turn. Left or right. I have a 2011 GMC Acadia. Help!

@EasyFixShaun 4 жыл бұрын

Does your clunking only happen when turning and also applying power?

@autumnntimmy4280 4 жыл бұрын

@@EasyFixShaun No I don't have loss of power. Just the noise.

@EasyFixShaun 4 жыл бұрын

Sorry. If the clunk sound is heard when applying power straight or a clunk is heard in a turn while applying power, it is usually a Cv- joint on one of the shafts. If you hear the noise when turning all the time even when coasting I am more likely to think a suspension or steering component. If you can't really tell try eliminating things as a good approach to pinpointing the culprit. Do you know how to lift and support the Acadia and do a shake down test? You could do that and check for loose steering/suspension components. Then check your sway bar links and bushings. If everything is tight you could then start looking at drivetrain components like the cv-axles.

@samuellugo9733 4 жыл бұрын

Whenever i pass a big whole or deep puddle i feel like a clunk juston my side is it normal for a 2019 GMC 3 inch suspension beaaly have2 months whit the lift

@EasyFixShaun 4 жыл бұрын

Hi Samuel. It could be anything loose under there with the lift kit. Under normal circumstances the bushings and links can be highly suspect parts. They fail a lot. But you should always do a shake down test of your suspension to try to pinpoint a loose part. Sometimes it jumps out at you. Do you know how to do that?

@samuellugo9733 4 жыл бұрын

@@EasyFixShaun no sir can you please send me your number or Gmail please for more information

@EasyFixShaun 4 жыл бұрын

I wish I could give you my contact info man, ...but its the internet so that's a hard no. But I can try to walk you through it here. Or you could have it done at a shop and pay the diagnostic fee. Or...My next video coming out this week shows how to do it pretty well. It is a wheel bearing video but I shows it pretty clearly. Or you can follow this old video I showed how to do it here. kzfaq.info/get/bejne/jNBpoqd5z5mpmn0.html Basically between this video and the sway bar video you have all the basic tests to expose a loose steering or suspension or bearings component. 😀

@leokennedy4894 3 жыл бұрын

Samuel Lugo had the same issue and it was fixed with new struts and shocks.

@samuellugo9733 3 жыл бұрын

@@leokennedy4894 yeah i did that

@user-qq6ep9os1p 4 жыл бұрын

👏👏👏👏👏👏❤❤❤

@EasyFixShaun 4 жыл бұрын

😄🤝

@user-rw9oz8bo5i 4 жыл бұрын

Молодец

@EasyFixShaun 3 жыл бұрын

Огромное спасибо. Извините, что так долго не отвечал. Ты обалденный. Я просто смотрел свою ветку комментариев и понял, что никогда не отвечал вам. Хорошего дня!

@user-rw9oz8bo5i 3 жыл бұрын

@@EasyFixShaun вы тоже удач

@EasyFixShaun 3 жыл бұрын

Спасибо. С Новым Годом!!

@hoseinnajafi1988 3 жыл бұрын

If you use anti-lock grease (anti seize), it will not dry and will not sound Because this type of grease does not penetrate water and soil and does not dry and does not clean over time

@EasyFixShaun 3 жыл бұрын

You should try it and see how it works out long term. I would never recommend it under any circumstances on the rubber/plastic sway bar bushings. Bushings are the wear component and designed to wear. If you lubricate them you will have noise and you will have to replace them again to fix that new noise.

@barron4000 4 жыл бұрын

Could a rear wobble at low speeds be bushings?

@EasyFixShaun 4 жыл бұрын

By wobble to do you mean a rattle over small choppy bumps?

@barron4000 4 жыл бұрын

Easy Fix .. it turns out rear wheels were worn.. thanks

@EasyFixShaun 4 жыл бұрын

I am glad you found the problem! Nice work.

@antonello7349 10 ай бұрын

Ciao scusami siccome ti vedo abbastanza competente e professionale posso farti una domanda? Volevo csmbiare i gommini della barra stabilizzstrice siccome gia li ho ordinati pero sono da 22diametro interno, ho misurato la barra invece è da 23 potrebbe darmi qualche problema oppure potrebbe andare lo stesso? Grazie intanto ti seguo 😊

@EasyFixShaun 10 ай бұрын

Could work just fine as long as the straps and bolts fitment is good. Usually the manufactures don't change bar size by just 1mm, so you probably have the correct parts. Usually if two optional bar sizes are available on a vehicle the change in size is 3-5mm difference or more 😀😀

@antonello7349 10 ай бұрын

@@EasyFixShaun Grazie mille mi hai dato una risposta da professionista, comunque poi alla fine ho fatto il reso e messo quello giusto da 23 di nuovo grazie🙏

@EasyFixShaun 9 ай бұрын

Nessun problema. Vi auguro una buona giornata! 😃

@foldzan1 5 жыл бұрын

On a 2015 model year... Really GM?

@EasyFixShaun 5 жыл бұрын

Ya I thought the same thing. A little early to be needing bushings. But I haven’t seen another needing them since. Hopefully it was just a fluke...

@hoseinnajafi1988 3 жыл бұрын

If the inside of the slotted liner is not greased, the anti-roll bar will get stuck and will not transfer power to the other side of the car.

@EasyFixShaun 3 жыл бұрын

@jerrycollins7694 4 жыл бұрын

replace sway bar bushing and link and got a bump,bump on driver side

@EasyFixShaun 4 жыл бұрын

Where the parts loose before you replaced them? Is the bump bump noise the same as before replacement?

@bradleyporter5454 3 жыл бұрын

Nice chrome impact socket lol

@EasyFixShaun 3 жыл бұрын

Ya not the best idea. But I do it all the time. I have shattered quite a few impact and non impact sockets. The one in the video is probably 25 years old. It is from my original craftsman socket set when I was a kid. Made in the USA. They are still stronger than chinesium made replacement sockets I have recently purchased.

@mistyssidemeattreat9498 3 жыл бұрын

Smartass