Sway Bar End Links and Bushings | EASY HOW TO REPLACE

Sway Bar End Links and Bushings | EASY HOW TO REPLACE | Mercury Ford Lincoln

Рет қаралды 4,336

Күн бұрын

Thanks for stopping by, I appreciate you!
I am glad you chose to watch my channel and my videos. Please consider subscribing to the channel and liking the videos if you found them helpful. Please add any additional info on the matter. We are here to grow together and help each other out.
#mercurygrandmarquis #swaybar #bushing #howto #lovewhatyoudrive #crownvic #lincolntowncar
The tool box is out, looks like we are working on something today.
I show you step by step on how to replace sway bar end links and sway bar bushings on this 2006 Mercury Grand Marquis, Ford Crown Victoria, Lincoln Town Car. Easy to follow instructions with basic tools. So easy you can do it yourself! I believe in you. Save a ton of money by doing it yourself.
Buy me a coffee here:
www.buymeacoffee.com/lovewhat...
Parts:
Duralast Front Sway bar Bushings- HB200165
Alternative Part Number-FB200165
Alternative Parts for Purchase:
LINK TO BUY:
Moog Sway Bar Bushings
amzn.to/3W8iIW8
DRIVE-WORKS STABILIZER BAR END LINKS-DW-K80140
Alternative Part For Purchase:
LINK TO BUY:
MOOG K80140 Stabilizer Bar Link
amzn.to/3QJ8HxF
Tools:
15mm socket and ratchet
17mm socket and ratchet
17mm open end wrench
18mm socket and ratchet
18mm open end wrench
7mm socket
PB Blaster Penetrating Spray
Rag
Time-:
60-120 minutes (with prep work.)
Other Videos:
New Jersey Classic Car Show 2022 Lakewood NJ Ford Dodge Chevrolet Plymouth Pontiac Hot Rod Gasser:
• New Jersey Classic Car...
BEAMTECH LED HEADLIGHTS (H13/9008) UNBOXING:
• MERCURY GRAND MARQUIS ...
TorchBeam LED Install Part 2:
• Mercury Grand Marquis ...
TorchBeam Led Review/Driving Part 3
• Mercury Grand Marquis ...
TorchBeam LED Part 1 Unboxing:
• Torchbeam T2 H13/9008 ...
My 2006 Mercury Grand Marquis LS Walk Around Honest Raw No Edits Review & Intro "The Good Bad Ugly":
• 2006 Mercury Grand Mar...
How to Change Transmission Fluid & Filter (Easy Pan Drop) Mercury Grand Marquis Ford Crown Victoria:
• How to Change Transmis...
Mercury Maintenance:
• Mercury Grand Marquis ...
Mercury Throttle body cleaning:
• 2006 Mercury Grand Mar...
How to install rear sway bar:
• Mercury Grand Marquis ...
Replace front brakes and rotors:
• How To Change Front Ro...
Install Throttle body spacer:
• Mercury Grand Marquis ...
Rear bumper tuck, Panther Body:
• Crown Victoria/Mercury...
A/C Accumulator Replace:
• A/C Accumulator Repla...
Recharge A/C system:
• How to recharge your c...
How To Install Rear Shocks Absorbers:
• HOW TO REPLACE REAR SH...
The Mercury Gets OEM 2003 Lincoln 17 Inch Wheels:
• How to Change Transmis...
WARNING: This video is only for entertainment and information purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. DIY but always think ahead, and remember that every project you try is at YOUR OWN RISK.
Love What You Drive Instagram:
/ lovewhat_youdrive
Love What You Drive Email:
Lovewhatyoudrive28@gmail.com
PLEASE CONSIDER SUBSCRIBING, LOKING, SHARING, COMMENTING
THANK YOU SO MUCH!!

