Happy New Year to you all guys! I hope and wish the New Year will be better than the last two years for everyone. Stay safe, keep modeling!

Worst part of the video: “well, thanks for watching this episode!” … stunning work Rahmi … thank you for your effort to bring good content to us! You are the best

Back when these kits came out, they ALWAYS sold out immediately. The story was that Tri-Master was 3 Hasegawa employees who wanted to go out on their own. The kits were light years ahead on anything else mass produced. The plastic was great, the engraving was always fantastic, the p/e was well thought out, and workable, and the white metal (usually landing gear and exhaust stacks) was okayish (I always stuck to the plastic). The ONLY kit that I ever saw that had resin was the TA-152C, and, it was a last ditch effort. The wings were cast in resin. Mine were horrible- short shot, with huge holes, and warped to hell. BUT, that was the only kit that wasn't a home run. Some people say the 152 H is a fiddly, difficult model. It may well be in the re-box, In the tri-master boxing, it was a great build, as long as you stuck to the instructions. You have done a great job on yours! Thank you for sharing! If you look closely, look at where the cockpit is, in relation to the wings. The DB-603 was a HUGE engine, and pushed the cockpit WAAAY back! It must have been a special challenge to get in and out of that plane, especially with a full parachute and other high altitude gear!

Nice model. Don't be afraid of showing the sun-wheel. It's an essential part of the history.

Your airbrush work is insane !

Superb finish! Dragon kits were our holy grails back in the 90's

This man is a pro. Excellent job.

I don't think I've ever seen such a steady, accurate pair of hands ... you make it look much easier than I'm sure it is for us mere mortals!

Outstanding video and presentation.

how beautiful was that plane 👏👏👏👏👏👏👏

Saludos desde Mallorca. Feliz Navidad.🎄🍺👍

Glad to see Leo get featured lol

Great to see what can be done with an older kit.

One of my first serious builds from the early 90's.

I used to make model planes as a teen back in the 1990s, used to hate painting, used to slop it on thick with a brush lol. Randomly started watching model KZfaq channels recently and am blown away by the painting of the models, the airbrush, the techniques etc, pure art. Makes me want to take up the hobby again.

I built this some years ago - I actually left part of the hood open since the engine provided is nice. I’m not a brilliant modeler, but it came out nice and was a lot of fun. A beautiful aircraft.

nice!!! best fight plane of the WWII

my god man your work is always amazing !!!!!!!!!!!!!!!

I have an original Trimaster kit from 1989. I think it's outstanding for it's day. The engine is superb. One day I will build it. Great show and great content!!!!!

Excelente trabajo!!!!!, pero el hilo de la antena debería estar estirado y tenso, no flojo.

Stunning work as always. Your airbrushing is just phenomenal and such an inspiration to us mere mortals :) Keep on modelling!

Very pleasing to the eye your work

*I like how there's just a Leonardo DiCaprio edit to cover up the Swastika* _Amazing Work Scale-a-Ton! I hope to see more of your Work, even if I have to wait Months_

As usual, a beautiful model! I love that you work „safety first“!

Excellent build...I love the techniques!

I love the Wulf in any form and German camo is always a challenge. As always, a masterful job. Thanks for the wonderful content in 2021.

Absolutely great work, i love the worn effects much.

Very inspiring work as ALWAYS!!

Once again another stunning model, Happy New Year to you and looking forward to whatever content you produce in 2022 🎉🎉👍

Thanks for the great work in 2021. You help develop hobby skills. Happy New Year and I hope that in the coming year you will delight us with new works!

Have a healthy and plentiful New Year!

Excellent result 👍

Wonderful work, thanks for sharing

Very well done. Thanks for posting.

Finding Leonardo DiCaprio was like, a where’s Waldo book lol.

Great work on this one! Looks amazing, definitely one of my favorities

That preshading is a masterwork.

I LOVED this kit, it was a joy to build. I just got into the hobby when Tri-Master went out of business, sad day IMO. The FW-190-D9 was also a great kit!!!

A fantastic build of one of my top-five favourite aircraft. Well done sir, and happy New Year when it comes. Liking the choice of music too.

Georgous. Just georgous.. 😀😀😀😀😀

OMG Rahmi! Literally you are keep building the same kits that on my stash as well! Amazing work, congratulations!

Brilliant airbrush work! Happy new year from NZ!

oh yes.. my favorite prop plane.. the slenderjesus

Absolutely gorgeous. Well done indeed. Happy New Year from Australia.

This Looks great! I love the patently made Pattern on the whole plane! And I wish you a happy new year! You inspire me much ☺️ and thank you for showing what string you used in the ending ☺️

Absolutely amazing build, one of my favourite looking ww2 fighters.🙂👍🏻

Great job 👏

Hello Rahmi! This was a nice surprise! I was expecting a 1:72nd kit... 🙂 This high altitude fighter has always intrigued me with its slender, almost fragile appearance... The late Luftwaffe camouflage is pretty challenging and I think you managed to get a good result! Happy New Year and a better one to you too!

