Swisher Roughcut casing replacement | KOAM Outdoors Reviews

Рет қаралды 5,931

4 жыл бұрын

This was due to blades locking up and had to be cleaned. The casing broke due to the blades locking up and finally hitting a rock. These mowers are designed to have swinging blades and they weren't swinging when this occurred. Still using same blades just had to loosen them. Hope this helps other before it happens to you. This was user error and has nothing to do with quality of Swisher products.

Пікірлер: 15

@janeenkahnk8689 3 жыл бұрын

it probably doesn't matter, but when you put the blade plate back, it's upside down. If you look at the picture before you removed the plate and then when you finished, it was flipped so when you were done, the blades are on top of plate instead of underneath.

@dustinray123 2 жыл бұрын

Great video!!!! Just did the same thing on my 54"!!

@joshshoemaker4809

I just had to do this on mine and I feel like there is a little play in mine after putting it all back together with the diagram from swisher and following your video…is it supposed to be really snug or is a little play normal?

@calebleetayor7330

Dang man I tried doing this while I was running and took off part of my fingers

@ryanperkins432 3 жыл бұрын

Great video bud. Have you had to replace the tire and wheel on that. If so do you know the product codes or where to find the replacements? Keep up the great work!

@user-ft3oc7ks9z 21 күн бұрын

How did you get it up on its side?

@Akrowdya64 Жыл бұрын

So I just recently aquired one of these used, but I am having a little bit of an issue. The blades will spin, but it will not cut any brush/grass.. I know the blades are facing the correct side up. I replaced the belt as well with one from swisher and no luck. A couple questions... Do you tighten the blades to the point where they don't move freely when the PTO is engaged? I noticed that when I hold the belt pulley on top and try spinning the blade plate underneath, the plate still spins freely. Is this normal?