Пікірлер: 41

@midas617 Жыл бұрын

When I did my GMQ before I sold it a few years back, I just removed the sway bar brackets and lowered the bar while still attached to the end links. removed old bushings by cutting them with a razor knife. and installed new ones with slit, over the bar. and then I proceeded to replace the end links. When I did my Town Car. I had to remove the sway bar completely, because I bought the Motorcraft bushings and had to be slid in. I just wiped down the bar and sprayed it with some silicone to help the new bushings slide into place. Since we're on the subject of Sway Bars. the best mod I did to my GMQ, when I had it, apart from the dual exhaust that I got off a 2011 police interceptor. was getting the front and rear sway bars off of the same car. It made the boat handle like if it was on rails without compromising the ride quality since I didn't mess around with shocks or the springs at the time. it just made the car corner flatter. all I have to say is oof! from 15mm to 17mm in the rear and 28mm to 29mm in the front. world of difference and under 100$ dollars.

@LoveWhatYouDrive Жыл бұрын

Thanks for sharing, those are awesome tips! That was my whole idea in the beginning was to grab some p71 sway bars. But then I didn’t come across any and out it on the back burner and forgot. I will look for some and swap mine out! Thanks I appreciate it.

@melvinharris7859 Жыл бұрын

Man, I must have it pretty bad then. My 2007 GMQ GS rolled out of STAP with no rear sway bar and a 26.5mm front sway bar, and that's what it has to this day. Plan on upgrading the bars once I can find some.

@LoveWhatYouDrive Жыл бұрын

Adtr Performance sells them but they are around $200 bucks! I hear nothing but good things about them! I’m not sure I can justify $200. I’ll keep my eyes peeled for p71 or used one or something

@melvinharris7859 Жыл бұрын

@@LoveWhatYouDrive The ADTR bars are a lot bigger than the P71 bars and imo too thick, they seem to cause poor traction over rough surfaces. The P71 bars are the best bet I think.

@LoveWhatYouDrive Жыл бұрын

I agree 💯 I don’t race my Mercury nor it does autocross so all the extra performance parts is not needed for my application.

@Pantherforlife 5 ай бұрын

You help me out big time by not removing the whole sway bar. Already have new end links. I just inspected the rubber bushing and regrease it. And put the bracket back on. Once I hear a lot of clunking then I'll change them. Thanks for showing this thumbs up.

@LoveWhatYouDrive 5 ай бұрын

I appreciate the kind words, I’m glad it helped! ✌🏼

@PanzerPlatform Жыл бұрын

Yo Art, This is the best step by step tutorial I've ever seen of sway bar parts on a Panther car. Better than 1A Auto videos. Lol Good work, and good job. -Chuck

@LoveWhatYouDrive Жыл бұрын

Chuck, You’ve done it again! You left the first comment..kudos. Up next “how to install courtesy lights where there were no courtesy lights” (this won’t be the title I promise 😂)

@PanzerPlatform Жыл бұрын

@@LoveWhatYouDrive If you want you can make an April Fools video this year. "How To Replace Door Panel Courtesy Light Bulb" Lol

@LoveWhatYouDrive Жыл бұрын

lol that would be clever I’ll write it down, it will throw people in a loop

@TheBarth79 Жыл бұрын

Hi Chuck.

@PanzerPlatform Жыл бұрын

@@TheBarth79 Yo Barto.

@ezequielcuriel9700 Жыл бұрын

Nice job 👍 my friend 😮

@LoveWhatYouDrive Жыл бұрын

Thank you for stopping by !

@naser5436 Жыл бұрын

Great job 👍🏼👍🏼👍🏼

@LoveWhatYouDrive Жыл бұрын

Thanks again! 🙌🏼

@al-mubdizahir8704 6 ай бұрын

MY 2000 does the same exact thing

@57fire Жыл бұрын

Pro tip, cover the end of the new sway bar link with plastic dip the drush on kind and it will keep it from rusting on. Replacement in the future will be easier.

