Swimming pool construction 20x50 vinyl liner 8ft Deep (Timelapse)

Рет қаралды 17,657

Жыл бұрын

This is a 20X50 Vinyl liner swimming pool. This pool was 8ft deep.
We are primarily a fiberglass pool company but every once in a while a customer has a vision that a fiberglass shell won't fit the bit. part of the beauty of a vinyl liner swimming pool is the ability to customize every part of it. LIKE the video and leave a comment on your favorite feature!
(Also may like)I made $200k In 26 days
• Video
features on this swimming pool
1diving board
2water slide
3deck jets
4automatic pool cover
5stamp concrete
6salt water
7LED pool lights
8LED water jet lights
(Also may like)I made $200k In 26 days
• Video
CONTACT ME for BUSINESS
Email-Jonathanportukalian@gmail.com
Phone (502) 381-8505
IG @jonport_
Tiktok @jonport_
FB Jonathan portukalian
Wetscapes FiberGlass pools site
wetscapesfiberglasspools.com/
@wetscapes
#indiana #wetscapesfiberglasspools

Пікірлер: 18

@mcfrazier5067 21 күн бұрын

Beautiful!!!! We’re getting a 20x40 build right now. How long did the building process take for you?

@jonport_ 21 күн бұрын

A build like thus should take about 4-8 weeks. It took a whole lot longer because we started it in the winter.

@joejim2963 2 ай бұрын

Beautiful pool. I am building my 20x40 right now and wondering what you do for your threaded pvc fittings to ensure no leaks in the buried plumbing like main drains, returns and skimmer bodies? Sealant or tape ? I can’t understand why Hayward and others put threaded connections on some of these parts like the main drain bodies. They need to incur some trauma to the groin for some of these designs. Just invites leaks. Lastly it looks like you have nice ground for your excavation. Do you ever encounter shale conditions sometimes where the deep end becomes rough on the slopes? How do you manage that and get a smooth pool base layed down? Thanks

@jonport_ 2 ай бұрын

You could primer the threads like you would a regular fitting and hand tighten it till it doesn’t go no more I would recommend using a medium body cement. Give you a couple more seconds a time if you need to use it to tighten it up just a little. You can’t see it but on this pool, the wall deteriorated over the winter about a foot and a half so we had a massive crater to work with. But we just use a really dry grout mix with fibers in it and keep on stacking it.

@joejim2963 2 ай бұрын

@@jonport_ thanks for responding that is very helpful. I was thinking of gluing the threaded fittings that will be permanent but wasn’t sure how it affects the threads but I suppose it just melts them all together. I just don’t want any leaks on this buried piping and was even thinking of deleting the main drains, but finally decided to go ahead and do it. That is a good tip on smoothing the slopes before the pool base goes down. I am not an expert on any of this

@jonport_ 2 ай бұрын

@@joejim2963 anytime. We’ve always glued our threaded fittings so you’re good there. we set up string lines per our dig sheet and use screed Eto make it perfect from the pool to the line. whether there’s foot and a half hole or not we fix it the same day we do the bottom. But I have a special mix design for us where we are so it just depends on what you are working with.