Another quality one, have a great new year.

You did an Awesome job on this build!!!!! Fantastic Work!!!!! Happy New Year to you and yours!!!!

Beautiful job that you did! It is great workmanship and perfection at its best 😊👍

Looks fantastic!

Beautiful work!! Happy New Year to You....!

A cracking build! Built a few Dragon kits in my time,I’ve still got a TA 154 in my stash. Incidentally comparable kits were the SF3D sci-fi kits,which were some of the first multi media kits to come out.

Very nice and interessting build. Thanks for sharing this. And a Happy and healthy new year🎉

Really nice build and paint job 👍 Happy New Year 😀

Stunningly beautiful lv it awesome job

As always, amazing...!! Happy new year..!!

Nicely done!

Merci pour cette video, vous me donnez l'envie de reprendre ma maquette trimaster de cet avion que j'avais commencé il y a quelques dizaines d'années.

Fantastic!

Great video!

Simply amazing

I've got 2 of the Tri masters 1 - Later issued Ta, and a brown boxed {yes that early} still in the wrapper 190"D". The white metal is quite nice, and for a kit of that age the detail is very good. But once they became Dragon kits, I stayed away. Very nice build/paint & detail work. Congrats

Brings back old memories... I built one of the original black sided box Tri-master Ta152H-1 kits in 1989 or was it 1990... "MA-9" I think was the SKU. It was not an easy kit to build. There were plenty of details, yes, but a lot if stuff didn't fit very well and gluing thin etched metal parts to plastic was also tricky. I didn't have an airbrush back then, so painting was a chore. I super diluted the acrylic paints and went with about 5 or 6 criss crossing coats of very thin matte paint so there weren't any brush marks. A semi-gloss finish was achieved by buffing the matte paint rather than painting with gloss or semi-gloss paint. This was done before washing for the panel lines and rivet holes. It took about 4 months to finish.

Great vid!!!

Amazing build! Such a beautiful and unique aircraft so rarely seen. I would recommend annealing the PE belts for the pilots seat, it makes them much more malleable and you can form them into more interesting shapes

Superb build Sir!

New subscriber! I love all the tiny details!

Lmao the little Leonardo to hide the swastika was hilarious

Elinize emeğinize sağlık çok güzel ve bilgilendirici bir video olmuş.

Magnificent!

Cool one!

*Amazing result, i think i have this kit somewhere waiting for a build ... 😉👏👏*

Thanks

A beauty.

Brilliant!!!!!!!

Happy New Year..😀

Harika olmuş Üstat. Ellerinize sağlık. İyi seneler. :)

Pro tip paint at least the bottom and back sides of the engine since it is exposed (Its even this way on the real aircraft so still accurate for the rivet counters lol) Dora 9 included... It was considered a production cost and weight saving issue so deemed unnecessary to fully enclose the engine from the gear bay

So great done. Looks very good! ;) All the best for You! ;)

Lovely build, I think some of the Dragon kits were released under the Italeri label also.

Strange looking aircraft. Never seen one before.

Nice!

Very nice! I have a hobbboss TA-152 in the attic it looks like it maybe a little easier to build.

Beautiful work! Cool subject for sure. I must say while watching the antenna cable installation the cable was aloud to sag because of the canopy being open. Actually the cable goes through the canopy and is kept taught on a reel mechanism to take up the slack when opening the canopy...

Very good! Please,1/48 Kinetic Mirage IIIE

That's quite interesting because I got a Revell fw ta 152 in 1/72 at christmas. Your aircraft looks way better tho because mine has no weathering and was painted with brush only.

Lovely finish. Who's that on the tailplane? 😜

Yes!

良質キット👍

Loving this build but I think the wings should have a stronger blue tone but otherwise perfect

Same for modeling stuff here in the USA- nobody is immune from Supply Chain Hell. Looks like 3D printing is maturing just in time. Well, assuming you stocked up on resin/filament...

Hello mate, very nice build and technique showcase...not sure about that undercarriage color, but I am really missing brake hoses for wheels... Anyway, thanks for this video, I wish you too all the best in New Year 2022 :-)

It was beautiful work, but I have questions, such as why you filled the side fuselage. The painting of the engine, the antenna, and even the sealing of the decals. It may sound nit-picky, but I want you to know what you did. Nice model 🎉

I think the radio antenna should be straight, it had a tension device inside the moving canopy.

She is perfect

Nice job! I have 3 questions: First, on what pressure are you painting? Second, how thin are paints? Third, what is the sise of the needle of your airbrush?

The size of that propeller!

Model looks great. I like that finish style. Reminds me models by Chris Wauchop, who is my favourite airplane modeler. Btw. could You tell me what camera You use for recording and pictures?