@LoveWhatYouDrive Жыл бұрын

Thanks for the tip!thanks for stopping by!

@melvinharris7859 Жыл бұрын

Good video. One thing to note, your sway bar end links look to have been replaced before, none of the suspension components on these had grease fittings from the factory. The factory end links also wouldn't have had that spot to hold it with a wrench while loosening the nut, rather they have an opening for an allen key at the end of the stud. Utilizing this to hold the end link still while turning the nut requires removal of the brake rotor.

@LoveWhatYouDrive Жыл бұрын

Ye that’s what I figured. I don’t think they used moog products from the factory as well. From what I understand and heard many times is that the suspension and end link parts go pretty frequently on the panthers! Thanks for chiming in!

@sambarton202 10 ай бұрын

I've not heard of dw brand, moog great products if greased each if not every 2 oil changes, just enuff until a little squirts out from under boot

@sambarton202 10 ай бұрын

Good video but dont forget torque specs sir

@LoveWhatYouDrive 10 ай бұрын

I agree 💯 I need to improve

@chrischery8994 Жыл бұрын

You said look at your durty hands but please use gloves, for me i use loves at all times when doing something on 08 grand marquis, good job and will the same thing because I also heard the clunking nose and thanks

@LoveWhatYouDrive Жыл бұрын

Thanks for stopping by, I appreciate you!

@johnnycash2860 4 ай бұрын

I just finished replacing the sway bar end links and the sway bar bushing and my 2007 Lincoln Town Car is still making a squeaky sound. I recently replaced the brakes, the upper and lower control arms, the struts, and the rear shocks. What can it possibly be?

@LoveWhatYouDrive 4 ай бұрын

Thanks for stopping by! Did you preload the control arms and suspension components before making the final tightening? Control arm bushings need to be preloaded with weight if the car or similar weight before you tighten all the way or to spec. Maybe the seating of the spring in the rubber cups if the springs (not sure the proper name) but where the springs sit in the shock towers of the body, maybe the rubber is pinched or seated improper. Maybe they need to be broken in. Those would be my best guesses to why it still makes noise. Let me know if any of that helped. Or else we can put up your question on the community tab of the channel and have people chime in on what it could be! Good luck! I’ll be waiting for your answer!

@johnnycash2860 Ай бұрын

@@LoveWhatYouDrive ok it has been 3 months and you can still hear a squeaky noise when going through the uneven pavement, I tried greasing up the hood latch, and the hydraulic component on the hood with no luck. It's driving me insane! I recently took my town car to a shop this past Saturday and the mechanic suggested greasing up the upper and bottom part of the sway bar end links, let's see how that goes. My next project is replacing the rear brakes and rotors just waiting for the parts to come in a few days.

@jakethesnake4971 Жыл бұрын

My 01 sway bar is very similar, what does the swaybar and those parts even do? 🤔

@LoveWhatYouDrive Жыл бұрын

Thanks for stopping by! Sway bar is in charge of reducing the body roll on a vehicle, when you turn the wheel the body of the car will go lean or “roll” to the Opposite side. The bar acts like a spring to control that body roll. The thicker the sway bar the more resistance there is and the less of a body roll or swaying your car will have. It stiffens the ride and reduces body roll on turns!

@benson4u215 3 ай бұрын

Made my life a breeze using an induction bolt heater

@LoveWhatYouDrive 3 ай бұрын

Thanks for the advice

@benson4u215 3 ай бұрын

Im pretty jealous of the sway bar design on yours lol, my 2000 mgm bottom nuts on the front end links are stiff from when detroit axle peens the nut head 🤣

@LoveWhatYouDrive 3 ай бұрын

@benson4u215 lol

@benson4u215 3 ай бұрын

Hopefully the watts link and rear ends easier 😅

@LoveWhatYouDrive 3 ай бұрын

@benson4u215 surprisingly so far all I’ve done on this Mercury had been pretty easy and self explanatory 🙏🏼