T245 soldering station how I made one
Рет қаралды 998
5 күн бұрын#solderingstation #soldering #soldering_iron #diyelectronics
Join this channel to get access to perks:
/ @symboltech21
I built this soldering station really cheap and is really powerful, watch the video and here are all the parts you need to build one like this one!
T245 iron tip s.click.aliexpress.com/e/_Dl7...
T245 soldering handle s.click.aliexpress.com/e/_Dlq...
T245 soldering iron stand s.click.aliexpress.com/e/_Dl7...
Soldering station controller board s.click.aliexpress.com/e/_Dm6...
Power supply board s.click.aliexpress.com/e/_DFx...
DIY project case www.aliexpress.com/item/10050...
Power AC socket s.click.aliexpress.com/e/_DmD...
Power switch s.click.aliexpress.com/e/_Ddh...
Following my video and making sure you are doing all the connections as per connection diagram definitely you will be able to build one as well!
If you enjoyed this video please give me a like and subscribe to my channel to don't miss my next videos, because actually I was not sure how to calibrate the soldering station on this video and soon I will have an other video in how to calibrate and do all the settings on this soldering station because I needed some time to learn this.
Thanks for watching!
@Jacob-vx4zw Күн бұрын
Thank you for this full tutorial with links to buy the parts! You got a new subscriber with a useful video like this. I'm new to soldering and this seems like a good way to get a quality iron for a good price. What type of wire should I use to connect everything? I bought all the components you linked but I'm not sure the wire type was listed. Is there a specific type of connector I should get with the wire?
@SymbolTech21 Күн бұрын
@@Jacob-vx4zw hi there when you get the soldering iron handle please make sure you check the connection diagram of the wires from the connector to the iron tip because you need to modify some pin orientation. About the wires I used for the mains AC voltage stripped a pc power cord and used and from the power supply to controller board used wires from an old pc power supply.
@Johadart Күн бұрын
Hi Tony, awesome video, great build, I’ll be looking into building one of these also, thanks for the links, couple of questions, do you use ferrules for the screw mounts? What is your son’s name? He’s growing very fast. Oh and also just wanted to tell you, the difference in the controller boards, one is LCD and the other is OLED. Just thought I’d let you know.. keep up the amazing work mate 🤙🏼🇦🇺 Joe from Australia 🤙🏼🇦🇺
@SymbolTech21 Күн бұрын
@@Johadart I used some plastic spacers harvested from some old computers to fit the power supply. My son name is Anthony and yea is growing fast already 2 years old soon I need to send him to school. I'm happy to heard that you may want to build one similar soldering station and stay tuned because I learn how to calibrate it and use the settings to make it work properly so I will have an other video about this soon.
@Johadart Күн бұрын
@@SymbolTech21 cool buddy can’t wait to see..
@SymbolTech21 Күн бұрын
@@Johadart hi Joe, if you will use the same soldering handle please check the wires connection from the tip to the connector as per connection diagram from the control board listing link to make sure it's ok because for mine I needed to make some modifications swap some pins around on the connector
@Johadart Күн бұрын
@@SymbolTech21 ok I will do Tony, thankyou for letting me know this.. 🤙🏼🇦🇺
@SymbolTech21 Күн бұрын
@@Johadart also make attention when ordering the soldering handle to have the same connector as the controller board have because you can chose between 2 types of connector
@DeathbyKillerBong 3 күн бұрын
very nice following this project, will probably replicate it.
@SymbolTech21 2 күн бұрын
It's cheap to build and it's really powerful. Definitely much better than my old t12 station
超人夫妇
Рет қаралды 35 МЛН
bigclivedotcom
Рет қаралды 317 М.
SymbolTech
Рет қаралды 1,3 М.